summaryrefslogtreecommitdiff
path: root/Documentation/cgroup-v2.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/cgroup-v2.txt')
-rw-r--r--Documentation/cgroup-v2.txt1386
1 files changed, 1386 insertions, 0 deletions
diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt
new file mode 100644
index 000000000..ff49cf901
--- /dev/null
+++ b/Documentation/cgroup-v2.txt
@@ -0,0 +1,1386 @@
+
+Control Group v2
+
+October, 2015 Tejun Heo <tj@kernel.org>
+
+This is the authoritative documentation on the design, interface and
+conventions of cgroup v2. It describes all userland-visible aspects
+of cgroup including core and specific controller behaviors. All
+future changes must be reflected in this document. Documentation for
+v1 is available under Documentation/cgroup-v1/.
+
+CONTENTS
+
+1. Introduction
+ 1-1. Terminology
+ 1-2. What is cgroup?
+2. Basic Operations
+ 2-1. Mounting
+ 2-2. Organizing Processes
+ 2-3. [Un]populated Notification
+ 2-4. Controlling Controllers
+ 2-4-1. Enabling and Disabling
+ 2-4-2. Top-down Constraint
+ 2-4-3. No Internal Process Constraint
+ 2-5. Delegation
+ 2-5-1. Model of Delegation
+ 2-5-2. Delegation Containment
+ 2-6. Guidelines
+ 2-6-1. Organize Once and Control
+ 2-6-2. Avoid Name Collisions
+3. Resource Distribution Models
+ 3-1. Weights
+ 3-2. Limits
+ 3-3. Protections
+ 3-4. Allocations
+4. Interface Files
+ 4-1. Format
+ 4-2. Conventions
+ 4-3. Core Interface Files
+5. Controllers
+ 5-1. CPU
+ 5-1-1. CPU Interface Files
+ 5-2. Memory
+ 5-2-1. Memory Interface Files
+ 5-2-2. Usage Guidelines
+ 5-2-3. Memory Ownership
+ 5-3. IO
+ 5-3-1. IO Interface Files
+ 5-3-2. Writeback
+P. Information on Kernel Programming
+ P-1. Filesystem Support for Writeback
+D. Deprecated v1 Core Features
+R. Issues with v1 and Rationales for v2
+ R-1. Multiple Hierarchies
+ R-2. Thread Granularity
+ R-3. Competition Between Inner Nodes and Threads
+ R-4. Other Interface Issues
+ R-5. Controller Issues and Remedies
+ R-5-1. Memory
+
+
+1. Introduction
+
+1-1. Terminology
+
+"cgroup" stands for "control group" and is never capitalized. The
+singular form is used to designate the whole feature and also as a
+qualifier as in "cgroup controllers". When explicitly referring to
+multiple individual control groups, the plural form "cgroups" is used.
+
+
+1-2. What is cgroup?
+
+cgroup is a mechanism to organize processes hierarchically and
+distribute system resources along the hierarchy in a controlled and
+configurable manner.
+
+cgroup is largely composed of two parts - the core and controllers.
+cgroup core is primarily responsible for hierarchically organizing
+processes. A cgroup controller is usually responsible for
+distributing a specific type of system resource along the hierarchy
+although there are utility controllers which serve purposes other than
+resource distribution.
+
+cgroups form a tree structure and every process in the system belongs
+to one and only one cgroup. All threads of a process belong to the
+same cgroup. On creation, all processes are put in the cgroup that
+the parent process belongs to at the time. A process can be migrated
+to another cgroup. Migration of a process doesn't affect already
+existing descendant processes.
+
+Following certain structural constraints, controllers may be enabled or
+disabled selectively on a cgroup. All controller behaviors are
+hierarchical - if a controller is enabled on a cgroup, it affects all
+processes which belong to the cgroups consisting the inclusive
+sub-hierarchy of the cgroup. When a controller is enabled on a nested
+cgroup, it always restricts the resource distribution further. The
+restrictions set closer to the root in the hierarchy can not be
+overridden from further away.
+
+
+2. Basic Operations
+
+2-1. Mounting
+
+Unlike v1, cgroup v2 has only single hierarchy. The cgroup v2
+hierarchy can be mounted with the following mount command.
+
+ # mount -t cgroup2 none $MOUNT_POINT
+
+cgroup2 filesystem has the magic number 0x63677270 ("cgrp"). All
+controllers which support v2 and are not bound to a v1 hierarchy are
+automatically bound to the v2 hierarchy and show up at the root.
+Controllers which are not in active use in the v2 hierarchy can be
+bound to other hierarchies. This allows mixing v2 hierarchy with the
+legacy v1 multiple hierarchies in a fully backward compatible way.
+
+A controller can be moved across hierarchies only after the controller
+is no longer referenced in its current hierarchy. Because per-cgroup
+controller states are destroyed asynchronously and controllers may
+have lingering references, a controller may not show up immediately on
+the v2 hierarchy after the final umount of the previous hierarchy.
+Similarly, a controller should be fully disabled to be moved out of
+the unified hierarchy and it may take some time for the disabled
+controller to become available for other hierarchies; furthermore, due
+to inter-controller dependencies, other controllers may need to be
+disabled too.
+
+While useful for development and manual configurations, moving
+controllers dynamically between the v2 and other hierarchies is
+strongly discouraged for production use. It is recommended to decide
+the hierarchies and controller associations before starting using the
+controllers after system boot.
+
+
+2-2. Organizing Processes
+
+Initially, only the root cgroup exists to which all processes belong.
+A child cgroup can be created by creating a sub-directory.
+
+ # mkdir $CGROUP_NAME
+
+A given cgroup may have multiple child cgroups forming a tree
+structure. Each cgroup has a read-writable interface file
+"cgroup.procs". When read, it lists the PIDs of all processes which
+belong to the cgroup one-per-line. The PIDs are not ordered and the
+same PID may show up more than once if the process got moved to
+another cgroup and then back or the PID got recycled while reading.
+
+A process can be migrated into a cgroup by writing its PID to the
+target cgroup's "cgroup.procs" file. Only one process can be migrated
+on a single write(2) call. If a process is composed of multiple
+threads, writing the PID of any thread migrates all threads of the
+process.
+
+When a process forks a child process, the new process is born into the
+cgroup that the forking process belongs to at the time of the
+operation. After exit, a process stays associated with the cgroup
+that it belonged to at the time of exit until it's reaped; however, a
+zombie process does not appear in "cgroup.procs" and thus can't be
+moved to another cgroup.
+
+A cgroup which doesn't have any children or live processes can be
+destroyed by removing the directory. Note that a cgroup which doesn't
+have any children and is associated only with zombie processes is
+considered empty and can be removed.
+
+ # rmdir $CGROUP_NAME
+
+"/proc/$PID/cgroup" lists a process's cgroup membership. If legacy
+cgroup is in use in the system, this file may contain multiple lines,
+one for each hierarchy. The entry for cgroup v2 is always in the
+format "0::$PATH".
+
+ # cat /proc/842/cgroup
+ ...
+ 0::/test-cgroup/test-cgroup-nested
+
+If the process becomes a zombie and the cgroup it was associated with
+is removed subsequently, " (deleted)" is appended to the path.
+
+ # cat /proc/842/cgroup
+ ...
+ 0::/test-cgroup/test-cgroup-nested (deleted)
+
+
+2-3. [Un]populated Notification
+
+Each non-root cgroup has a "cgroup.events" file which contains
+"populated" field indicating whether the cgroup's sub-hierarchy has
+live processes in it. Its value is 0 if there is no live process in
+the cgroup and its descendants; otherwise, 1. poll and [id]notify
+events are triggered when the value changes. This can be used, for
+example, to start a clean-up operation after all processes of a given
+sub-hierarchy have exited. The populated state updates and
+notifications are recursive. Consider the following sub-hierarchy
+where the numbers in the parentheses represent the numbers of processes
+in each cgroup.
+
+ A(4) - B(0) - C(1)
+ \ D(0)
+
+A, B and C's "populated" fields would be 1 while D's 0. After the one
+process in C exits, B and C's "populated" fields would flip to "0" and
+file modified events will be generated on the "cgroup.events" files of
+both cgroups.
+
+
+2-4. Controlling Controllers
+
+2-4-1. Enabling and Disabling
+
+Each cgroup has a "cgroup.controllers" file which lists all
+controllers available for the cgroup to enable.
+
+ # cat cgroup.controllers
+ cpu io memory
+
+No controller is enabled by default. Controllers can be enabled and
+disabled by writing to the "cgroup.subtree_control" file.
+
+ # echo "+cpu +memory -io" > cgroup.subtree_control
+
+Only controllers which are listed in "cgroup.controllers" can be
+enabled. When multiple operations are specified as above, either they
+all succeed or fail. If multiple operations on the same controller
+are specified, the last one is effective.
+
+Enabling a controller in a cgroup indicates that the distribution of
+the target resource across its immediate children will be controlled.
+Consider the following sub-hierarchy. The enabled controllers are
+listed in parentheses.
+
+ A(cpu,memory) - B(memory) - C()
+ \ D()
+
+As A has "cpu" and "memory" enabled, A will control the distribution
+of CPU cycles and memory to its children, in this case, B. As B has
+"memory" enabled but not "CPU", C and D will compete freely on CPU
+cycles but their division of memory available to B will be controlled.
+
+As a controller regulates the distribution of the target resource to
+the cgroup's children, enabling it creates the controller's interface
+files in the child cgroups. In the above example, enabling "cpu" on B
+would create the "cpu." prefixed controller interface files in C and
+D. Likewise, disabling "memory" from B would remove the "memory."
+prefixed controller interface files from C and D. This means that the
+controller interface files - anything which doesn't start with
+"cgroup." are owned by the parent rather than the cgroup itself.
+
+
+2-4-2. Top-down Constraint
+
+Resources are distributed top-down and a cgroup can further distribute
+a resource only if the resource has been distributed to it from the
+parent. This means that all non-root "cgroup.subtree_control" files
+can only contain controllers which are enabled in the parent's
+"cgroup.subtree_control" file. A controller can be enabled only if
+the parent has the controller enabled and a controller can't be
+disabled if one or more children have it enabled.
+
+
+2-4-3. No Internal Process Constraint
+
+Non-root cgroups can only distribute resources to their children when
+they don't have any processes of their own. In other words, only
+cgroups which don't contain any processes can have controllers enabled
+in their "cgroup.subtree_control" files.
+
+This guarantees that, when a controller is looking at the part of the
+hierarchy which has it enabled, processes are always only on the
+leaves. This rules out situations where child cgroups compete against
+internal processes of the parent.
+
+The root cgroup is exempt from this restriction. Root contains
+processes and anonymous resource consumption which can't be associated
+with any other cgroups and requires special treatment from most
+controllers. How resource consumption in the root cgroup is governed
+is up to each controller.
+
+Note that the restriction doesn't get in the way if there is no
+enabled controller in the cgroup's "cgroup.subtree_control". This is
+important as otherwise it wouldn't be possible to create children of a
+populated cgroup. To control resource distribution of a cgroup, the
+cgroup must create children and transfer all its processes to the
+children before enabling controllers in its "cgroup.subtree_control"
+file.
+
+
+2-5. Delegation
+
+2-5-1. Model of Delegation
+
+A cgroup can be delegated to a less privileged user by granting write
+access of the directory and its "cgroup.procs" file to the user. Note
+that resource control interface files in a given directory control the
+distribution of the parent's resources and thus must not be delegated
+along with the directory.
+
+Once delegated, the user can build sub-hierarchy under the directory,
+organize processes as it sees fit and further distribute the resources
+it received from the parent. The limits and other settings of all
+resource controllers are hierarchical and regardless of what happens
+in the delegated sub-hierarchy, nothing can escape the resource
+restrictions imposed by the parent.
+
+Currently, cgroup doesn't impose any restrictions on the number of
+cgroups in or nesting depth of a delegated sub-hierarchy; however,
+this may be limited explicitly in the future.
+
+
+2-5-2. Delegation Containment
+
+A delegated sub-hierarchy is contained in the sense that processes
+can't be moved into or out of the sub-hierarchy by the delegatee. For
+a process with a non-root euid to migrate a target process into a
+cgroup by writing its PID to the "cgroup.procs" file, the following
+conditions must be met.
+
+- The writer's euid must match either uid or suid of the target process.
+
+- The writer must have write access to the "cgroup.procs" file.
+
+- The writer must have write access to the "cgroup.procs" file of the
+ common ancestor of the source and destination cgroups.
+
+The above three constraints ensure that while a delegatee may migrate
+processes around freely in the delegated sub-hierarchy it can't pull
+in from or push out to outside the sub-hierarchy.
+
+For an example, let's assume cgroups C0 and C1 have been delegated to
+user U0 who created C00, C01 under C0 and C10 under C1 as follows and
+all processes under C0 and C1 belong to U0.
+
+ ~~~~~~~~~~~~~ - C0 - C00
+ ~ cgroup ~ \ C01
+ ~ hierarchy ~
+ ~~~~~~~~~~~~~ - C1 - C10
+
+Let's also say U0 wants to write the PID of a process which is
+currently in C10 into "C00/cgroup.procs". U0 has write access to the
+file and uid match on the process; however, the common ancestor of the
+source cgroup C10 and the destination cgroup C00 is above the points
+of delegation and U0 would not have write access to its "cgroup.procs"
+files and thus the write will be denied with -EACCES.
+
+
+2-6. Guidelines
+
+2-6-1. Organize Once and Control
+
+Migrating a process across cgroups is a relatively expensive operation
+and stateful resources such as memory are not moved together with the
+process. This is an explicit design decision as there often exist
+inherent trade-offs between migration and various hot paths in terms
+of synchronization cost.
+
+As such, migrating processes across cgroups frequently as a means to
+apply different resource restrictions is discouraged. A workload
+should be assigned to a cgroup according to the system's logical and
+resource structure once on start-up. Dynamic adjustments to resource
+distribution can be made by changing controller configuration through
+the interface files.
+
+
+2-6-2. Avoid Name Collisions
+
+Interface files for a cgroup and its children cgroups occupy the same
+directory and it is possible to create children cgroups which collide
+with interface files.
+
+All cgroup core interface files are prefixed with "cgroup." and each
+controller's interface files are prefixed with the controller name and
+a dot. A controller's name is composed of lower case alphabets and
+'_'s but never begins with an '_' so it can be used as the prefix
+character for collision avoidance. Also, interface file names won't
+start or end with terms which are often used in categorizing workloads
+such as job, service, slice, unit or workload.
+
+cgroup doesn't do anything to prevent name collisions and it's the
+user's responsibility to avoid them.
+
+
+3. Resource Distribution Models
+
+cgroup controllers implement several resource distribution schemes
+depending on the resource type and expected use cases. This section
+describes major schemes in use along with their expected behaviors.
+
+
+3-1. Weights
+
+A parent's resource is distributed by adding up the weights of all
+active children and giving each the fraction matching the ratio of its
+weight against the sum. As only children which can make use of the
+resource at the moment participate in the distribution, this is
+work-conserving. Due to the dynamic nature, this model is usually
+used for stateless resources.
+
+All weights are in the range [1, 10000] with the default at 100. This
+allows symmetric multiplicative biases in both directions at fine
+enough granularity while staying in the intuitive range.
+
+As long as the weight is in range, all configuration combinations are
+valid and there is no reason to reject configuration changes or
+process migrations.
+
+"cpu.weight" proportionally distributes CPU cycles to active children
+and is an example of this type.
+
+
+3-2. Limits
+
+A child can only consume upto the configured amount of the resource.
+Limits can be over-committed - the sum of the limits of children can
+exceed the amount of resource available to the parent.
+
+Limits are in the range [0, max] and defaults to "max", which is noop.
+
+As limits can be over-committed, all configuration combinations are
+valid and there is no reason to reject configuration changes or
+process migrations.
+
+"io.max" limits the maximum BPS and/or IOPS that a cgroup can consume
+on an IO device and is an example of this type.
+
+
+3-3. Protections
+
+A cgroup is protected to be allocated upto the configured amount of
+the resource if the usages of all its ancestors are under their
+protected levels. Protections can be hard guarantees or best effort
+soft boundaries. Protections can also be over-committed in which case
+only upto the amount available to the parent is protected among
+children.
+
+Protections are in the range [0, max] and defaults to 0, which is
+noop.
+
+As protections can be over-committed, all configuration combinations
+are valid and there is no reason to reject configuration changes or
+process migrations.
+
+"memory.low" implements best-effort memory protection and is an
+example of this type.
+
+
+3-4. Allocations
+
+A cgroup is exclusively allocated a certain amount of a finite
+resource. Allocations can't be over-committed - the sum of the
+allocations of children can not exceed the amount of resource
+available to the parent.
+
+Allocations are in the range [0, max] and defaults to 0, which is no
+resource.
+
+As allocations can't be over-committed, some configuration
+combinations are invalid and should be rejected. Also, if the
+resource is mandatory for execution of processes, process migrations
+may be rejected.
+
+"cpu.rt.max" hard-allocates realtime slices and is an example of this
+type.
+
+
+4. Interface Files
+
+4-1. Format
+
+All interface files should be in one of the following formats whenever
+possible.
+
+ New-line separated values
+ (when only one value can be written at once)
+
+ VAL0\n
+ VAL1\n
+ ...
+
+ Space separated values
+ (when read-only or multiple values can be written at once)
+
+ VAL0 VAL1 ...\n
+
+ Flat keyed
+
+ KEY0 VAL0\n
+ KEY1 VAL1\n
+ ...
+
+ Nested keyed
+
+ KEY0 SUB_KEY0=VAL00 SUB_KEY1=VAL01...
+ KEY1 SUB_KEY0=VAL10 SUB_KEY1=VAL11...
+ ...
+
+For a writable file, the format for writing should generally match
+reading; however, controllers may allow omitting later fields or
+implement restricted shortcuts for most common use cases.
+
+For both flat and nested keyed files, only the values for a single key
+can be written at a time. For nested keyed files, the sub key pairs
+may be specified in any order and not all pairs have to be specified.
+
+
+4-2. Conventions
+
+- Settings for a single feature should be contained in a single file.
+
+- The root cgroup should be exempt from resource control and thus
+ shouldn't have resource control interface files. Also,
+ informational files on the root cgroup which end up showing global
+ information available elsewhere shouldn't exist.
+
+- If a controller implements weight based resource distribution, its
+ interface file should be named "weight" and have the range [1,
+ 10000] with 100 as the default. The values are chosen to allow
+ enough and symmetric bias in both directions while keeping it
+ intuitive (the default is 100%).
+
+- If a controller implements an absolute resource guarantee and/or
+ limit, the interface files should be named "min" and "max"
+ respectively. If a controller implements best effort resource
+ guarantee and/or limit, the interface files should be named "low"
+ and "high" respectively.
+
+ In the above four control files, the special token "max" should be
+ used to represent upward infinity for both reading and writing.
+
+- If a setting has a configurable default value and keyed specific
+ overrides, the default entry should be keyed with "default" and
+ appear as the first entry in the file.
+
+ The default value can be updated by writing either "default $VAL" or
+ "$VAL".
+
+ When writing to update a specific override, "default" can be used as
+ the value to indicate removal of the override. Override entries
+ with "default" as the value must not appear when read.
+
+ For example, a setting which is keyed by major:minor device numbers
+ with integer values may look like the following.
+
+ # cat cgroup-example-interface-file
+ default 150
+ 8:0 300
+
+ The default value can be updated by
+
+ # echo 125 > cgroup-example-interface-file
+
+ or
+
+ # echo "default 125" > cgroup-example-interface-file
+
+ An override can be set by
+
+ # echo "8:16 170" > cgroup-example-interface-file
+
+ and cleared by
+
+ # echo "8:0 default" > cgroup-example-interface-file
+ # cat cgroup-example-interface-file
+ default 125
+ 8:16 170
+
+- For events which are not very high frequency, an interface file
+ "events" should be created which lists event key value pairs.
+ Whenever a notifiable event happens, file modified event should be
+ generated on the file.
+
+
+4-3. Core Interface Files
+
+All cgroup core files are prefixed with "cgroup."
+
+ cgroup.procs
+
+ A read-write new-line separated values file which exists on
+ all cgroups.
+
+ When read, it lists the PIDs of all processes which belong to
+ the cgroup one-per-line. The PIDs are not ordered and the
+ same PID may show up more than once if the process got moved
+ to another cgroup and then back or the PID got recycled while
+ reading.
+
+ A PID can be written to migrate the process associated with
+ the PID to the cgroup. The writer should match all of the
+ following conditions.
+
+ - Its euid is either root or must match either uid or suid of
+ the target process.
+
+ - It must have write access to the "cgroup.procs" file.
+
+ - It must have write access to the "cgroup.procs" file of the
+ common ancestor of the source and destination cgroups.
+
+ When delegating a sub-hierarchy, write access to this file
+ should be granted along with the containing directory.
+
+ cgroup.controllers
+
+ A read-only space separated values file which exists on all
+ cgroups.
+
+ It shows space separated list of all controllers available to
+ the cgroup. The controllers are not ordered.
+
+ cgroup.subtree_control
+
+ A read-write space separated values file which exists on all
+ cgroups. Starts out empty.
+
+ When read, it shows space separated list of the controllers
+ which are enabled to control resource distribution from the
+ cgroup to its children.
+
+ Space separated list of controllers prefixed with '+' or '-'
+ can be written to enable or disable controllers. A controller
+ name prefixed with '+' enables the controller and '-'
+ disables. If a controller appears more than once on the list,
+ the last one is effective. When multiple enable and disable
+ operations are specified, either all succeed or all fail.
+
+ cgroup.events
+
+ A read-only flat-keyed file which exists on non-root cgroups.
+ The following entries are defined. Unless specified
+ otherwise, a value change in this file generates a file
+ modified event.
+
+ populated
+
+ 1 if the cgroup or its descendants contains any live
+ processes; otherwise, 0.
+
+
+5. Controllers
+
+5-1. CPU
+
+[NOTE: The interface for the cpu controller hasn't been merged yet]
+
+The "cpu" controllers regulates distribution of CPU cycles. This
+controller implements weight and absolute bandwidth limit models for
+normal scheduling policy and absolute bandwidth allocation model for
+realtime scheduling policy.
+
+
+5-1-1. CPU Interface Files
+
+All time durations are in microseconds.
+
+ cpu.stat
+
+ A read-only flat-keyed file which exists on non-root cgroups.
+
+ It reports the following six stats.
+
+ usage_usec
+ user_usec
+ system_usec
+ nr_periods
+ nr_throttled
+ throttled_usec
+
+ cpu.weight
+
+ A read-write single value file which exists on non-root
+ cgroups. The default is "100".
+
+ The weight in the range [1, 10000].
+
+ cpu.max
+
+ A read-write two value file which exists on non-root cgroups.
+ The default is "max 100000".
+
+ The maximum bandwidth limit. It's in the following format.
+
+ $MAX $PERIOD
+
+ which indicates that the group may consume upto $MAX in each
+ $PERIOD duration. "max" for $MAX indicates no limit. If only
+ one number is written, $MAX is updated.
+
+ cpu.rt.max
+
+ [NOTE: The semantics of this file is still under discussion and the
+ interface hasn't been merged yet]
+
+ A read-write two value file which exists on all cgroups.
+ The default is "0 100000".
+
+ The maximum realtime runtime allocation. Over-committing
+ configurations are disallowed and process migrations are
+ rejected if not enough bandwidth is available. It's in the
+ following format.
+
+ $MAX $PERIOD
+
+ which indicates that the group may consume upto $MAX in each
+ $PERIOD duration. If only one number is written, $MAX is
+ updated.
+
+
+5-2. Memory
+
+The "memory" controller regulates distribution of memory. Memory is
+stateful and implements both limit and protection models. Due to the
+intertwining between memory usage and reclaim pressure and the
+stateful nature of memory, the distribution model is relatively
+complex.
+
+While not completely water-tight, all major memory usages by a given
+cgroup are tracked so that the total memory consumption can be
+accounted and controlled to a reasonable extent. Currently, the
+following types of memory usages are tracked.
+
+- Userland memory - page cache and anonymous memory.
+
+- Kernel data structures such as dentries and inodes.
+
+- TCP socket buffers.
+
+The above list may expand in the future for better coverage.
+
+
+5-2-1. Memory Interface Files
+
+All memory amounts are in bytes. If a value which is not aligned to
+PAGE_SIZE is written, the value may be rounded up to the closest
+PAGE_SIZE multiple when read back.
+
+ memory.current
+
+ A read-only single value file which exists on non-root
+ cgroups.
+
+ The total amount of memory currently being used by the cgroup
+ and its descendants.
+
+ memory.low
+
+ A read-write single value file which exists on non-root
+ cgroups. The default is "0".
+
+ Best-effort memory protection. If the memory usages of a
+ cgroup and all its ancestors are below their low boundaries,
+ the cgroup's memory won't be reclaimed unless memory can be
+ reclaimed from unprotected cgroups.
+
+ Putting more memory than generally available under this
+ protection is discouraged.
+
+ memory.high
+
+ A read-write single value file which exists on non-root
+ cgroups. The default is "max".
+
+ Memory usage throttle limit. This is the main mechanism to
+ control memory usage of a cgroup. If a cgroup's usage goes
+ over the high boundary, the processes of the cgroup are
+ throttled and put under heavy reclaim pressure.
+
+ Going over the high limit never invokes the OOM killer and
+ under extreme conditions the limit may be breached.
+
+ memory.max
+
+ A read-write single value file which exists on non-root
+ cgroups. The default is "max".
+
+ Memory usage hard limit. This is the final protection
+ mechanism. If a cgroup's memory usage reaches this limit and
+ can't be reduced, the OOM killer is invoked in the cgroup.
+ Under certain circumstances, the usage may go over the limit
+ temporarily.
+
+ This is the ultimate protection mechanism. As long as the
+ high limit is used and monitored properly, this limit's
+ utility is limited to providing the final safety net.
+
+ memory.events
+
+ A read-only flat-keyed file which exists on non-root cgroups.
+ The following entries are defined. Unless specified
+ otherwise, a value change in this file generates a file
+ modified event.
+
+ low
+
+ The number of times the cgroup is reclaimed due to
+ high memory pressure even though its usage is under
+ the low boundary. This usually indicates that the low
+ boundary is over-committed.
+
+ high
+
+ The number of times processes of the cgroup are
+ throttled and routed to perform direct memory reclaim
+ because the high memory boundary was exceeded. For a
+ cgroup whose memory usage is capped by the high limit
+ rather than global memory pressure, this event's
+ occurrences are expected.
+
+ max
+
+ The number of times the cgroup's memory usage was
+ about to go over the max boundary. If direct reclaim
+ fails to bring it down, the OOM killer is invoked.
+
+ oom
+
+ The number of times the OOM killer has been invoked in
+ the cgroup. This may not exactly match the number of
+ processes killed but should generally be close.
+
+ memory.stat
+
+ A read-only flat-keyed file which exists on non-root cgroups.
+
+ This breaks down the cgroup's memory footprint into different
+ types of memory, type-specific details, and other information
+ on the state and past events of the memory management system.
+
+ All memory amounts are in bytes.
+
+ The entries are ordered to be human readable, and new entries
+ can show up in the middle. Don't rely on items remaining in a
+ fixed position; use the keys to look up specific values!
+
+ anon
+
+ Amount of memory used in anonymous mappings such as
+ brk(), sbrk(), and mmap(MAP_ANONYMOUS)
+
+ file
+
+ Amount of memory used to cache filesystem data,
+ including tmpfs and shared memory.
+
+ sock
+
+ Amount of memory used in network transmission buffers
+
+ file_mapped
+
+ Amount of cached filesystem data mapped with mmap()
+
+ file_dirty
+
+ Amount of cached filesystem data that was modified but
+ not yet written back to disk
+
+ file_writeback
+
+ Amount of cached filesystem data that was modified and
+ is currently being written back to disk
+
+ inactive_anon
+ active_anon
+ inactive_file
+ active_file
+ unevictable
+
+ Amount of memory, swap-backed and filesystem-backed,
+ on the internal memory management lists used by the
+ page reclaim algorithm
+
+ pgfault
+
+ Total number of page faults incurred
+
+ pgmajfault
+
+ Number of major page faults incurred
+
+ memory.swap.current
+
+ A read-only single value file which exists on non-root
+ cgroups.
+
+ The total amount of swap currently being used by the cgroup
+ and its descendants.
+
+ memory.swap.max
+
+ A read-write single value file which exists on non-root
+ cgroups. The default is "max".
+
+ Swap usage hard limit. If a cgroup's swap usage reaches this
+ limit, anonymous meomry of the cgroup will not be swapped out.
+
+
+5-2-2. General Usage
+
+"memory.high" is the main mechanism to control memory usage.
+Over-committing on high limit (sum of high limits > available memory)
+and letting global memory pressure to distribute memory according to
+usage is a viable strategy.
+
+Because breach of the high limit doesn't trigger the OOM killer but
+throttles the offending cgroup, a management agent has ample
+opportunities to monitor and take appropriate actions such as granting
+more memory or terminating the workload.
+
+Determining whether a cgroup has enough memory is not trivial as
+memory usage doesn't indicate whether the workload can benefit from
+more memory. For example, a workload which writes data received from
+network to a file can use all available memory but can also operate as
+performant with a small amount of memory. A measure of memory
+pressure - how much the workload is being impacted due to lack of
+memory - is necessary to determine whether a workload needs more
+memory; unfortunately, memory pressure monitoring mechanism isn't
+implemented yet.
+
+
+5-2-3. Memory Ownership
+
+A memory area is charged to the cgroup which instantiated it and stays
+charged to the cgroup until the area is released. Migrating a process
+to a different cgroup doesn't move the memory usages that it
+instantiated while in the previous cgroup to the new cgroup.
+
+A memory area may be used by processes belonging to different cgroups.
+To which cgroup the area will be charged is in-deterministic; however,
+over time, the memory area is likely to end up in a cgroup which has
+enough memory allowance to avoid high reclaim pressure.
+
+If a cgroup sweeps a considerable amount of memory which is expected
+to be accessed repeatedly by other cgroups, it may make sense to use
+POSIX_FADV_DONTNEED to relinquish the ownership of memory areas
+belonging to the affected files to ensure correct memory ownership.
+
+
+5-3. IO
+
+The "io" controller regulates the distribution of IO resources. This
+controller implements both weight based and absolute bandwidth or IOPS
+limit distribution; however, weight based distribution is available
+only if cfq-iosched is in use and neither scheme is available for
+blk-mq devices.
+
+
+5-3-1. IO Interface Files
+
+ io.stat
+
+ A read-only nested-keyed file which exists on non-root
+ cgroups.
+
+ Lines are keyed by $MAJ:$MIN device numbers and not ordered.
+ The following nested keys are defined.
+
+ rbytes Bytes read
+ wbytes Bytes written
+ rios Number of read IOs
+ wios Number of write IOs
+
+ An example read output follows.
+
+ 8:16 rbytes=1459200 wbytes=314773504 rios=192 wios=353
+ 8:0 rbytes=90430464 wbytes=299008000 rios=8950 wios=1252
+
+ io.weight
+
+ A read-write flat-keyed file which exists on non-root cgroups.
+ The default is "default 100".
+
+ The first line is the default weight applied to devices
+ without specific override. The rest are overrides keyed by
+ $MAJ:$MIN device numbers and not ordered. The weights are in
+ the range [1, 10000] and specifies the relative amount IO time
+ the cgroup can use in relation to its siblings.
+
+ The default weight can be updated by writing either "default
+ $WEIGHT" or simply "$WEIGHT". Overrides can be set by writing
+ "$MAJ:$MIN $WEIGHT" and unset by writing "$MAJ:$MIN default".
+
+ An example read output follows.
+
+ default 100
+ 8:16 200
+ 8:0 50
+
+ io.max
+
+ A read-write nested-keyed file which exists on non-root
+ cgroups.
+
+ BPS and IOPS based IO limit. Lines are keyed by $MAJ:$MIN
+ device numbers and not ordered. The following nested keys are
+ defined.
+
+ rbps Max read bytes per second
+ wbps Max write bytes per second
+ riops Max read IO operations per second
+ wiops Max write IO operations per second
+
+ When writing, any number of nested key-value pairs can be
+ specified in any order. "max" can be specified as the value
+ to remove a specific limit. If the same key is specified
+ multiple times, the outcome is undefined.
+
+ BPS and IOPS are measured in each IO direction and IOs are
+ delayed if limit is reached. Temporary bursts are allowed.
+
+ Setting read limit at 2M BPS and write at 120 IOPS for 8:16.
+
+ echo "8:16 rbps=2097152 wiops=120" > io.max
+
+ Reading returns the following.
+
+ 8:16 rbps=2097152 wbps=max riops=max wiops=120
+
+ Write IOPS limit can be removed by writing the following.
+
+ echo "8:16 wiops=max" > io.max
+
+ Reading now returns the following.
+
+ 8:16 rbps=2097152 wbps=max riops=max wiops=max
+
+
+5-3-2. Writeback
+
+Page cache is dirtied through buffered writes and shared mmaps and
+written asynchronously to the backing filesystem by the writeback
+mechanism. Writeback sits between the memory and IO domains and
+regulates the proportion of dirty memory by balancing dirtying and
+write IOs.
+
+The io controller, in conjunction with the memory controller,
+implements control of page cache writeback IOs. The memory controller
+defines the memory domain that dirty memory ratio is calculated and
+maintained for and the io controller defines the io domain which
+writes out dirty pages for the memory domain. Both system-wide and
+per-cgroup dirty memory states are examined and the more restrictive
+of the two is enforced.
+
+cgroup writeback requires explicit support from the underlying
+filesystem. Currently, cgroup writeback is implemented on ext2, ext4
+and btrfs. On other filesystems, all writeback IOs are attributed to
+the root cgroup.
+
+There are inherent differences in memory and writeback management
+which affects how cgroup ownership is tracked. Memory is tracked per
+page while writeback per inode. For the purpose of writeback, an
+inode is assigned to a cgroup and all IO requests to write dirty pages
+from the inode are attributed to that cgroup.
+
+As cgroup ownership for memory is tracked per page, there can be pages
+which are associated with different cgroups than the one the inode is
+associated with. These are called foreign pages. The writeback
+constantly keeps track of foreign pages and, if a particular foreign
+cgroup becomes the majority over a certain period of time, switches
+the ownership of the inode to that cgroup.
+
+While this model is enough for most use cases where a given inode is
+mostly dirtied by a single cgroup even when the main writing cgroup
+changes over time, use cases where multiple cgroups write to a single
+inode simultaneously are not supported well. In such circumstances, a
+significant portion of IOs are likely to be attributed incorrectly.
+As memory controller assigns page ownership on the first use and
+doesn't update it until the page is released, even if writeback
+strictly follows page ownership, multiple cgroups dirtying overlapping
+areas wouldn't work as expected. It's recommended to avoid such usage
+patterns.
+
+The sysctl knobs which affect writeback behavior are applied to cgroup
+writeback as follows.
+
+ vm.dirty_background_ratio
+ vm.dirty_ratio
+
+ These ratios apply the same to cgroup writeback with the
+ amount of available memory capped by limits imposed by the
+ memory controller and system-wide clean memory.
+
+ vm.dirty_background_bytes
+ vm.dirty_bytes
+
+ For cgroup writeback, this is calculated into ratio against
+ total available memory and applied the same way as
+ vm.dirty[_background]_ratio.
+
+
+P. Information on Kernel Programming
+
+This section contains kernel programming information in the areas
+where interacting with cgroup is necessary. cgroup core and
+controllers are not covered.
+
+
+P-1. Filesystem Support for Writeback
+
+A filesystem can support cgroup writeback by updating
+address_space_operations->writepage[s]() to annotate bio's using the
+following two functions.
+
+ wbc_init_bio(@wbc, @bio)
+
+ Should be called for each bio carrying writeback data and
+ associates the bio with the inode's owner cgroup. Can be
+ called anytime between bio allocation and submission.
+
+ wbc_account_io(@wbc, @page, @bytes)
+
+ Should be called for each data segment being written out.
+ While this function doesn't care exactly when it's called
+ during the writeback session, it's the easiest and most
+ natural to call it as data segments are added to a bio.
+
+With writeback bio's annotated, cgroup support can be enabled per
+super_block by setting SB_I_CGROUPWB in ->s_iflags. This allows for
+selective disabling of cgroup writeback support which is helpful when
+certain filesystem features, e.g. journaled data mode, are
+incompatible.
+
+wbc_init_bio() binds the specified bio to its cgroup. Depending on
+the configuration, the bio may be executed at a lower priority and if
+the writeback session is holding shared resources, e.g. a journal
+entry, may lead to priority inversion. There is no one easy solution
+for the problem. Filesystems can try to work around specific problem
+cases by skipping wbc_init_bio() or using bio_associate_blkcg()
+directly.
+
+
+D. Deprecated v1 Core Features
+
+- Multiple hierarchies including named ones are not supported.
+
+- All mount options and remounting are not supported.
+
+- The "tasks" file is removed and "cgroup.procs" is not sorted.
+
+- "cgroup.clone_children" is removed.
+
+- /proc/cgroups is meaningless for v2. Use "cgroup.controllers" file
+ at the root instead.
+
+
+R. Issues with v1 and Rationales for v2
+
+R-1. Multiple Hierarchies
+
+cgroup v1 allowed an arbitrary number of hierarchies and each
+hierarchy could host any number of controllers. While this seemed to
+provide a high level of flexibility, it wasn't useful in practice.
+
+For example, as there is only one instance of each controller, utility
+type controllers such as freezer which can be useful in all
+hierarchies could only be used in one. The issue is exacerbated by
+the fact that controllers couldn't be moved to another hierarchy once
+hierarchies were populated. Another issue was that all controllers
+bound to a hierarchy were forced to have exactly the same view of the
+hierarchy. It wasn't possible to vary the granularity depending on
+the specific controller.
+
+In practice, these issues heavily limited which controllers could be
+put on the same hierarchy and most configurations resorted to putting
+each controller on its own hierarchy. Only closely related ones, such
+as the cpu and cpuacct controllers, made sense to be put on the same
+hierarchy. This often meant that userland ended up managing multiple
+similar hierarchies repeating the same steps on each hierarchy
+whenever a hierarchy management operation was necessary.
+
+Furthermore, support for multiple hierarchies came at a steep cost.
+It greatly complicated cgroup core implementation but more importantly
+the support for multiple hierarchies restricted how cgroup could be
+used in general and what controllers was able to do.
+
+There was no limit on how many hierarchies there might be, which meant
+that a thread's cgroup membership couldn't be described in finite
+length. The key might contain any number of entries and was unlimited
+in length, which made it highly awkward to manipulate and led to
+addition of controllers which existed only to identify membership,
+which in turn exacerbated the original problem of proliferating number
+of hierarchies.
+
+Also, as a controller couldn't have any expectation regarding the
+topologies of hierarchies other controllers might be on, each
+controller had to assume that all other controllers were attached to
+completely orthogonal hierarchies. This made it impossible, or at
+least very cumbersome, for controllers to cooperate with each other.
+
+In most use cases, putting controllers on hierarchies which are
+completely orthogonal to each other isn't necessary. What usually is
+called for is the ability to have differing levels of granularity
+depending on the specific controller. In other words, hierarchy may
+be collapsed from leaf towards root when viewed from specific
+controllers. For example, a given configuration might not care about
+how memory is distributed beyond a certain level while still wanting
+to control how CPU cycles are distributed.
+
+
+R-2. Thread Granularity
+
+cgroup v1 allowed threads of a process to belong to different cgroups.
+This didn't make sense for some controllers and those controllers
+ended up implementing different ways to ignore such situations but
+much more importantly it blurred the line between API exposed to
+individual applications and system management interface.
+
+Generally, in-process knowledge is available only to the process
+itself; thus, unlike service-level organization of processes,
+categorizing threads of a process requires active participation from
+the application which owns the target process.
+
+cgroup v1 had an ambiguously defined delegation model which got abused
+in combination with thread granularity. cgroups were delegated to
+individual applications so that they can create and manage their own
+sub-hierarchies and control resource distributions along them. This
+effectively raised cgroup to the status of a syscall-like API exposed
+to lay programs.
+
+First of all, cgroup has a fundamentally inadequate interface to be
+exposed this way. For a process to access its own knobs, it has to
+extract the path on the target hierarchy from /proc/self/cgroup,
+construct the path by appending the name of the knob to the path, open
+and then read and/or write to it. This is not only extremely clunky
+and unusual but also inherently racy. There is no conventional way to
+define transaction across the required steps and nothing can guarantee
+that the process would actually be operating on its own sub-hierarchy.
+
+cgroup controllers implemented a number of knobs which would never be
+accepted as public APIs because they were just adding control knobs to
+system-management pseudo filesystem. cgroup ended up with interface
+knobs which were not properly abstracted or refined and directly
+revealed kernel internal details. These knobs got exposed to
+individual applications through the ill-defined delegation mechanism
+effectively abusing cgroup as a shortcut to implementing public APIs
+without going through the required scrutiny.
+
+This was painful for both userland and kernel. Userland ended up with
+misbehaving and poorly abstracted interfaces and kernel exposing and
+locked into constructs inadvertently.
+
+
+R-3. Competition Between Inner Nodes and Threads
+
+cgroup v1 allowed threads to be in any cgroups which created an
+interesting problem where threads belonging to a parent cgroup and its
+children cgroups competed for resources. This was nasty as two
+different types of entities competed and there was no obvious way to
+settle it. Different controllers did different things.
+
+The cpu controller considered threads and cgroups as equivalents and
+mapped nice levels to cgroup weights. This worked for some cases but
+fell flat when children wanted to be allocated specific ratios of CPU
+cycles and the number of internal threads fluctuated - the ratios
+constantly changed as the number of competing entities fluctuated.
+There also were other issues. The mapping from nice level to weight
+wasn't obvious or universal, and there were various other knobs which
+simply weren't available for threads.
+
+The io controller implicitly created a hidden leaf node for each
+cgroup to host the threads. The hidden leaf had its own copies of all
+the knobs with "leaf_" prefixed. While this allowed equivalent
+control over internal threads, it was with serious drawbacks. It
+always added an extra layer of nesting which wouldn't be necessary
+otherwise, made the interface messy and significantly complicated the
+implementation.
+
+The memory controller didn't have a way to control what happened
+between internal tasks and child cgroups and the behavior was not
+clearly defined. There were attempts to add ad-hoc behaviors and
+knobs to tailor the behavior to specific workloads which would have
+led to problems extremely difficult to resolve in the long term.
+
+Multiple controllers struggled with internal tasks and came up with
+different ways to deal with it; unfortunately, all the approaches were
+severely flawed and, furthermore, the widely different behaviors
+made cgroup as a whole highly inconsistent.
+
+This clearly is a problem which needs to be addressed from cgroup core
+in a uniform way.
+
+
+R-4. Other Interface Issues
+
+cgroup v1 grew without oversight and developed a large number of
+idiosyncrasies and inconsistencies. One issue on the cgroup core side
+was how an empty cgroup was notified - a userland helper binary was
+forked and executed for each event. The event delivery wasn't
+recursive or delegatable. The limitations of the mechanism also led
+to in-kernel event delivery filtering mechanism further complicating
+the interface.
+
+Controller interfaces were problematic too. An extreme example is
+controllers completely ignoring hierarchical organization and treating
+all cgroups as if they were all located directly under the root
+cgroup. Some controllers exposed a large amount of inconsistent
+implementation details to userland.
+
+There also was no consistency across controllers. When a new cgroup
+was created, some controllers defaulted to not imposing extra
+restrictions while others disallowed any resource usage until
+explicitly configured. Configuration knobs for the same type of
+control used widely differing naming schemes and formats. Statistics
+and information knobs were named arbitrarily and used different
+formats and units even in the same controller.
+
+cgroup v2 establishes common conventions where appropriate and updates
+controllers so that they expose minimal and consistent interfaces.
+
+
+R-5. Controller Issues and Remedies
+
+R-5-1. Memory
+
+The original lower boundary, the soft limit, is defined as a limit
+that is per default unset. As a result, the set of cgroups that
+global reclaim prefers is opt-in, rather than opt-out. The costs for
+optimizing these mostly negative lookups are so high that the
+implementation, despite its enormous size, does not even provide the
+basic desirable behavior. First off, the soft limit has no
+hierarchical meaning. All configured groups are organized in a global
+rbtree and treated like equal peers, regardless where they are located
+in the hierarchy. This makes subtree delegation impossible. Second,
+the soft limit reclaim pass is so aggressive that it not just
+introduces high allocation latencies into the system, but also impacts
+system performance due to overreclaim, to the point where the feature
+becomes self-defeating.
+
+The memory.low boundary on the other hand is a top-down allocated
+reserve. A cgroup enjoys reclaim protection when it and all its
+ancestors are below their low boundaries, which makes delegation of
+subtrees possible. Secondly, new cgroups have no reserve per default
+and in the common case most cgroups are eligible for the preferred
+reclaim pass. This allows the new low boundary to be efficiently
+implemented with just a minor addition to the generic reclaim code,
+without the need for out-of-band data structures and reclaim passes.
+Because the generic reclaim code considers all cgroups except for the
+ones running low in the preferred first reclaim pass, overreclaim of
+individual groups is eliminated as well, resulting in much better
+overall workload performance.
+
+The original high boundary, the hard limit, is defined as a strict
+limit that can not budge, even if the OOM killer has to be called.
+But this generally goes against the goal of making the most out of the
+available memory. The memory consumption of workloads varies during
+runtime, and that requires users to overcommit. But doing that with a
+strict upper limit requires either a fairly accurate prediction of the
+working set size or adding slack to the limit. Since working set size
+estimation is hard and error prone, and getting it wrong results in
+OOM kills, most users tend to err on the side of a looser limit and
+end up wasting precious resources.
+
+The memory.high boundary on the other hand can be set much more
+conservatively. When hit, it throttles allocations by forcing them
+into direct reclaim to work off the excess, but it never invokes the
+OOM killer. As a result, a high boundary that is chosen too
+aggressively will not terminate the processes, but instead it will
+lead to gradual performance degradation. The user can monitor this
+and make corrections until the minimal memory footprint that still
+gives acceptable performance is found.
+
+In extreme cases, with many concurrent allocations and a complete
+breakdown of reclaim progress within the group, the high boundary can
+be exceeded. But even then it's mostly better to satisfy the
+allocation from the slack available in other groups or the rest of the
+system than killing the group. Otherwise, memory.max is there to
+limit this type of spillover and ultimately contain buggy or even
+malicious applications.
+
+The combined memory+swap accounting and limiting is replaced by real
+control over swap space.
+
+The main argument for a combined memory+swap facility in the original
+cgroup design was that global or parental pressure would always be
+able to swap all anonymous memory of a child group, regardless of the
+child's own (possibly untrusted) configuration. However, untrusted
+groups can sabotage swapping by other means - such as referencing its
+anonymous memory in a tight loop - and an admin can not assume full
+swappability when overcommitting untrusted jobs.
+
+For trusted jobs, on the other hand, a combined counter is not an
+intuitive userspace interface, and it flies in the face of the idea
+that cgroup controllers should account and limit specific physical
+resources. Swap space is a resource like all others in the system,
+and that's why unified hierarchy allows distributing it separately.