Initial import

1 files changed, 497 insertions, 0 deletions

diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c
new file mode 100644
index 000000000..5bf723689
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx-i2s.c
@@ -0,0 +1,497 @@
+/*
+ * s3c24xx-i2s.c  --  ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <mach/dma.h>
+#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>
+#include "regs-iis.h"
+
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+
+static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = {
+	.channel	= DMACH_I2S_OUT,
+	.ch_name	= "tx",
+	.dma_size	= 2,
+};
+
+static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = {
+	.channel	= DMACH_I2S_IN,
+	.ch_name	= "rx",
+	.dma_size	= 2,
+};
+
+struct s3c24xx_i2s_info {
+	void __iomem	*regs;
+	struct clk	*iis_clk;
+	u32		iiscon;
+	u32		iismod;
+	u32		iisfcon;
+	u32		iispsr;
+};
+static struct s3c24xx_i2s_info s3c24xx_i2s;
+
+static void s3c24xx_snd_txctrl(int on)
+{
+	u32 iisfcon;
+	u32 iiscon;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	iiscon  = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	iismod  = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+
+	if (on) {
+		iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE;
+		iiscon  |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN;
+		iiscon  &= ~S3C2410_IISCON_TXIDLE;
+		iismod  |= S3C2410_IISMOD_TXMODE;
+
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+	} else {
+		/* note, we have to disable the FIFOs otherwise bad things
+		 * seem to happen when the DMA stops. According to the
+		 * Samsung supplied kernel, this should allow the DMA
+		 * engine and FIFOs to reset. If this isn't allowed, the
+		 * DMA engine will simply freeze randomly.
+		 */
+
+		iisfcon &= ~S3C2410_IISFCON_TXENABLE;
+		iisfcon &= ~S3C2410_IISFCON_TXDMA;
+		iiscon  |=  S3C2410_IISCON_TXIDLE;
+		iiscon  &= ~S3C2410_IISCON_TXDMAEN;
+		iismod  &= ~S3C2410_IISMOD_TXMODE;
+
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+	}
+
+	pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+}
+
+static void s3c24xx_snd_rxctrl(int on)
+{
+	u32 iisfcon;
+	u32 iiscon;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	iiscon  = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	iismod  = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+
+	if (on) {
+		iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE;
+		iiscon  |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN;
+		iiscon  &= ~S3C2410_IISCON_RXIDLE;
+		iismod  |= S3C2410_IISMOD_RXMODE;
+
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+	} else {
+		/* note, we have to disable the FIFOs otherwise bad things
+		 * seem to happen when the DMA stops. According to the
+		 * Samsung supplied kernel, this should allow the DMA
+		 * engine and FIFOs to reset. If this isn't allowed, the
+		 * DMA engine will simply freeze randomly.
+		 */
+
+		iisfcon &= ~S3C2410_IISFCON_RXENABLE;
+		iisfcon &= ~S3C2410_IISFCON_RXDMA;
+		iiscon  |= S3C2410_IISCON_RXIDLE;
+		iiscon  &= ~S3C2410_IISCON_RXDMAEN;
+		iismod  &= ~S3C2410_IISMOD_RXMODE;
+
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+	}
+
+	pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+}
+
+/*
+ * Wait for the LR signal to allow synchronisation to the L/R clock
+ * from the codec. May only be needed for slave mode.
+ */
+static int s3c24xx_snd_lrsync(void)
+{
+	u32 iiscon;
+	int timeout = 50; /* 5ms */
+
+	pr_debug("Entered %s\n", __func__);
+
+	while (1) {
+		iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+		if (iiscon & S3C2410_IISCON_LRINDEX)
+			break;
+
+		if (!timeout--)
+			return -ETIMEDOUT;
+		udelay(100);
+	}
+
+	return 0;
+}
+
+/*
+ * Check whether CPU is the master or slave
+ */
+static inline int s3c24xx_snd_is_clkmaster(void)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1;
+}
+
+/*
+ * Set S3C24xx I2S DAI format
+ */
+static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
+		unsigned int fmt)
+{
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params r: IISMOD: %x \n", iismod);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iismod |= S3C2410_IISMOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		iismod &= ~S3C2410_IISMOD_SLAVE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_LEFT_J:
+		iismod |= S3C2410_IISMOD_MSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		iismod &= ~S3C2410_IISMOD_MSB;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params w: IISMOD: %x \n", iismod);
+	return 0;
+}
+
+static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct snd_dmaengine_dai_dma_data *dma_data;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	dma_data = snd_soc_dai_get_dma_data(dai, substream);
+
+	/* Working copies of register */
+	iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params r: IISMOD: %x\n", iismod);
+
+	switch (params_width(params)) {
+	case 8:
+		iismod &= ~S3C2410_IISMOD_16BIT;
+		dma_data->addr_width = 1;
+		break;
+	case 16:
+		iismod |= S3C2410_IISMOD_16BIT;
+		dma_data->addr_width = 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params w: IISMOD: %x\n", iismod);
+	return 0;
+}
+
+static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (!s3c24xx_snd_is_clkmaster()) {
+			ret = s3c24xx_snd_lrsync();
+			if (ret)
+				goto exit_err;
+		}
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c24xx_snd_rxctrl(1);
+		else
+			s3c24xx_snd_txctrl(1);
+
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c24xx_snd_rxctrl(0);
+		else
+			s3c24xx_snd_txctrl(0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+exit_err:
+	return ret;
+}
+
+/*
+ * Set S3C24xx Clock source
+ */
+static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
+	int clk_id, unsigned int freq, int dir)
+{
+	u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("Entered %s\n", __func__);
+
+	iismod &= ~S3C2440_IISMOD_MPLL;
+
+	switch (clk_id) {
+	case S3C24XX_CLKSRC_PCLK:
+		break;
+	case S3C24XX_CLKSRC_MPLL:
+		iismod |= S3C2440_IISMOD_MPLL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	return 0;
+}
+
+/*
+ * Set S3C24xx Clock dividers
+ */
+static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
+	int div_id, int div)
+{
+	u32 reg;
+
+	pr_debug("Entered %s\n", __func__);
+
+	switch (div_id) {
+	case S3C24XX_DIV_BCLK:
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK;
+		writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
+		break;
+	case S3C24XX_DIV_MCLK:
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS);
+		writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
+		break;
+	case S3C24XX_DIV_PRESCALER:
+		writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR);
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * To avoid duplicating clock code, allow machine driver to
+ * get the clockrate from here.
+ */
+u32 s3c24xx_i2s_get_clockrate(void)
+{
+	return clk_get_rate(s3c24xx_i2s.iis_clk);
+}
+EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate);
+
+static int s3c24xx_i2s_probe(struct snd_soc_dai *dai)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	samsung_asoc_init_dma_data(dai, &s3c24xx_i2s_pcm_stereo_out,
+		&s3c24xx_i2s_pcm_stereo_in);
+
+	s3c24xx_i2s.iis_clk = devm_clk_get(dai->dev, "iis");
+	if (IS_ERR(s3c24xx_i2s.iis_clk)) {
+		pr_err("failed to get iis_clock\n");
+		return PTR_ERR(s3c24xx_i2s.iis_clk);
+	}
+	clk_prepare_enable(s3c24xx_i2s.iis_clk);
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
+
+	s3c24xx_snd_txctrl(0);
+	s3c24xx_snd_rxctrl(0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR);
+
+	clk_disable_unprepare(s3c24xx_i2s.iis_clk);
+
+	return 0;
+}
+
+static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai)
+{
+	pr_debug("Entered %s\n", __func__);
+	clk_prepare_enable(s3c24xx_i2s.iis_clk);
+
+	writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
+	writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+	writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR);
+
+	return 0;
+}
+#else
+#define s3c24xx_i2s_suspend NULL
+#define s3c24xx_i2s_resume NULL
+#endif
+
+
+#define S3C24XX_I2S_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+static const struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = {
+	.trigger	= s3c24xx_i2s_trigger,
+	.hw_params	= s3c24xx_i2s_hw_params,
+	.set_fmt	= s3c24xx_i2s_set_fmt,
+	.set_clkdiv	= s3c24xx_i2s_set_clkdiv,
+	.set_sysclk	= s3c24xx_i2s_set_sysclk,
+};
+
+static struct snd_soc_dai_driver s3c24xx_i2s_dai = {
+	.probe = s3c24xx_i2s_probe,
+	.suspend = s3c24xx_i2s_suspend,
+	.resume = s3c24xx_i2s_resume,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = S3C24XX_I2S_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = S3C24XX_I2S_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &s3c24xx_i2s_dai_ops,
+};
+
+static const struct snd_soc_component_driver s3c24xx_i2s_component = {
+	.name		= "s3c24xx-i2s",
+};
+
+static int s3c24xx_iis_dev_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Can't get IO resource.\n");
+		return -ENOENT;
+	}
+	s3c24xx_i2s.regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(s3c24xx_i2s.regs))
+		return PTR_ERR(s3c24xx_i2s.regs);
+
+	s3c24xx_i2s_pcm_stereo_out.dma_addr = res->start + S3C2410_IISFIFO;
+	s3c24xx_i2s_pcm_stereo_in.dma_addr = res->start + S3C2410_IISFIFO;
+
+	ret = devm_snd_soc_register_component(&pdev->dev,
+			&s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1);
+	if (ret) {
+		pr_err("failed to register the dai\n");
+		return ret;
+	}
+
+	ret = samsung_asoc_dma_platform_register(&pdev->dev);
+	if (ret)
+		pr_err("failed to register the dma: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver s3c24xx_iis_driver = {
+	.probe  = s3c24xx_iis_dev_probe,
+	.driver = {
+		.name = "s3c24xx-iis",
+	},
+};
+
+module_platform_driver(s3c24xx_iis_driver);
+
+/* Module information */
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("s3c24xx I2S SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c24xx-iis");