summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/rt5677.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-12-15 14:52:16 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-12-15 14:52:16 -0300
commit8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be (patch)
treee9891aa6c295060d065adffd610c4f49ecf884f3 /sound/soc/codecs/rt5677.c
parenta71852147516bc1cb5b0b3cbd13639bfd4022dc8 (diff)
Linux-libre 4.3.2-gnu
Diffstat (limited to 'sound/soc/codecs/rt5677.c')
-rw-r--r--sound/soc/codecs/rt5677.c159
1 files changed, 61 insertions, 98 deletions
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 92280f844..f6e92b7b0 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -15,13 +15,12 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
-#include <linux/of_gpio.h>
#include <linux/regmap.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/firmware.h>
-#include <linux/gpio.h>
+#include <linux/property.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -54,7 +53,7 @@ static const struct regmap_range_cfg rt5677_ranges[] = {
},
};
-static const struct reg_default init_list[] = {
+static const struct reg_sequence init_list[] = {
{RT5677_ASRC_12, 0x0018},
{RT5677_PR_BASE + 0x3d, 0x364d},
{RT5677_PR_BASE + 0x17, 0x4fc0},
@@ -746,14 +745,14 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on)
ret = reject_firmware(&rt5677->fw1, RT5677_FIRMWARE1,
codec->dev);
if (ret == 0) {
- rt5677_spi_burst_write(0x50000000, rt5677->fw1);
+ rt5677_spi_write_firmware(0x50000000, rt5677->fw1);
release_firmware(rt5677->fw1);
}
ret = reject_firmware(&rt5677->fw2, RT5677_FIRMWARE2,
codec->dev);
if (ret == 0) {
- rt5677_spi_burst_write(0x60000000, rt5677->fw2);
+ rt5677_spi_write_firmware(0x60000000, rt5677->fw2);
release_firmware(rt5677->fw2);
}
@@ -789,16 +788,15 @@ static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
static const DECLARE_TLV_DB_SCALE(st_vol_tlv, -4650, 150, 0);
/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
-static unsigned int bst_tlv[] = {
- TLV_DB_RANGE_HEAD(7),
+static const DECLARE_TLV_DB_RANGE(bst_tlv,
0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
1, 1, TLV_DB_SCALE_ITEM(2000, 0, 0),
2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
3, 5, TLV_DB_SCALE_ITEM(3000, 500, 0),
6, 6, TLV_DB_SCALE_ITEM(4400, 0, 0),
7, 7, TLV_DB_SCALE_ITEM(5000, 0, 0),
- 8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0),
-};
+ 8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0)
+);
static int rt5677_dsp_vad_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -917,8 +915,11 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
- int idx = rl6231_calc_dmic_clk(rt5677->lrck[RT5677_AIF1] << 8);
+ int idx, rate;
+ rate = rt5677->sysclk / rl6231_get_pre_div(rt5677->regmap,
+ RT5677_CLK_TREE_CTRL1, RT5677_I2S_PD1_SFT);
+ idx = rl6231_calc_dmic_clk(rate);
if (idx < 0)
dev_err(codec->dev, "Failed to set DMIC clock\n");
else
@@ -4764,10 +4765,8 @@ static int rt5677_remove(struct snd_soc_codec *codec)
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec);
- if (gpio_is_valid(rt5677->pow_ldo2))
- gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
- if (gpio_is_valid(rt5677->reset_pin))
- gpio_set_value_cansleep(rt5677->reset_pin, 0);
+ gpiod_set_value_cansleep(rt5677->pow_ldo2, 0);
+ gpiod_set_value_cansleep(rt5677->reset_pin, 0);
return 0;
}
@@ -4781,10 +4780,8 @@ static int rt5677_suspend(struct snd_soc_codec *codec)
regcache_cache_only(rt5677->regmap, true);
regcache_mark_dirty(rt5677->regmap);
- if (gpio_is_valid(rt5677->pow_ldo2))
- gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
- if (gpio_is_valid(rt5677->reset_pin))
- gpio_set_value_cansleep(rt5677->reset_pin, 0);
+ gpiod_set_value_cansleep(rt5677->pow_ldo2, 0);
+ gpiod_set_value_cansleep(rt5677->reset_pin, 0);
}
return 0;
@@ -4795,12 +4792,9 @@ static int rt5677_resume(struct snd_soc_codec *codec)
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
if (!rt5677->dsp_vad_en) {
- if (gpio_is_valid(rt5677->pow_ldo2))
- gpio_set_value_cansleep(rt5677->pow_ldo2, 1);
- if (gpio_is_valid(rt5677->reset_pin))
- gpio_set_value_cansleep(rt5677->reset_pin, 1);
- if (gpio_is_valid(rt5677->pow_ldo2) ||
- gpio_is_valid(rt5677->reset_pin))
+ gpiod_set_value_cansleep(rt5677->pow_ldo2, 1);
+ gpiod_set_value_cansleep(rt5677->reset_pin, 1);
+ if (rt5677->pow_ldo2 || rt5677->reset_pin)
msleep(10);
regcache_cache_only(rt5677->regmap, false);
@@ -4863,7 +4857,7 @@ static int rt5677_write(void *context, unsigned int reg, unsigned int val)
#define RT5677_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8)
-static struct snd_soc_dai_ops rt5677_aif_dai_ops = {
+static const struct snd_soc_dai_ops rt5677_aif_dai_ops = {
.hw_params = rt5677_hw_params,
.set_fmt = rt5677_set_dai_fmt,
.set_sysclk = rt5677_set_dai_sysclk,
@@ -5024,45 +5018,29 @@ static const struct i2c_device_id rt5677_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, rt5677_i2c_id);
-static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np)
+static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
+ struct device *dev)
{
- rt5677->pdata.in1_diff = of_property_read_bool(np,
- "realtek,in1-differential");
- rt5677->pdata.in2_diff = of_property_read_bool(np,
- "realtek,in2-differential");
- rt5677->pdata.lout1_diff = of_property_read_bool(np,
- "realtek,lout1-differential");
- rt5677->pdata.lout2_diff = of_property_read_bool(np,
- "realtek,lout2-differential");
- rt5677->pdata.lout3_diff = of_property_read_bool(np,
- "realtek,lout3-differential");
-
- rt5677->pow_ldo2 = of_get_named_gpio(np,
- "realtek,pow-ldo2-gpio", 0);
- rt5677->reset_pin = of_get_named_gpio(np,
- "realtek,reset-gpio", 0);
-
- /*
- * POW_LDO2 is optional (it may be statically tied on the board).
- * -ENOENT means that the property doesn't exist, i.e. there is no
- * GPIO, so is not an error. Any other error code means the property
- * exists, but could not be parsed.
- */
- if (!gpio_is_valid(rt5677->pow_ldo2) &&
- (rt5677->pow_ldo2 != -ENOENT))
- return rt5677->pow_ldo2;
- if (!gpio_is_valid(rt5677->reset_pin) &&
- (rt5677->reset_pin != -ENOENT))
- return rt5677->reset_pin;
-
- of_property_read_u8_array(np, "realtek,gpio-config",
- rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
-
- of_property_read_u32(np, "realtek,jd1-gpio", &rt5677->pdata.jd1_gpio);
- of_property_read_u32(np, "realtek,jd2-gpio", &rt5677->pdata.jd2_gpio);
- of_property_read_u32(np, "realtek,jd3-gpio", &rt5677->pdata.jd3_gpio);
-
- return 0;
+ rt5677->pdata.in1_diff = device_property_read_bool(dev,
+ "realtek,in1-differential");
+ rt5677->pdata.in2_diff = device_property_read_bool(dev,
+ "realtek,in2-differential");
+ rt5677->pdata.lout1_diff = device_property_read_bool(dev,
+ "realtek,lout1-differential");
+ rt5677->pdata.lout2_diff = device_property_read_bool(dev,
+ "realtek,lout2-differential");
+ rt5677->pdata.lout3_diff = device_property_read_bool(dev,
+ "realtek,lout3-differential");
+
+ device_property_read_u8_array(dev, "realtek,gpio-config",
+ rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
+
+ device_property_read_u32(dev, "realtek,jd1-gpio",
+ &rt5677->pdata.jd1_gpio);
+ device_property_read_u32(dev, "realtek,jd2-gpio",
+ &rt5677->pdata.jd2_gpio);
+ device_property_read_u32(dev, "realtek,jd3-gpio",
+ &rt5677->pdata.jd3_gpio);
}
static struct regmap_irq rt5677_irqs[] = {
@@ -5145,43 +5123,29 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
if (pdata)
rt5677->pdata = *pdata;
+ else
+ rt5677_read_device_properties(rt5677, &i2c->dev);
- if (i2c->dev.of_node) {
- ret = rt5677_parse_dt(rt5677, i2c->dev.of_node);
- if (ret) {
- dev_err(&i2c->dev, "Failed to parse device tree: %d\n",
- ret);
- return ret;
- }
- } else {
- rt5677->pow_ldo2 = -EINVAL;
- rt5677->reset_pin = -EINVAL;
- }
-
- if (gpio_is_valid(rt5677->pow_ldo2)) {
- ret = devm_gpio_request_one(&i2c->dev, rt5677->pow_ldo2,
- GPIOF_OUT_INIT_HIGH,
- "RT5677 POW_LDO2");
- if (ret < 0) {
- dev_err(&i2c->dev, "Failed to request POW_LDO2 %d: %d\n",
- rt5677->pow_ldo2, ret);
- return ret;
- }
+ /* pow-ldo2 and reset are optional. The codec pins may be statically
+ * connected on the board without gpios. If the gpio device property
+ * isn't specified, devm_gpiod_get_optional returns NULL.
+ */
+ rt5677->pow_ldo2 = devm_gpiod_get_optional(&i2c->dev,
+ "realtek,pow-ldo2", GPIOD_OUT_HIGH);
+ if (IS_ERR(rt5677->pow_ldo2)) {
+ ret = PTR_ERR(rt5677->pow_ldo2);
+ dev_err(&i2c->dev, "Failed to request POW_LDO2: %d\n", ret);
+ return ret;
}
-
- if (gpio_is_valid(rt5677->reset_pin)) {
- ret = devm_gpio_request_one(&i2c->dev, rt5677->reset_pin,
- GPIOF_OUT_INIT_HIGH,
- "RT5677 RESET");
- if (ret < 0) {
- dev_err(&i2c->dev, "Failed to request RESET %d: %d\n",
- rt5677->reset_pin, ret);
- return ret;
- }
+ rt5677->reset_pin = devm_gpiod_get_optional(&i2c->dev,
+ "realtek,reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(rt5677->reset_pin)) {
+ ret = PTR_ERR(rt5677->reset_pin);
+ dev_err(&i2c->dev, "Failed to request RESET: %d\n", ret);
+ return ret;
}
- if (gpio_is_valid(rt5677->pow_ldo2) ||
- gpio_is_valid(rt5677->reset_pin)) {
+ if (rt5677->pow_ldo2 || rt5677->reset_pin) {
/* Wait a while until I2C bus becomes available. The datasheet
* does not specify the exact we should wait but startup
* sequence mentiones at least a few milliseconds.
@@ -5209,7 +5173,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
regmap_read(rt5677->regmap, RT5677_VENDOR_ID2, &val);
if (val != RT5677_DEVICE_ID) {
dev_err(&i2c->dev,
- "Device with ID register %x is not rt5677\n", val);
+ "Device with ID register %#x is not rt5677\n", val);
return -ENODEV;
}
@@ -5273,7 +5237,6 @@ static int rt5677_i2c_remove(struct i2c_client *i2c)
static struct i2c_driver rt5677_i2c_driver = {
.driver = {
.name = "rt5677",
- .owner = THIS_MODULE,
},
.probe = rt5677_i2c_probe,
.remove = rt5677_i2c_remove,