Initial import

13 files changed, 6692 insertions, 0 deletions

diff --git a/tools/testing/ktest/compare-ktest-sample.pl b/tools/testing/ktest/compare-ktest-sample.pl
new file mode 100755
index 000000000..a373a5bff
--- /dev/null
+++ b/tools/testing/ktest/compare-ktest-sample.pl
@@ -0,0 +1,32 @@
+#!/usr/bin/perl
+
+open (IN,"ktest.pl");
+while (<IN>) {
+    # hashes are now used
+    if (/\$opt\{"?([A-Z].*?)(\[.*\])?"?\}/ ||
+	/^\s*"?([A-Z].*?)"?\s*=>\s*/ ||
+	/set_test_option\("(.*?)"/) {
+	$opt{$1} = 1;
+    }
+}
+close IN;
+
+open (IN, "sample.conf");
+while (<IN>) {
+    if (/^\s*#?\s*([A-Z]\S*)\s*=/) {
+	$samp{$1} = 1;
+    }
+}
+close IN;
+
+foreach $opt (keys %opt) {
+    if (!defined($samp{$opt})) {
+	print "opt = $opt\n";
+    }
+}
+
+foreach $samp (keys %samp) {
+    if (!defined($opt{$samp})) {
+	print "samp = $samp\n";
+    }
+}
diff --git a/tools/testing/ktest/examples/README b/tools/testing/ktest/examples/README
new file mode 100644
index 000000000..a12d295a0
--- /dev/null
+++ b/tools/testing/ktest/examples/README
@@ -0,0 +1,32 @@
+This directory contains example configs to use ktest for various tasks.
+The configs still need to be customized for your environment, but it
+is broken up by task which makes it easier to understand how to set up
+ktest.
+
+The configs are based off of real working configs but have been modified
+and commented to show more generic use cases that are more helpful for
+developers.
+
+crosstests.conf - this config shows an example of testing a git repo against
+    lots of different architectures. It only does build tests, but makes
+    it easy to compile test different archs. You can download the arch
+    cross compilers from:
+  http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
+
+test.conf - A generic example of a config. This is based on an actual config
+     used to perform real testing.
+
+kvm.conf - A example of a config that is used to test a virtual guest running
+     on a host.
+
+snowball.conf - An example config that was used to demo ktest.pl against
+     a snowball ARM board.
+
+include/  -  The include directory holds default configs that can be
+    included into other configs. This is a real use example that shows how
+    to reuse configs for various machines or set ups. The files here
+    are included by other config files, where the other config files define
+    options and variables that will make the included config work for the
+    given environment.
+
+
diff --git a/tools/testing/ktest/examples/crosstests.conf b/tools/testing/ktest/examples/crosstests.conf
new file mode 100644
index 000000000..a1203148d
--- /dev/null
+++ b/tools/testing/ktest/examples/crosstests.conf
@@ -0,0 +1,254 @@
+#
+# Example config for cross compiling
+#
+# In this config, it is expected that the tool chains from:
+#
+#   http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
+#
+# running on a x86_64 system have been downloaded and installed into:
+#
+#   /usr/local/
+#
+# such that the compiler binaries are something like:
+#
+#   /usr/local/gcc-4.5.2-nolibc/mips-linux/bin/mips-linux-gcc
+#
+# Some of the archs will use gcc-4.5.1 instead of gcc-4.5.2
+# this config uses variables to differentiate them.
+# 
+# Comments describe some of the options, but full descriptions of
+# options are described in the samples.conf file.
+
+# ${PWD} is defined by ktest.pl to be the directory that the user
+# was in when they executed ktest.pl. It may be better to hardcode the
+# path name here. THIS_DIR is the variable used through out the config file
+# in case you want to change it.
+
+THIS_DIR := ${PWD}
+
+# Update the BUILD_DIR option to the location of your git repo you want to test.
+BUILD_DIR = ${THIS_DIR}/linux.git
+
+# The build will go into this directory. It will be created when you run the test.
+OUTPUT_DIR = ${THIS_DIR}/cross-compile
+
+# The build will be compiled with -j8
+BUILD_OPTIONS = -j8
+
+# The test will not stop when it hits a failure.
+DIE_ON_FAILURE = 0
+
+# If you want to have ktest.pl store the failure somewhere, uncomment this option
+# and change the directory where ktest should store the failures.
+#STORE_FAILURES = ${THIS_DIR}/failures
+
+# The log file is stored in the OUTPUT_DIR called cross.log
+# If you enable this, you need to create the OUTPUT_DIR. It wont be created for you.
+LOG_FILE = ${OUTPUT_DIR}/cross.log
+
+# The log file will be cleared each time you run ktest.
+CLEAR_LOG = 1
+
+# As some archs do not build with the defconfig, they have been marked
+# to be ignored. If you want to test them anyway, change DO_FAILED to 1.
+# If a test that has been marked as DO_FAILED passes, then you should change
+# that test to be DO_DEFAULT
+
+DO_FAILED := 0
+DO_DEFAULT := 1
+
+# By setting both DO_FAILED and DO_DEFAULT to zero, you can pick a single
+# arch that you want to test. (uncomment RUN and chose your arch)
+#RUN := m32r
+
+# At the bottom of the config file exists a bisect test. You can update that
+# test and set DO_FAILED and DO_DEFAULT to zero, and uncomment this variable
+# to run the bisect on the arch.
+#RUN := bisect
+
+# By default all tests will be running gcc 4.5.2. Some tests are using 4.5.1
+# and they select that in the test.
+# Note: GCC_VER is declared as on option and not a variable ('=' instead of ':=')
+# This is important. A variable is used only in the config file and if it is set
+# it stays that way for the rest of the config file until it is change again.
+# Here we want GCC_VER to remain persistent and change for each test, as it is used in
+# the MAKE_CMD. By using '=' instead of ':=' we achieve our goal.
+
+GCC_VER = 4.5.2
+MAKE_CMD = PATH=/usr/local/gcc-${GCC_VER}-nolibc/${CROSS}/bin:$PATH CROSS_COMPILE=${CROSS}- make ARCH=${ARCH}
+
+# all tests are only doing builds.
+TEST_TYPE = build
+
+# If you want to add configs on top of the defconfig, you can add those configs into
+# the add-config file and uncomment this option. This is useful if you want to test
+# all cross compiles with PREEMPT set, or TRACING on, etc.
+#ADD_CONFIG = ${THIS_DIR}/add-config
+
+# All tests are using defconfig
+BUILD_TYPE = defconfig
+
+# The test names will have the arch and cross compiler used. This will be shown in
+# the results.
+TEST_NAME = ${ARCH} ${CROSS}
+
+# alpha
+TEST_START IF ${RUN} == alpha || ${DO_DEFAULT}
+# Notice that CROSS and ARCH are also options and not variables (again '=' instead
+# of ':='). This is because TEST_NAME and MAKE_CMD wil use them for each test.
+# Only options are available during runs. Variables are only present in parsing the
+# config file.
+CROSS = alpha-linux
+ARCH = alpha
+
+# arm
+TEST_START IF ${RUN} == arm || ${DO_DEFAULT}
+CROSS = arm-unknown-linux-gnueabi
+ARCH = arm
+
+# black fin
+TEST_START IF ${RUN} == bfin || ${DO_DEFAULT}
+CROSS = bfin-uclinux
+ARCH = blackfin
+BUILD_OPTIONS = -j8 vmlinux
+
+# cris - FAILS?
+TEST_START IF ${RUN} == cris || ${RUN} == cris64 || ${DO_FAILED}
+CROSS = cris-linux
+ARCH = cris
+
+# cris32 - not right arch?
+TEST_START IF ${RUN} == cris || ${RUN} == cris32 || ${DO_FAILED}
+CROSS = crisv32-linux
+ARCH = cris
+
+# ia64
+TEST_START IF ${RUN} == ia64 || ${DO_DEFAULT}
+CROSS = ia64-linux
+ARCH = ia64
+
+# frv
+TEST_START IF ${RUN} == frv || ${DO_FAILED}
+CROSS = frv-linux
+ARCH = frv
+GCC_VER = 4.5.1
+
+# m68k fails with error?
+TEST_START IF ${RUN} == m68k || ${DO_DEFAULT}
+CROSS = m68k-linux
+ARCH = m68k
+
+# mips64
+TEST_START IF ${RUN} == mips || ${RUN} == mips64 || ${DO_DEFAULT}
+CROSS = mips64-linux
+ARCH = mips
+
+# mips32
+TEST_START IF ${RUN} == mips || ${RUN} == mips32 || ${DO_DEFAULT}
+CROSS = mips-linux
+ARCH = mips
+
+# m32r
+TEST_START IF ${RUN} == m32r || ${DO_FAILED}
+CROSS = m32r-linux
+ARCH = m32r
+GCC_VER = 4.5.1
+BUILD_OPTIONS = -j8 vmlinux
+
+# parisc64 failed?
+TEST_START IF ${RUN} == hppa || ${RUN} == hppa64 || ${DO_FAILED}
+CROSS = hppa64-linux
+ARCH = parisc
+
+# parisc
+TEST_START IF ${RUN} == hppa || ${RUN} == hppa32 || ${DO_FAILED}
+CROSS = hppa-linux
+ARCH = parisc
+
+# ppc
+TEST_START IF ${RUN} == ppc || ${RUN} == ppc32 || ${DO_DEFAULT}
+CROSS = powerpc-linux
+ARCH = powerpc
+
+# ppc64
+TEST_START IF ${RUN} == ppc || ${RUN} == ppc64 || ${DO_DEFAULT}
+CROSS = powerpc64-linux
+ARCH = powerpc
+
+# s390
+TEST_START IF ${RUN} == s390 || ${DO_DEFAULT}
+CROSS = s390x-linux
+ARCH = s390
+
+# sh
+TEST_START IF ${RUN} == sh || ${DO_DEFAULT}
+CROSS = sh4-linux
+ARCH = sh
+
+# sparc64
+TEST_START IF ${RUN} == sparc || ${RUN} == sparc64 || ${DO_DEFAULT}
+CROSS = sparc64-linux
+ARCH = sparc64
+
+# sparc
+TEST_START IF ${RUN} == sparc || ${RUN} == sparc32 || ${DO_DEFAULT}
+CROSS = sparc-linux
+ARCH = sparc
+
+# xtensa failed
+TEST_START IF ${RUN} == xtensa || ${DO_FAILED}
+CROSS = xtensa-linux
+ARCH = xtensa
+
+# UML
+TEST_START IF ${RUN} == uml || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=um SUBARCH=x86_64
+ARCH = uml
+CROSS =
+
+TEST_START IF ${RUN} == x86 || ${RUN} == i386 || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=i386
+ARCH = i386
+CROSS = 
+
+TEST_START IF ${RUN} == x86 || ${RUN} == x86_64 || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=x86_64
+ARCH = x86_64
+CROSS = 
+
+#################################
+
+# This is a bisect if needed. You need to give it a MIN_CONFIG that
+# will be the config file it uses. Basically, just copy the created defconfig
+# for the arch someplace and point MIN_CONFIG to it.
+TEST_START IF ${RUN} == bisect
+MIN_CONFIG = ${THIS_DIR}/min-config
+CROSS = s390x-linux
+ARCH = s390
+TEST_TYPE = bisect
+BISECT_TYPE = build
+BISECT_GOOD = v3.1
+BISECT_BAD = v3.2
+CHECKOUT = v3.2
+
+#################################
+
+# These defaults are needed to keep ktest.pl from complaining. They are
+# ignored because the test does not go pass the build. No install or
+# booting of the target images.
+
+DEFAULTS
+MACHINE = crosstest
+SSH_USER = root
+BUILD_TARGET = cross
+TARGET_IMAGE = image
+POWER_CYCLE = cycle
+CONSOLE = console
+LOCALVERSION = version
+GRUB_MENU = grub
+
+REBOOT_ON_ERROR = 0
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+REBOOT_ON_SUCCESS = 0
+
diff --git a/tools/testing/ktest/examples/include/bisect.conf b/tools/testing/ktest/examples/include/bisect.conf
new file mode 100644
index 000000000..009bea65b
--- /dev/null
+++ b/tools/testing/ktest/examples/include/bisect.conf
@@ -0,0 +1,90 @@
+#
+# This example shows the bisect tests (git bisect and config bisect)
+#
+
+
+# The config that includes this file may define a RUN_TEST
+# variable that will tell this config what test to run.
+# (what to set the TEST option to).
+#
+DEFAULTS IF NOT DEFINED RUN_TEST
+# Requires that hackbench is in the PATH
+RUN_TEST := ${SSH} hackbench 50
+
+
+# Set TEST to 'bisect' to do a normal git bisect. You need
+# to modify the options below to make it bisect the exact
+# commits you are interested in.
+#
+TEST_START IF ${TEST} == bisect
+TEST_TYPE = bisect
+# You must set the commit that was considered good (git bisect good)
+BISECT_GOOD = v3.3
+# You must set the commit that was considered bad (git bisect bad)
+BISECT_BAD = HEAD
+# It's best to specify the branch to checkout before starting the bisect.
+CHECKOUT = origin/master
+# This can be build, boot, or test. Here we are doing a bisect
+# that requires to run a test to know if the bisect was good or bad.
+# The test should exit with 0 on good, non-zero for bad. But see
+# the BISECT_RET_* options in samples.conf to override this.
+BISECT_TYPE = test
+TEST = ${RUN_TEST}
+# It is usually a good idea to confirm that the GOOD and the BAD
+# commits are truly good and bad respectively. Having BISECT_CHECK
+# set to 1 will check both that the good commit works and the bad
+# commit fails. If you only want to check one or the other,
+# set BISECT_CHECK to 'good' or to 'bad'.
+BISECT_CHECK = 1
+#BISECT_CHECK = good
+#BISECT_CHECK = bad
+
+# Usually it's a good idea to specify the exact config you
+# want to use throughout the entire bisect. Here we placed
+# it in the directory we called ktest.pl from and named it
+# 'config-bisect'.
+MIN_CONFIG = ${THIS_DIR}/config-bisect
+# By default, if we are doing a BISECT_TYPE = test run but the
+# build or boot fails, ktest.pl will do a 'git bisect skip'.
+# Uncomment the below option to make ktest stop testing on such
+# an error.
+#BISECT_SKIP = 0
+# Now if you had BISECT_SKIP = 0 and the test fails, you can
+# examine what happened and then do 'git bisect log > /tmp/replay'
+# Set BISECT_REPLAY to /tmp/replay and ktest.pl will run the
+# 'git bisect replay /tmp/replay' before continuing the bisect test.
+#BISECT_REPLAY = /tmp/replay
+# If you used BISECT_REPLAY after the bisect test failed, you may
+# not want to continue the bisect on that commit that failed.
+# By setting BISECT_START to a new commit. ktest.pl will checkout
+# that commit after it has performed the 'git bisect replay' but
+# before it continues running the bisect test.
+#BISECT_START = 2545eb6198e7e1ec50daa0cfc64a4cdfecf24ec9
+
+# Now if you don't trust ktest.pl to make the decisions for you, then
+# set BISECT_MANUAL to 1. This will cause ktest.pl not to decide
+# if the commit was good or bad. Instead, it will ask you to tell
+# it if the current commit was good. In the mean time, you could
+# take the result, load it on any machine you want. Run several tests,
+# or whatever you feel like. Then, when you are happy, you can tell
+# ktest if you think it was good or not and ktest.pl will continue
+# the git bisect. You can even change what commit it is currently at.
+#BISECT_MANUAL = 1
+
+
+# One of the unique tests that ktest does is the config bisect.
+# Currently (which hopefully will be fixed soon), the bad config
+# must be a superset of the good config. This is because it only
+# searches for a config that causes the target to fail. If the
+# good config is not a subset of the bad config, or if the target
+# fails because of a lack of a config, then it will not find
+# the config for you.
+TEST_START IF ${TEST} == config-bisect
+TEST_TYPE = config_bisect
+# set to build, boot, test
+CONFIG_BISECT_TYPE = boot
+# Set the config that is considered bad.
+CONFIG_BISECT = ${THIS_DIR}/config-bad
+# This config is optional. By default it uses the
+# MIN_CONFIG as the good config.
+CONFIG_BISECT_GOOD = ${THIS_DIR}/config-good
diff --git a/tools/testing/ktest/examples/include/defaults.conf b/tools/testing/ktest/examples/include/defaults.conf
new file mode 100644
index 000000000..63a1a83f4
--- /dev/null
+++ b/tools/testing/ktest/examples/include/defaults.conf
@@ -0,0 +1,157 @@
+# This file holds defaults for most the tests. It defines the options that
+# are most common to tests that are likely to be shared.
+#
+# Note, after including this file, a config file may override any option
+# with a DEFAULTS OVERRIDE section.
+#
+
+# For those cases that use the same machine to boot a 64 bit
+# and a 32 bit version. The MACHINE is the DNS name to get to the
+# box (usually different if it was 64 bit or 32 bit) but the
+# BOX here is defined as a variable that will be the name of the box
+# itself. It is useful for calling scripts that will power cycle
+# the box, as only one script needs to be created to power cycle
+# even though the box itself has multiple operating systems on it.
+# By default, BOX and MACHINE are the same.
+
+DEFAULTS IF NOT DEFINED BOX
+BOX := ${MACHINE}
+
+
+# Consider each box as 64 bit box, unless the config including this file
+# has defined BITS = 32
+
+DEFAULTS IF NOT DEFINED BITS
+BITS := 64
+
+
+DEFAULTS
+
+# THIS_DIR is used through out the configs and defaults to ${PWD} which
+# is the directory that ktest.pl was called from.
+
+THIS_DIR := ${PWD}
+
+
+# to organize your configs, having each machine save their configs
+# into a separate directly is useful.
+CONFIG_DIR := ${THIS_DIR}/configs/${MACHINE}
+
+# Reset the log before running each test.
+CLEAR_LOG = 1
+
+# As installing kernels usually requires root privilege, default the
+# user on the target as root. It is also required that the target
+# allows ssh to root from the host without asking for a password.
+
+SSH_USER = root
+
+# For accesing the machine, we will ssh to root@machine.
+SSH := ssh ${SSH_USER}@${MACHINE}
+
+# Update this. The default here is ktest will ssh to the target box
+# and run a script called 'run-test' located on that box.
+TEST = ${SSH} run-test
+
+# Point build dir to the git repo you use
+BUILD_DIR = ${THIS_DIR}/linux.git
+
+# Each machine will have its own output build directory.
+OUTPUT_DIR = ${THIS_DIR}/build/${MACHINE}
+
+# Yes this config is focused on x86 (but ktest works for other archs too)
+BUILD_TARGET = arch/x86/boot/bzImage
+TARGET_IMAGE = /boot/vmlinuz-test
+
+# have directory for the scripts to reboot and power cycle the boxes
+SCRIPTS_DIR := ${THIS_DIR}/scripts
+
+# You can have each box/machine have a script to power cycle it.
+# Name your script <box>-cycle.
+POWER_CYCLE = ${SCRIPTS_DIR}/${BOX}-cycle
+
+# This script is used to power off the box.
+POWER_OFF = ${SCRIPTS_DIR}/${BOX}-poweroff
+
+# Keep your test kernels separate from your other kernels.
+LOCALVERSION = -test
+
+# The /boot/grub/menu.lst is searched for the line:
+#  title Test Kernel
+# and ktest will use that kernel to reboot into.
+# For grub2 or other boot loaders, you need to set BOOT_TYPE
+# to 'script' and define other ways to load the kernel.
+# See snowball.conf example.
+#
+GRUB_MENU = Test Kernel
+
+# The kernel build will use this option.
+BUILD_OPTIONS = -j8
+
+# Keeping the log file with the output dir is convenient.
+LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log
+
+# Each box should have their own minum configuration
+# See min-config.conf
+MIN_CONFIG = ${CONFIG_DIR}/config-min
+
+# For things like randconfigs, there may be configs you find that
+# are already broken, or there may be some configs that you always
+# want set. Uncomment ADD_CONFIG and point it to the make config files
+# that set the configs you want to keep on (or off) in your build.
+# ADD_CONFIG is usually something to add configs to all machines,
+# where as, MIN_CONFIG is specific per machine.
+#ADD_CONFIG = ${THIS_DIR}/config-broken ${THIS_DIR}/config-general
+
+# To speed up reboots for bisects and patchcheck, instead of
+# waiting 60 seconds for the console to be idle, if this line is
+# seen in the console output, ktest will know the good kernel has
+# finished rebooting and it will be able to continue the tests.
+REBOOT_SUCCESS_LINE = ${MACHINE} login:
+
+# The following is different ways to end the test.
+# by setting the variable REBOOT to: none, error, fail or
+# something else, ktest will power cycle or reboot the target box
+# at the end of the tests.
+#
+# REBOOT := none
+#   Don't do anything at the end of the test.
+#
+# REBOOT := error
+#   Reboot the box if ktest detects an error
+#
+# REBOOT := fail
+#   Do not stop on failure, and after all tests are complete
+#   power off the box (for both success and error)
+#   This is good to run over a weekend and you don't want to waste
+#   electricity.
+#
+
+DEFAULTS IF ${REBOOT} == none
+REBOOT_ON_SUCCESS = 0
+REBOOT_ON_ERROR = 0
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+
+DEFAULTS ELSE IF ${REBOOT} == error
+REBOOT_ON_SUCCESS = 0
+REBOOT_ON_ERROR = 1
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+
+DEFAULTS ELSE IF ${REBOOT} == fail
+REBOOT_ON_SUCCESS = 0
+POWEROFF_ON_ERROR = 1
+POWEROFF_ON_SUCCESS = 1
+POWEROFF_AFTER_HALT = 120
+DIE_ON_FAILURE = 0
+
+# Store the failure information into this directory
+# such as the .config, dmesg, and build log.
+STORE_FAILURES = ${THIS_DIR}/failures
+
+DEFAULTS ELSE
+REBOOT_ON_SUCCESS = 1
+REBOOT_ON_ERROR = 1
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
diff --git a/tools/testing/ktest/examples/include/min-config.conf b/tools/testing/ktest/examples/include/min-config.conf
new file mode 100644
index 000000000..c703cc46d
--- /dev/null
+++ b/tools/testing/ktest/examples/include/min-config.conf
@@ -0,0 +1,60 @@
+#
+# This file has some examples for creating a MIN_CONFIG.
+# (A .config file that is the minimum for a machine to boot, or
+#  to boot and make a network connection.)
+#
+# A MIN_CONFIG is very useful as it is the minimum configuration
+# needed to boot a given machine. You can debug someone else's
+# .config by only setting the configs in your MIN_CONFIG. The closer
+# your MIN_CONFIG is to the true minimum set of configs needed to
+# boot your machine, the closer the config you test with will be
+# to the users config that had the failure.
+#
+# The make_min_config test allows you to create a MIN_CONFIG that
+# is truly the minimum set of configs needed to boot a box.
+#
+# In this example, the final config will reside in
+# ${CONFIG_DIR}/config-new-min and ${CONFIG_DIR}/config-new-min-net.
+# Just move one to the location you have set for MIN_CONFIG.
+#
+# The first test creates a MIN_CONFIG that will be the minimum
+# configuration to boot ${MACHINE} and be able to ssh to it.
+#
+# The second test creates a MIN_CONFIG that will only boot
+# the target and most likely will not let you ssh to it. (Notice
+# how the second test uses the first test's result to continue with.
+# This is because the second test config is a subset of the first).
+#
+# The ${CONFIG_DIR}/config-skip (and -net) will hold the configs
+# that ktest.pl found would not boot the target without them set.
+# The config-new-min holds configs that ktest.pl could not test
+# directly because another config that was needed to boot the box
+# selected them. Sometimes it is possible that this file will hold
+# the true minimum configuration. You can test to see if this is
+# the case by running the boot test with BOOT_TYPE = allnoconfig and
+# setting setting the MIN_CONFIG to ${CONFIG_DIR}/config-skip. If the
+# machine still boots, then you can use the config-skip as your MIN_CONFIG.
+#
+# These tests can run for several hours (and perhaps days).
+# It's OK to kill the test with a Ctrl^C. By restarting without
+# modifying this config, ktest.pl will notice that the config-new-min(-net)
+# exists, and will use that instead as the starting point.
+# The USE_OUTPUT_MIN_CONFIG is set to 1 to keep ktest.pl from asking
+# you if you want to use the OUTPUT_MIN_CONFIG as the starting point.
+# By using the OUTPUT_MIN_CONFIG as the starting point will allow ktest.pl to
+# start almost where it left off.
+#
+TEST_START IF ${TEST} == min-config
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${CONFIG_DIR}/config-new-min-net
+IGNORE_CONFIG = ${CONFIG_DIR}/config-skip-net
+MIN_CONFIG_TYPE = test
+TEST = ${SSH} echo hi
+USE_OUTPUT_MIN_CONFIG = 1
+
+TEST_START IF ${TEST} == min-config && ${MULTI}
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${CONFIG_DIR}/config-new-min
+IGNORE_CONFIG = ${CONFIG_DIR}/config-skip
+MIN_CONFIG = ${CONFIG_DIR}/config-new-min-net
+USE_OUTPUT_MIN_CONFIG = 1
diff --git a/tools/testing/ktest/examples/include/patchcheck.conf b/tools/testing/ktest/examples/include/patchcheck.conf
new file mode 100644
index 000000000..0eb0a5ac7
--- /dev/null
+++ b/tools/testing/ktest/examples/include/patchcheck.conf
@@ -0,0 +1,111 @@
+# patchcheck.conf
+#
+# This contains a test that takes two git commits and will test each
+# commit between the two. The build test will look at what files the
+# commit has touched, and if any of those files produce a warning, then
+# the build will fail.
+
+
+# PATCH_START is the commit to begin with and PATCH_END is the commit
+# to end with (inclusive). This is similar to doing a git rebase -i PATCH_START~1
+# and then testing each commit and doing a git rebase --continue.
+# You can use a SHA1, a git tag, or anything that git will accept for a checkout
+
+PATCH_START := HEAD~3
+PATCH_END := HEAD
+
+# Use the oldconfig if build_type wasn't defined
+DEFAULTS IF NOT DEFINED BUILD_TYPE
+DO_BUILD_TYPE := oldconfig
+
+DEFAULTS ELSE
+DO_BUILD_TYPE := ${BUILD_TYPE}
+
+DEFAULTS
+
+
+# Change PATCH_CHECKOUT to be the branch you want to test. The test will
+# do a git checkout of this branch before starting. Obviously both
+# PATCH_START and PATCH_END must be in this branch (and PATCH_START must
+# be contained by PATCH_END).
+
+PATCH_CHECKOUT := test/branch
+
+# Usually it's a good idea to have a set config to use for testing individual
+# patches.
+PATCH_CONFIG := ${CONFIG_DIR}/config-patchcheck
+
+# Change PATCH_TEST to run some test for each patch. Each commit that is
+# tested, after it is built and installed on the test machine, this command
+# will be executed. Usually what is done is to ssh to the target box and
+# run some test scripts. If you just want to boot test your patches
+# comment PATCH_TEST out.
+PATCH_TEST := ${SSH} "/usr/local/bin/ktest-test-script"
+
+DEFAULTS IF DEFINED PATCH_TEST
+PATCH_TEST_TYPE := test
+
+DEFAULTS ELSE
+PATCH_TEST_TYPE := boot
+
+# If for some reason a file has a warning that one of your patches touch
+# but you do not care about it, set IGNORE_WARNINGS to that commit(s)
+# (space delimited)
+#IGNORE_WARNINGS = 39eaf7ef884dcc44f7ff1bac803ca2a1dcf43544 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce
+
+# Instead of just checking for warnings to files that are changed
+# it can be advantageous to check for any new warnings. If a
+# header file is changed, it could cause a warning in a file not
+# touched by the commit. To detect these kinds of warnings, you
+# can use the WARNINGS_FILE option.
+#
+# If the variable CREATE_WARNINGS_FILE is set, this config will
+# enable the WARNINGS_FILE during the patchcheck test. Also,
+# before running the patchcheck test, it will create the
+# warnings file.
+#
+DEFAULTS IF DEFINED CREATE_WARNINGS_FILE
+WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
+TEST_START IF DEFINED CREATE_WARNINGS_FILE
+# WARNINGS_FILE is already set by the DEFAULTS above
+TEST_TYPE = make_warnings_file
+# Checkout the commit before the patches to test,
+# and record all the warnings that exist before the patches
+# to test are added
+CHECKOUT = ${PATCHCHECK_START}~1
+# Force a full build
+BUILD_NOCLEAN = 0
+BUILD_TYPE = ${DO_BUILD_TYPE}
+
+# If you are running a multi test, and the test failed on the first
+# test but on, say the 5th patch. If you want to restart on the
+# fifth patch, set PATCH_START1. This will make the first test start
+# from this commit instead of the PATCH_START commit.
+# Note, do not change this option. Just define PATCH_START1 in the
+# top config (the one you pass to ktest.pl), and this will use it,
+# otherwise it will just use PATCH_START if PATCH_START1 is not defined.
+DEFAULTS IF NOT DEFINED PATCH_START1
+PATCH_START1 := ${PATCH_START}
+
+TEST_START IF ${TEST} == patchcheck
+TEST_TYPE = patchcheck
+MIN_CONFIG = ${PATCH_CONFIG}
+TEST = ${PATCH_TEST}
+PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
+PATCHCHECK_START = ${PATCH_START1}
+PATCHCHECK_END = ${PATCH_END}
+CHECKOUT = ${PATCH_CHECKOUT}
+BUILD_TYPE = ${DO_BUILD_TYPE}
+
+TEST_START IF ${TEST} == patchcheck && ${MULTI}
+TEST_TYPE = patchcheck
+MIN_CONFIG = ${PATCH_CONFIG}
+TEST = ${PATCH_TEST}
+PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
+PATCHCHECK_START = ${PATCH_START}
+PATCHCHECK_END = ${PATCH_END}
+CHECKOUT = ${PATCH_CHECKOUT}
+# Use multi to test different compilers?
+MAKE_CMD = CC=gcc-4.5.1 make
+BUILD_TYPE = ${DO_BUILD_TYPE}
diff --git a/tools/testing/ktest/examples/include/tests.conf b/tools/testing/ktest/examples/include/tests.conf
new file mode 100644
index 000000000..60cedb1a1
--- /dev/null
+++ b/tools/testing/ktest/examples/include/tests.conf
@@ -0,0 +1,74 @@
+#
+# This is an example of various tests that you can run
+#
+# The variable TEST can be of boot, build, randconfig, or test.
+#
+# Note that TEST is a variable created with ':=' and only exists
+# throughout the config processing (not during the tests itself).
+#
+# The TEST option (defined with '=') is used to tell ktest.pl
+# what test to run after a successful boot. The TEST option is
+# persistent into the test runs.
+#
+
+# The config that includes this file may define a BOOT_TYPE
+# variable that tells this config what type of boot test to run.
+# If it's not defined, the below DEFAULTS will set the default
+# to 'oldconfig'.
+#
+DEFAULTS IF NOT DEFINED BOOT_TYPE
+BOOT_TYPE := oldconfig
+
+# The config that includes this file may define a RUN_TEST
+# variable that will tell this config what test to run.
+# (what to set the TEST option to).
+#
+DEFAULTS IF NOT DEFINED RUN_TEST
+# Requires that hackbench is in the PATH
+RUN_TEST := ${SSH} hackbench 50
+
+
+# If TEST is set to 'boot' then just build a kernel and boot
+# the target.
+TEST_START IF ${TEST} == boot
+TEST_TYPE = boot
+# Notice how we set the BUILD_TYPE option to the BOOT_TYPE variable.
+BUILD_TYPE = ${BOOT_TYPE}
+# Do not do a make mrproper.
+BUILD_NOCLEAN = 1
+
+# If you only want to build the kernel, and perhaps install
+# and test it yourself, then just set TEST to build.
+TEST_START IF ${TEST} == build
+TEST_TYPE = build
+BUILD_TYPE = ${BOOT_TYPE}
+BUILD_NOCLEAN = 1
+
+# Build, install, boot and test with a randconfg 10 times.
+# It is important that you have set MIN_CONFIG in the config
+# that includes this file otherwise it is likely that the
+# randconfig will not have the necessary configs needed to
+# boot your box. This version of the test requires a min
+# config that has enough to make sure the target has network
+# working.
+TEST_START ITERATE 10 IF ${TEST} == randconfig
+MIN_CONFIG = ${CONFIG_DIR}/config-min-net
+TEST_TYPE = test
+BUILD_TYPE = randconfig
+TEST = ${RUN_TEST}
+
+# This is the same as above, but only tests to a boot prompt.
+# The MIN_CONFIG used here does not need to have networking
+# working.
+TEST_START ITERATE 10 IF ${TEST} == randconfig && ${MULTI}
+TEST_TYPE = boot
+BUILD_TYPE = randconfig
+MIN_CONFIG = ${CONFIG_DIR}/config-min
+MAKE_CMD = make
+
+# This builds, installs, boots and tests the target.
+TEST_START IF ${TEST} == test
+TEST_TYPE = test
+BUILD_TYPE = ${BOOT_TYPE}
+TEST = ${RUN_TEST}
+BUILD_NOCLEAN = 1
diff --git a/tools/testing/ktest/examples/kvm.conf b/tools/testing/ktest/examples/kvm.conf
new file mode 100644
index 000000000..fbc134f9a
--- /dev/null
+++ b/tools/testing/ktest/examples/kvm.conf
@@ -0,0 +1,92 @@
+#
+# This config is an example usage of ktest.pl with a kvm guest
+#
+# The guest is called 'Guest' and this would be something that
+# could be run on the host to test a virtual machine target.
+
+MACHINE = Guest
+
+
+# Use virsh to read the serial console of the guest
+CONSOLE =  virsh console ${MACHINE}
+
+# Use SIGKILL to terminate virsh console. We can't kill virsh console
+# by the default signal, SIGINT.
+CLOSE_CONSOLE_SIGNAL = KILL
+
+#*************************************#
+# This part is the same as test.conf  #
+#*************************************#
+
+# The include files will set up the type of test to run. Just set TEST to
+# which test you want to run.
+#
+# TESTS = patchcheck, randconfig, boot, test, config-bisect, bisect, min-config
+#
+# See the include/*.conf files that define these tests
+#
+TEST := patchcheck
+
+# Some tests may have more than one test to run. Define MULTI := 1 to run
+# the extra tests.
+MULTI := 0
+
+# In case you want to differentiate which type of system you are testing
+BITS := 64
+
+# REBOOT = none, error, fail, empty
+#  See include/defaults.conf
+REBOOT := empty
+
+
+# The defaults file will set up various settings that can be used by all
+# machine configs.
+INCLUDE include/defaults.conf
+
+
+#*************************************#
+# Now we are different from test.conf #
+#*************************************#
+
+
+# The example here assumes that Guest is running a Fedora release
+# that uses dracut for its initfs. The POST_INSTALL will be executed
+# after the install of the kernel and modules are complete.
+#
+POST_INSTALL = ${SSH} /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+
+# Guests sometimes get stuck on reboot. We wait 3 seconds after running
+# the reboot command and then  do a full power-cycle of the guest.
+# This forces the guest to restart.
+#
+POWERCYCLE_AFTER_REBOOT = 3
+
+# We do the same after the halt command, but this time we wait 20 seconds.
+POWEROFF_AFTER_HALT = 20
+
+
+# As the defaults.conf file has a POWER_CYCLE option already defined,
+# and options can not be defined in the same section more than once
+# (all DEFAULTS sections are considered the same). We use the
+# DEFAULTS OVERRIDE to tell ktest.pl to ignore the previous defined
+# options, for the options set in the OVERRIDE section.
+#
+DEFAULTS OVERRIDE
+
+# Instead of using the default POWER_CYCLE option defined in
+# defaults.conf, we use virsh to cycle it. To do so, we destroy
+# the guest, wait 5 seconds, and then start it up again.
+# Crude, but effective.
+#
+POWER_CYCLE = virsh destroy ${MACHINE}; sleep 5; virsh start ${MACHINE}
+
+
+DEFAULTS
+
+# The following files each handle a different test case.
+# Having them included allows you to set up more than one machine and share
+# the same tests.
+INCLUDE include/patchcheck.conf
+INCLUDE include/tests.conf
+INCLUDE include/bisect.conf
+INCLUDE include/min-config.conf
diff --git a/tools/testing/ktest/examples/snowball.conf b/tools/testing/ktest/examples/snowball.conf
new file mode 100644
index 000000000..a82a3c5bc
--- /dev/null
+++ b/tools/testing/ktest/examples/snowball.conf
@@ -0,0 +1,53 @@
+# This example was used to boot the snowball ARM board.
+# See http://people.redhat.com/srostedt/ktest-embedded-2012/
+
+# PWD is a ktest.pl variable that will result in the process working
+# directory that ktest.pl is executed in.
+
+# THIS_DIR is automatically assigned the PWD of the path that generated
+# the config file. It is best to use this variable when assigning other
+# directory paths within this directory. This allows you to easily
+# move the test cases to other locations or to other machines.
+#
+THIS_DIR := /home/rostedt/work/demo/ktest-embed
+LOG_FILE = ${OUTPUT_DIR}/snowball.log
+CLEAR_LOG = 1
+MAKE_CMD = PATH=/usr/local/gcc-4.5.2-nolibc/arm-unknown-linux-gnueabi/bin:$PATH CROSS_COMPILE=arm-unknown-linux-gnueabi- make ARCH=arm
+ADD_CONFIG = ${THIS_DIR}/addconfig
+
+SCP_TO_TARGET = echo "don't do scp"
+
+TFTPBOOT := /var/lib/tftpboot
+TFTPDEF := ${TFTPBOOT}/snowball-default
+TFTPTEST := ${OUTPUT_DIR}/${BUILD_TARGET}
+
+SWITCH_TO_GOOD = cp ${TFTPDEF} ${TARGET_IMAGE}
+SWITCH_TO_TEST = cp ${TFTPTEST} ${TARGET_IMAGE}
+
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START SKIP
+TEST_TYPE = boot
+BUILD_TYPE = u8500_defconfig
+BUILD_NOCLEAN = 1
+
+TEST_START
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${THIS_DIR}/config.newmin
+START_MIN_CONFIG = ${THIS_DIR}/config.orig
+IGNORE_CONFIG = ${THIS_DIR}/config.ignore
+BUILD_NOCLEAN = 1
+
+
+DEFAULTS
+LOCALVERSION = -test
+POWER_CYCLE = echo use the thumb luke; read a
+CONSOLE = cat ${THIS_DIR}/snowball-cat
+REBOOT_TYPE = script
+SSH_USER = root
+BUILD_OPTIONS = -j8 uImage
+BUILD_DIR = ${THIS_DIR}/linux.git
+OUTPUT_DIR = ${THIS_DIR}/snowball-build
+MACHINE = snowball
+TARGET_IMAGE = /var/lib/tftpboot/snowball-image
+BUILD_TARGET = arch/arm/boot/uImage
diff --git a/tools/testing/ktest/examples/test.conf b/tools/testing/ktest/examples/test.conf
new file mode 100644
index 000000000..b725210ef
--- /dev/null
+++ b/tools/testing/ktest/examples/test.conf
@@ -0,0 +1,62 @@
+#
+# Generic config for a machine
+#
+
+# Name your machine (the DNS name, what you ssh to)
+MACHINE = foo
+
+# BOX can be different than foo, if the machine BOX has
+# multiple partitions with different systems installed. For example,
+# you may have a i386 and x86_64 installation on a test box.
+# If this is the case, MACHINE defines the way to connect to the
+# machine, which may be different between which system the machine
+# is booting into. BOX is used for the scripts to reboot and power cycle
+# the machine, where it does not matter which system the machine boots into.
+#
+#BOX := bar
+
+# Define a way to read the console
+CONSOLE = stty -F /dev/ttyS0 115200 parodd; cat /dev/ttyS0
+
+# The include files will set up the type of test to run. Just set TEST to
+# which test you want to run.
+#
+# TESTS = patchcheck, randconfig, boot, test, config-bisect, bisect, min-config
+#
+# See the include/*.conf files that define these tests
+#
+TEST := patchcheck
+
+# Some tests may have more than one test to run. Define MULTI := 1 to run
+# the extra tests.
+MULTI := 0
+
+# In case you want to differentiate which type of system you are testing
+BITS := 64
+
+# REBOOT = none, error, fail, empty
+#  See include/defaults.conf
+REBOOT := empty
+
+# The defaults file will set up various settings that can be used by all
+# machine configs.
+INCLUDE include/defaults.conf
+
+# In case you need to add a patch for a bisect or something
+#PRE_BUILD = patch -p1 < ${THIS_DIR}/fix.patch
+
+# Reset the repo after the build and remove all 'test' modules from the target
+# Notice that DO_POST_BUILD is a variable (defined by ':=') and POST_BUILD
+# is the option (defined by '=')
+
+DO_POST_BUILD := git reset --hard
+POST_BUILD = ${SSH} 'rm -rf /lib/modules/*-test*'; ${DO_POST_BUILD}
+
+# The following files each handle a different test case.
+# Having them included allows you to set up more than one machine and share
+# the same tests.
+INCLUDE include/patchcheck.conf
+INCLUDE include/tests.conf
+INCLUDE include/bisect.conf
+INCLUDE include/min-config.conf
+
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
new file mode 100755
index 000000000..d08e214ec
--- /dev/null
+++ b/tools/testing/ktest/ktest.pl
@@ -0,0 +1,4387 @@
+#!/usr/bin/perl -w
+#
+# Copyright 2010 - Steven Rostedt <srostedt@redhat.com>, Red Hat Inc.
+# Licensed under the terms of the GNU GPL License version 2
+#
+
+use strict;
+use IPC::Open2;
+use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK);
+use File::Path qw(mkpath);
+use File::Copy qw(cp);
+use FileHandle;
+
+my $VERSION = "0.2";
+
+$| = 1;
+
+my %opt;
+my %repeat_tests;
+my %repeats;
+my %evals;
+
+#default opts
+my %default = (
+    "NUM_TESTS"			=> 1,
+    "TEST_TYPE"			=> "build",
+    "BUILD_TYPE"		=> "randconfig",
+    "MAKE_CMD"			=> "make",
+    "CLOSE_CONSOLE_SIGNAL"	=> "INT",
+    "TIMEOUT"			=> 120,
+    "TMP_DIR"			=> "/tmp/ktest/\${MACHINE}",
+    "SLEEP_TIME"		=> 60,	# sleep time between tests
+    "BUILD_NOCLEAN"		=> 0,
+    "REBOOT_ON_ERROR"		=> 0,
+    "POWEROFF_ON_ERROR"		=> 0,
+    "REBOOT_ON_SUCCESS"		=> 1,
+    "POWEROFF_ON_SUCCESS"	=> 0,
+    "BUILD_OPTIONS"		=> "",
+    "BISECT_SLEEP_TIME"		=> 60,   # sleep time between bisects
+    "PATCHCHECK_SLEEP_TIME"	=> 60, # sleep time between patch checks
+    "CLEAR_LOG"			=> 0,
+    "BISECT_MANUAL"		=> 0,
+    "BISECT_SKIP"		=> 1,
+    "BISECT_TRIES"		=> 1,
+    "MIN_CONFIG_TYPE"		=> "boot",
+    "SUCCESS_LINE"		=> "login:",
+    "DETECT_TRIPLE_FAULT"	=> 1,
+    "NO_INSTALL"		=> 0,
+    "BOOTED_TIMEOUT"		=> 1,
+    "DIE_ON_FAILURE"		=> 1,
+    "SSH_EXEC"			=> "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND",
+    "SCP_TO_TARGET"		=> "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE",
+    "SCP_TO_TARGET_INSTALL"	=> "\${SCP_TO_TARGET}",
+    "REBOOT"			=> "ssh \$SSH_USER\@\$MACHINE reboot",
+    "STOP_AFTER_SUCCESS"	=> 10,
+    "STOP_AFTER_FAILURE"	=> 60,
+    "STOP_TEST_AFTER"		=> 600,
+    "MAX_MONITOR_WAIT"		=> 1800,
+    "GRUB_REBOOT"		=> "grub2-reboot",
+    "SYSLINUX"			=> "extlinux",
+    "SYSLINUX_PATH"		=> "/boot/extlinux",
+
+# required, and we will ask users if they don't have them but we keep the default
+# value something that is common.
+    "REBOOT_TYPE"		=> "grub",
+    "LOCALVERSION"		=> "-test",
+    "SSH_USER"			=> "root",
+    "BUILD_TARGET"	 	=> "arch/x86/boot/bzImage",
+    "TARGET_IMAGE"		=> "/boot/vmlinuz-test",
+
+    "LOG_FILE"			=> undef,
+    "IGNORE_UNUSED"		=> 0,
+);
+
+my $ktest_config = "ktest.conf";
+my $version;
+my $have_version = 0;
+my $machine;
+my $last_machine;
+my $ssh_user;
+my $tmpdir;
+my $builddir;
+my $outputdir;
+my $output_config;
+my $test_type;
+my $build_type;
+my $build_options;
+my $final_post_ktest;
+my $pre_ktest;
+my $post_ktest;
+my $pre_test;
+my $post_test;
+my $pre_build;
+my $post_build;
+my $pre_build_die;
+my $post_build_die;
+my $reboot_type;
+my $reboot_script;
+my $power_cycle;
+my $reboot;
+my $reboot_on_error;
+my $switch_to_good;
+my $switch_to_test;
+my $poweroff_on_error;
+my $reboot_on_success;
+my $die_on_failure;
+my $powercycle_after_reboot;
+my $poweroff_after_halt;
+my $max_monitor_wait;
+my $ssh_exec;
+my $scp_to_target;
+my $scp_to_target_install;
+my $power_off;
+my $grub_menu;
+my $last_grub_menu;
+my $grub_file;
+my $grub_number;
+my $grub_reboot;
+my $syslinux;
+my $syslinux_path;
+my $syslinux_label;
+my $target;
+my $make;
+my $pre_install;
+my $post_install;
+my $no_install;
+my $noclean;
+my $minconfig;
+my $start_minconfig;
+my $start_minconfig_defined;
+my $output_minconfig;
+my $minconfig_type;
+my $use_output_minconfig;
+my $warnings_file;
+my $ignore_config;
+my $ignore_errors;
+my $addconfig;
+my $in_bisect = 0;
+my $bisect_bad_commit = "";
+my $reverse_bisect;
+my $bisect_manual;
+my $bisect_skip;
+my $bisect_tries;
+my $config_bisect_good;
+my $bisect_ret_good;
+my $bisect_ret_bad;
+my $bisect_ret_skip;
+my $bisect_ret_abort;
+my $bisect_ret_default;
+my $in_patchcheck = 0;
+my $run_test;
+my $buildlog;
+my $testlog;
+my $dmesg;
+my $monitor_fp;
+my $monitor_pid;
+my $monitor_cnt = 0;
+my $sleep_time;
+my $bisect_sleep_time;
+my $patchcheck_sleep_time;
+my $ignore_warnings;
+my $store_failures;
+my $store_successes;
+my $test_name;
+my $timeout;
+my $booted_timeout;
+my $detect_triplefault;
+my $console;
+my $close_console_signal;
+my $reboot_success_line;
+my $success_line;
+my $stop_after_success;
+my $stop_after_failure;
+my $stop_test_after;
+my $build_target;
+my $target_image;
+my $checkout;
+my $localversion;
+my $iteration = 0;
+my $successes = 0;
+my $stty_orig;
+
+my $bisect_good;
+my $bisect_bad;
+my $bisect_type;
+my $bisect_start;
+my $bisect_replay;
+my $bisect_files;
+my $bisect_reverse;
+my $bisect_check;
+
+my $config_bisect;
+my $config_bisect_type;
+my $config_bisect_check;
+
+my $patchcheck_type;
+my $patchcheck_start;
+my $patchcheck_cherry;
+my $patchcheck_end;
+
+my $build_time;
+my $install_time;
+my $reboot_time;
+my $test_time;
+
+# set when a test is something other that just building or install
+# which would require more options.
+my $buildonly = 1;
+
+# tell build not to worry about warnings, even when WARNINGS_FILE is set
+my $warnings_ok = 0;
+
+# set when creating a new config
+my $newconfig = 0;
+
+my %entered_configs;
+my %config_help;
+my %variable;
+
+# force_config is the list of configs that we force enabled (or disabled)
+# in a .config file. The MIN_CONFIG and ADD_CONFIG configs.
+my %force_config;
+
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# reboot on success
+my $reboot_success = 0;
+
+my %option_map = (
+    "MACHINE"			=> \$machine,
+    "SSH_USER"			=> \$ssh_user,
+    "TMP_DIR"			=> \$tmpdir,
+    "OUTPUT_DIR"		=> \$outputdir,
+    "BUILD_DIR"			=> \$builddir,
+    "TEST_TYPE"			=> \$test_type,
+    "PRE_KTEST"			=> \$pre_ktest,
+    "POST_KTEST"		=> \$post_ktest,
+    "PRE_TEST"			=> \$pre_test,
+    "POST_TEST"			=> \$post_test,
+    "BUILD_TYPE"		=> \$build_type,
+    "BUILD_OPTIONS"		=> \$build_options,
+    "PRE_BUILD"			=> \$pre_build,
+    "POST_BUILD"		=> \$post_build,
+    "PRE_BUILD_DIE"		=> \$pre_build_die,
+    "POST_BUILD_DIE"		=> \$post_build_die,
+    "POWER_CYCLE"		=> \$power_cycle,
+    "REBOOT"			=> \$reboot,
+    "BUILD_NOCLEAN"		=> \$noclean,
+    "MIN_CONFIG"		=> \$minconfig,
+    "OUTPUT_MIN_CONFIG"		=> \$output_minconfig,
+    "START_MIN_CONFIG"		=> \$start_minconfig,
+    "MIN_CONFIG_TYPE"		=> \$minconfig_type,
+    "USE_OUTPUT_MIN_CONFIG"	=> \$use_output_minconfig,
+    "WARNINGS_FILE"		=> \$warnings_file,
+    "IGNORE_CONFIG"		=> \$ignore_config,
+    "TEST"			=> \$run_test,
+    "ADD_CONFIG"		=> \$addconfig,
+    "REBOOT_TYPE"		=> \$reboot_type,
+    "GRUB_MENU"			=> \$grub_menu,
+    "GRUB_FILE"			=> \$grub_file,
+    "GRUB_REBOOT"		=> \$grub_reboot,
+    "SYSLINUX"			=> \$syslinux,
+    "SYSLINUX_PATH"		=> \$syslinux_path,
+    "SYSLINUX_LABEL"		=> \$syslinux_label,
+    "PRE_INSTALL"		=> \$pre_install,
+    "POST_INSTALL"		=> \$post_install,
+    "NO_INSTALL"		=> \$no_install,
+    "REBOOT_SCRIPT"		=> \$reboot_script,
+    "REBOOT_ON_ERROR"		=> \$reboot_on_error,
+    "SWITCH_TO_GOOD"		=> \$switch_to_good,
+    "SWITCH_TO_TEST"		=> \$switch_to_test,
+    "POWEROFF_ON_ERROR"		=> \$poweroff_on_error,
+    "REBOOT_ON_SUCCESS"		=> \$reboot_on_success,
+    "DIE_ON_FAILURE"		=> \$die_on_failure,
+    "POWER_OFF"			=> \$power_off,
+    "POWERCYCLE_AFTER_REBOOT"	=> \$powercycle_after_reboot,
+    "POWEROFF_AFTER_HALT"	=> \$poweroff_after_halt,
+    "MAX_MONITOR_WAIT"		=> \$max_monitor_wait,
+    "SLEEP_TIME"		=> \$sleep_time,
+    "BISECT_SLEEP_TIME"		=> \$bisect_sleep_time,
+    "PATCHCHECK_SLEEP_TIME"	=> \$patchcheck_sleep_time,
+    "IGNORE_WARNINGS"		=> \$ignore_warnings,
+    "IGNORE_ERRORS"		=> \$ignore_errors,
+    "BISECT_MANUAL"		=> \$bisect_manual,
+    "BISECT_SKIP"		=> \$bisect_skip,
+    "BISECT_TRIES"		=> \$bisect_tries,
+    "CONFIG_BISECT_GOOD"	=> \$config_bisect_good,
+    "BISECT_RET_GOOD"		=> \$bisect_ret_good,
+    "BISECT_RET_BAD"		=> \$bisect_ret_bad,
+    "BISECT_RET_SKIP"		=> \$bisect_ret_skip,
+    "BISECT_RET_ABORT"		=> \$bisect_ret_abort,
+    "BISECT_RET_DEFAULT"	=> \$bisect_ret_default,
+    "STORE_FAILURES"		=> \$store_failures,
+    "STORE_SUCCESSES"		=> \$store_successes,
+    "TEST_NAME"			=> \$test_name,
+    "TIMEOUT"			=> \$timeout,
+    "BOOTED_TIMEOUT"		=> \$booted_timeout,
+    "CONSOLE"			=> \$console,
+    "CLOSE_CONSOLE_SIGNAL"	=> \$close_console_signal,
+    "DETECT_TRIPLE_FAULT"	=> \$detect_triplefault,
+    "SUCCESS_LINE"		=> \$success_line,
+    "REBOOT_SUCCESS_LINE"	=> \$reboot_success_line,
+    "STOP_AFTER_SUCCESS"	=> \$stop_after_success,
+    "STOP_AFTER_FAILURE"	=> \$stop_after_failure,
+    "STOP_TEST_AFTER"		=> \$stop_test_after,
+    "BUILD_TARGET"		=> \$build_target,
+    "SSH_EXEC"			=> \$ssh_exec,
+    "SCP_TO_TARGET"		=> \$scp_to_target,
+    "SCP_TO_TARGET_INSTALL"	=> \$scp_to_target_install,
+    "CHECKOUT"			=> \$checkout,
+    "TARGET_IMAGE"		=> \$target_image,
+    "LOCALVERSION"		=> \$localversion,
+
+    "BISECT_GOOD"		=> \$bisect_good,
+    "BISECT_BAD"		=> \$bisect_bad,
+    "BISECT_TYPE"		=> \$bisect_type,
+    "BISECT_START"		=> \$bisect_start,
+    "BISECT_REPLAY"		=> \$bisect_replay,
+    "BISECT_FILES"		=> \$bisect_files,
+    "BISECT_REVERSE"		=> \$bisect_reverse,
+    "BISECT_CHECK"		=> \$bisect_check,
+
+    "CONFIG_BISECT"		=> \$config_bisect,
+    "CONFIG_BISECT_TYPE"	=> \$config_bisect_type,
+    "CONFIG_BISECT_CHECK"	=> \$config_bisect_check,
+
+    "PATCHCHECK_TYPE"		=> \$patchcheck_type,
+    "PATCHCHECK_START"		=> \$patchcheck_start,
+    "PATCHCHECK_CHERRY"		=> \$patchcheck_cherry,
+    "PATCHCHECK_END"		=> \$patchcheck_end,
+);
+
+# Options may be used by other options, record them.
+my %used_options;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
+$config_help{"MACHINE"} = << "EOF"
+ The machine hostname that you will test.
+ For build only tests, it is still needed to differentiate log files.
+EOF
+    ;
+$config_help{"SSH_USER"} = << "EOF"
+ The box is expected to have ssh on normal bootup, provide the user
+  (most likely root, since you need privileged operations)
+EOF
+    ;
+$config_help{"BUILD_DIR"} = << "EOF"
+ The directory that contains the Linux source code (full path).
+ You can use \${PWD} that will be the path where ktest.pl is run, or use
+ \${THIS_DIR} which is assigned \${PWD} but may be changed later.
+EOF
+    ;
+$config_help{"OUTPUT_DIR"} = << "EOF"
+ The directory that the objects will be built (full path).
+ (can not be same as BUILD_DIR)
+ You can use \${PWD} that will be the path where ktest.pl is run, or use
+ \${THIS_DIR} which is assigned \${PWD} but may be changed later.
+EOF
+    ;
+$config_help{"BUILD_TARGET"} = << "EOF"
+ The location of the compiled file to copy to the target.
+ (relative to OUTPUT_DIR)
+EOF
+    ;
+$config_help{"BUILD_OPTIONS"} = << "EOF"
+ Options to add to \"make\" when building.
+ i.e.  -j20
+EOF
+    ;
+$config_help{"TARGET_IMAGE"} = << "EOF"
+ The place to put your image on the test machine.
+EOF
+    ;
+$config_help{"POWER_CYCLE"} = << "EOF"
+ A script or command to reboot the box.
+
+ Here is a digital loggers power switch example
+ POWER_CYCLE = wget --no-proxy -O /dev/null -q  --auth-no-challenge 'http://admin:admin\@power/outlet?5=CCL'
+
+ Here is an example to reboot a virtual box on the current host
+ with the name "Guest".
+ POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+EOF
+    ;
+$config_help{"CONSOLE"} = << "EOF"
+ The script or command that reads the console
+
+  If you use ttywatch server, something like the following would work.
+CONSOLE = nc -d localhost 3001
+
+ For a virtual machine with guest name "Guest".
+CONSOLE =  virsh console Guest
+EOF
+    ;
+$config_help{"LOCALVERSION"} = << "EOF"
+ Required version ending to differentiate the test
+ from other linux builds on the system.
+EOF
+    ;
+$config_help{"REBOOT_TYPE"} = << "EOF"
+ Way to reboot the box to the test kernel.
+ Only valid options so far are "grub", "grub2", "syslinux", and "script".
+
+ If you specify grub, it will assume grub version 1
+ and will search in /boot/grub/menu.lst for the title \$GRUB_MENU
+ and select that target to reboot to the kernel. If this is not
+ your setup, then specify "script" and have a command or script
+ specified in REBOOT_SCRIPT to boot to the target.
+
+ The entry in /boot/grub/menu.lst must be entered in manually.
+ The test will not modify that file.
+
+ If you specify grub2, then you also need to specify both \$GRUB_MENU
+ and \$GRUB_FILE.
+
+ If you specify syslinux, then you may use SYSLINUX to define the syslinux
+ command (defaults to extlinux), and SYSLINUX_PATH to specify the path to
+ the syslinux install (defaults to /boot/extlinux). But you have to specify
+ SYSLINUX_LABEL to define the label to boot to for the test kernel.
+EOF
+    ;
+$config_help{"GRUB_MENU"} = << "EOF"
+ The grub title name for the test kernel to boot
+ (Only mandatory if REBOOT_TYPE = grub or grub2)
+
+ Note, ktest.pl will not update the grub menu.lst, you need to
+ manually add an option for the test. ktest.pl will search
+ the grub menu.lst for this option to find what kernel to
+ reboot into.
+
+ For example, if in the /boot/grub/menu.lst the test kernel title has:
+ title Test Kernel
+ kernel vmlinuz-test
+ GRUB_MENU = Test Kernel
+
+ For grub2, a search of \$GRUB_FILE is performed for the lines
+ that begin with "menuentry". It will not detect submenus. The
+ menu must be a non-nested menu. Add the quotes used in the menu
+ to guarantee your selection, as the first menuentry with the content
+ of \$GRUB_MENU that is found will be used.
+EOF
+    ;
+$config_help{"GRUB_FILE"} = << "EOF"
+ If grub2 is used, the full path for the grub.cfg file is placed
+ here. Use something like /boot/grub2/grub.cfg to search.
+EOF
+    ;
+$config_help{"SYSLINUX_LABEL"} = << "EOF"
+ If syslinux is used, the label that boots the target kernel must
+ be specified with SYSLINUX_LABEL.
+EOF
+    ;
+$config_help{"REBOOT_SCRIPT"} = << "EOF"
+ A script to reboot the target into the test kernel
+ (Only mandatory if REBOOT_TYPE = script)
+EOF
+    ;
+
+sub _logit {
+    if (defined($opt{"LOG_FILE"})) {
+	open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
+	print OUT @_;
+	close(OUT);
+    }
+}
+
+sub logit {
+    if (defined($opt{"LOG_FILE"})) {
+	_logit @_;
+    } else {
+	print @_;
+    }
+}
+
+sub doprint {
+    print @_;
+    _logit @_;
+}
+
+sub read_prompt {
+    my ($cancel, $prompt) = @_;
+
+    my $ans;
+
+    for (;;) {
+	if ($cancel) {
+	    print "$prompt [y/n/C] ";
+	} else {
+	    print "$prompt [Y/n] ";
+	}
+	$ans = <STDIN>;
+	chomp $ans;
+	if ($ans =~ /^\s*$/) {
+	    if ($cancel) {
+		$ans = "c";
+	    } else {
+		$ans = "y";
+	    }
+	}
+	last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
+	if ($cancel) {
+	    last if ($ans =~ /^c$/i);
+	    print "Please answer either 'y', 'n' or 'c'.\n";
+	} else {
+	    print "Please answer either 'y' or 'n'.\n";
+	}
+    }
+    if ($ans =~ /^c/i) {
+	exit;
+    }
+    if ($ans !~ /^y$/i) {
+	return 0;
+    }
+    return 1;
+}
+
+sub read_yn {
+    my ($prompt) = @_;
+
+    return read_prompt 0, $prompt;
+}
+
+sub read_ync {
+    my ($prompt) = @_;
+
+    return read_prompt 1, $prompt;
+}
+
+sub get_mandatory_config {
+    my ($config) = @_;
+    my $ans;
+
+    return if (defined($opt{$config}));
+
+    if (defined($config_help{$config})) {
+	print "\n";
+	print $config_help{$config};
+    }
+
+    for (;;) {
+	print "$config = ";
+	if (defined($default{$config}) && length($default{$config})) {
+	    print "\[$default{$config}\] ";
+	}
+	$ans = <STDIN>;
+	$ans =~ s/^\s*(.*\S)\s*$/$1/;
+	if ($ans =~ /^\s*$/) {
+	    if ($default{$config}) {
+		$ans = $default{$config};
+	    } else {
+		print "Your answer can not be blank\n";
+		next;
+	    }
+	}
+	$entered_configs{$config} = ${ans};
+	last;
+    }
+}
+
+sub show_time {
+    my ($time) = @_;
+
+    my $hours = 0;
+    my $minutes = 0;
+
+    if ($time > 3600) {
+	$hours = int($time / 3600);
+	$time -= $hours * 3600;
+    }
+    if ($time > 60) {
+	$minutes = int($time / 60);
+	$time -= $minutes * 60;
+    }
+
+    if ($hours > 0) {
+	doprint "$hours hour";
+	doprint "s" if ($hours > 1);
+	doprint " ";
+    }
+
+    if ($minutes > 0) {
+	doprint "$minutes minute";
+	doprint "s" if ($minutes > 1);
+	doprint " ";
+    }
+
+    doprint "$time second";
+    doprint "s" if ($time != 1);
+}
+
+sub print_times {
+    doprint "\n";
+    if ($build_time) {
+	doprint "Build time:   ";
+	show_time($build_time);
+	doprint "\n";
+    }
+    if ($install_time) {
+	doprint "Install time: ";
+	show_time($install_time);
+	doprint "\n";
+    }
+    if ($reboot_time) {
+	doprint "Reboot time:  ";
+	show_time($reboot_time);
+	doprint "\n";
+    }
+    if ($test_time) {
+	doprint "Test time:    ";
+	show_time($test_time);
+	doprint "\n";
+    }
+    # reset for iterations like bisect
+    $build_time = 0;
+    $install_time = 0;
+    $reboot_time = 0;
+    $test_time = 0;
+}
+
+sub get_mandatory_configs {
+    get_mandatory_config("MACHINE");
+    get_mandatory_config("BUILD_DIR");
+    get_mandatory_config("OUTPUT_DIR");
+
+    if ($newconfig) {
+	get_mandatory_config("BUILD_OPTIONS");
+    }
+
+    # options required for other than just building a kernel
+    if (!$buildonly) {
+	get_mandatory_config("POWER_CYCLE");
+	get_mandatory_config("CONSOLE");
+    }
+
+    # options required for install and more
+    if ($buildonly != 1) {
+	get_mandatory_config("SSH_USER");
+	get_mandatory_config("BUILD_TARGET");
+	get_mandatory_config("TARGET_IMAGE");
+    }
+
+    get_mandatory_config("LOCALVERSION");
+
+    return if ($buildonly);
+
+    my $rtype = $opt{"REBOOT_TYPE"};
+
+    if (!defined($rtype)) {
+	if (!defined($opt{"GRUB_MENU"})) {
+	    get_mandatory_config("REBOOT_TYPE");
+	    $rtype = $entered_configs{"REBOOT_TYPE"};
+	} else {
+	    $rtype = "grub";
+	}
+    }
+
+    if ($rtype eq "grub") {
+	get_mandatory_config("GRUB_MENU");
+    }
+
+    if ($rtype eq "grub2") {
+	get_mandatory_config("GRUB_MENU");
+	get_mandatory_config("GRUB_FILE");
+    }
+
+    if ($rtype eq "syslinux") {
+	get_mandatory_config("SYSLINUX_LABEL");
+    }
+}
+
+sub process_variables {
+    my ($value, $remove_undef) = @_;
+    my $retval = "";
+
+    # We want to check for '\', and it is just easier
+    # to check the previous characet of '$' and not need
+    # to worry if '$' is the first character. By adding
+    # a space to $value, we can just check [^\\]\$ and
+    # it will still work.
+    $value = " $value";
+
+    while ($value =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+	my $begin = $1;
+	my $var = $2;
+	my $end = $3;
+	# append beginning of value to retval
+	$retval = "$retval$begin";
+	if (defined($variable{$var})) {
+	    $retval = "$retval$variable{$var}";
+	} elsif (defined($remove_undef) && $remove_undef) {
+	    # for if statements, any variable that is not defined,
+	    # we simple convert to 0
+	    $retval = "${retval}0";
+	} else {
+	    # put back the origin piece.
+	    $retval = "$retval\$\{$var\}";
+	    # This could be an option that is used later, save
+	    # it so we don't warn if this option is not one of
+	    # ktests options.
+	    $used_options{$var} = 1;
+	}
+	$value = $end;
+    }
+    $retval = "$retval$value";
+
+    # remove the space added in the beginning
+    $retval =~ s/ //;
+
+    return "$retval"
+}
+
+sub set_value {
+    my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
+
+    my $prvalue = process_variables($rvalue);
+
+    if ($buildonly && $lvalue =~ /^TEST_TYPE(\[.*\])?$/ && $prvalue ne "build") {
+	# Note if a test is something other than build, then we
+	# will need other manditory options.
+	if ($prvalue ne "install") {
+	    # for bisect, we need to check BISECT_TYPE
+	    if ($prvalue ne "bisect") {
+		$buildonly = 0;
+	    }
+	} else {
+	    # install still limits some manditory options.
+	    $buildonly = 2;
+	}
+    }
+
+    if ($buildonly && $lvalue =~ /^BISECT_TYPE(\[.*\])?$/ && $prvalue ne "build") {
+	if ($prvalue ne "install") {
+	    $buildonly = 0;
+	} else {
+	    # install still limits some manditory options.
+	    $buildonly = 2;
+	}
+    }
+
+    if (defined($opt{$lvalue})) {
+	if (!$override || defined(${$overrides}{$lvalue})) {
+	    my $extra = "";
+	    if ($override) {
+		$extra = "In the same override section!\n";
+	    }
+	    die "$name: $.: Option $lvalue defined more than once!\n$extra";
+	}
+	${$overrides}{$lvalue} = $prvalue;
+    }
+
+    $opt{$lvalue} = $prvalue;
+}
+
+sub set_eval {
+    my ($lvalue, $rvalue, $name) = @_;
+
+    my $prvalue = process_variables($rvalue);
+    my $arr;
+
+    if (defined($evals{$lvalue})) {
+	$arr = $evals{$lvalue};
+    } else {
+	$arr = [];
+	$evals{$lvalue} = $arr;
+    }
+
+    push @{$arr}, $rvalue;
+}
+
+sub set_variable {
+    my ($lvalue, $rvalue) = @_;
+
+    if ($rvalue =~ /^\s*$/) {
+	delete $variable{$lvalue};
+    } else {
+	$rvalue = process_variables($rvalue);
+	$variable{$lvalue} = $rvalue;
+    }
+}
+
+sub process_compare {
+    my ($lval, $cmp, $rval) = @_;
+
+    # remove whitespace
+
+    $lval =~ s/^\s*//;
+    $lval =~ s/\s*$//;
+
+    $rval =~ s/^\s*//;
+    $rval =~ s/\s*$//;
+
+    if ($cmp eq "==") {
+	return $lval eq $rval;
+    } elsif ($cmp eq "!=") {
+	return $lval ne $rval;
+    } elsif ($cmp eq "=~") {
+	return $lval =~ m/$rval/;
+    } elsif ($cmp eq "!~") {
+	return $lval !~ m/$rval/;
+    }
+
+    my $statement = "$lval $cmp $rval";
+    my $ret = eval $statement;
+
+    # $@ stores error of eval
+    if ($@) {
+	return -1;
+    }
+
+    return $ret;
+}
+
+sub value_defined {
+    my ($val) = @_;
+
+    return defined($variable{$2}) ||
+	defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+    my ($name, $val) = @_;
+
+    my $c = $d++;
+
+    while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+	my $express = $1;
+
+	if (process_expression($name, $express)) {
+	    $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+	} else {
+	    $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+	}
+    }
+
+    $d--;
+    my $OR = "\\|\\|";
+    my $AND = "\\&\\&";
+
+    while ($val =~ s/^(.*?)($OR|$AND)//) {
+	my $express = $1;
+	my $op = $2;
+
+	if (process_expression($name, $express)) {
+	    if ($op eq "||") {
+		return 1;
+	    }
+	} else {
+	    if ($op eq "&&") {
+		return 0;
+	    }
+	}
+    }
+
+    if ($val =~ /(.*)(==|\!=|>=|<=|>|<|=~|\!~)(.*)/) {
+	my $ret = process_compare($1, $2, $3);
+	if ($ret < 0) {
+	    die "$name: $.: Unable to process comparison\n";
+	}
+	return $ret;
+    }
+
+    if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+	if (defined $1) {
+	    return !value_defined($2);
+	} else {
+	    return value_defined($2);
+	}
+    }
+
+    if ($val =~ /^\s*0\s*$/) {
+	return 0;
+    } elsif ($val =~ /^\s*\d+\s*$/) {
+	return 1;
+    }
+
+    die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+    my ($name, $value) = @_;
+
+    # Convert variables and replace undefined ones with 0
+    my $val = process_variables($value, 1);
+    my $ret = process_expression $name, $val;
+
+    return $ret;
+}
+
+sub __read_config {
+    my ($config, $current_test_num) = @_;
+
+    my $in;
+    open($in, $config) || die "can't read file $config";
+
+    my $name = $config;
+    $name =~ s,.*/(.*),$1,;
+
+    my $test_num = $$current_test_num;
+    my $default = 1;
+    my $repeat = 1;
+    my $num_tests_set = 0;
+    my $skip = 0;
+    my $rest;
+    my $line;
+    my $test_case = 0;
+    my $if = 0;
+    my $if_set = 0;
+    my $override = 0;
+
+    my %overrides;
+
+    while (<$in>) {
+
+	# ignore blank lines and comments
+	next if (/^\s*$/ || /\s*\#/);
+
+	if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
+
+	    my $type = $1;
+	    $rest = $2;
+	    $line = $2;
+
+	    my $old_test_num;
+	    my $old_repeat;
+	    $override = 0;
+
+	    if ($type eq "TEST_START") {
+
+		if ($num_tests_set) {
+		    die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+		}
+
+		$old_test_num = $test_num;
+		$old_repeat = $repeat;
+
+		$test_num += $repeat;
+		$default = 0;
+		$repeat = 1;
+	    } else {
+		$default = 1;
+	    }
+
+	    # If SKIP is anywhere in the line, the command will be skipped
+	    if ($rest =~ s/\s+SKIP\b//) {
+		$skip = 1;
+	    } else {
+		$test_case = 1;
+		$skip = 0;
+	    }
+
+	    if ($rest =~ s/\sELSE\b//) {
+		if (!$if) {
+		    die "$name: $.: ELSE found with out matching IF section\n$_";
+		}
+		$if = 0;
+
+		if ($if_set) {
+		    $skip = 1;
+		} else {
+		    $skip = 0;
+		}
+	    }
+
+	    if ($rest =~ s/\sIF\s+(.*)//) {
+		if (process_if($name, $1)) {
+		    $if_set = 1;
+		} else {
+		    $skip = 1;
+		}
+		$if = 1;
+	    } else {
+		$if = 0;
+		$if_set = 0;
+	    }
+
+	    if (!$skip) {
+		if ($type eq "TEST_START") {
+		    if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+			$repeat = $1;
+			$repeat_tests{"$test_num"} = $repeat;
+		    }
+		} elsif ($rest =~ s/\sOVERRIDE\b//) {
+		    # DEFAULT only
+		    $override = 1;
+		    # Clear previous overrides
+		    %overrides = ();
+		}
+	    }
+
+	    if (!$skip && $rest !~ /^\s*$/) {
+		die "$name: $.: Gargbage found after $type\n$_";
+	    }
+
+	    if ($skip && $type eq "TEST_START") {
+		$test_num = $old_test_num;
+		$repeat = $old_repeat;
+	    }
+
+	} elsif (/^\s*ELSE\b(.*)$/) {
+	    if (!$if) {
+		die "$name: $.: ELSE found with out matching IF section\n$_";
+	    }
+	    $rest = $1;
+	    if ($if_set) {
+		$skip = 1;
+		$rest = "";
+	    } else {
+		$skip = 0;
+
+		if ($rest =~ /\sIF\s+(.*)/) {
+		    # May be a ELSE IF section.
+		    if (process_if($name, $1)) {
+			$if_set = 1;
+		    } else {
+			$skip = 1;
+		    }
+		    $rest = "";
+		} else {
+		    $if = 0;
+		}
+	    }
+
+	    if ($rest !~ /^\s*$/) {
+		die "$name: $.: Gargbage found after DEFAULTS\n$_";
+	    }
+
+	} elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+	    next if ($skip);
+
+	    if (!$default) {
+		die "$name: $.: INCLUDE can only be done in default sections\n$_";
+	    }
+
+	    my $file = process_variables($1);
+
+	    if ($file !~ m,^/,) {
+		# check the path of the config file first
+		if ($config =~ m,(.*)/,) {
+		    if (-f "$1/$file") {
+			$file = "$1/$file";
+		    }
+		}
+	    }
+		
+	    if ( ! -r $file ) {
+		die "$name: $.: Can't read file $file\n$_";
+	    }
+
+	    if (__read_config($file, \$test_num)) {
+		$test_case = 1;
+	    }
+
+	} elsif (/^\s*([A-Z_\[\]\d]+)\s*=~\s*(.*?)\s*$/) {
+
+	    next if ($skip);
+
+	    my $lvalue = $1;
+	    my $rvalue = $2;
+
+	    if ($default || $lvalue =~ /\[\d+\]$/) {
+		set_eval($lvalue, $rvalue, $name);
+	    } else {
+		my $val = "$lvalue\[$test_num\]";
+		set_eval($val, $rvalue, $name);
+	    }
+
+	} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
+
+	    next if ($skip);
+
+	    my $lvalue = $1;
+	    my $rvalue = $2;
+
+	    if (!$default &&
+		($lvalue eq "NUM_TESTS" ||
+		 $lvalue eq "LOG_FILE" ||
+		 $lvalue eq "CLEAR_LOG")) {
+		die "$name: $.: $lvalue must be set in DEFAULTS section\n";
+	    }
+
+	    if ($lvalue eq "NUM_TESTS") {
+		if ($test_num) {
+		    die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+		}
+		if (!$default) {
+		    die "$name: $.: NUM_TESTS must be set in default section\n";
+		}
+		$num_tests_set = 1;
+	    }
+
+	    if ($default || $lvalue =~ /\[\d+\]$/) {
+		set_value($lvalue, $rvalue, $override, \%overrides, $name);
+	    } else {
+		my $val = "$lvalue\[$test_num\]";
+		set_value($val, $rvalue, $override, \%overrides, $name);
+
+		if ($repeat > 1) {
+		    $repeats{$val} = $repeat;
+		}
+	    }
+	} elsif (/^\s*([A-Z_\[\]\d]+)\s*:=\s*(.*?)\s*$/) {
+	    next if ($skip);
+
+	    my $lvalue = $1;
+	    my $rvalue = $2;
+
+	    # process config variables.
+	    # Config variables are only active while reading the
+	    # config and can be defined anywhere. They also ignore
+	    # TEST_START and DEFAULTS, but are skipped if they are in
+	    # on of these sections that have SKIP defined.
+	    # The save variable can be
+	    # defined multiple times and the new one simply overrides
+	    # the prevous one.
+	    set_variable($lvalue, $rvalue);
+
+	} else {
+	    die "$name: $.: Garbage found in config\n$_";
+	}
+    }
+
+    if ($test_num) {
+	$test_num += $repeat - 1;
+	$opt{"NUM_TESTS"} = $test_num;
+    }
+
+    close($in);
+
+    $$current_test_num = $test_num;
+
+    return $test_case;
+}
+
+sub get_test_case {
+	print "What test case would you like to run?\n";
+	print " (build, install or boot)\n";
+	print " Other tests are available but require editing the config file\n";
+	my $ans = <STDIN>;
+	chomp $ans;
+	$default{"TEST_TYPE"} = $ans;
+}
+
+sub read_config {
+    my ($config) = @_;
+
+    my $test_case;
+    my $test_num = 0;
+
+    $test_case = __read_config $config, \$test_num;
+
+    # make sure we have all mandatory configs
+    get_mandatory_configs;
+
+    # was a test specified?
+    if (!$test_case) {
+	print "No test case specified.\n";
+	get_test_case;
+    }
+
+    # set any defaults
+
+    foreach my $default (keys %default) {
+	if (!defined($opt{$default})) {
+	    $opt{$default} = $default{$default};
+	}
+    }
+
+    if ($opt{"IGNORE_UNUSED"} == 1) {
+	return;
+    }
+
+    my %not_used;
+
+    # check if there are any stragglers (typos?)
+    foreach my $option (keys %opt) {
+	my $op = $option;
+	# remove per test labels.
+	$op =~ s/\[.*\]//;
+	if (!exists($option_map{$op}) &&
+	    !exists($default{$op}) &&
+	    !exists($used_options{$op})) {
+	    $not_used{$op} = 1;
+	}
+    }
+
+    if (%not_used) {
+	my $s = "s are";
+	$s = " is" if (keys %not_used == 1);
+	print "The following option$s not used; could be a typo:\n";
+	foreach my $option (keys %not_used) {
+	    print "$option\n";
+	}
+	print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n";
+	if (!read_yn "Do you want to continue?") {
+	    exit -1;
+	}
+    }
+}
+
+sub __eval_option {
+    my ($name, $option, $i) = @_;
+
+    # Add space to evaluate the character before $
+    $option = " $option";
+    my $retval = "";
+    my $repeated = 0;
+    my $parent = 0;
+
+    foreach my $test (keys %repeat_tests) {
+	if ($i >= $test &&
+	    $i < $test + $repeat_tests{$test}) {
+
+	    $repeated = 1;
+	    $parent = $test;
+	    last;
+	}
+    }
+
+    while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+	my $start = $1;
+	my $var = $2;
+	my $end = $3;
+
+	# Append beginning of line
+	$retval = "$retval$start";
+
+	# If the iteration option OPT[$i] exists, then use that.
+	# otherwise see if the default OPT (without [$i]) exists.
+
+	my $o = "$var\[$i\]";
+	my $parento = "$var\[$parent\]";
+
+	# If a variable contains itself, use the default var
+	if (($var eq $name) && defined($opt{$var})) {
+	    $o = $opt{$var};
+	    $retval = "$retval$o";
+	} elsif (defined($opt{$o})) {
+	    $o = $opt{$o};
+	    $retval = "$retval$o";
+	} elsif ($repeated && defined($opt{$parento})) {
+	    $o = $opt{$parento};
+	    $retval = "$retval$o";
+	} elsif (defined($opt{$var})) {
+	    $o = $opt{$var};
+	    $retval = "$retval$o";
+	} elsif ($var eq "KERNEL_VERSION" && defined($make)) {
+	    # special option KERNEL_VERSION uses kernel version
+	    get_version();
+	    $retval = "$retval$version";
+	} else {
+	    $retval = "$retval\$\{$var\}";
+	}
+
+	$option = $end;
+    }
+
+    $retval = "$retval$option";
+
+    $retval =~ s/^ //;
+
+    return $retval;
+}
+
+sub process_evals {
+    my ($name, $option, $i) = @_;
+
+    my $option_name = "$name\[$i\]";
+    my $ev;
+
+    my $old_option = $option;
+
+    if (defined($evals{$option_name})) {
+	$ev = $evals{$option_name};
+    } elsif (defined($evals{$name})) {
+	$ev = $evals{$name};
+    } else {
+	return $option;
+    }
+
+    for my $e (@{$ev}) {
+	eval "\$option =~ $e";
+    }
+
+    if ($option ne $old_option) {
+	doprint("$name changed from '$old_option' to '$option'\n");
+    }
+
+    return $option;
+}
+
+sub eval_option {
+    my ($name, $option, $i) = @_;
+
+    my $prev = "";
+
+    # Since an option can evaluate to another option,
+    # keep iterating until we do not evaluate any more
+    # options.
+    my $r = 0;
+    while ($prev ne $option) {
+	# Check for recursive evaluations.
+	# 100 deep should be more than enough.
+	if ($r++ > 100) {
+	    die "Over 100 evaluations accurred with $option\n" .
+		"Check for recursive variables\n";
+	}
+	$prev = $option;
+	$option = __eval_option($name, $option, $i);
+    }
+
+    $option = process_evals($name, $option, $i);
+
+    return $option;
+}
+
+sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
+
+sub reboot {
+    my ($time) = @_;
+
+    # Make sure everything has been written to disk
+    run_ssh("sync");
+
+    if (defined($time)) {
+	start_monitor;
+	# flush out current monitor
+	# May contain the reboot success line
+	wait_for_monitor 1;
+    }
+
+    # try to reboot normally
+    if (run_command $reboot) {
+	if (defined($powercycle_after_reboot)) {
+	    sleep $powercycle_after_reboot;
+	    run_command "$power_cycle";
+	}
+    } else {
+	# nope? power cycle it.
+	run_command "$power_cycle";
+    }
+
+    if (defined($time)) {
+
+	# We only want to get to the new kernel, don't fail
+	# if we stumble over a call trace.
+	my $save_ignore_errors = $ignore_errors;
+	$ignore_errors = 1;
+
+	# Look for the good kernel to boot
+	if (wait_for_monitor($time, "Linux version")) {
+	    # reboot got stuck?
+	    doprint "Reboot did not finish. Forcing power cycle\n";
+	    run_command "$power_cycle";
+	}
+
+	$ignore_errors = $save_ignore_errors;
+
+	# Still need to wait for the reboot to finish
+	wait_for_monitor($time, $reboot_success_line);
+
+	end_monitor;
+    }
+}
+
+sub reboot_to_good {
+    my ($time) = @_;
+
+    if (defined($switch_to_good)) {
+	run_command $switch_to_good;
+    }
+
+    reboot $time;
+}
+
+sub do_not_reboot {
+    my $i = $iteration;
+
+    return $test_type eq "build" || $no_reboot ||
+	($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
+	($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
+}
+
+sub dodie {
+    doprint "CRITICAL FAILURE... ", @_, "\n";
+
+    my $i = $iteration;
+
+    if ($reboot_on_error && !do_not_reboot) {
+
+	doprint "REBOOTING\n";
+	reboot_to_good;
+
+    } elsif ($poweroff_on_error && defined($power_off)) {
+	doprint "POWERING OFF\n";
+	`$power_off`;
+    }
+
+    if (defined($opt{"LOG_FILE"})) {
+	print " See $opt{LOG_FILE} for more info.\n";
+    }
+
+    if ($monitor_cnt) {
+	    # restore terminal settings
+	    system("stty $stty_orig");
+    }
+
+    die @_, "\n";
+}
+
+sub create_pty {
+    my ($ptm, $pts) = @_;
+    my $tmp;
+    my $TIOCSPTLCK = 0x40045431;
+    my $TIOCGPTN = 0x80045430;
+
+    sysopen($ptm, "/dev/ptmx", O_RDWR | O_NONBLOCK) or
+	dodie "Cant open /dev/ptmx";
+
+    # unlockpt()
+    $tmp = pack("i", 0);
+    ioctl($ptm, $TIOCSPTLCK, $tmp) or
+	dodie "ioctl TIOCSPTLCK for /dev/ptmx failed";
+
+    # ptsname()
+    ioctl($ptm, $TIOCGPTN, $tmp) or
+	dodie "ioctl TIOCGPTN for /dev/ptmx failed";
+    $tmp = unpack("i", $tmp);
+
+    sysopen($pts, "/dev/pts/$tmp", O_RDWR | O_NONBLOCK) or
+	dodie "Can't open /dev/pts/$tmp";
+}
+
+sub exec_console {
+    my ($ptm, $pts) = @_;
+
+    close($ptm);
+
+    close(\*STDIN);
+    close(\*STDOUT);
+    close(\*STDERR);
+
+    open(\*STDIN, '<&', $pts);
+    open(\*STDOUT, '>&', $pts);
+    open(\*STDERR, '>&', $pts);
+
+    close($pts);
+
+    exec $console or
+	die "Can't open console $console";
+}
+
+sub open_console {
+    my ($ptm) = @_;
+    my $pts = \*PTSFD;
+    my $pid;
+
+    # save terminal settings
+    $stty_orig = `stty -g`;
+
+    # place terminal in cbreak mode so that stdin can be read one character at
+    # a time without having to wait for a newline
+    system("stty -icanon -echo -icrnl");
+
+    create_pty($ptm, $pts);
+
+    $pid = fork;
+
+    if (!$pid) {
+	# child
+	exec_console($ptm, $pts)
+    }
+
+    # parent
+    close($pts);
+
+    return $pid;
+
+    open(PTSFD, "Stop perl from warning about single use of PTSFD");
+}
+
+sub close_console {
+    my ($fp, $pid) = @_;
+
+    doprint "kill child process $pid\n";
+    kill $close_console_signal, $pid;
+
+    print "closing!\n";
+    close($fp);
+
+    # restore terminal settings
+    system("stty $stty_orig");
+}
+
+sub start_monitor {
+    if ($monitor_cnt++) {
+	return;
+    }
+    $monitor_fp = \*MONFD;
+    $monitor_pid = open_console $monitor_fp;
+
+    return;
+
+    open(MONFD, "Stop perl from warning about single use of MONFD");
+}
+
+sub end_monitor {
+    return if (!defined $console);
+    if (--$monitor_cnt) {
+	return;
+    }
+    close_console($monitor_fp, $monitor_pid);
+}
+
+sub wait_for_monitor {
+    my ($time, $stop) = @_;
+    my $full_line = "";
+    my $line;
+    my $booted = 0;
+    my $start_time = time;
+    my $skip_call_trace = 0;
+    my $bug = 0;
+    my $bug_ignored = 0;
+    my $now;
+
+    doprint "** Wait for monitor to settle down **\n";
+
+    # read the monitor and wait for the system to calm down
+    while (!$booted) {
+	$line = wait_for_input($monitor_fp, $time);
+	last if (!defined($line));
+	print "$line";
+	$full_line .= $line;
+
+	if (defined($stop) && $full_line =~ /$stop/) {
+	    doprint "wait for monitor detected $stop\n";
+	    $booted = 1;
+	}
+
+	if ($full_line =~ /\[ backtrace testing \]/) {
+	    $skip_call_trace = 1;
+	}
+
+	if ($full_line =~ /call trace:/i) {
+	    if (!$bug && !$skip_call_trace) {
+		if ($ignore_errors) {
+		    $bug_ignored = 1;
+		} else {
+		    $bug = 1;
+		}
+	    }
+	}
+
+	if ($full_line =~ /\[ end of backtrace testing \]/) {
+	    $skip_call_trace = 0;
+	}
+
+	if ($full_line =~ /Kernel panic -/) {
+	    $bug = 1;
+	}
+
+	if ($line =~ /\n/) {
+	    $full_line = "";
+	}
+	$now = time;
+	if ($now - $start_time >= $max_monitor_wait) {
+	    doprint "Exiting monitor flush due to hitting MAX_MONITOR_WAIT\n";
+	    return 1;
+	}
+    }
+    print "** Monitor flushed **\n";
+
+    # if stop is defined but wasn't hit, return error
+    # used by reboot (which wants to see a reboot)
+    if (defined($stop) && !$booted) {
+	$bug = 1;
+    }
+    return $bug;
+}
+
+sub save_logs {
+	my ($result, $basedir) = @_;
+	my @t = localtime;
+	my $date = sprintf "%04d%02d%02d%02d%02d%02d",
+		1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
+
+	my $type = $build_type;
+	if ($type =~ /useconfig/) {
+	    $type = "useconfig";
+	}
+
+	my $dir = "$machine-$test_type-$type-$result-$date";
+
+	$dir = "$basedir/$dir";
+
+	if (!-d $dir) {
+	    mkpath($dir) or
+		die "can't create $dir";
+	}
+
+	my %files = (
+		"config" => $output_config,
+		"buildlog" => $buildlog,
+		"dmesg" => $dmesg,
+		"testlog" => $testlog,
+	);
+
+	while (my ($name, $source) = each(%files)) {
+		if (-f "$source") {
+			cp "$source", "$dir/$name" or
+				die "failed to copy $source";
+		}
+	}
+
+	doprint "*** Saved info to $dir ***\n";
+}
+
+sub fail {
+
+	if (defined($post_test)) {
+		run_command $post_test;
+	}
+
+	if ($die_on_failure) {
+		dodie @_;
+	}
+
+	doprint "FAILED\n";
+
+	my $i = $iteration;
+
+	# no need to reboot for just building.
+	if (!do_not_reboot) {
+	    doprint "REBOOTING\n";
+	    reboot_to_good $sleep_time;
+	}
+
+	my $name = "";
+
+	if (defined($test_name)) {
+	    $name = " ($test_name)";
+	}
+
+	print_times;
+
+	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+	doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
+	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+
+	if (defined($store_failures)) {
+	    save_logs "fail", $store_failures;
+        }
+
+	return 1;
+}
+
+sub run_command {
+    my ($command, $redirect) = @_;
+    my $start_time;
+    my $end_time;
+    my $dolog = 0;
+    my $dord = 0;
+    my $pid;
+
+    $start_time = time;
+
+    $command =~ s/\$SSH_USER/$ssh_user/g;
+    $command =~ s/\$MACHINE/$machine/g;
+
+    doprint("$command ... ");
+
+    $pid = open(CMD, "$command 2>&1 |") or
+	(fail "unable to exec $command" and return 0);
+
+    if (defined($opt{"LOG_FILE"})) {
+	open(LOG, ">>$opt{LOG_FILE}") or
+	    dodie "failed to write to log";
+	$dolog = 1;
+    }
+
+    if (defined($redirect)) {
+	open (RD, ">$redirect") or
+	    dodie "failed to write to redirect $redirect";
+	$dord = 1;
+    }
+
+    while (<CMD>) {
+	print LOG if ($dolog);
+	print RD  if ($dord);
+    }
+
+    waitpid($pid, 0);
+    my $failed = $?;
+
+    close(CMD);
+    close(LOG) if ($dolog);
+    close(RD)  if ($dord);
+
+    $end_time = time;
+    my $delta = $end_time - $start_time;
+
+    if ($delta == 1) {
+	doprint "[1 second] ";
+    } else {
+	doprint "[$delta seconds] ";
+    }
+
+    if ($failed) {
+	doprint "FAILED!\n";
+    } else {
+	doprint "SUCCESS\n";
+    }
+
+    return !$failed;
+}
+
+sub run_ssh {
+    my ($cmd) = @_;
+    my $cp_exec = $ssh_exec;
+
+    $cp_exec =~ s/\$SSH_COMMAND/$cmd/g;
+    return run_command "$cp_exec";
+}
+
+sub run_scp {
+    my ($src, $dst, $cp_scp) = @_;
+
+    $cp_scp =~ s/\$SRC_FILE/$src/g;
+    $cp_scp =~ s/\$DST_FILE/$dst/g;
+
+    return run_command "$cp_scp";
+}
+
+sub run_scp_install {
+    my ($src, $dst) = @_;
+
+    my $cp_scp = $scp_to_target_install;
+
+    return run_scp($src, $dst, $cp_scp);
+}
+
+sub run_scp_mod {
+    my ($src, $dst) = @_;
+
+    my $cp_scp = $scp_to_target;
+
+    return run_scp($src, $dst, $cp_scp);
+}
+
+sub get_grub2_index {
+
+    return if (defined($grub_number) && defined($last_grub_menu) &&
+	       $last_grub_menu eq $grub_menu && defined($last_machine) &&
+	       $last_machine eq $machine);
+
+    doprint "Find grub2 menu ... ";
+    $grub_number = -1;
+
+    my $ssh_grub = $ssh_exec;
+    $ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g;
+
+    open(IN, "$ssh_grub |")
+	or die "unable to get $grub_file";
+
+    my $found = 0;
+
+    while (<IN>) {
+	if (/^menuentry.*$grub_menu/) {
+	    $grub_number++;
+	    $found = 1;
+	    last;
+	} elsif (/^menuentry\s/) {
+	    $grub_number++;
+	}
+    }
+    close(IN);
+
+    die "Could not find '$grub_menu' in $grub_file on $machine"
+	if (!$found);
+    doprint "$grub_number\n";
+    $last_grub_menu = $grub_menu;
+    $last_machine = $machine;
+}
+
+sub get_grub_index {
+
+    if ($reboot_type eq "grub2") {
+	get_grub2_index;
+	return;
+    }
+
+    if ($reboot_type ne "grub") {
+	return;
+    }
+    return if (defined($grub_number) && defined($last_grub_menu) &&
+	       $last_grub_menu eq $grub_menu && defined($last_machine) &&
+	       $last_machine eq $machine);
+
+    doprint "Find grub menu ... ";
+    $grub_number = -1;
+
+    my $ssh_grub = $ssh_exec;
+    $ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g;
+
+    open(IN, "$ssh_grub |")
+	or die "unable to get menu.lst";
+
+    my $found = 0;
+
+    while (<IN>) {
+	if (/^\s*title\s+$grub_menu\s*$/) {
+	    $grub_number++;
+	    $found = 1;
+	    last;
+	} elsif (/^\s*title\s/) {
+	    $grub_number++;
+	}
+    }
+    close(IN);
+
+    die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
+	if (!$found);
+    doprint "$grub_number\n";
+    $last_grub_menu = $grub_menu;
+    $last_machine = $machine;
+}
+
+sub wait_for_input
+{
+    my ($fp, $time) = @_;
+    my $rin;
+    my $rout;
+    my $nr;
+    my $buf;
+    my $line;
+    my $ch;
+
+    if (!defined($time)) {
+	$time = $timeout;
+    }
+
+    $rin = '';
+    vec($rin, fileno($fp), 1) = 1;
+    vec($rin, fileno(\*STDIN), 1) = 1;
+
+    while (1) {
+	$nr = select($rout=$rin, undef, undef, $time);
+
+	if ($nr <= 0) {
+	    return undef;
+	}
+
+	# copy data from stdin to the console
+	if (vec($rout, fileno(\*STDIN), 1) == 1) {
+	    sysread(\*STDIN, $buf, 1000);
+	    syswrite($fp, $buf, 1000);
+	    next;
+	}
+
+	$line = "";
+
+	# try to read one char at a time
+	while (sysread $fp, $ch, 1) {
+	    $line .= $ch;
+	    last if ($ch eq "\n");
+	}
+
+	if (!length($line)) {
+	    return undef;
+	}
+
+	return $line;
+    }
+}
+
+sub reboot_to {
+    if (defined($switch_to_test)) {
+	run_command $switch_to_test;
+    }
+
+    if ($reboot_type eq "grub") {
+	run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+    } elsif ($reboot_type eq "grub2") {
+	run_ssh "$grub_reboot $grub_number";
+    } elsif ($reboot_type eq "syslinux") {
+	run_ssh "$syslinux --once \\\"$syslinux_label\\\" $syslinux_path";
+    } elsif (defined $reboot_script) {
+	run_command "$reboot_script";
+    }
+    reboot;
+}
+
+sub get_sha1 {
+    my ($commit) = @_;
+
+    doprint "git rev-list --max-count=1 $commit ... ";
+    my $sha1 = `git rev-list --max-count=1 $commit`;
+    my $ret = $?;
+
+    logit $sha1;
+
+    if ($ret) {
+	doprint "FAILED\n";
+	dodie "Failed to get git $commit";
+    }
+
+    print "SUCCESS\n";
+
+    chomp $sha1;
+
+    return $sha1;
+}
+
+sub monitor {
+    my $booted = 0;
+    my $bug = 0;
+    my $bug_ignored = 0;
+    my $skip_call_trace = 0;
+    my $loops;
+
+    my $start_time = time;
+
+    wait_for_monitor 5;
+
+    my $line;
+    my $full_line = "";
+
+    open(DMESG, "> $dmesg") or
+	die "unable to write to $dmesg";
+
+    reboot_to;
+
+    my $success_start;
+    my $failure_start;
+    my $monitor_start = time;
+    my $done = 0;
+    my $version_found = 0;
+
+    while (!$done) {
+
+	if ($bug && defined($stop_after_failure) &&
+	    $stop_after_failure >= 0) {
+	    my $time = $stop_after_failure - (time - $failure_start);
+	    $line = wait_for_input($monitor_fp, $time);
+	    if (!defined($line)) {
+		doprint "bug timed out after $booted_timeout seconds\n";
+		doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+		last;
+	    }
+	} elsif ($booted) {
+	    $line = wait_for_input($monitor_fp, $booted_timeout);
+	    if (!defined($line)) {
+		my $s = $booted_timeout == 1 ? "" : "s";
+		doprint "Successful boot found: break after $booted_timeout second$s\n";
+		last;
+	    }
+	} else {
+	    $line = wait_for_input($monitor_fp);
+	    if (!defined($line)) {
+		my $s = $timeout == 1 ? "" : "s";
+		doprint "Timed out after $timeout second$s\n";
+		last;
+	    }
+	}
+
+	doprint $line;
+	print DMESG $line;
+
+	# we are not guaranteed to get a full line
+	$full_line .= $line;
+
+	if ($full_line =~ /$success_line/) {
+	    $booted = 1;
+	    $success_start = time;
+	}
+
+	if ($booted && defined($stop_after_success) &&
+	    $stop_after_success >= 0) {
+	    my $now = time;
+	    if ($now - $success_start >= $stop_after_success) {
+		doprint "Test forced to stop after $stop_after_success seconds after success\n";
+		last;
+	    }
+	}
+
+	if ($full_line =~ /\[ backtrace testing \]/) {
+	    $skip_call_trace = 1;
+	}
+
+	if ($full_line =~ /call trace:/i) {
+	    if (!$bug && !$skip_call_trace) {
+		if ($ignore_errors) {
+		    $bug_ignored = 1;
+		} else {
+		    $bug = 1;
+		    $failure_start = time;
+		}
+	    }
+	}
+
+	if ($bug && defined($stop_after_failure) &&
+	    $stop_after_failure >= 0) {
+	    my $now = time;
+	    if ($now - $failure_start >= $stop_after_failure) {
+		doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+		last;
+	    }
+	}
+
+	if ($full_line =~ /\[ end of backtrace testing \]/) {
+	    $skip_call_trace = 0;
+	}
+
+	if ($full_line =~ /Kernel panic -/) {
+	    $failure_start = time;
+	    $bug = 1;
+	}
+
+	# Detect triple faults by testing the banner
+	if ($full_line =~ /\bLinux version (\S+).*\n/) {
+	    if ($1 eq $version) {
+		$version_found = 1;
+	    } elsif ($version_found && $detect_triplefault) {
+		# We already booted into the kernel we are testing,
+		# but now we booted into another kernel?
+		# Consider this a triple fault.
+		doprint "Already booted in Linux kernel $version, but now\n";
+		doprint "we booted into Linux kernel $1.\n";
+		doprint "Assuming that this is a triple fault.\n";
+		doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n";
+		last;
+	    }
+	}
+
+	if ($line =~ /\n/) {
+	    $full_line = "";
+	}
+
+	if ($stop_test_after > 0 && !$booted && !$bug) {
+	    if (time - $monitor_start > $stop_test_after) {
+		doprint "STOP_TEST_AFTER ($stop_test_after seconds) timed out\n";
+		$done = 1;
+	    }
+	}
+    }
+
+    my $end_time = time;
+    $reboot_time = $end_time - $start_time;
+
+    close(DMESG);
+
+    if ($bug) {
+	return 0 if ($in_bisect);
+	fail "failed - got a bug report" and return 0;
+    }
+
+    if (!$booted) {
+	return 0 if ($in_bisect);
+	fail "failed - never got a boot prompt." and return 0;
+    }
+
+    if ($bug_ignored) {
+	doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
+    }
+
+    return 1;
+}
+
+sub eval_kernel_version {
+    my ($option) = @_;
+
+    $option =~ s/\$KERNEL_VERSION/$version/g;
+
+    return $option;
+}
+
+sub do_post_install {
+
+    return if (!defined($post_install));
+
+    my $cp_post_install = eval_kernel_version $post_install;
+    run_command "$cp_post_install" or
+	dodie "Failed to run post install";
+}
+
+# Sometimes the reboot fails, and will hang. We try to ssh to the box
+# and if we fail, we force another reboot, that should powercycle it.
+sub test_booted {
+    if (!run_ssh "echo testing connection") {
+	reboot $sleep_time;
+    }
+}
+
+sub install {
+
+    return if ($no_install);
+
+    my $start_time = time;
+
+    if (defined($pre_install)) {
+	my $cp_pre_install = eval_kernel_version $pre_install;
+	run_command "$cp_pre_install" or
+	    dodie "Failed to run pre install";
+    }
+
+    my $cp_target = eval_kernel_version $target_image;
+
+    test_booted;
+
+    run_scp_install "$outputdir/$build_target", "$cp_target" or
+	dodie "failed to copy image";
+
+    my $install_mods = 0;
+
+    # should we process modules?
+    $install_mods = 0;
+    open(IN, "$output_config") or dodie("Can't read config file");
+    while (<IN>) {
+	if (/CONFIG_MODULES(=y)?/) {
+	    if (defined($1)) {
+		$install_mods = 1;
+		last;
+	    }
+	}
+    }
+    close(IN);
+
+    if (!$install_mods) {
+	do_post_install;
+	doprint "No modules needed\n";
+	my $end_time = time;
+	$install_time = $end_time - $start_time;
+	return;
+    }
+
+    run_command "$make INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=$tmpdir modules_install" or
+	dodie "Failed to install modules";
+
+    my $modlib = "/lib/modules/$version";
+    my $modtar = "ktest-mods.tar.bz2";
+
+    run_ssh "rm -rf $modlib" or
+	dodie "failed to remove old mods: $modlib";
+
+    # would be nice if scp -r did not follow symbolic links
+    run_command "cd $tmpdir && tar -cjf $modtar lib/modules/$version" or
+	dodie "making tarball";
+
+    run_scp_mod "$tmpdir/$modtar", "/tmp" or
+	dodie "failed to copy modules";
+
+    unlink "$tmpdir/$modtar";
+
+    run_ssh "'(cd / && tar xjf /tmp/$modtar)'" or
+	dodie "failed to tar modules";
+
+    run_ssh "rm -f /tmp/$modtar";
+
+    do_post_install;
+
+    my $end_time = time;
+    $install_time = $end_time - $start_time;
+}
+
+sub get_version {
+    # get the release name
+    return if ($have_version);
+    doprint "$make kernelrelease ... ";
+    $version = `$make -s kernelrelease | tail -1`;
+    chomp($version);
+    doprint "$version\n";
+    $have_version = 1;
+}
+
+sub start_monitor_and_install {
+    # Make sure the stable kernel has finished booting
+
+    # Install bisects, don't need console
+    if (defined $console) {
+	start_monitor;
+	wait_for_monitor 5;
+	end_monitor;
+    }
+
+    get_grub_index;
+    get_version;
+    install;
+
+    start_monitor if (defined $console);
+    return monitor;
+}
+
+my $check_build_re = ".*:.*(warning|error|Error):.*";
+my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
+
+sub process_warning_line {
+    my ($line) = @_;
+
+    chomp $line;
+
+    # for distcc heterogeneous systems, some compilers
+    # do things differently causing warning lines
+    # to be slightly different. This makes an attempt
+    # to fixe those issues.
+
+    # chop off the index into the line
+    # using distcc, some compilers give different indexes
+    # depending on white space
+    $line =~ s/^(\s*\S+:\d+:)\d+/$1/;
+
+    # Some compilers use UTF-8 extended for quotes and some don't.
+    $line =~ s/$utf8_quote/'/g;
+
+    return $line;
+}
+
+# Read buildlog and check against warnings file for any
+# new warnings.
+#
+# Returns 1 if OK
+#         0 otherwise
+sub check_buildlog {
+    return 1 if (!defined $warnings_file);
+
+    my %warnings_list;
+
+    # Failed builds should not reboot the target
+    my $save_no_reboot = $no_reboot;
+    $no_reboot = 1;
+
+    if (-f $warnings_file) {
+	open(IN, $warnings_file) or
+	    dodie "Error opening $warnings_file";
+
+	while (<IN>) {
+	    if (/$check_build_re/) {
+		my $warning = process_warning_line $_;
+		
+		$warnings_list{$warning} = 1;
+	    }
+	}
+	close(IN);
+    }
+
+    # If warnings file didn't exist, and WARNINGS_FILE exist,
+    # then we fail on any warning!
+
+    open(IN, $buildlog) or dodie "Can't open $buildlog";
+    while (<IN>) {
+	if (/$check_build_re/) {
+	    my $warning = process_warning_line $_;
+
+	    if (!defined $warnings_list{$warning}) {
+		fail "New warning found (not in $warnings_file)\n$_\n";
+		$no_reboot = $save_no_reboot;
+		return 0;
+	    }
+	}
+    }
+    $no_reboot = $save_no_reboot;
+    close(IN);
+}
+
+sub check_patch_buildlog {
+    my ($patch) = @_;
+
+    my @files = `git show $patch | diffstat -l`;
+
+    foreach my $file (@files) {
+	chomp $file;
+    }
+
+    open(IN, "git show $patch |") or
+	dodie "failed to show $patch";
+    while (<IN>) {
+	if (m,^--- a/(.*),) {
+	    chomp $1;
+	    $files[$#files] = $1;
+	}
+    }
+    close(IN);
+
+    open(IN, $buildlog) or dodie "Can't open $buildlog";
+    while (<IN>) {
+	if (/^\s*(.*?):.*(warning|error)/) {
+	    my $err = $1;
+	    foreach my $file (@files) {
+		my $fullpath = "$builddir/$file";
+		if ($file eq $err || $fullpath eq $err) {
+		    fail "$file built with warnings" and return 0;
+		}
+	    }
+	}
+    }
+    close(IN);
+
+    return 1;
+}
+
+sub apply_min_config {
+    my $outconfig = "$output_config.new";
+
+    # Read the config file and remove anything that
+    # is in the force_config hash (from minconfig and others)
+    # then add the force config back.
+
+    doprint "Applying minimum configurations into $output_config.new\n";
+
+    open (OUT, ">$outconfig") or
+	dodie "Can't create $outconfig";
+
+    if (-f $output_config) {
+	open (IN, $output_config) or
+	    dodie "Failed to open $output_config";
+	while (<IN>) {
+	    if (/^(# )?(CONFIG_[^\s=]*)/) {
+		next if (defined($force_config{$2}));
+	    }
+	    print OUT;
+	}
+	close IN;
+    }
+    foreach my $config (keys %force_config) {
+	print OUT "$force_config{$config}\n";
+    }
+    close OUT;
+
+    run_command "mv $outconfig $output_config";
+}
+
+sub make_oldconfig {
+
+    my @force_list = keys %force_config;
+
+    if ($#force_list >= 0) {
+	apply_min_config;
+    }
+
+    if (!run_command "$make olddefconfig") {
+	# Perhaps olddefconfig doesn't exist in this version of the kernel
+	# try oldnoconfig
+	doprint "olddefconfig failed, trying make oldnoconfig\n";
+	if (!run_command "$make oldnoconfig") {
+	    doprint "oldnoconfig failed, trying yes '' | make oldconfig\n";
+	    # try a yes '' | oldconfig
+	    run_command "yes '' | $make oldconfig" or
+		dodie "failed make config oldconfig";
+	}
+    }
+}
+
+# read a config file and use this to force new configs.
+sub load_force_config {
+    my ($config) = @_;
+
+    doprint "Loading force configs from $config\n";
+    open(IN, $config) or
+	dodie "failed to read $config";
+    while (<IN>) {
+	chomp;
+	if (/^(CONFIG[^\s=]*)(\s*=.*)/) {
+	    $force_config{$1} = $_;
+	} elsif (/^# (CONFIG_\S*) is not set/) {
+	    $force_config{$1} = $_;
+	}
+    }
+    close IN;
+}
+
+sub build {
+    my ($type) = @_;
+
+    unlink $buildlog;
+
+    my $start_time = time;
+
+    # Failed builds should not reboot the target
+    my $save_no_reboot = $no_reboot;
+    $no_reboot = 1;
+
+    # Calculate a new version from here.
+    $have_version = 0;
+
+    if (defined($pre_build)) {
+	my $ret = run_command $pre_build;
+	if (!$ret && defined($pre_build_die) &&
+	    $pre_build_die) {
+	    dodie "failed to pre_build\n";
+	}
+    }
+
+    if ($type =~ /^useconfig:(.*)/) {
+	run_command "cp $1 $output_config" or
+	    dodie "could not copy $1 to .config";
+
+	$type = "oldconfig";
+    }
+
+    # old config can ask questions
+    if ($type eq "oldconfig") {
+	$type = "olddefconfig";
+
+	# allow for empty configs
+	run_command "touch $output_config";
+
+	if (!$noclean) {
+	    run_command "mv $output_config $outputdir/config_temp" or
+		dodie "moving .config";
+
+	    run_command "$make mrproper" or dodie "make mrproper";
+
+	    run_command "mv $outputdir/config_temp $output_config" or
+		dodie "moving config_temp";
+	}
+
+    } elsif (!$noclean) {
+	unlink "$output_config";
+	run_command "$make mrproper" or
+	    dodie "make mrproper";
+    }
+
+    # add something to distinguish this build
+    open(OUT, "> $outputdir/localversion") or dodie("Can't make localversion file");
+    print OUT "$localversion\n";
+    close(OUT);
+
+    if (defined($minconfig)) {
+	load_force_config($minconfig);
+    }
+
+    if ($type ne "olddefconfig") {
+	run_command "$make $type" or
+	    dodie "failed make config";
+    }
+    # Run old config regardless, to enforce min configurations
+    make_oldconfig;
+
+    my $build_ret = run_command "$make $build_options", $buildlog;
+
+    if (defined($post_build)) {
+	# Because a post build may change the kernel version
+	# do it now.
+	get_version;
+	my $ret = run_command $post_build;
+	if (!$ret && defined($post_build_die) &&
+	    $post_build_die) {
+	    dodie "failed to post_build\n";
+	}
+    }
+
+    if (!$build_ret) {
+	# bisect may need this to pass
+	if ($in_bisect) {
+	    $no_reboot = $save_no_reboot;
+	    return 0;
+	}
+	fail "failed build" and return 0;
+    }
+
+    $no_reboot = $save_no_reboot;
+
+    my $end_time = time;
+    $build_time = $end_time - $start_time;
+
+    return 1;
+}
+
+sub halt {
+    if (!run_ssh "halt" or defined($power_off)) {
+	if (defined($poweroff_after_halt)) {
+	    sleep $poweroff_after_halt;
+	    run_command "$power_off";
+	}
+    } else {
+	# nope? the zap it!
+	run_command "$power_off";
+    }
+}
+
+sub success {
+    my ($i) = @_;
+
+    if (defined($post_test)) {
+	run_command $post_test;
+    }
+
+    $successes++;
+
+    my $name = "";
+
+    if (defined($test_name)) {
+	$name = " ($test_name)";
+    }
+
+    print_times;
+
+    doprint "\n\n*******************************************\n";
+    doprint     "*******************************************\n";
+    doprint     "KTEST RESULT: TEST $i$name SUCCESS!!!!         **\n";
+    doprint     "*******************************************\n";
+    doprint     "*******************************************\n";
+
+    if (defined($store_successes)) {
+        save_logs "success", $store_successes;
+    }
+
+    if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
+	doprint "Reboot and wait $sleep_time seconds\n";
+	reboot_to_good $sleep_time;
+    }
+}
+
+sub answer_bisect {
+    for (;;) {
+	doprint "Pass, fail, or skip? [p/f/s]";
+	my $ans = <STDIN>;
+	chomp $ans;
+	if ($ans eq "p" || $ans eq "P") {
+	    return 1;
+	} elsif ($ans eq "f" || $ans eq "F") {
+	    return 0;
+	} elsif ($ans eq "s" || $ans eq "S") {
+	    return -1;
+	} else {
+	    print "Please answer 'p', 'f', or 's'\n";
+	}
+    }
+}
+
+sub child_run_test {
+    my $failed = 0;
+
+    # child should have no power
+    $reboot_on_error = 0;
+    $poweroff_on_error = 0;
+    $die_on_failure = 1;
+
+    run_command $run_test, $testlog or $failed = 1;
+
+    exit $failed;
+}
+
+my $child_done;
+
+sub child_finished {
+    $child_done = 1;
+}
+
+sub do_run_test {
+    my $child_pid;
+    my $child_exit;
+    my $line;
+    my $full_line;
+    my $bug = 0;
+    my $bug_ignored = 0;
+
+    my $start_time = time;
+
+    wait_for_monitor 1;
+
+    doprint "run test $run_test\n";
+
+    $child_done = 0;
+
+    $SIG{CHLD} = qw(child_finished);
+
+    $child_pid = fork;
+
+    child_run_test if (!$child_pid);
+
+    $full_line = "";
+
+    do {
+	$line = wait_for_input($monitor_fp, 1);
+	if (defined($line)) {
+
+	    # we are not guaranteed to get a full line
+	    $full_line .= $line;
+	    doprint $line;
+
+	    if ($full_line =~ /call trace:/i) {
+		if ($ignore_errors) {
+		    $bug_ignored = 1;
+		} else {
+		    $bug = 1;
+		}
+	    }
+
+	    if ($full_line =~ /Kernel panic -/) {
+		$bug = 1;
+	    }
+
+	    if ($line =~ /\n/) {
+		$full_line = "";
+	    }
+	}
+    } while (!$child_done && !$bug);
+
+    if (!$bug && $bug_ignored) {
+	doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
+    }
+
+    if ($bug) {
+	my $failure_start = time;
+	my $now;
+	do {
+	    $line = wait_for_input($monitor_fp, 1);
+	    if (defined($line)) {
+		doprint $line;
+	    }
+	    $now = time;
+	    if ($now - $failure_start >= $stop_after_failure) {
+		last;
+	    }
+	} while (defined($line));
+
+	doprint "Detected kernel crash!\n";
+	# kill the child with extreme prejudice
+	kill 9, $child_pid;
+    }
+
+    waitpid $child_pid, 0;
+    $child_exit = $?;
+
+    my $end_time = time;
+    $test_time = $end_time - $start_time;
+
+    if (!$bug && $in_bisect) {
+	if (defined($bisect_ret_good)) {
+	    if ($child_exit == $bisect_ret_good) {
+		return 1;
+	    }
+	}
+	if (defined($bisect_ret_skip)) {
+	    if ($child_exit == $bisect_ret_skip) {
+		return -1;
+	    }
+	}
+	if (defined($bisect_ret_abort)) {
+	    if ($child_exit == $bisect_ret_abort) {
+		fail "test abort" and return -2;
+	    }
+	}
+	if (defined($bisect_ret_bad)) {
+	    if ($child_exit == $bisect_ret_skip) {
+		return 0;
+	    }
+	}
+	if (defined($bisect_ret_default)) {
+	    if ($bisect_ret_default eq "good") {
+		return 1;
+	    } elsif ($bisect_ret_default eq "bad") {
+		return 0;
+	    } elsif ($bisect_ret_default eq "skip") {
+		return -1;
+	    } elsif ($bisect_ret_default eq "abort") {
+		return -2;
+	    } else {
+		fail "unknown default action: $bisect_ret_default"
+		    and return -2;
+	    }
+	}
+    }
+
+    if ($bug || $child_exit) {
+	return 0 if $in_bisect;
+	fail "test failed" and return 0;
+    }
+    return 1;
+}
+
+sub run_git_bisect {
+    my ($command) = @_;
+
+    doprint "$command ... ";
+
+    my $output = `$command 2>&1`;
+    my $ret = $?;
+
+    logit $output;
+
+    if ($ret) {
+	doprint "FAILED\n";
+	dodie "Failed to git bisect";
+    }
+
+    doprint "SUCCESS\n";
+    if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) {
+	doprint "$1 [$2]\n";
+    } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) {
+	$bisect_bad_commit = $1;
+	doprint "Found bad commit... $1\n";
+	return 0;
+    } else {
+	# we already logged it, just print it now.
+	print $output;
+    }
+
+    return 1;
+}
+
+sub bisect_reboot {
+    doprint "Reboot and sleep $bisect_sleep_time seconds\n";
+    reboot_to_good $bisect_sleep_time;
+}
+
+# returns 1 on success, 0 on failure, -1 on skip
+sub run_bisect_test {
+    my ($type, $buildtype) = @_;
+
+    my $failed = 0;
+    my $result;
+    my $output;
+    my $ret;
+
+    $in_bisect = 1;
+
+    build $buildtype or $failed = 1;
+
+    if ($type ne "build") {
+	if ($failed && $bisect_skip) {
+	    $in_bisect = 0;
+	    return -1;
+	}
+	dodie "Failed on build" if $failed;
+
+	# Now boot the box
+	start_monitor_and_install or $failed = 1;
+
+	if ($type ne "boot") {
+	    if ($failed && $bisect_skip) {
+		end_monitor;
+		bisect_reboot;
+		$in_bisect = 0;
+		return -1;
+	    }
+	    dodie "Failed on boot" if $failed;
+
+	    do_run_test or $failed = 1;
+	}
+	end_monitor;
+    }
+
+    if ($failed) {
+	$result = 0;
+    } else {
+	$result = 1;
+    }
+
+    # reboot the box to a kernel we can ssh to
+    if ($type ne "build") {
+	bisect_reboot;
+    }
+    $in_bisect = 0;
+
+    return $result;
+}
+
+sub run_bisect {
+    my ($type) = @_;
+    my $buildtype = "oldconfig";
+
+    # We should have a minconfig to use?
+    if (defined($minconfig)) {
+	$buildtype = "useconfig:$minconfig";
+    }
+
+    # If the user sets bisect_tries to less than 1, then no tries
+    # is a success.
+    my $ret = 1;
+
+    # Still let the user manually decide that though.
+    if ($bisect_tries < 1 && $bisect_manual) {
+	$ret = answer_bisect;
+    }
+
+    for (my $i = 0; $i < $bisect_tries; $i++) {
+	if ($bisect_tries > 1) {
+	    my $t = $i + 1;
+	    doprint("Running bisect trial $t of $bisect_tries:\n");
+	}
+	$ret = run_bisect_test $type, $buildtype;
+
+	if ($bisect_manual) {
+	    $ret = answer_bisect;
+	}
+
+	last if (!$ret);
+    }
+
+    # Are we looking for where it worked, not failed?
+    if ($reverse_bisect && $ret >= 0) {
+	$ret = !$ret;
+    }
+
+    if ($ret > 0) {
+	return "good";
+    } elsif ($ret == 0) {
+	return  "bad";
+    } elsif ($bisect_skip) {
+	doprint "HIT A BAD COMMIT ... SKIPPING\n";
+	return "skip";
+    }
+}
+
+sub update_bisect_replay {
+    my $tmp_log = "$tmpdir/ktest_bisect_log";
+    run_command "git bisect log > $tmp_log" or
+	die "can't create bisect log";
+    return $tmp_log;
+}
+
+sub bisect {
+    my ($i) = @_;
+
+    my $result;
+
+    die "BISECT_GOOD[$i] not defined\n"	if (!defined($bisect_good));
+    die "BISECT_BAD[$i] not defined\n"	if (!defined($bisect_bad));
+    die "BISECT_TYPE[$i] not defined\n"	if (!defined($bisect_type));
+
+    my $good = $bisect_good;
+    my $bad = $bisect_bad;
+    my $type = $bisect_type;
+    my $start = $bisect_start;
+    my $replay = $bisect_replay;
+    my $start_files = $bisect_files;
+
+    if (defined($start_files)) {
+	$start_files = " -- " . $start_files;
+    } else {
+	$start_files = "";
+    }
+
+    # convert to true sha1's
+    $good = get_sha1($good);
+    $bad = get_sha1($bad);
+
+    if (defined($bisect_reverse) && $bisect_reverse == 1) {
+	doprint "Performing a reverse bisect (bad is good, good is bad!)\n";
+	$reverse_bisect = 1;
+    } else {
+	$reverse_bisect = 0;
+    }
+
+    # Can't have a test without having a test to run
+    if ($type eq "test" && !defined($run_test)) {
+	$type = "boot";
+    }
+
+    # Check if a bisect was running
+    my $bisect_start_file = "$builddir/.git/BISECT_START";
+
+    my $check = $bisect_check;
+    my $do_check = defined($check) && $check ne "0";
+
+    if ( -f $bisect_start_file ) {
+	print "Bisect in progress found\n";
+	if ($do_check) {
+	    print " If you say yes, then no checks of good or bad will be done\n";
+	}
+	if (defined($replay)) {
+	    print "** BISECT_REPLAY is defined in config file **";
+	    print " Ignore config option and perform new git bisect log?\n";
+	    if (read_ync " (yes, no, or cancel) ") {
+		$replay = update_bisect_replay;
+		$do_check = 0;
+	    }
+	} elsif (read_yn "read git log and continue?") {
+	    $replay = update_bisect_replay;
+	    $do_check = 0;
+	}
+    }
+
+    if ($do_check) {
+
+	# get current HEAD
+	my $head = get_sha1("HEAD");
+
+	if ($check ne "good") {
+	    doprint "TESTING BISECT BAD [$bad]\n";
+	    run_command "git checkout $bad" or
+		die "Failed to checkout $bad";
+
+	    $result = run_bisect $type;
+
+	    if ($result ne "bad") {
+		fail "Tested BISECT_BAD [$bad] and it succeeded" and return 0;
+	    }
+	}
+
+	if ($check ne "bad") {
+	    doprint "TESTING BISECT GOOD [$good]\n";
+	    run_command "git checkout $good" or
+		die "Failed to checkout $good";
+
+	    $result = run_bisect $type;
+
+	    if ($result ne "good") {
+		fail "Tested BISECT_GOOD [$good] and it failed" and return 0;
+	    }
+	}
+
+	# checkout where we started
+	run_command "git checkout $head" or
+	    die "Failed to checkout $head";
+    }
+
+    run_command "git bisect start$start_files" or
+	dodie "could not start bisect";
+
+    if (defined($replay)) {
+	run_command "git bisect replay $replay" or
+	    dodie "failed to run replay";
+    } else {
+
+	run_command "git bisect good $good" or
+	    dodie "could not set bisect good to $good";
+
+	run_git_bisect "git bisect bad $bad" or
+	    dodie "could not set bisect bad to $bad";
+
+    }
+
+    if (defined($start)) {
+	run_command "git checkout $start" or
+	    dodie "failed to checkout $start";
+    }
+
+    my $test;
+    do {
+	$result = run_bisect $type;
+	$test = run_git_bisect "git bisect $result";
+	print_times;
+    } while ($test);
+
+    run_command "git bisect log" or
+	dodie "could not capture git bisect log";
+
+    run_command "git bisect reset" or
+	dodie "could not reset git bisect";
+
+    doprint "Bad commit was [$bisect_bad_commit]\n";
+
+    success $i;
+}
+
+# config_ignore holds the configs that were set (or unset) for
+# a good config and we will ignore these configs for the rest
+# of a config bisect. These configs stay as they were.
+my %config_ignore;
+
+# config_set holds what all configs were set as.
+my %config_set;
+
+# config_off holds the set of configs that the bad config had disabled.
+# We need to record them and set them in the .config when running
+# olddefconfig, because olddefconfig keeps the defaults.
+my %config_off;
+
+# config_off_tmp holds a set of configs to turn off for now
+my @config_off_tmp;
+
+# config_list is the set of configs that are being tested
+my %config_list;
+my %null_config;
+
+my %dependency;
+
+sub assign_configs {
+    my ($hash, $config) = @_;
+
+    doprint "Reading configs from $config\n";
+
+    open (IN, $config)
+	or dodie "Failed to read $config";
+
+    while (<IN>) {
+	chomp;
+	if (/^((CONFIG\S*)=.*)/) {
+	    ${$hash}{$2} = $1;
+	} elsif (/^(# (CONFIG\S*) is not set)/) {
+	    ${$hash}{$2} = $1;
+	}
+    }
+
+    close(IN);
+}
+
+sub process_config_ignore {
+    my ($config) = @_;
+
+    assign_configs \%config_ignore, $config;
+}
+
+sub get_dependencies {
+    my ($config) = @_;
+
+    my $arr = $dependency{$config};
+    if (!defined($arr)) {
+	return ();
+    }
+
+    my @deps = @{$arr};
+
+    foreach my $dep (@{$arr}) {
+	print "ADD DEP $dep\n";
+	@deps = (@deps, get_dependencies $dep);
+    }
+
+    return @deps;
+}
+
+sub save_config {
+    my ($pc, $file) = @_;
+
+    my %configs = %{$pc};
+
+    doprint "Saving configs into $file\n";
+
+    open(OUT, ">$file") or dodie "Can not write to $file";
+
+    foreach my $config (keys %configs) {
+	print OUT "$configs{$config}\n";
+    }
+    close(OUT);
+}
+
+sub create_config {
+    my ($name, $pc) = @_;
+
+    doprint "Creating old config from $name configs\n";
+
+    save_config $pc, $output_config;
+
+    make_oldconfig;
+}
+
+# compare two config hashes, and return configs with different vals.
+# It returns B's config values, but you can use A to see what A was.
+sub diff_config_vals {
+    my ($pa, $pb) = @_;
+
+    # crappy Perl way to pass in hashes.
+    my %a = %{$pa};
+    my %b = %{$pb};
+
+    my %ret;
+
+    foreach my $item (keys %a) {
+	if (defined($b{$item}) && $b{$item} ne $a{$item}) {
+	    $ret{$item} = $b{$item};
+	}
+    }
+
+    return %ret;
+}
+
+# compare two config hashes and return the configs in B but not A
+sub diff_configs {
+    my ($pa, $pb) = @_;
+
+    my %ret;
+
+    # crappy Perl way to pass in hashes.
+    my %a = %{$pa};
+    my %b = %{$pb};
+
+    foreach my $item (keys %b) {
+	if (!defined($a{$item})) {
+	    $ret{$item} = $b{$item};
+	}
+    }
+
+    return %ret;
+}
+
+# return if two configs are equal or not
+# 0 is equal +1 b has something a does not
+# +1 if a and b have a different item.
+# -1 if a has something b does not
+sub compare_configs {
+    my ($pa, $pb) = @_;
+
+    my %ret;
+
+    # crappy Perl way to pass in hashes.
+    my %a = %{$pa};
+    my %b = %{$pb};
+
+    foreach my $item (keys %b) {
+	if (!defined($a{$item})) {
+	    return 1;
+	}
+	if ($a{$item} ne $b{$item}) {
+	    return 1;
+	}
+    }
+
+    foreach my $item (keys %a) {
+	if (!defined($b{$item})) {
+	    return -1;
+	}
+    }
+
+    return 0;
+}
+
+sub run_config_bisect_test {
+    my ($type) = @_;
+
+    my $ret = run_bisect_test $type, "oldconfig";
+
+    if ($bisect_manual) {
+	$ret = answer_bisect;
+    }
+
+    return $ret;
+}
+
+sub process_failed {
+    my ($config) = @_;
+
+    doprint "\n\n***************************************\n";
+    doprint "Found bad config: $config\n";
+    doprint "***************************************\n\n";
+}
+
+# used for config bisecting
+my $good_config;
+my $bad_config;
+
+sub process_new_config {
+    my ($tc, $nc, $gc, $bc) = @_;
+
+    my %tmp_config = %{$tc};
+    my %good_configs = %{$gc};
+    my %bad_configs = %{$bc};
+
+    my %new_configs;
+
+    my $runtest = 1;
+    my $ret;
+
+    create_config "tmp_configs", \%tmp_config;
+    assign_configs \%new_configs, $output_config;
+
+    $ret = compare_configs \%new_configs, \%bad_configs;
+    if (!$ret) {
+	doprint "New config equals bad config, try next test\n";
+	$runtest = 0;
+    }
+
+    if ($runtest) {
+	$ret = compare_configs \%new_configs, \%good_configs;
+	if (!$ret) {
+	    doprint "New config equals good config, try next test\n";
+	    $runtest = 0;
+	}
+    }
+
+    %{$nc} = %new_configs;
+
+    return $runtest;
+}
+
+sub run_config_bisect {
+    my ($pgood, $pbad) = @_;
+
+    my $type = $config_bisect_type;
+
+    my %good_configs = %{$pgood};
+    my %bad_configs = %{$pbad};
+
+    my %diff_configs = diff_config_vals \%good_configs, \%bad_configs;
+    my %b_configs = diff_configs \%good_configs, \%bad_configs;
+    my %g_configs = diff_configs \%bad_configs, \%good_configs;
+
+    my @diff_arr = keys %diff_configs;
+    my $len_diff = $#diff_arr + 1;
+
+    my @b_arr = keys %b_configs;
+    my $len_b = $#b_arr + 1;
+
+    my @g_arr = keys %g_configs;
+    my $len_g = $#g_arr + 1;
+
+    my $runtest = 1;
+    my %new_configs;
+    my $ret;
+
+    # First, lets get it down to a single subset.
+    # Is the problem with a difference in values?
+    # Is the problem with a missing config?
+    # Is the problem with a config that breaks things?
+
+    # Enable all of one set and see if we get a new bad
+    # or good config.
+
+    # first set the good config to the bad values.
+
+    doprint "d=$len_diff g=$len_g b=$len_b\n";
+
+    # first lets enable things in bad config that are enabled in good config
+
+    if ($len_diff > 0) {
+	if ($len_b > 0 || $len_g > 0) {
+	    my %tmp_config = %bad_configs;
+
+	    doprint "Set tmp config to be bad config with good config values\n";
+	    foreach my $item (@diff_arr) {
+		$tmp_config{$item} = $good_configs{$item};
+	    }
+
+	    $runtest = process_new_config \%tmp_config, \%new_configs,
+			    \%good_configs, \%bad_configs;
+	}
+    }
+
+    if (!$runtest && $len_diff > 0) {
+
+	if ($len_diff == 1) {
+	    process_failed $diff_arr[0];
+	    return 1;
+	}
+	my %tmp_config = %bad_configs;
+
+	my $half = int($#diff_arr / 2);
+	my @tophalf = @diff_arr[0 .. $half];
+
+	doprint "Settings bisect with top half:\n";
+	doprint "Set tmp config to be bad config with some good config values\n";
+	foreach my $item (@tophalf) {
+	    $tmp_config{$item} = $good_configs{$item};
+	}
+
+	$runtest = process_new_config \%tmp_config, \%new_configs,
+			    \%good_configs, \%bad_configs;
+
+	if (!$runtest) {
+	    my %tmp_config = %bad_configs;
+
+	    doprint "Try bottom half\n";
+
+	    my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr];
+
+	    foreach my $item (@bottomhalf) {
+		$tmp_config{$item} = $good_configs{$item};
+	    }
+
+	    $runtest = process_new_config \%tmp_config, \%new_configs,
+			    \%good_configs, \%bad_configs;
+	}
+    }
+
+    if ($runtest) {
+	$ret = run_config_bisect_test $type;
+	if ($ret) {
+	    doprint "NEW GOOD CONFIG\n";
+	    %good_configs = %new_configs;
+	    run_command "mv $good_config ${good_config}.last";
+	    save_config \%good_configs, $good_config;
+	    %{$pgood} = %good_configs;
+	} else {
+	    doprint "NEW BAD CONFIG\n";
+	    %bad_configs = %new_configs;
+	    run_command "mv $bad_config ${bad_config}.last";
+	    save_config \%bad_configs, $bad_config;
+	    %{$pbad} = %bad_configs;
+	}
+	return 0;
+    }
+
+    fail "Hmm, need to do a mix match?\n";
+    return -1;
+}
+
+sub config_bisect {
+    my ($i) = @_;
+
+    my $type = $config_bisect_type;
+    my $ret;
+
+    $bad_config = $config_bisect;
+
+    if (defined($config_bisect_good)) {
+	$good_config = $config_bisect_good;
+    } elsif (defined($minconfig)) {
+	$good_config = $minconfig;
+    } else {
+	doprint "No config specified, checking if defconfig works";
+	$ret = run_bisect_test $type, "defconfig";
+	if (!$ret) {
+	    fail "Have no good config to compare with, please set CONFIG_BISECT_GOOD";
+	    return 1;
+	}
+	$good_config = $output_config;
+    }
+
+    # we don't want min configs to cause issues here.
+    doprint "Disabling 'MIN_CONFIG' for this test\n";
+    undef $minconfig;
+
+    my %good_configs;
+    my %bad_configs;
+    my %tmp_configs;
+
+    doprint "Run good configs through make oldconfig\n";
+    assign_configs \%tmp_configs, $good_config;
+    create_config "$good_config", \%tmp_configs;
+    assign_configs \%good_configs, $output_config;
+
+    doprint "Run bad configs through make oldconfig\n";
+    assign_configs \%tmp_configs, $bad_config;
+    create_config "$bad_config", \%tmp_configs;
+    assign_configs \%bad_configs, $output_config;
+
+    $good_config = "$tmpdir/good_config";
+    $bad_config = "$tmpdir/bad_config";
+
+    save_config \%good_configs, $good_config;
+    save_config \%bad_configs, $bad_config;
+
+
+    if (defined($config_bisect_check) && $config_bisect_check ne "0") {
+	if ($config_bisect_check ne "good") {
+	    doprint "Testing bad config\n";
+
+	    $ret = run_bisect_test $type, "useconfig:$bad_config";
+	    if ($ret) {
+		fail "Bad config succeeded when expected to fail!";
+		return 0;
+	    }
+	}
+	if ($config_bisect_check ne "bad") {
+	    doprint "Testing good config\n";
+
+	    $ret = run_bisect_test $type, "useconfig:$good_config";
+	    if (!$ret) {
+		fail "Good config failed when expected to succeed!";
+		return 0;
+	    }
+	}
+    }
+
+    do {
+	$ret = run_config_bisect \%good_configs, \%bad_configs;
+	print_times;
+    } while (!$ret);
+
+    return $ret if ($ret < 0);
+
+    success $i;
+}
+
+sub patchcheck_reboot {
+    doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
+    reboot_to_good $patchcheck_sleep_time;
+}
+
+sub patchcheck {
+    my ($i) = @_;
+
+    die "PATCHCHECK_START[$i] not defined\n"
+	if (!defined($patchcheck_start));
+    die "PATCHCHECK_TYPE[$i] not defined\n"
+	if (!defined($patchcheck_type));
+
+    my $start = $patchcheck_start;
+
+    my $cherry = $patchcheck_cherry;
+    if (!defined($cherry)) {
+	$cherry = 0;
+    }
+
+    my $end = "HEAD";
+    if (defined($patchcheck_end)) {
+	$end = $patchcheck_end;
+    } elsif ($cherry) {
+	die "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n";
+    }
+
+    # Get the true sha1's since we can use things like HEAD~3
+    $start = get_sha1($start);
+    $end = get_sha1($end);
+
+    my $type = $patchcheck_type;
+
+    # Can't have a test without having a test to run
+    if ($type eq "test" && !defined($run_test)) {
+	$type = "boot";
+    }
+
+    if ($cherry) {
+	open (IN, "git cherry -v $start $end|") or
+	    dodie "could not get git list";
+    } else {
+	open (IN, "git log --pretty=oneline $end|") or
+	    dodie "could not get git list";
+    }
+
+    my @list;
+
+    while (<IN>) {
+	chomp;
+	# git cherry adds a '+' we want to remove
+	s/^\+ //;
+	$list[$#list+1] = $_;
+	last if (/^$start/);
+    }
+    close(IN);
+
+    if (!$cherry) {
+	if ($list[$#list] !~ /^$start/) {
+	    fail "SHA1 $start not found";
+	}
+
+	# go backwards in the list
+	@list = reverse @list;
+    }
+
+    doprint("Going to test the following commits:\n");
+    foreach my $l (@list) {
+	doprint "$l\n";
+    }
+
+    my $save_clean = $noclean;
+    my %ignored_warnings;
+
+    if (defined($ignore_warnings)) {
+	foreach my $sha1 (split /\s+/, $ignore_warnings) {
+	    $ignored_warnings{$sha1} = 1;
+	}
+    }
+
+    $in_patchcheck = 1;
+    foreach my $item (@list) {
+	my $sha1 = $item;
+	$sha1 =~ s/^([[:xdigit:]]+).*/$1/;
+
+	doprint "\nProcessing commit \"$item\"\n\n";
+
+	run_command "git checkout $sha1" or
+	    die "Failed to checkout $sha1";
+
+	# only clean on the first and last patch
+	if ($item eq $list[0] ||
+	    $item eq $list[$#list]) {
+	    $noclean = $save_clean;
+	} else {
+	    $noclean = 1;
+	}
+
+	if (defined($minconfig)) {
+	    build "useconfig:$minconfig" or return 0;
+	} else {
+	    # ?? no config to use?
+	    build "oldconfig" or return 0;
+	}
+
+	# No need to do per patch checking if warnings file exists
+	if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) {
+	    check_patch_buildlog $sha1 or return 0;
+	}
+
+	check_buildlog or return 0;
+
+	next if ($type eq "build");
+
+	my $failed = 0;
+
+	start_monitor_and_install or $failed = 1;
+
+	if (!$failed && $type ne "boot"){
+	    do_run_test or $failed = 1;
+	}
+	end_monitor;
+	if ($failed) {
+	    print_times;
+	    return 0;
+	}
+	patchcheck_reboot;
+	print_times;
+    }
+    $in_patchcheck = 0;
+    success $i;
+
+    return 1;
+}
+
+my %depends;
+my %depcount;
+my $iflevel = 0;
+my @ifdeps;
+
+# prevent recursion
+my %read_kconfigs;
+
+sub add_dep {
+    # $config depends on $dep
+    my ($config, $dep) = @_;
+
+    if (defined($depends{$config})) {
+	$depends{$config} .= " " . $dep;
+    } else {
+	$depends{$config} = $dep;
+    }
+
+    # record the number of configs depending on $dep
+    if (defined $depcount{$dep}) {
+	$depcount{$dep}++;
+    } else {
+	$depcount{$dep} = 1;
+    } 
+}
+
+# taken from streamline_config.pl
+sub read_kconfig {
+    my ($kconfig) = @_;
+
+    my $state = "NONE";
+    my $config;
+    my @kconfigs;
+
+    my $cont = 0;
+    my $line;
+
+
+    if (! -f $kconfig) {
+	doprint "file $kconfig does not exist, skipping\n";
+	return;
+    }
+
+    open(KIN, "$kconfig")
+	or die "Can't open $kconfig";
+    while (<KIN>) {
+	chomp;
+
+	# Make sure that lines ending with \ continue
+	if ($cont) {
+	    $_ = $line . " " . $_;
+	}
+
+	if (s/\\$//) {
+	    $cont = 1;
+	    $line = $_;
+	    next;
+	}
+
+	$cont = 0;
+
+	# collect any Kconfig sources
+	if (/^source\s*"(.*)"/) {
+	    $kconfigs[$#kconfigs+1] = $1;
+	}
+
+	# configs found
+	if (/^\s*(menu)?config\s+(\S+)\s*$/) {
+	    $state = "NEW";
+	    $config = $2;
+
+	    for (my $i = 0; $i < $iflevel; $i++) {
+		add_dep $config, $ifdeps[$i];
+	    }
+
+	# collect the depends for the config
+	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
+
+	    add_dep $config, $1;
+
+	# Get the configs that select this config
+	} elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+	    # selected by depends on config
+	    add_dep $1, $config;
+
+	# Check for if statements
+	} elsif (/^if\s+(.*\S)\s*$/) {
+	    my $deps = $1;
+	    # remove beginning and ending non text
+	    $deps =~ s/^[^a-zA-Z0-9_]*//;
+	    $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+	    my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+	    $ifdeps[$iflevel++] = join ':', @deps;
+
+	} elsif (/^endif/) {
+
+	    $iflevel-- if ($iflevel);
+
+	# stop on "help"
+	} elsif (/^\s*help\s*$/) {
+	    $state = "NONE";
+	}
+    }
+    close(KIN);
+
+    # read in any configs that were found.
+    foreach $kconfig (@kconfigs) {
+	if (!defined($read_kconfigs{$kconfig})) {
+	    $read_kconfigs{$kconfig} = 1;
+	    read_kconfig("$builddir/$kconfig");
+	}
+    }
+}
+
+sub read_depends {
+    # find out which arch this is by the kconfig file
+    open (IN, $output_config)
+	or dodie "Failed to read $output_config";
+    my $arch;
+    while (<IN>) {
+	if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) {
+	    $arch = $1;
+	    last;
+	}
+    }
+    close IN;
+
+    if (!defined($arch)) {
+	doprint "Could not find arch from config file\n";
+	doprint "no dependencies used\n";
+	return;
+    }
+
+    # arch is really the subarch, we need to know
+    # what directory to look at.
+    if ($arch eq "i386" || $arch eq "x86_64") {
+	$arch = "x86";
+    } elsif ($arch =~ /^tile/) {
+	$arch = "tile";
+    }
+
+    my $kconfig = "$builddir/arch/$arch/Kconfig";
+
+    if (! -f $kconfig && $arch =~ /\d$/) {
+	my $orig = $arch;
+ 	# some subarchs have numbers, truncate them
+	$arch =~ s/\d*$//;
+	$kconfig = "$builddir/arch/$arch/Kconfig";
+	if (! -f $kconfig) {
+	    doprint "No idea what arch dir $orig is for\n";
+	    doprint "no dependencies used\n";
+	    return;
+	}
+    }
+
+    read_kconfig($kconfig);
+}
+
+sub make_new_config {
+    my @configs = @_;
+
+    open (OUT, ">$output_config")
+	or dodie "Failed to write $output_config";
+
+    foreach my $config (@configs) {
+	print OUT "$config\n";
+    }
+    close OUT;
+}
+
+sub chomp_config {
+    my ($config) = @_;
+
+    $config =~ s/CONFIG_//;
+
+    return $config;
+}
+
+sub get_depends {
+    my ($dep) = @_;
+
+    my $kconfig = chomp_config $dep;
+
+    $dep = $depends{"$kconfig"};
+
+    # the dep string we have saves the dependencies as they
+    # were found, including expressions like ! && ||. We
+    # want to split this out into just an array of configs.
+
+    my $valid = "A-Za-z_0-9";
+
+    my @configs;
+
+    while ($dep =~ /[$valid]/) {
+
+	if ($dep =~ /^[^$valid]*([$valid]+)/) {
+	    my $conf = "CONFIG_" . $1;
+
+	    $configs[$#configs + 1] = $conf;
+
+	    $dep =~ s/^[^$valid]*[$valid]+//;
+	} else {
+	    die "this should never happen";
+	}
+    }
+
+    return @configs;
+}
+
+my %min_configs;
+my %keep_configs;
+my %save_configs;
+my %processed_configs;
+my %nochange_config;
+
+sub test_this_config {
+    my ($config) = @_;
+
+    my $found;
+
+    # if we already processed this config, skip it
+    if (defined($processed_configs{$config})) {
+	return undef;
+    }
+    $processed_configs{$config} = 1;
+
+    # if this config failed during this round, skip it
+    if (defined($nochange_config{$config})) {
+	return undef;
+    }
+
+    my $kconfig = chomp_config $config;
+
+    # Test dependencies first
+    if (defined($depends{"$kconfig"})) {
+	my @parents = get_depends $config;
+	foreach my $parent (@parents) {
+	    # if the parent is in the min config, check it first
+	    next if (!defined($min_configs{$parent}));
+	    $found = test_this_config($parent);
+	    if (defined($found)) {
+		return $found;
+	    }
+	}
+    }
+
+    # Remove this config from the list of configs
+    # do a make olddefconfig and then read the resulting
+    # .config to make sure it is missing the config that
+    # we had before
+    my %configs = %min_configs;
+    delete $configs{$config};
+    make_new_config ((values %configs), (values %keep_configs));
+    make_oldconfig;
+    undef %configs;
+    assign_configs \%configs, $output_config;
+
+    if (!defined($configs{$config}) || $configs{$config} =~ /^#/) {
+	return $config;
+    }
+
+    doprint "disabling config $config did not change .config\n";
+
+    $nochange_config{$config} = 1;
+
+    return undef;
+}
+
+sub make_min_config {
+    my ($i) = @_;
+
+    my $type = $minconfig_type;
+    if ($type ne "boot" && $type ne "test") {
+	fail "Invalid MIN_CONFIG_TYPE '$minconfig_type'\n" .
+	    " make_min_config works only with 'boot' and 'test'\n" and return;
+    }
+
+    if (!defined($output_minconfig)) {
+	fail "OUTPUT_MIN_CONFIG not defined" and return;
+    }
+
+    # If output_minconfig exists, and the start_minconfig
+    # came from min_config, than ask if we should use
+    # that instead.
+    if (-f $output_minconfig && !$start_minconfig_defined) {
+	print "$output_minconfig exists\n";
+	if (!defined($use_output_minconfig)) {
+	    if (read_yn " Use it as minconfig?") {
+		$start_minconfig = $output_minconfig;
+	    }
+	} elsif ($use_output_minconfig > 0) {
+	    doprint "Using $output_minconfig as MIN_CONFIG\n";
+	    $start_minconfig = $output_minconfig;
+	} else {
+	    doprint "Set to still use MIN_CONFIG as starting point\n";
+	}
+    }
+
+    if (!defined($start_minconfig)) {
+	fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return;
+    }
+
+    my $temp_config = "$tmpdir/temp_config";
+
+    # First things first. We build an allnoconfig to find
+    # out what the defaults are that we can't touch.
+    # Some are selections, but we really can't handle selections.
+
+    my $save_minconfig = $minconfig;
+    undef $minconfig;
+
+    run_command "$make allnoconfig" or return 0;
+
+    read_depends;
+
+    process_config_ignore $output_config;
+
+    undef %save_configs;
+    undef %min_configs;
+
+    if (defined($ignore_config)) {
+	# make sure the file exists
+	`touch $ignore_config`;
+	assign_configs \%save_configs, $ignore_config;
+    }
+
+    %keep_configs = %save_configs;
+
+    doprint "Load initial configs from $start_minconfig\n";
+
+    # Look at the current min configs, and save off all the
+    # ones that were set via the allnoconfig
+    assign_configs \%min_configs, $start_minconfig;
+
+    my @config_keys = keys %min_configs;
+
+    # All configs need a depcount
+    foreach my $config (@config_keys) {
+	my $kconfig = chomp_config $config;
+	if (!defined $depcount{$kconfig}) {
+		$depcount{$kconfig} = 0;
+	}
+    }
+
+    # Remove anything that was set by the make allnoconfig
+    # we shouldn't need them as they get set for us anyway.
+    foreach my $config (@config_keys) {
+	# Remove anything in the ignore_config
+	if (defined($keep_configs{$config})) {
+	    my $file = $ignore_config;
+	    $file =~ s,.*/(.*?)$,$1,;
+	    doprint "$config set by $file ... ignored\n";
+	    delete $min_configs{$config};
+	    next;
+	}
+	# But make sure the settings are the same. If a min config
+	# sets a selection, we do not want to get rid of it if
+	# it is not the same as what we have. Just move it into
+	# the keep configs.
+	if (defined($config_ignore{$config})) {
+	    if ($config_ignore{$config} ne $min_configs{$config}) {
+		doprint "$config is in allnoconfig as '$config_ignore{$config}'";
+		doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n";
+		$keep_configs{$config} = $min_configs{$config};
+	    } else {
+		doprint "$config set by allnoconfig ... ignored\n";
+	    }
+	    delete $min_configs{$config};
+	}
+    }
+
+    my $done = 0;
+    my $take_two = 0;
+
+    while (!$done) {
+
+	my $config;
+	my $found;
+
+	# Now disable each config one by one and do a make oldconfig
+	# till we find a config that changes our list.
+
+	my @test_configs = keys %min_configs;
+
+	# Sort keys by who is most dependent on
+	@test_configs = sort  { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+			  @test_configs ;
+
+	# Put configs that did not modify the config at the end.
+	my $reset = 1;
+	for (my $i = 0; $i < $#test_configs; $i++) {
+	    if (!defined($nochange_config{$test_configs[0]})) {
+		$reset = 0;
+		last;
+	    }
+	    # This config didn't change the .config last time.
+	    # Place it at the end
+	    my $config = shift @test_configs;
+	    push @test_configs, $config;
+	}
+
+	# if every test config has failed to modify the .config file
+	# in the past, then reset and start over.
+	if ($reset) {
+	    undef %nochange_config;
+	}
+
+	undef %processed_configs;
+
+	foreach my $config (@test_configs) {
+
+	    $found = test_this_config $config;
+
+	    last if (defined($found));
+
+	    # oh well, try another config
+	}
+
+	if (!defined($found)) {
+	    # we could have failed due to the nochange_config hash
+	    # reset and try again
+	    if (!$take_two) {
+		undef %nochange_config;
+		$take_two = 1;
+		next;
+	    }
+	    doprint "No more configs found that we can disable\n";
+	    $done = 1;
+	    last;
+	}
+	$take_two = 0;
+
+	$config = $found;
+
+	doprint "Test with $config disabled\n";
+
+	# set in_bisect to keep build and monitor from dieing
+	$in_bisect = 1;
+
+	my $failed = 0;
+	build "oldconfig" or $failed = 1;
+	if (!$failed) {
+		start_monitor_and_install or $failed = 1;
+
+		if ($type eq "test" && !$failed) {
+		    do_run_test or $failed = 1;
+		}
+
+		end_monitor;
+	}
+
+	$in_bisect = 0;
+
+	if ($failed) {
+	    doprint "$min_configs{$config} is needed to boot the box... keeping\n";
+	    # this config is needed, add it to the ignore list.
+	    $keep_configs{$config} = $min_configs{$config};
+	    $save_configs{$config} = $min_configs{$config};
+	    delete $min_configs{$config};
+
+	    # update new ignore configs
+	    if (defined($ignore_config)) {
+		open (OUT, ">$temp_config")
+		    or die "Can't write to $temp_config";
+		foreach my $config (keys %save_configs) {
+		    print OUT "$save_configs{$config}\n";
+		}
+		close OUT;
+		run_command "mv $temp_config $ignore_config" or
+		    dodie "failed to copy update to $ignore_config";
+	    }
+
+	} else {
+	    # We booted without this config, remove it from the minconfigs.
+	    doprint "$config is not needed, disabling\n";
+
+	    delete $min_configs{$config};
+
+	    # Also disable anything that is not enabled in this config
+	    my %configs;
+	    assign_configs \%configs, $output_config;
+	    my @config_keys = keys %min_configs;
+	    foreach my $config (@config_keys) {
+		if (!defined($configs{$config})) {
+		    doprint "$config is not set, disabling\n";
+		    delete $min_configs{$config};
+		}
+	    }
+
+	    # Save off all the current mandidory configs
+	    open (OUT, ">$temp_config")
+		or die "Can't write to $temp_config";
+	    foreach my $config (keys %keep_configs) {
+		print OUT "$keep_configs{$config}\n";
+	    }
+	    foreach my $config (keys %min_configs) {
+		print OUT "$min_configs{$config}\n";
+	    }
+	    close OUT;
+
+	    run_command "mv $temp_config $output_minconfig" or
+		dodie "failed to copy update to $output_minconfig";
+	}
+
+	doprint "Reboot and wait $sleep_time seconds\n";
+	reboot_to_good $sleep_time;
+    }
+
+    success $i;
+    return 1;
+}
+
+sub make_warnings_file {
+    my ($i) = @_;
+
+    if (!defined($warnings_file)) {
+	dodie "Must define WARNINGS_FILE for make_warnings_file test";
+    }
+
+    if ($build_type eq "nobuild") {
+	dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test";
+    }
+
+    build $build_type or dodie "Failed to build";
+
+    open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file";
+
+    open(IN, $buildlog) or dodie "Can't open $buildlog";
+    while (<IN>) {
+
+	# Some compilers use UTF-8 extended for quotes
+	# for distcc heterogeneous systems, this causes issues
+	s/$utf8_quote/'/g;
+
+	if (/$check_build_re/) {
+	    print OUT;
+	}
+    }
+    close(IN);
+
+    close(OUT);
+
+    success $i;
+}
+
+$#ARGV < 1 or die "ktest.pl version: $VERSION\n   usage: ktest.pl [config-file]\n";
+
+if ($#ARGV == 0) {
+    $ktest_config = $ARGV[0];
+    if (! -f $ktest_config) {
+	print "$ktest_config does not exist.\n";
+	if (!read_yn "Create it?") {
+	    exit 0;
+	}
+    }
+}
+
+if (! -f $ktest_config) {
+    $newconfig = 1;
+    get_test_case;
+    open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
+    print OUT << "EOF"
+# Generated by ktest.pl
+#
+
+# PWD is a ktest.pl variable that will result in the process working
+# directory that ktest.pl is executed in.
+
+# THIS_DIR is automatically assigned the PWD of the path that generated
+# the config file. It is best to use this variable when assigning other
+# directory paths within this directory. This allows you to easily
+# move the test cases to other locations or to other machines.
+#
+THIS_DIR := $variable{"PWD"}
+
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START
+TEST_TYPE = $default{"TEST_TYPE"}
+
+DEFAULTS
+EOF
+;
+    close(OUT);
+}
+read_config $ktest_config;
+
+if (defined($opt{"LOG_FILE"})) {
+    $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1);
+}
+
+# Append any configs entered in manually to the config file.
+my @new_configs = keys %entered_configs;
+if ($#new_configs >= 0) {
+    print "\nAppending entered in configs to $ktest_config\n";
+    open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
+    foreach my $config (@new_configs) {
+	print OUT "$config = $entered_configs{$config}\n";
+	$opt{$config} = process_variables($entered_configs{$config});
+    }
+}
+
+if ($opt{"CLEAR_LOG"} && defined($opt{"LOG_FILE"})) {
+    unlink $opt{"LOG_FILE"};
+}
+
+doprint "\n\nSTARTING AUTOMATED TESTS\n\n";
+
+for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) {
+
+    if (!$i) {
+	doprint "DEFAULT OPTIONS:\n";
+    } else {
+	doprint "\nTEST $i OPTIONS";
+	if (defined($repeat_tests{$i})) {
+	    $repeat = $repeat_tests{$i};
+	    doprint " ITERATE $repeat";
+	}
+	doprint "\n";
+    }
+
+    foreach my $option (sort keys %opt) {
+
+	if ($option =~ /\[(\d+)\]$/) {
+	    next if ($i != $1);
+	} else {
+	    next if ($i);
+	}
+
+	doprint "$option = $opt{$option}\n";
+    }
+}
+
+sub option_defined {
+    my ($option) = @_;
+
+    if (defined($opt{$option}) && $opt{$option} !~ /^\s*$/) {
+	return 1;
+    }
+
+    return 0;
+}
+
+sub __set_test_option {
+    my ($name, $i) = @_;
+
+    my $option = "$name\[$i\]";
+
+    if (option_defined($option)) {
+	return $opt{$option};
+    }
+
+    foreach my $test (keys %repeat_tests) {
+	if ($i >= $test &&
+	    $i < $test + $repeat_tests{$test}) {
+	    $option = "$name\[$test\]";
+	    if (option_defined($option)) {
+		return $opt{$option};
+	    }
+	}
+    }
+
+    if (option_defined($name)) {
+	return $opt{$name};
+    }
+
+    return undef;
+}
+
+sub set_test_option {
+    my ($name, $i) = @_;
+
+    my $option = __set_test_option($name, $i);
+    return $option if (!defined($option));
+
+    return eval_option($name, $option, $i);
+}
+
+# First we need to do is the builds
+for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+
+    # Do not reboot on failing test options
+    $no_reboot = 1;
+    $reboot_success = 0;
+
+    $have_version = 0;
+
+    $iteration = $i;
+
+    $build_time = 0;
+    $install_time = 0;
+    $reboot_time = 0;
+    $test_time = 0;
+
+    undef %force_config;
+
+    my $makecmd = set_test_option("MAKE_CMD", $i);
+
+    $outputdir = set_test_option("OUTPUT_DIR", $i);
+    $builddir = set_test_option("BUILD_DIR", $i);
+
+    chdir $builddir || die "can't change directory to $builddir";
+
+    if (!-d $outputdir) {
+	mkpath($outputdir) or
+	    die "can't create $outputdir";
+    }
+
+    $make = "$makecmd O=$outputdir";
+
+    # Load all the options into their mapped variable names
+    foreach my $opt (keys %option_map) {
+	${$option_map{$opt}} = set_test_option($opt, $i);
+    }
+
+    $start_minconfig_defined = 1;
+
+    # The first test may override the PRE_KTEST option
+    if (defined($pre_ktest) && $i == 1) {
+	doprint "\n";
+	run_command $pre_ktest;
+    }
+
+    # Any test can override the POST_KTEST option
+    # The last test takes precedence.
+    if (defined($post_ktest)) {
+	$final_post_ktest = $post_ktest;
+    }
+
+    if (!defined($start_minconfig)) {
+	$start_minconfig_defined = 0;
+	$start_minconfig = $minconfig;
+    }
+
+    if (!-d $tmpdir) {
+	mkpath($tmpdir) or
+	    die "can't create $tmpdir";
+    }
+
+    $ENV{"SSH_USER"} = $ssh_user;
+    $ENV{"MACHINE"} = $machine;
+
+    $buildlog = "$tmpdir/buildlog-$machine";
+    $testlog = "$tmpdir/testlog-$machine";
+    $dmesg = "$tmpdir/dmesg-$machine";
+    $output_config = "$outputdir/.config";
+
+    if (!$buildonly) {
+	$target = "$ssh_user\@$machine";
+	if ($reboot_type eq "grub") {
+	    dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+	} elsif ($reboot_type eq "grub2") {
+	    dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+	    dodie "GRUB_FILE not defined" if (!defined($grub_file));
+	} elsif ($reboot_type eq "syslinux") {
+	    dodie "SYSLINUX_LABEL not defined" if (!defined($syslinux_label));
+	}
+    }
+
+    my $run_type = $build_type;
+    if ($test_type eq "patchcheck") {
+	$run_type = $patchcheck_type;
+    } elsif ($test_type eq "bisect") {
+	$run_type = $bisect_type;
+    } elsif ($test_type eq "config_bisect") {
+	$run_type = $config_bisect_type;
+    } elsif ($test_type eq "make_min_config") {
+	$run_type = "";
+    } elsif ($test_type eq "make_warnings_file") {
+	$run_type = "";
+    }
+
+    # mistake in config file?
+    if (!defined($run_type)) {
+	$run_type = "ERROR";
+    }
+
+    my $installme = "";
+    $installme = " no_install" if ($no_install);
+
+    my $name = "";
+
+    if (defined($test_name)) {
+	$name = " ($test_name)";
+    }
+
+    doprint "\n\n";
+    doprint "RUNNING TEST $i of $opt{NUM_TESTS}$name with option $test_type $run_type$installme\n\n";
+
+    if (defined($pre_test)) {
+	run_command $pre_test;
+    }
+
+    unlink $dmesg;
+    unlink $buildlog;
+    unlink $testlog;
+
+    if (defined($addconfig)) {
+	my $min = $minconfig;
+	if (!defined($minconfig)) {
+	    $min = "";
+	}
+	run_command "cat $addconfig $min > $tmpdir/add_config" or
+	    dodie "Failed to create temp config";
+	$minconfig = "$tmpdir/add_config";
+    }
+
+    if (defined($checkout)) {
+	run_command "git checkout $checkout" or
+	    die "failed to checkout $checkout";
+    }
+
+    $no_reboot = 0;
+
+    # A test may opt to not reboot the box
+    if ($reboot_on_success) {
+	$reboot_success = 1;
+    }
+
+    if ($test_type eq "bisect") {
+	bisect $i;
+	next;
+    } elsif ($test_type eq "config_bisect") {
+	config_bisect $i;
+	next;
+    } elsif ($test_type eq "patchcheck") {
+	patchcheck $i;
+	next;
+    } elsif ($test_type eq "make_min_config") {
+	make_min_config $i;
+	next;
+    } elsif ($test_type eq "make_warnings_file") {
+	$no_reboot = 1;
+	make_warnings_file $i;
+	next;
+    }
+
+    if ($build_type ne "nobuild") {
+	build $build_type or next;
+	check_buildlog or next;
+    }
+
+    if ($test_type eq "install") {
+	get_version;
+	install;
+	success $i;
+	next;
+    }
+
+    if ($test_type ne "build") {
+	my $failed = 0;
+	start_monitor_and_install or $failed = 1;
+
+	if (!$failed && $test_type ne "boot" && defined($run_test)) {
+	    do_run_test or $failed = 1;
+	}
+	end_monitor;
+	if ($failed) {
+	    print_times;
+	    next;
+	}
+    }
+
+    print_times;
+
+    success $i;
+}
+
+if (defined($final_post_ktest)) {
+    run_command $final_post_ktest;
+}
+
+if ($opt{"POWEROFF_ON_SUCCESS"}) {
+    halt;
+} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) {
+    reboot_to_good;
+} elsif (defined($switch_to_good)) {
+    # still need to get to the good kernel
+    run_command $switch_to_good;
+}
+
+
+doprint "\n    $successes of $opt{NUM_TESTS} tests were successful\n\n";
+
+exit 0;
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
new file mode 100644
index 000000000..6c58cd8bb
--- /dev/null
+++ b/tools/testing/ktest/sample.conf
@@ -0,0 +1,1288 @@
+#
+# Config file for ktest.pl
+#
+# Note, all paths must be absolute
+#
+
+# Options set in the beginning of the file are considered to be
+# default options. These options can be overriden by test specific
+# options, with the following exceptions:
+#
+#  LOG_FILE
+#  CLEAR_LOG
+#  POWEROFF_ON_SUCCESS
+#  REBOOT_ON_SUCCESS
+#
+# Test specific options are set after the label:
+#
+# TEST_START
+#
+# The options after a TEST_START label are specific to that test.
+# Each TEST_START label will set up a new test. If you want to
+# perform a test more than once, you can add the ITERATE label
+# to it followed by the number of times you want that test
+# to iterate. If the ITERATE is left off, the test will only
+# be performed once.
+#
+# TEST_START ITERATE 10
+#
+# You can skip a test by adding SKIP (before or after the ITERATE
+# and number)
+#
+# TEST_START SKIP
+#
+# TEST_START SKIP ITERATE 10
+#
+# TEST_START ITERATE 10 SKIP
+#
+# The SKIP label causes the options and the test itself to be ignored.
+# This is useful to set up several different tests in one config file, and
+# only enabling the ones you want to use for a current test run.
+#
+# You can add default options anywhere in the file as well
+# with the DEFAULTS tag. This allows you to have default options
+# after the test options to keep the test options at the top
+# of the file. You can even place the DEFAULTS tag between
+# test cases (but not in the middle of a single test case)
+#
+# TEST_START
+# MIN_CONFIG = /home/test/config-test1
+#
+# DEFAULTS
+# MIN_CONFIG = /home/test/config-default
+#
+# TEST_START ITERATE 10
+#
+# The above will run the first test with MIN_CONFIG set to
+# /home/test/config-test-1. Then 10 tests will be executed
+# with MIN_CONFIG with /home/test/config-default.
+#
+# You can also disable defaults with the SKIP option
+#
+# DEFAULTS SKIP
+# MIN_CONFIG = /home/test/config-use-sometimes
+#
+# DEFAULTS
+# MIN_CONFIG = /home/test/config-most-times
+#
+# The above will ignore the first MIN_CONFIG. If you want to
+# use the first MIN_CONFIG, remove the SKIP from the first
+# DEFAULTS tag and add it to the second. Be careful, options
+# may only be declared once per test or default. If you have
+# the same option name under the same test or as default
+# ktest will fail to execute, and no tests will run.
+#
+# DEFAULTS OVERRIDE
+#
+# Options defined in the DEFAULTS section can not be duplicated
+# even if they are defined in two different DEFAULT sections.
+# This is done to catch mistakes where an option is added but
+# the previous option was forgotten about and not commented.
+#
+# The OVERRIDE keyword can be added to a section to allow this
+# section to override other DEFAULT sections values that have
+# been defined previously. It will only override options that
+# have been defined before its use. Options defined later
+# in a non override section will still error. The same option
+# can not be defined in the same section even if that section
+# is marked OVERRIDE.
+#
+#
+#
+# Both TEST_START and DEFAULTS sections can also have the IF keyword
+# The value after the IF must evaluate into a 0 or non 0 positive
+# integer, and can use the config variables (explained below).
+#
+# DEFAULTS IF ${IS_X86_32}
+#
+# The above will process the DEFAULTS section if the config
+# variable IS_X86_32 evaluates to a non zero positive integer
+# otherwise if it evaluates to zero, it will act the same
+# as if the SKIP keyword was used.
+#
+# The ELSE keyword can be used directly after a section with
+# a IF statement.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE
+#
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal
+#
+#
+# The ELSE keyword can also contain an IF statement to allow multiple
+# if then else sections. But all the sections must be either
+# DEFAULT or TEST_START, they can not be a mixture.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE IF ${RUN_DISK_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests
+#
+# ELSE IF ${RUN_CPU_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu
+#
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# The if statement may also have comparisons that will and for
+# == and !=, strings may be used for both sides.
+#
+# BOX_TYPE := x86_32
+#
+# DEFAULTS IF ${BOX_TYPE} == x86_32
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64
+#
+# The DEFINED keyword can be used by the IF statements too.
+# It returns true if the given config variable or option has been defined
+# or false otherwise.
+#
+# 
+# DEFAULTS IF DEFINED USE_CC
+# CC := ${USE_CC}
+# ELSE
+# CC := gcc
+#
+#
+# As well as NOT DEFINED.
+#
+# DEFAULTS IF NOT DEFINED MAKE_CMD
+# MAKE_CMD := make ARCH=x86
+#
+#
+# And/or ops (&&,||) may also be used to make complex conditionals.
+#
+# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
+#
+# Notice the use of parentheses. Without any parentheses the above would be
+# processed the same as:
+#
+# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
+#
+#
+#
+# INCLUDE file
+#
+# The INCLUDE keyword may be used in DEFAULT sections. This will
+# read another config file and process that file as well. The included
+# file can include other files, add new test cases or default
+# statements. Config variables will be passed to these files and changes
+# to config variables will be seen by top level config files. Including
+# a file is processed just like the contents of the file was cut and pasted
+# into the top level file, except, that include files that end with
+# TEST_START sections will have that section ended at the end of
+# the include file. That is, an included file is included followed
+# by another DEFAULT keyword.
+#
+# Unlike other files referenced in this config, the file path does not need
+# to be absolute. If the file does not start with '/', then the directory
+# that the current config file was located in is used. If no config by the
+# given name is found there, then the current directory is searched.
+#
+# INCLUDE myfile
+# DEFAULT
+#
+# is the same as:
+#
+# INCLUDE myfile
+#
+# Note, if the include file does not contain a full path, the file is
+# searched first by the location of the original include file, and then
+# by the location that ktest.pl was executed in.
+#
+
+#### Config variables ####
+#
+# This config file can also contain "config variables".
+# These are assigned with ":=" instead of the ktest option
+# assigment "=".
+#
+# The difference between ktest options and config variables
+# is that config variables can be used multiple times,
+# where each instance will override the previous instance.
+# And that they only live at time of processing this config.
+#
+# The advantage to config variables are that they can be used
+# by any option or any other config variables to define thing
+# that you may use over and over again in the options.
+#
+# For example:
+#
+# USER      := root
+# TARGET    := mybox
+# TEST_CASE := ssh ${USER}@${TARGET} /path/to/my/test
+#
+# TEST_START
+# MIN_CONFIG = config1
+# TEST = ${TEST_CASE}
+#
+# TEST_START
+# MIN_CONFIG = config2
+# TEST = ${TEST_CASE}
+#
+# TEST_CASE := ssh ${USER}@${TARGET} /path/to/my/test2
+#
+# TEST_START
+# MIN_CONFIG = config1
+# TEST = ${TEST_CASE}
+#
+# TEST_START
+# MIN_CONFIG = config2
+# TEST = ${TEST_CASE}
+#
+# TEST_DIR := /home/me/test
+#
+# BUILD_DIR = ${TEST_DIR}/linux.git
+# OUTPUT_DIR = ${TEST_DIR}/test
+#
+# Note, the config variables are evaluated immediately, thus
+# updating TARGET after TEST_CASE has been assigned does nothing
+# to TEST_CASE.
+#
+# As shown in the example, to evaluate a config variable, you
+# use the ${X} convention. Simple $X will not work.
+#
+# If the config variable does not exist, the ${X} will not
+# be evaluated. Thus:
+#
+# MAKE_CMD = PATH=/mypath:${PATH} make
+#
+# If PATH is not a config variable, then the ${PATH} in
+# the MAKE_CMD option will be evaluated by the shell when
+# the MAKE_CMD option is passed into shell processing.
+
+#### Using options in other options ####
+#
+# Options that are defined in the config file may also be used
+# by other options. All options are evaulated at time of
+# use (except that config variables are evaluated at config
+# processing time).
+#
+# If an ktest option is used within another option, instead of
+# typing it again in that option you can simply use the option
+# just like you can config variables.
+#
+# MACHINE = mybox
+#
+# TEST = ssh root@${MACHINE} /path/to/test
+#
+# The option will be used per test case. Thus:
+#
+# TEST_TYPE = test
+# TEST = ssh root@{MACHINE}
+#
+# TEST_START
+# MACHINE = box1
+#
+# TEST_START
+# MACHINE = box2
+#
+# For both test cases, MACHINE will be evaluated at the time
+# of the test case. The first test will run ssh root@box1
+# and the second will run ssh root@box2.
+
+#### Mandatory Default Options ####
+
+# These options must be in the default section, although most
+# may be overridden by test options.
+
+# The machine hostname that you will test
+#MACHINE = target
+
+# The box is expected to have ssh on normal bootup, provide the user
+#  (most likely root, since you need privileged operations)
+#SSH_USER = root
+
+# The directory that contains the Linux source code
+#BUILD_DIR = /home/test/linux.git
+
+# The directory that the objects will be built
+# (can not be same as BUILD_DIR)
+#OUTPUT_DIR = /home/test/build/target
+
+# The location of the compiled file to copy to the target
+# (relative to OUTPUT_DIR)
+#BUILD_TARGET = arch/x86/boot/bzImage
+
+# The place to put your image on the test machine
+#TARGET_IMAGE = /boot/vmlinuz-test
+
+# A script or command to reboot the box
+#
+# Here is a digital loggers power switch example
+#POWER_CYCLE = wget --no-proxy -O /dev/null -q  --auth-no-challenge 'http://admin:admin@power/outlet?5=CCL'
+#
+# Here is an example to reboot a virtual box on the current host
+# with the name "Guest".
+#POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+
+# The script or command that reads the console
+#
+#  If you use ttywatch server, something like the following would work.
+#CONSOLE = nc -d localhost 3001
+#
+# For a virtual machine with guest name "Guest".
+#CONSOLE =  virsh console Guest
+
+# Signal to send to kill console.
+# ktest.pl will create a child process to monitor the console.
+# When the console is finished, ktest will kill the child process
+# with this signal.
+# (default INT)
+#CLOSE_CONSOLE_SIGNAL = HUP
+
+# Required version ending to differentiate the test
+# from other linux builds on the system.
+#LOCALVERSION = -test
+
+# For REBOOT_TYPE = grub2, you must specify where the grub.cfg
+# file is. This is the file that is searched to find the menu
+# option to boot to with GRUB_REBOOT
+#GRUB_FILE = /boot/grub2/grub.cfg
+
+# The tool for REBOOT_TYPE = grub2 to set the next reboot kernel
+# to boot into (one shot mode).
+# (default grub2_reboot)
+#GRUB_REBOOT = grub2_reboot
+
+# The grub title name for the test kernel to boot
+# (Only mandatory if REBOOT_TYPE = grub or grub2)
+#
+# Note, ktest.pl will not update the grub menu.lst, you need to
+# manually add an option for the test. ktest.pl will search
+# the grub menu.lst for this option to find what kernel to
+# reboot into.
+#
+# For example, if in the /boot/grub/menu.lst the test kernel title has:
+# title Test Kernel
+# kernel vmlinuz-test
+#
+# For grub2, a search of top level "menuentry"s are done. No
+# submenu is searched. The menu is found by searching for the
+# contents of GRUB_MENU in the line that starts with "menuentry".
+# You may want to include the quotes around the option. For example:
+# for: menuentry 'Test Kernel'
+# do a: GRUB_MENU = 'Test Kernel'
+# For customizing, add your entry in /etc/grub.d/40_custom.
+#
+#GRUB_MENU = Test Kernel
+
+# For REBOOT_TYPE = syslinux, the name of the syslinux executable
+# (on the target) to use to set up the next reboot to boot the
+# test kernel.
+# (default extlinux)
+#SYSLINUX = syslinux
+
+# For REBOOT_TYPE = syslinux, the path that is passed to to the
+# syslinux command where syslinux is installed.
+# (default /boot/extlinux)
+#SYSLINUX_PATH = /boot/syslinux
+
+# For REBOOT_TYPE = syslinux, the syslinux label that references the
+# test kernel in the syslinux config file.
+# (default undefined)
+#SYSLINUX_LABEL = "test-kernel"
+
+# A script to reboot the target into the test kernel
+# This and SWITCH_TO_TEST are about the same, except
+# SWITCH_TO_TEST is run even for REBOOT_TYPE = grub.
+# This may be left undefined.
+# (default undefined)
+#REBOOT_SCRIPT =
+
+#### Optional Config Options (all have defaults) ####
+
+# Start a test setup. If you leave this off, all options
+# will be default and the test will run once.
+# This is a label and not really an option (it takes no value).
+# You can append ITERATE and a number after it to iterate the
+# test a number of times, or SKIP to ignore this test.
+#
+#TEST_START
+#TEST_START ITERATE 5
+#TEST_START SKIP
+
+# Have the following options as default again. Used after tests
+# have already been defined by TEST_START. Optionally, you can
+# just define all default options before the first TEST_START
+# and you do not need this option.
+#
+# This is a label and not really an option (it takes no value).
+# You can append SKIP to this label and the options within this
+# section will be ignored.
+#
+# DEFAULTS
+# DEFAULTS SKIP
+
+# If you want to execute some command before the first test runs
+# you can set this option. Note, it can be set as a default option
+# or an option in the first test case. All other test cases will
+# ignore it. If both the default and first test have this option
+# set, then the first test will take precedence.
+#
+# default (undefined)
+#PRE_KTEST = ${SSH} ~/set_up_test
+
+# If you want to execute some command after all the tests have
+# completed, you can set this option. Note, it can be set as a
+# default or any test case can override it. If multiple test cases
+# set this option, then the last test case that set it will take
+# precedence
+#
+# default (undefined)
+#POST_KTEST = ${SSH} ~/dismantle_test
+
+# The default test type (default test)
+# The test types may be:
+#   build   - only build the kernel, do nothing else
+#   install - build and install, but do nothing else (does not reboot)
+#   boot    - build, install, and boot the kernel
+#   test    - build, boot and if TEST is set, run the test script
+#          (If TEST is not set, it defaults back to boot)
+#   bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
+#   patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
+#TEST_TYPE = test
+
+# Test to run if there is a successful boot and TEST_TYPE is test.
+# Must exit with 0 on success and non zero on error
+# default (undefined)
+#TEST = ssh user@machine /root/run_test
+
+# The build type is any make config type or special command
+#  (default randconfig)
+#   nobuild - skip the clean and build step
+#   useconfig:/path/to/config - use the given config and run
+#              oldconfig on it.
+# This option is ignored if TEST_TYPE is patchcheck or bisect
+#BUILD_TYPE = randconfig
+
+# The make command (default make)
+# If you are building a 32bit x86 on a 64 bit host
+#MAKE_CMD = CC=i386-gcc AS=i386-as make ARCH=i386
+
+# Any build options for the make of the kernel (not for other makes, like configs)
+# (default "")
+#BUILD_OPTIONS = -j20
+
+# If you need to do some special handling before installing
+# you can add a script with this option.
+# The environment variable KERNEL_VERSION will be set to the
+# kernel version that is used.
+#
+# default (undefined)
+#PRE_INSTALL = ssh user@target rm -rf '/lib/modules/*-test*'
+
+# If you need an initrd, you can add a script or code here to install
+# it. The environment variable KERNEL_VERSION will be set to the
+# kernel version that is used. Remember to add the initrd line
+# to your grub menu.lst file.
+#
+# Here's a couple of examples to use:
+#POST_INSTALL = ssh user@target /sbin/mkinitrd --allow-missing -f /boot/initramfs-test.img $KERNEL_VERSION
+#
+# or on some systems:
+#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+
+# If for some reason you just want to boot the kernel and you do not
+# want the test to install anything new. For example, you may just want
+# to boot test the same kernel over and over and do not want to go through
+# the hassle of installing anything, you can set this option to 1
+# (default 0)
+#NO_INSTALL = 1
+
+# If there is a command that you want to run before the individual test
+# case executes, then you can set this option
+#
+# default (undefined)
+#PRE_TEST = ${SSH} reboot_to_special_kernel
+
+# If there is a command you want to run after the individual test case
+# completes, then you can set this option.
+#
+# default (undefined)
+#POST_TEST = cd ${BUILD_DIR}; git reset --hard
+
+# If there is a script that you require to run before the build is done
+# you can specify it with PRE_BUILD.
+#
+# One example may be if you must add a temporary patch to the build to
+# fix a unrelated bug to perform a patchcheck test. This will apply the
+# patch before each build that is made. Use the POST_BUILD to do a git reset --hard
+# to remove the patch.
+#
+# (default undef)
+#PRE_BUILD = cd ${BUILD_DIR} && patch -p1 < /tmp/temp.patch
+
+# To specify if the test should fail if the PRE_BUILD fails,
+# PRE_BUILD_DIE needs to be set to 1. Otherwise the PRE_BUILD
+# result is ignored.
+# (default 0)
+# PRE_BUILD_DIE = 1
+
+# If there is a script that should run after the build is done
+# you can specify it with POST_BUILD.
+#
+# As the example in PRE_BUILD, POST_BUILD can be used to reset modifications
+# made by the PRE_BUILD.
+#
+# (default undef)
+#POST_BUILD = cd ${BUILD_DIR} && git reset --hard
+
+# To specify if the test should fail if the POST_BUILD fails,
+# POST_BUILD_DIE needs to be set to 1. Otherwise the POST_BUILD
+# result is ignored.
+# (default 0)
+#POST_BUILD_DIE = 1
+
+# Way to reboot the box to the test kernel.
+# Only valid options so far are "grub", "grub2", "syslinux" and "script"
+# (default grub)
+# If you specify grub, it will assume grub version 1
+# and will search in /boot/grub/menu.lst for the title $GRUB_MENU
+# and select that target to reboot to the kernel. If this is not
+# your setup, then specify "script" and have a command or script
+# specified in REBOOT_SCRIPT to boot to the target.
+#
+# For REBOOT_TYPE = grub2, you must define both GRUB_MENU and
+# GRUB_FILE.
+#
+# For REBOOT_TYPE = syslinux, you must define SYSLINUX_LABEL, and
+# perhaps modify SYSLINUX (default extlinux) and SYSLINUX_PATH
+# (default /boot/extlinux)
+#
+# The entry in /boot/grub/menu.lst must be entered in manually.
+# The test will not modify that file.
+#REBOOT_TYPE = grub
+
+# If you are using a machine that doesn't boot with grub, and
+# perhaps gets its kernel from a remote server (tftp), then
+# you can use this option to update the target image with the
+# test image.
+#
+# You could also do the same with POST_INSTALL, but the difference
+# between that option and this option is that POST_INSTALL runs
+# after the install, where this one runs just before a reboot.
+# (default undefined)
+#SWITCH_TO_TEST = cp ${OUTPUT_DIR}/${BUILD_TARGET} ${TARGET_IMAGE}
+
+# If you are using a machine that doesn't boot with grub, and
+# perhaps gets its kernel from a remote server (tftp), then
+# you can use this option to update the target image with the
+# the known good image to reboot safely back into.
+#
+# This option holds a command that will execute before needing
+# to reboot to a good known image.
+# (default undefined)
+#SWITCH_TO_GOOD = ssh ${SSH_USER}/${MACHINE} cp good_image ${TARGET_IMAGE}
+
+# The min config that is needed to build for the machine
+# A nice way to create this is with the following:
+#
+#   $ ssh target
+#   $ lsmod > mymods
+#   $ scp mymods host:/tmp
+#   $ exit
+#   $ cd linux.git
+#   $ rm .config
+#   $ make LSMOD=mymods localyesconfig
+#   $ grep '^CONFIG' .config > /home/test/config-min
+#
+# If you want even less configs:
+#
+#   log in directly to target (do not ssh)
+#
+#   $ su
+#   # lsmod | cut -d' ' -f1 | xargs rmmod
+#
+#   repeat the above several times
+#
+#   # lsmod > mymods
+#   # reboot
+#
+# May need to reboot to get your network back to copy the mymods
+# to the host, and then remove the previous .config and run the
+# localyesconfig again. The CONFIG_MIN generated like this will
+# not guarantee network activity to the box so the TEST_TYPE of
+# test may fail.
+#
+# You might also want to set:
+#   CONFIG_CMDLINE="<your options here>"
+#  randconfig may set the above and override your real command
+#  line options.
+# (default undefined)
+#MIN_CONFIG = /home/test/config-min
+
+# Sometimes there's options that just break the boot and
+# you do not care about. Here are a few:
+#   # CONFIG_STAGING is not set
+#  Staging drivers are horrible, and can break the build.
+#   # CONFIG_SCSI_DEBUG is not set
+#  SCSI_DEBUG may change your root partition
+#   # CONFIG_KGDB_SERIAL_CONSOLE is not set
+#  KGDB may cause oops waiting for a connection that's not there.
+# This option points to the file containing config options that will be prepended
+# to the MIN_CONFIG (or be the MIN_CONFIG if it is not set)
+#
+# Note, config options in MIN_CONFIG will override these options.
+#
+# (default undefined)
+#ADD_CONFIG = /home/test/config-broken
+
+# The location on the host where to write temp files
+# (default /tmp/ktest/${MACHINE})
+#TMP_DIR = /tmp/ktest/${MACHINE}
+
+# Optional log file to write the status (recommended)
+#  Note, this is a DEFAULT section only option.
+# (default undefined)
+#LOG_FILE = /home/test/logfiles/target.log
+
+# Remove old logfile if it exists before starting all tests.
+#  Note, this is a DEFAULT section only option.
+# (default 0)
+#CLEAR_LOG = 0
+
+# Line to define a successful boot up in console output.
+# This is what the line contains, not the entire line. If you need
+# the entire line to match, then use regural expression syntax like:
+#  (do not add any quotes around it)
+#
+#  SUCCESS_LINE = ^MyBox Login:$
+#
+# (default "login:")
+#SUCCESS_LINE = login:
+
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test after success is recommended.
+# (in seconds)
+# (default 10)
+#STOP_AFTER_SUCCESS = 10
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test after failure is recommended.
+# (in seconds)
+# (default 60)
+#STOP_AFTER_FAILURE = 60
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test if it never succeeds nor fails
+# is recommended.
+# Note: this is ignored if a success or failure is detected.
+# (in seconds)
+# (default 600, -1 is to never stop)
+#STOP_TEST_AFTER = 600
+
+# Stop testing if a build fails. If set, the script will end if
+# a failure is detected, otherwise it will save off the .config,
+# dmesg and bootlog in a directory called
+# MACHINE-TEST_TYPE_BUILD_TYPE-fail-yyyymmddhhmmss
+# if the STORE_FAILURES directory is set.
+# (default 1)
+# Note, even if this is set to zero, there are some errors that still
+# stop the tests.
+#DIE_ON_FAILURE = 1
+
+# Directory to store failure directories on failure. If this is not
+# set, DIE_ON_FAILURE=0 will not save off the .config, dmesg and
+# bootlog. This option is ignored if DIE_ON_FAILURE is not set.
+# (default undefined)
+#STORE_FAILURES = /home/test/failures
+
+# Directory to store success directories on success. If this is not
+# set, the .config, dmesg and bootlog will not be saved if a
+# test succeeds.
+# (default undefined)
+#STORE_SUCCESSES = /home/test/successes
+
+# Build without doing a make mrproper, or removing .config
+# (default 0)
+#BUILD_NOCLEAN = 0
+
+# As the test reads the console, after it hits the SUCCESS_LINE
+# the time it waits for the monitor to settle down between reads
+# can usually be lowered.
+# (in seconds) (default 1)
+#BOOTED_TIMEOUT = 1
+
+# The timeout in seconds when we consider the box hung after
+# the console stop producing output. Be sure to leave enough
+# time here to get pass a reboot. Some machines may not produce
+# any console output for a long time during a reboot. You do
+# not want the test to fail just because the system was in
+# the process of rebooting to the test kernel.
+# (default 120)
+#TIMEOUT = 120
+
+# In between tests, a reboot of the box may occur, and this
+# is the time to wait for the console after it stops producing
+# output. Some machines may not produce a large lag on reboot
+# so this should accommodate it.
+# The difference between this and TIMEOUT, is that TIMEOUT happens
+# when rebooting to the test kernel. This sleep time happens
+# after a test has completed and we are about to start running
+# another test. If a reboot to the reliable kernel happens,
+# we wait SLEEP_TIME for the console to stop producing output
+# before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
+# (default 60)
+#SLEEP_TIME = 60
+
+# The time in between bisects to sleep (in seconds)
+# (default 60)
+#BISECT_SLEEP_TIME = 60
+
+# The max wait time (in seconds) for waiting for the console to finish.
+# If for some reason, the console is outputting content without
+# ever finishing, this will cause ktest to get stuck. This
+# option is the max time ktest will wait for the monitor (console)
+# to settle down before continuing.
+# (default 1800)
+#MAX_MONITOR_WAIT
+
+# The time in between patch checks to sleep (in seconds)
+# (default 60)
+#PATCHCHECK_SLEEP_TIME = 60
+
+# Reboot the target box on error (default 0)
+#REBOOT_ON_ERROR = 0
+
+# Power off the target on error (ignored if REBOOT_ON_ERROR is set)
+#  Note, this is a DEFAULT section only option.
+# (default 0)
+#POWEROFF_ON_ERROR = 0
+
+# Power off the target after all tests have completed successfully
+#  Note, this is a DEFAULT section only option.
+# (default 0)
+#POWEROFF_ON_SUCCESS = 0
+
+# Reboot the target after all test completed successfully (default 1)
+# (ignored if POWEROFF_ON_SUCCESS is set)
+#REBOOT_ON_SUCCESS = 1
+
+# In case there are isses with rebooting, you can specify this
+# to always powercycle after this amount of time after calling
+# reboot.
+# Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
+# makes it powercycle immediately after rebooting. Do not define
+# it if you do not want it.
+# (default undefined)
+#POWERCYCLE_AFTER_REBOOT = 5
+
+# In case there's isses with halting, you can specify this
+# to always poweroff after this amount of time after calling
+# halt.
+# Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
+# makes it poweroff immediately after halting. Do not define
+# it if you do not want it.
+# (default undefined)
+#POWEROFF_AFTER_HALT = 20
+
+# A script or command to power off the box (default undefined)
+# Needed for POWEROFF_ON_ERROR and SUCCESS
+#
+# Example for digital loggers power switch:
+#POWER_OFF = wget --no-proxy -O /dev/null -q  --auth-no-challenge 'http://admin:admin@power/outlet?5=OFF'
+#
+# Example for a virtual guest call "Guest".
+#POWER_OFF = virsh destroy Guest
+
+# To have the build fail on "new" warnings, create a file that
+# contains a list of all known warnings (they must match exactly
+# to the line with 'warning:', 'error:' or 'Error:'. If the option
+# WARNINGS_FILE is set, then that file will be read, and if the
+# build detects a warning, it will examine this file and if the
+# warning does not exist in it, it will fail the build.
+#
+# Note, if this option is defined to a file that does not exist
+# then any warning will fail the build.
+#  (see make_warnings_file below)
+#
+# (optional, default undefined)
+#WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
+# The way to execute a command on the target
+# (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";)
+# The variables SSH_USER, MACHINE and SSH_COMMAND are defined
+#SSH_EXEC = ssh $SSH_USER@$MACHINE $SSH_COMMAND";
+
+# The way to copy a file to the target (install and modules)
+# (default scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE)
+# The variables SSH_USER, MACHINE are defined by the config
+# SRC_FILE and DST_FILE are ktest internal variables and
+# should only have '$' and not the '${}' notation.
+# (default scp $SRC_FILE ${SSH_USER}@${MACHINE}:$DST_FILE)
+#SCP_TO_TARGET = echo skip scp for $SRC_FILE $DST_FILE
+
+# If install needs to be different than modules, then this
+# option will override the SCP_TO_TARGET for installation.
+# (default ${SCP_TO_TARGET} )
+#SCP_TO_TARGET_INSTALL = scp $SRC_FILE tftp@tftpserver:$DST_FILE
+
+# The nice way to reboot the target
+# (default ssh $SSH_USER@$MACHINE reboot)
+# The variables SSH_USER and MACHINE are defined.
+#REBOOT = ssh $SSH_USER@$MACHINE reboot
+
+# The way triple faults are detected is by testing the kernel
+# banner. If the kernel banner for the kernel we are testing is
+# found, and then later a kernel banner for another kernel version
+# is found, it is considered that we encountered a triple fault,
+# and there is no panic or callback, but simply a reboot.
+# To disable this (because it did a false positive) set the following
+# to 0.
+# (default 1)
+#DETECT_TRIPLE_FAULT = 0
+
+# All options in the config file should be either used by ktest
+# or could be used within a value of another option. If an option
+# in the config file is not used, ktest will warn about it and ask
+# if you want to continue.
+#
+# If you don't care if there are non-used options, enable this
+# option. Be careful though, a non-used option is usually a sign
+# of an option name being typed incorrectly.
+# (default 0)
+#IGNORE_UNUSED = 1
+
+# When testing a kernel that happens to have WARNINGs, and call
+# traces, ktest.pl will detect these and fail a boot or test run
+# due to warnings. By setting this option, ktest will ignore
+# call traces, and will not fail a test if the kernel produces
+# an oops. Use this option with care.
+# (default 0)
+#IGNORE_ERRORS = 1
+
+#### Per test run options ####
+# The following options are only allowed in TEST_START sections.
+# They are ignored in the DEFAULTS sections.
+#
+# All of these are optional and undefined by default, although
+#  some of these options are required for TEST_TYPE of patchcheck
+#  and bisect.
+#
+#
+# CHECKOUT = branch
+#
+#  If the BUILD_DIR is a git repository, then you can set this option
+#  to checkout the given branch before running the TEST. If you
+#  specify this for the first run, that branch will be used for
+#  all preceding tests until a new CHECKOUT is set.
+#
+#
+# TEST_NAME = name
+#
+#  If you want the test to have a name that is displayed in
+#  the test result banner at the end of the test, then use this
+#  option. This is useful to search for the RESULT keyword and
+#  not have to translate a test number to a test in the config.
+#
+# For TEST_TYPE = patchcheck
+#
+#  This expects the BUILD_DIR to be a git repository, and
+#  will checkout the PATCHCHECK_START commit.
+#
+#  The option BUILD_TYPE will be ignored.
+#
+#  The MIN_CONFIG will be used for all builds of the patchcheck. The build type
+#  used for patchcheck is oldconfig.
+#
+#  PATCHCHECK_START is required and is the first patch to
+#   test (the SHA1 of the commit). You may also specify anything
+#   that git checkout allows (branch name, tage, HEAD~3).
+#
+#  PATCHCHECK_END is the last patch to check (default HEAD)
+#
+#  PATCHCHECK_CHERRY if set to non zero, then git cherry will be
+#      performed against PATCHCHECK_START and PATCHCHECK_END. That is
+#
+#      git cherry ${PATCHCHECK_START} ${PATCHCHECK_END}
+#
+#      Then the changes found will be tested.
+#
+#      Note, PATCHCHECK_CHERRY requires PATCHCHECK_END to be defined.
+#      (default 0)
+#
+#  PATCHCHECK_TYPE is required and is the type of test to run:
+#      build, boot, test.
+#
+#   Note, the build test will look for warnings, if a warning occurred
+#     in a file that a commit touches, the build will fail, unless
+#     IGNORE_WARNINGS is set for the given commit's sha1
+#
+#   IGNORE_WARNINGS can be used to disable the failure of patchcheck
+#     on a particuler commit (SHA1). You can add more than one commit
+#     by adding a list of SHA1s that are space delimited.
+#
+#   If BUILD_NOCLEAN is set, then make mrproper will not be run on
+#   any of the builds, just like all other TEST_TYPE tests. But
+#   what makes patchcheck different from the other tests, is if
+#   BUILD_NOCLEAN is not set, only the first and last patch run
+#   make mrproper. This helps speed up the test.
+#
+# Example:
+#   TEST_START
+#   TEST_TYPE = patchcheck
+#   CHECKOUT = mybranch
+#   PATCHCHECK_TYPE = boot
+#   PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7
+#   PATCHCHECK_END = HEAD~2
+#   IGNORE_WARNINGS = 42f9c6b69b54946ffc0515f57d01dc7f5c0e4712 0c17ca2c7187f431d8ffc79e81addc730f33d128
+#
+#
+#
+# For TEST_TYPE = bisect
+#
+#  You can specify a git bisect if the BUILD_DIR is a git repository.
+#  The MIN_CONFIG will be used for all builds of the bisect. The build type
+#  used for bisecting is oldconfig.
+#
+#  The option BUILD_TYPE will be ignored.
+#
+#  BISECT_TYPE is the type of test to perform:
+#	build	- bad fails to build
+#	boot	- bad builds but fails to boot
+#	test	- bad boots but fails a test
+#
+# BISECT_GOOD is the commit (SHA1) to label as good (accepts all git good commit types)
+# BISECT_BAD is the commit to label as bad (accepts all git bad commit types)
+#
+# The above three options are required for a bisect operation.
+#
+# BISECT_REPLAY = /path/to/replay/file (optional, default undefined)
+#
+#   If an operation failed in the bisect that was not expected to
+#   fail. Then the test ends. The state of the BUILD_DIR will be
+#   left off at where the failure occurred. You can examine the
+#   reason for the failure, and perhaps even find a git commit
+#   that would work to continue with. You can run:
+#
+#   git bisect log > /path/to/replay/file
+#
+#   The adding:
+#
+#    BISECT_REPLAY= /path/to/replay/file
+#
+#   And running the test again. The test will perform the initial
+#    git bisect start, git bisect good, and git bisect bad, and
+#    then it will run git bisect replay on this file, before
+#    continuing with the bisect.
+#
+# BISECT_START = commit (optional, default undefined)
+#
+#   As with BISECT_REPLAY, if the test failed on a commit that
+#   just happen to have a bad commit in the middle of the bisect,
+#   and you need to skip it. If BISECT_START is defined, it
+#   will checkout that commit after doing the initial git bisect start,
+#   git bisect good, git bisect bad, and running the git bisect replay
+#   if the BISECT_REPLAY is set.
+#
+# BISECT_SKIP = 1 (optional, default 0)
+#
+#   If BISECT_TYPE is set to test but the build fails, ktest will
+#   simply fail the test and end their. You could use BISECT_REPLAY
+#   and BISECT_START to resume after you found a new starting point,
+#   or you could set BISECT_SKIP to 1. If BISECT_SKIP is set to 1,
+#   when something other than the BISECT_TYPE fails, ktest.pl will
+#   run "git bisect skip" and try again.
+#
+# BISECT_FILES = <path> (optional, default undefined)
+#
+#   To just run the git bisect on a specific path, set BISECT_FILES.
+#   For example:
+#
+#     BISECT_FILES = arch/x86 kernel/time
+#
+#   Will run the bisect with "git bisect start -- arch/x86 kernel/time"
+#
+# BISECT_REVERSE = 1 (optional, default 0)
+#
+#   In those strange instances where it was broken forever
+#   and you are trying to find where it started to work!
+#   Set BISECT_GOOD to the commit that was last known to fail
+#   Set BISECT_BAD to the commit that is known to start working.
+#   With BISECT_REVERSE = 1, The test will consider failures as
+#   good, and success as bad.
+#
+# BISECT_MANUAL = 1 (optional, default 0)
+#
+#   In case there's a problem with automating the bisect for
+#   whatever reason. (Can't reboot, want to inspect each iteration)
+#   Doing a BISECT_MANUAL will have the test wait for you to
+#   tell it if the test passed or failed after each iteration.
+#   This is basicall the same as running git bisect yourself
+#   but ktest will rebuild and install the kernel for you.
+#
+# BISECT_CHECK = 1 (optional, default 0)
+#
+#   Just to be sure the good is good and bad is bad, setting
+#   BISECT_CHECK to 1 will start the bisect by first checking
+#   out BISECT_BAD and makes sure it fails, then it will check
+#   out BISECT_GOOD and makes sure it succeeds before starting
+#   the bisect (it works for BISECT_REVERSE too).
+#
+#   You can limit the test to just check BISECT_GOOD or
+#   BISECT_BAD with BISECT_CHECK = good or
+#   BISECT_CHECK = bad, respectively.
+#
+# BISECT_TRIES = 5 (optional, default 1)
+#
+#   For those cases that it takes several tries to hit a bug,
+#   the BISECT_TRIES is useful. It is the number of times the
+#   test is ran before it says the kernel is good. The first failure
+#   will stop trying and mark the current SHA1 as bad.
+#
+#   Note, as with all race bugs, there's no guarantee that if
+#   it succeeds, it is really a good bisect. But it helps in case
+#   the bug is some what reliable.
+#
+#   You can set BISECT_TRIES to zero, and all tests will be considered
+#   good, unless you also set BISECT_MANUAL.
+#
+# BISECT_RET_GOOD = 0 (optional, default undefined)
+#
+#   In case the specificed test returns something other than just
+#   0 for good, and non-zero for bad, you can override 0 being
+#   good by defining BISECT_RET_GOOD.
+#
+# BISECT_RET_BAD = 1 (optional, default undefined)
+#
+#   In case the specificed test returns something other than just
+#   0 for good, and non-zero for bad, you can override non-zero being
+#   bad by defining BISECT_RET_BAD.
+#
+# BISECT_RET_ABORT = 255 (optional, default undefined)
+#
+#   If you need to abort the bisect if the test discovers something
+#   that was wrong, you can define BISECT_RET_ABORT to be the error
+#   code returned by the test in order to abort the bisect.
+#
+# BISECT_RET_SKIP = 2 (optional, default undefined)
+#
+#   If the test detects that the current commit is neither good
+#   nor bad, but something else happened (another bug detected)
+#   you can specify BISECT_RET_SKIP to an error code that the
+#   test returns when it should skip the current commit.
+#
+# BISECT_RET_DEFAULT = good (optional, default undefined)
+#
+#   You can override the default of what to do when the above
+#   options are not hit. This may be one of, "good", "bad",
+#   "abort" or "skip" (without the quotes).
+#
+#   Note, if you do not define any of the previous BISECT_RET_*
+#   and define BISECT_RET_DEFAULT, all bisects results will do
+#   what the BISECT_RET_DEFAULT has.
+#
+#
+# Example:
+#   TEST_START
+#   TEST_TYPE = bisect
+#   BISECT_GOOD = v2.6.36
+#   BISECT_BAD = b5153163ed580e00c67bdfecb02b2e3843817b3e
+#   BISECT_TYPE = build
+#   MIN_CONFIG = /home/test/config-bisect
+#
+#
+#
+# For TEST_TYPE = config_bisect
+#
+#  In those cases that you have two different configs. One of them
+#  work, the other does not, and you do not know what config causes
+#  the problem.
+#  The TEST_TYPE config_bisect will bisect the bad config looking for
+#  what config causes the failure.
+#
+#  The way it works is this:
+#
+#   You can specify a good config with CONFIG_BISECT_GOOD, otherwise it
+#   will use the MIN_CONFIG, and if that's not specified, it will use
+#   the config that comes with "make defconfig".
+#
+#   It runs both the good and bad configs through a make oldconfig to
+#   make sure that they are set up for the kernel that is checked out.
+#
+#   It then reads the configs that are set, as well as the ones that are
+#   not set for both the good and bad configs, and then compares them.
+#   It will set half of the good configs within the bad config (note,
+#   "set" means to make the bad config match the good config, a config
+#   in the good config that is off, will be turned off in the bad
+#   config. That is considered a "set").
+#
+#   It tests this new config and if it works, it becomes the new good
+#   config, otherwise it becomes the new bad config. It continues this
+#   process until there's only one config left and it will report that
+#   config.
+#
+#   The "bad config" can also be a config that is needed to boot but was
+#   disabled because it depended on something that wasn't set.
+#
+#   During this process, it saves the current good and bad configs in
+#   ${TMP_DIR}/good_config and ${TMP_DIR}/bad_config respectively.
+#   If you stop the test, you can copy them to a new location to
+#   reuse them again.
+#
+#   Although the MIN_CONFIG may be the config it starts with, the
+#   MIN_CONFIG is ignored.
+#
+#  The option BUILD_TYPE will be ignored.
+#
+#  CONFIG_BISECT_TYPE is the type of test to perform:
+#	build	- bad fails to build
+#	boot	- bad builds but fails to boot
+#	test	- bad boots but fails a test
+#
+#  CONFIG_BISECT is the config that failed to boot
+#
+#  If BISECT_MANUAL is set, it will pause between iterations.
+#  This is useful to use just ktest.pl just for the config bisect.
+#  If you set it to build, it will run the bisect and you can
+#  control what happens in between iterations. It will ask you if
+#  the test succeeded or not and continue the config bisect.
+#
+# CONFIG_BISECT_GOOD (optional)
+#  If you have a good config to start with, then you
+#  can specify it with CONFIG_BISECT_GOOD. Otherwise
+#  the MIN_CONFIG is the base, if MIN_CONFIG is not set
+#  It will build a config with "make defconfig"
+#
+# CONFIG_BISECT_CHECK (optional)
+#  Set this to 1 if you want to confirm that the config ktest
+#  generates (the bad config with the min config) is still bad.
+#  It may be that the min config fixes what broke the bad config
+#  and the test will not return a result.
+#  Set it to "good" to test only the good config and set it
+#  to "bad" to only test the bad config.
+#
+# Example:
+#   TEST_START
+#   TEST_TYPE = config_bisect
+#   CONFIG_BISECT_TYPE = build
+#   CONFIG_BISECT = /home/test/config-bad
+#   MIN_CONFIG = /home/test/config-min
+#   BISECT_MANUAL = 1
+#
+#
+#
+# For TEST_TYPE = make_min_config
+#
+#  After doing a make localyesconfig, your kernel configuration may
+#  not be the most useful minimum configuration. Having a true minimum
+#  config that you can use against other configs is very useful if
+#  someone else has a config that breaks on your code. By only forcing
+#  those configurations that are truly required to boot your machine
+#  will give you less of a chance that one of your set configurations
+#  will make the bug go away. This will give you a better chance to
+#  be able to reproduce the reported bug matching the broken config.
+#
+#  Note, this does take some time, and may require you to run the
+#  test over night, or perhaps over the weekend. But it also allows
+#  you to interrupt it, and gives you the current minimum config
+#  that was found till that time.
+#
+#  Note, this test automatically assumes a BUILD_TYPE of oldconfig
+#  and its test type acts like boot.
+#  TODO: add a test version that makes the config do more than just
+#   boot, like having network access.
+#
+#  To save time, the test does not just grab any option and test
+#  it. The Kconfig files are examined to determine the dependencies
+#  of the configs. If a config is chosen that depends on another
+#  config, that config will be checked first. By checking the
+#  parents first, we can eliminate whole groups of configs that
+#  may have been enabled.
+#
+#  For example, if a USB device config is chosen and depends on CONFIG_USB,
+#  the CONFIG_USB will be tested before the device. If CONFIG_USB is
+#  found not to be needed, it, as well as all configs that depend on
+#  it, will be disabled and removed from the current min_config.
+#
+#  OUTPUT_MIN_CONFIG is the path and filename of the file that will
+#   be created from the MIN_CONFIG. If you interrupt the test, set
+#   this file as your new min config, and use it to continue the test.
+#   This file does not need to exist on start of test.
+#   This file is not created until a config is found that can be removed.
+#   If this file exists, you will be prompted if you want to use it
+#   as the min_config (overriding MIN_CONFIG) if START_MIN_CONFIG
+#   is not defined.
+#   (required field)
+#
+#  START_MIN_CONFIG is the config to use to start the test with.
+#   you can set this as the same OUTPUT_MIN_CONFIG, but if you do
+#   the OUTPUT_MIN_CONFIG file must exist.
+#   (default MIN_CONFIG)
+#
+#  IGNORE_CONFIG is used to specify a config file that has configs that
+#   you already know must be set. Configs are written here that have
+#   been tested and proved to be required. It is best to define this
+#   file if you intend on interrupting the test and running it where
+#   it left off. New configs that it finds will be written to this file
+#   and will not be tested again in later runs.
+#   (optional)
+#
+#  MIN_CONFIG_TYPE can be either 'boot' or 'test'. With 'boot' it will
+#   test if the created config can just boot the machine. If this is
+#   set to 'test', then the TEST option must be defined and the created
+#   config will not only boot the target, but also make sure that the
+#   config lets the test succeed. This is useful to make sure the final
+#   config that is generated allows network activity (ssh).
+#   (optional)
+#
+#  USE_OUTPUT_MIN_CONFIG set this to 1 if you do not want to be prompted
+#   about using the OUTPUT_MIN_CONFIG as the MIN_CONFIG as the starting
+#   point. Set it to 0 if you want to always just use the given MIN_CONFIG.
+#   If it is not defined, it will prompt you to pick which config
+#   to start with (MIN_CONFIG or OUTPUT_MIN_CONFIG).
+#
+# Example:
+#
+#  TEST_TYPE = make_min_config
+#  OUTPUT_MIN_CONFIG = /path/to/config-new-min
+#  START_MIN_CONFIG = /path/to/config-min
+#  IGNORE_CONFIG = /path/to/config-tested
+#  MIN_CONFIG_TYPE = test
+#  TEST = ssh ${USER}@${MACHINE} echo hi
+#
+#
+#
+#
+# For TEST_TYPE = make_warnings_file
+#
+# If you want the build to fail when a new warning is discovered
+# you set the WARNINGS_FILE to point to a file of known warnings.
+#
+# The test "make_warnings_file" will let you create a new warnings
+# file before you run other tests, like patchcheck.
+#
+# What this test does is to run just a build, you still need to
+# specify BUILD_TYPE to tell the test what type of config to use.
+# A BUILD_TYPE of nobuild will fail this test.
+#
+# The test will do the build and scan for all warnings. Any warning
+# it discovers will be saved in the WARNINGS_FILE (required) option.
+#
+# It is recommended (but not necessary) to make sure BUILD_NOCLEAN is
+# off, so that a full build is done (make mrproper is performed).
+# That way, all warnings will be captured.
+#
+# Example:
+#
+#  TEST_TYPE = make_warnings_file
+#  WARNINGS_FILE = ${OUTPUT_DIR}
+#  BUILD_TYPE = useconfig:oldconfig
+#  CHECKOUT = v3.8
+#  BUILD_NOCLEAN = 0
+#