Linux-libre 4.8.2-gnupck-4.8.2-gnu

1 files changed, 193 insertions, 0 deletions

diff --git a/tools/hv/bondvf.sh b/tools/hv/bondvf.sh
new file mode 100755
index 000000000..8e9602340
--- /dev/null
+++ b/tools/hv/bondvf.sh
@@ -0,0 +1,193 @@
+#!/bin/bash
+
+# This example script creates bonding network devices based on synthetic NIC
+# (the virtual network adapter usually provided by Hyper-V) and the matching
+# VF NIC (SRIOV virtual function). So the synthetic NIC and VF NIC can
+# function as one network device, and fail over to the synthetic NIC if VF is
+# down.
+#
+# Usage:
+# - After configured vSwitch and vNIC with SRIOV, start Linux virtual
+#   machine (VM)
+# - Run this scripts on the VM. It will create configuration files in
+#   distro specific directory.
+# - Reboot the VM, so that the bonding config are enabled.
+#
+# The config files are DHCP by default. You may edit them if you need to change
+# to Static IP or change other settings.
+#
+
+sysdir=/sys/class/net
+netvsc_cls={f8615163-df3e-46c5-913f-f2d2f965ed0e}
+bondcnt=0
+
+# Detect Distro
+if [ -f /etc/redhat-release ];
+then
+	cfgdir=/etc/sysconfig/network-scripts
+	distro=redhat
+elif grep -q 'Ubuntu' /etc/issue
+then
+	cfgdir=/etc/network
+	distro=ubuntu
+elif grep -q 'SUSE' /etc/issue
+then
+	cfgdir=/etc/sysconfig/network
+	distro=suse
+else
+	echo "Unsupported Distro"
+	exit 1
+fi
+
+echo Detected Distro: $distro, or compatible
+
+# Get a list of ethernet names
+list_eth=(`cd $sysdir && ls -d */ | cut -d/ -f1 | grep -v bond`)
+eth_cnt=${#list_eth[@]}
+
+echo List of net devices:
+
+# Get the MAC addresses
+for (( i=0; i < $eth_cnt; i++ ))
+do
+	list_mac[$i]=`cat $sysdir/${list_eth[$i]}/address`
+	echo ${list_eth[$i]}, ${list_mac[$i]}
+done
+
+# Find NIC with matching MAC
+for (( i=0; i < $eth_cnt-1; i++ ))
+do
+	for (( j=i+1; j < $eth_cnt; j++ ))
+	do
+		if [ "${list_mac[$i]}" = "${list_mac[$j]}" ]
+		then
+			list_match[$i]=${list_eth[$j]}
+			break
+		fi
+	done
+done
+
+function create_eth_cfg_redhat {
+	local fn=$cfgdir/ifcfg-$1
+
+	rm -f $fn
+	echo DEVICE=$1 >>$fn
+	echo TYPE=Ethernet >>$fn
+	echo BOOTPROTO=none >>$fn
+	echo ONBOOT=yes >>$fn
+	echo NM_CONTROLLED=no >>$fn
+	echo PEERDNS=yes >>$fn
+	echo IPV6INIT=yes >>$fn
+	echo MASTER=$2 >>$fn
+	echo SLAVE=yes >>$fn
+}
+
+function create_eth_cfg_pri_redhat {
+	create_eth_cfg_redhat $1 $2
+}
+
+function create_bond_cfg_redhat {
+	local fn=$cfgdir/ifcfg-$1
+
+	rm -f $fn
+	echo DEVICE=$1 >>$fn
+	echo TYPE=Bond >>$fn
+	echo BOOTPROTO=dhcp >>$fn
+	echo ONBOOT=yes >>$fn
+	echo NM_CONTROLLED=no >>$fn
+	echo PEERDNS=yes >>$fn
+	echo IPV6INIT=yes >>$fn
+	echo BONDING_MASTER=yes >>$fn
+	echo BONDING_OPTS=\"mode=active-backup miimon=100 primary=$2\" >>$fn
+}
+
+function create_eth_cfg_ubuntu {
+	local fn=$cfgdir/interfaces
+
+	echo $'\n'auto $1 >>$fn
+	echo iface $1 inet manual >>$fn
+	echo bond-master $2 >>$fn
+}
+
+function create_eth_cfg_pri_ubuntu {
+	local fn=$cfgdir/interfaces
+
+	create_eth_cfg_ubuntu $1 $2
+	echo bond-primary $1 >>$fn
+}
+
+function create_bond_cfg_ubuntu {
+	local fn=$cfgdir/interfaces
+
+	echo $'\n'auto $1 >>$fn
+	echo iface $1 inet dhcp >>$fn
+	echo bond-mode active-backup >>$fn
+	echo bond-miimon 100 >>$fn
+	echo bond-slaves none >>$fn
+}
+
+function create_eth_cfg_suse {
+        local fn=$cfgdir/ifcfg-$1
+
+        rm -f $fn
+	echo BOOTPROTO=none >>$fn
+	echo STARTMODE=auto >>$fn
+}
+
+function create_eth_cfg_pri_suse {
+	create_eth_cfg_suse $1
+}
+
+function create_bond_cfg_suse {
+	local fn=$cfgdir/ifcfg-$1
+
+	rm -f $fn
+	echo BOOTPROTO=dhcp >>$fn
+	echo STARTMODE=auto >>$fn
+	echo BONDING_MASTER=yes >>$fn
+	echo BONDING_SLAVE_0=$2 >>$fn
+	echo BONDING_SLAVE_1=$3 >>$fn
+	echo BONDING_MODULE_OPTS=\'mode=active-backup miimon=100 primary=$2\' >>$fn
+}
+
+function create_bond {
+	local bondname=bond$bondcnt
+	local primary
+	local secondary
+
+	local class_id1=`cat $sysdir/$1/device/class_id 2>/dev/null`
+	local class_id2=`cat $sysdir/$2/device/class_id 2>/dev/null`
+
+	if [ "$class_id1" = "$netvsc_cls" ]
+	then
+		primary=$2
+		secondary=$1
+	elif [ "$class_id2" = "$netvsc_cls" ]
+	then
+		primary=$1
+		secondary=$2
+	else
+		return 0
+	fi
+
+	echo $'\nBond name:' $bondname
+
+	echo configuring $primary
+	create_eth_cfg_pri_$distro $primary $bondname
+
+	echo configuring $secondary
+	create_eth_cfg_$distro $secondary $bondname
+
+	echo creating: $bondname with primary slave: $primary
+	create_bond_cfg_$distro $bondname $primary $secondary
+
+	let bondcnt=bondcnt+1
+}
+
+for (( i=0; i < $eth_cnt-1; i++ ))
+do
+        if [ -n "${list_match[$i]}" ]
+        then
+		create_bond ${list_eth[$i]} ${list_match[$i]}
+        fi
+done