summaryrefslogtreecommitdiff
path: root/Documentation/ABI
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/obsolete/sysfs-class-rfkill29
-rw-r--r--Documentation/ABI/obsolete/sysfs-gpio (renamed from Documentation/ABI/testing/sysfs-gpio)4
-rw-r--r--Documentation/ABI/removed/sysfs-class-rfkill13
-rw-r--r--Documentation/ABI/stable/firewire-cdev3
-rw-r--r--Documentation/ABI/stable/sysfs-bus-vmbus14
-rw-r--r--Documentation/ABI/stable/sysfs-class-rfkill27
-rw-r--r--Documentation/ABI/stable/sysfs-fs-orangefs87
-rw-r--r--Documentation/ABI/testing/gpio-cdev26
-rw-r--r--Documentation/ABI/testing/ima_policy1
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio10
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-health-afe440x54
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc584315
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-vf6109
-rw-r--r--Documentation/ABI/testing/sysfs-class-cxl10
-rw-r--r--Documentation/ABI/testing/sysfs-class-net-batman-adv17
-rw-r--r--Documentation/ABI/testing/sysfs-class-rc-nuvoton15
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu69
-rw-r--r--Documentation/ABI/testing/sysfs-driver-toshiba_acpi16
-rw-r--r--Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg100
-rw-r--r--Documentation/ABI/testing/sysfs-fs-f2fs14
-rw-r--r--Documentation/ABI/testing/sysfs-platform-hidma-mgmt97
-rw-r--r--Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl18
22 files changed, 608 insertions, 40 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill
deleted file mode 100644
index ff60ad9ec..000000000
--- a/Documentation/ABI/obsolete/sysfs-class-rfkill
+++ /dev/null
@@ -1,29 +0,0 @@
-rfkill - radio frequency (RF) connector kill switch support
-
-For details to this subsystem look at Documentation/rfkill.txt.
-
-What: /sys/class/rfkill/rfkill[0-9]+/state
-Date: 09-Jul-2007
-KernelVersion v2.6.22
-Contact: linux-wireless@vger.kernel.org
-Description: Current state of the transmitter.
- This file is deprecated and scheduled to be removed in 2014,
- because its not possible to express the 'soft and hard block'
- state of the rfkill driver.
-Values: A numeric value.
- 0: RFKILL_STATE_SOFT_BLOCKED
- transmitter is turned off by software
- 1: RFKILL_STATE_UNBLOCKED
- transmitter is (potentially) active
- 2: RFKILL_STATE_HARD_BLOCKED
- transmitter is forced off by something outside of
- the driver's control.
-
-What: /sys/class/rfkill/rfkill[0-9]+/claim
-Date: 09-Jul-2007
-KernelVersion v2.6.22
-Contact: linux-wireless@vger.kernel.org
-Description: This file is deprecated because there no longer is a way to
- claim just control over a single rfkill instance.
- This file is scheduled to be removed in 2012.
-Values: 0: Kernel handles events
diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio
index 55ffa2df1..867c1fab2 100644
--- a/Documentation/ABI/testing/sysfs-gpio
+++ b/Documentation/ABI/obsolete/sysfs-gpio
@@ -1,7 +1,7 @@
What: /sys/class/gpio/
Date: July 2008
KernelVersion: 2.6.27
-Contact: David Brownell <dbrownell@users.sourceforge.net>
+Contact: Linus Walleij <linusw@kernel.org>
Description:
As a Kconfig option, individual GPIO signals may be accessed from
@@ -26,3 +26,5 @@ Description:
/label ... (r/o) descriptive, not necessarily unique
/ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+ This ABI is deprecated and will be removed after 2020. It is
+ replaced with the GPIO character device.
diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill
new file mode 100644
index 000000000..3ce6231f2
--- /dev/null
+++ b/Documentation/ABI/removed/sysfs-class-rfkill
@@ -0,0 +1,13 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+What: /sys/class/rfkill/rfkill[0-9]+/claim
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: This file was deprecated because there no longer was a way to
+ claim just control over a single rfkill instance.
+ This file was scheduled to be removed in 2012, and was removed
+ in 2016.
+Values: 0: Kernel handles events
diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev
index 16d030827..f72ed6538 100644
--- a/Documentation/ABI/stable/firewire-cdev
+++ b/Documentation/ABI/stable/firewire-cdev
@@ -100,4 +100,5 @@ Description:
Users: libraw1394
libdc1394
- tools like jujuutils, fwhack, ...
+ libhinawa
+ tools like linux-firewire-utils, fwhack, ...
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus
index 636e938d5..5d0125f7b 100644
--- a/Documentation/ABI/stable/sysfs-bus-vmbus
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -27,3 +27,17 @@ Description: The mapping of which primary/sub channels are bound to which
Virtual Processors.
Format: <channel's child_relid:the bound cpu's number>
Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/device
+Date: Dec. 2015
+KernelVersion: 4.5
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The 16 bit device ID of the device
+Users: tools/hv/lsvmbus and user level RDMA libraries
+
+What: /sys/bus/vmbus/devices/vmbus_*/vendor
+Date: Dec. 2015
+KernelVersion: 4.5
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The 16 bit vendor ID of the device
+Users: tools/hv/lsvmbus and user level RDMA libraries
diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
index 097f522c3..e1ba4a104 100644
--- a/Documentation/ABI/stable/sysfs-class-rfkill
+++ b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -2,9 +2,8 @@ rfkill - radio frequency (RF) connector kill switch support
For details to this subsystem look at Documentation/rfkill.txt.
-For the deprecated /sys/class/rfkill/*/state and
-/sys/class/rfkill/*/claim knobs of this interface look in
-Documentation/ABI/obsolete/sysfs-class-rfkill.
+For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/removed/sysfs-class-rfkill.
What: /sys/class/rfkill
Date: 09-Jul-2007
@@ -42,6 +41,28 @@ Values: A numeric value.
1: true
+What: /sys/class/rfkill/rfkill[0-9]+/state
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Current state of the transmitter.
+ This file was scheduled to be removed in 2014, but due to its
+ large number of users it will be sticking around for a bit
+ longer. Despite it being marked as stabe, the newer "hard" and
+ "soft" interfaces should be preffered, since it is not possible
+ to express the 'soft and hard block' state of the rfkill driver
+ through this interface. There will likely be another attempt to
+ remove it in the future.
+Values: A numeric value.
+ 0: RFKILL_STATE_SOFT_BLOCKED
+ transmitter is turned off by software
+ 1: RFKILL_STATE_UNBLOCKED
+ transmitter is (potentially) active
+ 2: RFKILL_STATE_HARD_BLOCKED
+ transmitter is forced off by something outside of
+ the driver's control.
+
+
What: /sys/class/rfkill/rfkill[0-9]+/hard
Date: 12-March-2010
KernelVersion v2.6.34
diff --git a/Documentation/ABI/stable/sysfs-fs-orangefs b/Documentation/ABI/stable/sysfs-fs-orangefs
new file mode 100644
index 000000000..affdb114b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-fs-orangefs
@@ -0,0 +1,87 @@
+What: /sys/fs/orangefs/perf_counters/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Counters and settings for various caches.
+ Read only.
+
+
+What: /sys/fs/orangefs/perf_counter_reset
+Date: June 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ echo a 0 or a 1 into perf_counter_reset to
+ reset all the counters in
+ /sys/fs/orangefs/perf_counters
+ except ones with PINT_PERF_PRESERVE set.
+
+
+What: /sys/fs/orangefs/perf_time_interval_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Length of perf counter intervals in
+ seconds.
+
+
+What: /sys/fs/orangefs/perf_history_size
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ The perf_counters cache statistics have N, or
+ perf_history_size, samples. The default is
+ one.
+
+ Every perf_time_interval_secs the (first)
+ samples are reset.
+
+ If N is greater than one, the "current" set
+ of samples is reset, and the samples from the
+ other N-1 intervals remain available.
+
+
+What: /sys/fs/orangefs/op_timeout_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Service operation timeout in seconds.
+
+
+What: /sys/fs/orangefs/slot_timeout_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ "Slot" timeout in seconds. A "slot"
+ is an indexed buffer in the shared
+ memory segment used for communication
+ between the kernel module and userspace.
+ Slots are requested and waited for,
+ the wait times out after slot_timeout_secs.
+
+
+What: /sys/fs/orangefs/acache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Attribute cache configurable settings.
+
+
+What: /sys/fs/orangefs/ncache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Name cache configurable settings.
+
+
+What: /sys/fs/orangefs/capcache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Capability cache configurable settings.
+
+
+What: /sys/fs/orangefs/ccache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Credential cache configurable settings.
diff --git a/Documentation/ABI/testing/gpio-cdev b/Documentation/ABI/testing/gpio-cdev
new file mode 100644
index 000000000..7b265fbb4
--- /dev/null
+++ b/Documentation/ABI/testing/gpio-cdev
@@ -0,0 +1,26 @@
+What: /dev/gpiochip[0-9]+
+Date: November 2015
+KernelVersion: 4.4
+Contact: linux-gpio@vger.kernel.org
+Description:
+ The character device files /dev/gpiochip* are the interface
+ between GPIO chips and userspace.
+
+ The ioctl(2)-based ABI is defined and documented in
+ [include/uapi]<linux/gpio.h>.
+
+ The following file operations are supported:
+
+ open(2)
+ Currently the only useful flags are O_RDWR.
+
+ ioctl(2)
+ Initiate various actions.
+ See the inline documentation in [include/uapi]<linux/gpio.h>
+ for descriptions of all ioctls.
+
+ close(2)
+ Stops and free up the I/O contexts that was associated
+ with the file descriptor.
+
+Users: TBD
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
index 0a378a882..bb0f9a135 100644
--- a/Documentation/ABI/testing/ima_policy
+++ b/Documentation/ABI/testing/ima_policy
@@ -27,6 +27,7 @@ Description:
base: func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
[FIRMWARE_CHECK]
+ [KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
[[^]MAY_EXEC]
fsmagic:= hex value
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 0439c2aaf..3c6624881 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -496,8 +496,11 @@ Description:
1kohm_to_gnd: connected to ground via an 1kOhm resistor,
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
+ 90kohm_to_gnd: connected to ground via a 90kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+ 125kohm_to_gnd: connected to ground via an 125kOhm resistor,
500kohm_to_gnd: connected to ground via a 500kOhm resistor,
+ 640kohm_to_gnd: connected to ground via a 640kOhm resistor,
three_state: left floating.
For a list of available output power down options read
outX_powerdown_mode_available. If Y is not present the
@@ -1491,3 +1494,10 @@ Description:
This ABI is especially applicable for humidity sensors
to heatup the device and get rid of any condensation
in some humidity environment
+
+What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw
+KernelVersion: 4.5
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled no offset etc.) pH reading of a substance as a negative
+ base-10 logarithm of hydrodium ions in a litre of water.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
new file mode 100644
index 000000000..3740f253d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
@@ -0,0 +1,54 @@
+What: /sys/bus/iio/devices/iio:deviceX/tia_resistanceY
+ /sys/bus/iio/devices/iio:deviceX/tia_capacitanceY
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@ti.com>
+Description:
+ Get and set the resistance and the capacitance settings for the
+ Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for
+ Rf2 and Cf2 values.
+
+What: /sys/bus/iio/devices/iio:deviceX/tia_separate_en
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@ti.com>
+Description:
+ Enable or disable separate settings for the TransImpedance
+ Amplifier above, when disabled both values are set by the
+ first channel.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_raw
+ /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@ti.com>
+Description:
+ Get measured values from the ADC for these stages. Y is the
+ specific LED number. The values are expressed in 24-bit twos
+ complement.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@ti.com>
+Description:
+ Get differential values from the ADC for these stages. Y is the
+ specific LED number. The values are expressed in 24-bit twos
+ complement for the specified LEDs.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_offset
+ /sys/bus/iio/devices/iio:deviceX/out_current_ledY_ambient_offset
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@ti.com>
+Description:
+ Get and set the offset cancellation DAC setting for these
+ stages. The values are expressed in 5-bit sign-magnitude.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw
+Date: December 2015
+KernelVersion:
+Contact: Andrew F. Davis <afd@ti.com>
+Description:
+ Get and set the LED current for the specified LED. Y is the
+ specific LED number.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 b/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843
new file mode 100644
index 000000000..6275e9f56
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843
@@ -0,0 +1,15 @@
+What: /sys/bus/iio/devices/iio:deviceX/meas_conf
+What: /sys/bus/iio/devices/iio:deviceX/meas_conf_available
+KernelVersion: 4.5
+Contact: linux-iio@vger.kernel.org
+Description:
+ Current configuration and available configurations
+ for the bias current.
+ normal - Normal measurement configurations (default)
+ positivebias - Positive bias configuration
+ negativebias - Negative bias configuration
+ disabled - Only available on HMC5983. Disables magnetic
+ sensor and enables temperature sensor.
+ Note: The effect of this configuration may vary
+ according to the device. For exact documentation
+ check the device's datasheet.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610
index ecbc1f4af..308a6756d 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -5,3 +5,12 @@ Description:
Specifies the hardware conversion mode used. The three
available modes are "normal", "high-speed" and "low-power",
where the last is the default mode.
+
+
+What: /sys/bus/iio/devices/iio:deviceX/out_conversion_mode
+KernelVersion: 4.6
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the hardware conversion mode used within DAC.
+ The two available modes are "high-power" and "low-power",
+ where "low-power" mode is the default mode.
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index b07e86d45..7fd737eed 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -159,7 +159,7 @@ Description: read only
Decimal value of the Per Process MMIO space length.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<afu>m/pp_mmio_off
+What: /sys/class/cxl/<afu>m/pp_mmio_off (not in a guest)
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
@@ -183,7 +183,7 @@ Description: read only
Identifies the revision level of the PSL.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<card>/base_image
+What: /sys/class/cxl/<card>/base_image (not in a guest)
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
@@ -193,7 +193,7 @@ Description: read only
during the initial program load.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<card>/image_loaded
+What: /sys/class/cxl/<card>/image_loaded (not in a guest)
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
@@ -201,7 +201,7 @@ Description: read only
onto the card.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<card>/load_image_on_perst
+What: /sys/class/cxl/<card>/load_image_on_perst (not in a guest)
Date: December 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read/write
@@ -224,7 +224,7 @@ Description: write only
to reload the FPGA depending on load_image_on_perst.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<card>/perst_reloads_same_image
+What: /sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)
Date: July 2015
Contact: linuxppc-dev@lists.ozlabs.org
Description: read/write
diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
index 7f34a95bb..518f6a1db 100644
--- a/Documentation/ABI/testing/sysfs-class-net-batman-adv
+++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -1,4 +1,20 @@
+What: /sys/class/net/<iface>/batman-adv/throughput_override
+Date: Feb 2014
+Contact: Antonio Quartulli <antonio@meshcoding.com>
+description:
+ Defines the throughput value to be used by B.A.T.M.A.N. V
+ when estimating the link throughput using this interface.
+ If the value is set to 0 then batman-adv will try to
+ estimate the throughput by itself.
+
+What: /sys/class/net/<iface>/batman-adv/elp_interval
+Date: Feb 2014
+Contact: Linus Lüssing <linus.luessing@web.de>
+Description:
+ Defines the interval in milliseconds in which batman
+ sends its probing packets for link quality measurements.
+
What: /sys/class/net/<iface>/batman-adv/iface_status
Date: May 2010
Contact: Marek Lindner <mareklindner@neomailbox.ch>
@@ -12,4 +28,3 @@ Description:
The /sys/class/net/<iface>/batman-adv/mesh_iface file
displays the batman mesh interface this <iface>
currently is associated with.
-
diff --git a/Documentation/ABI/testing/sysfs-class-rc-nuvoton b/Documentation/ABI/testing/sysfs-class-rc-nuvoton
new file mode 100644
index 000000000..905bcdeed
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-rc-nuvoton
@@ -0,0 +1,15 @@
+What: /sys/class/rc/rcN/wakeup_data
+Date: Mar 2016
+KernelVersion: 4.6
+Contact: Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+ Reading this file returns the stored CIR wakeup sequence.
+ It starts with a pulse, followed by a space, pulse etc.
+ All values are in microseconds.
+ The same format can be used to store a wakeup sequence
+ in the Nuvoton chip by writing to this file.
+
+ Note: Some systems reset the stored wakeup sequence to a
+ factory default on each boot. On such systems store the
+ wakeup sequence in a file and set it on boot using e.g.
+ a udev rule.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index b683e8ee6..16501334b 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -271,3 +271,72 @@ Description: Parameters for the CPU cache attributes
- WriteBack: data is written only to the cache line and
the modified cache line is written to main
memory only when it is replaced
+
+What: /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats
+ /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/turbo_stat
+ /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/sub_turbo_stat
+ /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/unthrottle
+ /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/powercap
+ /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overtemp
+ /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/supply_fault
+ /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overcurrent
+ /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset
+Date: March 2016
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+ Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description: POWERNV CPUFreq driver's frequency throttle stats directory and
+ attributes
+
+ 'cpuX/cpufreq/throttle_stats' directory contains the CPU frequency
+ throttle stat attributes for the chip. The throttle stats of a cpu
+ is common across all the cpus belonging to a chip. Below are the
+ throttle attributes exported in the 'throttle_stats' directory:
+
+ - turbo_stat : This file gives the total number of times the max
+ frequency is throttled to lower frequency in turbo (at and above
+ nominal frequency) range of frequencies.
+
+ - sub_turbo_stat : This file gives the total number of times the
+ max frequency is throttled to lower frequency in sub-turbo(below
+ nominal frequency) range of frequencies.
+
+ - unthrottle : This file gives the total number of times the max
+ frequency is unthrottled after being throttled.
+
+ - powercap : This file gives the total number of times the max
+ frequency is throttled due to 'Power Capping'.
+
+ - overtemp : This file gives the total number of times the max
+ frequency is throttled due to 'CPU Over Temperature'.
+
+ - supply_fault : This file gives the total number of times the
+ max frequency is throttled due to 'Power Supply Failure'.
+
+ - overcurrent : This file gives the total number of times the
+ max frequency is throttled due to 'Overcurrent'.
+
+ - occ_reset : This file gives the total number of times the max
+ frequency is throttled due to 'OCC Reset'.
+
+ The sysfs attributes representing different throttle reasons like
+ powercap, overtemp, supply_fault, overcurrent and occ_reset map to
+ the reasons provided by OCC firmware for throttling the frequency.
+
+What: /sys/devices/system/cpu/cpufreq/policyX/throttle_stats
+ /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/turbo_stat
+ /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/sub_turbo_stat
+ /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/unthrottle
+ /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/powercap
+ /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overtemp
+ /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/supply_fault
+ /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overcurrent
+ /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset
+Date: March 2016
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+ Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description: POWERNV CPUFreq driver's frequency throttle stats directory and
+ attributes
+
+ 'policyX/throttle_stats' directory and all the attributes are same as
+ the /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory and
+ attributes which give the frequency throttle information of the chip.
diff --git a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
index eed922ef4..f34221b52 100644
--- a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
+++ b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
@@ -179,3 +179,19 @@ Description: This file controls the USB 3 functionality, valid values are:
Note that toggling this value requires a reboot for changes to
take effect.
Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/cooling_method
+Date: 2016
+KernelVersion: 4.6
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the Cooling Method feature.
+ Reading this file prints two values, the first is the actual cooling method
+ and the second is the maximum cooling method supported.
+ When the maximum cooling method is ONE, valid values are:
+ * 0 -> Maximum Performance
+ * 1 -> Battery Optimized
+ When the maximum cooling method is TWO, valid values are:
+ * 0 -> Maximum Performance
+ * 1 -> Performance
+ * 2 -> Battery Optimized
+Users: KToshiba
diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
new file mode 100644
index 000000000..011dda4f8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
@@ -0,0 +1,100 @@
+What: /sys/firmware/qemu_fw_cfg/
+Date: August 2015
+Contact: Gabriel Somlo <somlo@cmu.edu>
+Description:
+ Several different architectures supported by QEMU (x86, arm,
+ sun4*, ppc/mac) are provisioned with a firmware configuration
+ (fw_cfg) device, originally intended as a way for the host to
+ provide configuration data to the guest firmware. Starting
+ with QEMU v2.4, arbitrary fw_cfg file entries may be specified
+ by the user on the command line, which makes fw_cfg additionally
+ useful as an out-of-band, asynchronous mechanism for providing
+ configuration data to the guest userspace.
+
+ The authoritative guest-side hardware interface documentation
+ to the fw_cfg device can be found in "docs/specs/fw_cfg.txt"
+ in the QEMU source tree.
+
+ === SysFS fw_cfg Interface ===
+
+ The fw_cfg sysfs interface described in this document is only
+ intended to display discoverable blobs (i.e., those registered
+ with the file directory), as there is no way to determine the
+ presence or size of "legacy" blobs (with selector keys between
+ 0x0002 and 0x0018) programmatically.
+
+ All fw_cfg information is shown under:
+
+ /sys/firmware/qemu_fw_cfg/
+
+ The only legacy blob displayed is the fw_cfg device revision:
+
+ /sys/firmware/qemu_fw_cfg/rev
+
+ --- Discoverable fw_cfg blobs by selector key ---
+
+ All discoverable blobs listed in the fw_cfg file directory are
+ displayed as entries named after their unique selector key
+ value, e.g.:
+
+ /sys/firmware/qemu_fw_cfg/by_key/32
+ /sys/firmware/qemu_fw_cfg/by_key/33
+ /sys/firmware/qemu_fw_cfg/by_key/34
+ ...
+
+ Each such fw_cfg sysfs entry has the following values exported
+ as attributes:
+
+ name : The 56-byte nul-terminated ASCII string used as the
+ blob's 'file name' in the fw_cfg directory.
+ size : The length of the blob, as given in the fw_cfg
+ directory.
+ key : The value of the blob's selector key as given in the
+ fw_cfg directory. This value is the same as used in
+ the parent directory name.
+ raw : The raw bytes of the blob, obtained by selecting the
+ entry via the control register, and reading a number
+ of bytes equal to the blob size from the data
+ register.
+
+ --- Listing fw_cfg blobs by file name ---
+
+ While the fw_cfg device does not impose any specific naming
+ convention on the blobs registered in the file directory,
+ QEMU developers have traditionally used path name semantics
+ to give each blob a descriptive name. For example:
+
+ "bootorder"
+ "genroms/kvmvapic.bin"
+ "etc/e820"
+ "etc/boot-fail-wait"
+ "etc/system-states"
+ "etc/table-loader"
+ "etc/acpi/rsdp"
+ "etc/acpi/tables"
+ "etc/smbios/smbios-tables"
+ "etc/smbios/smbios-anchor"
+ ...
+
+ In addition to the listing by unique selector key described
+ above, the fw_cfg sysfs driver also attempts to build a tree
+ of directories matching the path name components of fw_cfg
+ blob names, ending in symlinks to the by_key entry for each
+ "basename", as illustrated below (assume current directory is
+ /sys/firmware):
+
+ qemu_fw_cfg/by_name/bootorder -> ../by_key/38
+ qemu_fw_cfg/by_name/etc/e820 -> ../../by_key/35
+ qemu_fw_cfg/by_name/etc/acpi/rsdp -> ../../../by_key/41
+ ...
+
+ Construction of the directory tree and symlinks is done on a
+ "best-effort" basis, as there is no guarantee that components
+ of fw_cfg blob names are always "well behaved". I.e., there is
+ the possibility that a symlink (basename) will conflict with
+ a dirname component of another fw_cfg blob, in which case the
+ creation of the offending /sys/firmware/qemu_fw_cfg/by_name
+ entry will be skipped.
+
+ The authoritative list of entries will continue to be found
+ under the /sys/firmware/qemu_fw_cfg/by_key directory.
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index e5200f354..a809f6005 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -98,3 +98,17 @@ Date: October 2015
Contact: "Chao Yu" <chao2.yu@samsung.com>
Description:
Controls the count of nid pages to be readaheaded.
+
+What: /sys/fs/f2fs/<disk>/dirty_nats_ratio
+Date: January 2016
+Contact: "Chao Yu" <chao2.yu@samsung.com>
+Description:
+ Controls dirty nat entries ratio threshold, if current
+ ratio exceeds configured threshold, checkpoint will
+ be triggered for flushing dirty nat entries.
+
+What: /sys/fs/f2fs/<disk>/lifetime_write_kbytes
+Date: January 2016
+Contact: "Shuoran Liu" <liushuoran@huawei.com>
+Description:
+ Shows total written kbytes issued to disk.
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
new file mode 100644
index 000000000..c2fb5d033
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
@@ -0,0 +1,97 @@
+What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
+ /sys/devices/platform/QCOM8060:*/chanops/chan*/priority
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains either 0 or 1 and indicates if the DMA channel is a
+ low priority (0) or high priority (1) channel.
+
+What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
+ /sys/devices/platform/QCOM8060:*/chanops/chan*/weight
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains 0..15 and indicates the weight of the channel among
+ equal priority channels during round robin scheduling.
+
+What: /sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
+ /sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the platform specific cycle value to wait after a
+ reset command is issued. If the value is chosen too short,
+ then the HW will issue a reset failure interrupt. The value
+ is platform specific and should not be changed without
+ consultance.
+
+What: /sys/devices/platform/hidma-mgmt*/dma_channels
+ /sys/devices/platform/QCOM8060:*/dma_channels
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the number of dma channels supported by one instance
+ of HIDMA hardware. The value may change from chip to chip.
+
+What: /sys/devices/platform/hidma-mgmt*/hw_version_major
+ /sys/devices/platform/QCOM8060:*/hw_version_major
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Version number major for the hardware.
+
+What: /sys/devices/platform/hidma-mgmt*/hw_version_minor
+ /sys/devices/platform/QCOM8060:*/hw_version_minor
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Version number minor for the hardware.
+
+What: /sys/devices/platform/hidma-mgmt*/max_rd_xactions
+ /sys/devices/platform/QCOM8060:*/max_rd_xactions
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains a value between 0 and 31. Maximum number of
+ read transactions that can be issued back to back.
+ Choosing a higher number gives better performance but
+ can also cause performance reduction to other peripherals
+ sharing the same bus.
+
+What: /sys/devices/platform/hidma-mgmt*/max_read_request
+ /sys/devices/platform/QCOM8060:*/max_read_request
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Size of each read request. The value needs to be a power
+ of two and can be between 128 and 1024.
+
+What: /sys/devices/platform/hidma-mgmt*/max_wr_xactions
+ /sys/devices/platform/QCOM8060:*/max_wr_xactions
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains a value between 0 and 31. Maximum number of
+ write transactions that can be issued back to back.
+ Choosing a higher number gives better performance but
+ can also cause performance reduction to other peripherals
+ sharing the same bus.
+
+
+What: /sys/devices/platform/hidma-mgmt*/max_write_request
+ /sys/devices/platform/QCOM8060:*/max_write_request
+Date: Nov 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Size of each write request. The value needs to be a power
+ of two and can be between 128 and 1024.
diff --git a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
new file mode 100644
index 000000000..3c3514815
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl
@@ -0,0 +1,18 @@
+What: /sys/devices/platform/<i2c-demux-name>/available_masters
+Date: January 2016
+KernelVersion: 4.6
+Contact: Wolfram Sang <wsa@the-dreams.de>
+Description:
+ Reading the file will give you a list of masters which can be
+ selected for a demultiplexed bus. The format is
+ "<index>:<name>". Example from a Renesas Lager board:
+
+ 0:/i2c@e6500000 1:/i2c@e6508000
+
+What: /sys/devices/platform/<i2c-demux-name>/current_master
+Date: January 2016
+KernelVersion: 4.6
+Contact: Wolfram Sang <wsa@the-dreams.de>
+Description:
+ This file selects/shows the active I2C master for a demultiplexed
+ bus. It uses the <index> value from the file 'available_masters'.