summaryrefslogtreecommitdiff
path: root/Documentation/device-mapper
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/device-mapper')
-rw-r--r--Documentation/device-mapper/cache-policies.txt67
-rw-r--r--Documentation/device-mapper/cache.txt15
-rw-r--r--Documentation/device-mapper/dm-raid.txt2
-rw-r--r--Documentation/device-mapper/statistics.txt41
-rw-r--r--Documentation/device-mapper/thin-provisioning.txt9
5 files changed, 124 insertions, 10 deletions
diff --git a/Documentation/device-mapper/cache-policies.txt b/Documentation/device-mapper/cache-policies.txt
index 0d124a971..d9246a32e 100644
--- a/Documentation/device-mapper/cache-policies.txt
+++ b/Documentation/device-mapper/cache-policies.txt
@@ -25,10 +25,10 @@ trying to see when the io scheduler has let the ios run.
Overview of supplied cache replacement policies
===============================================
-multiqueue
-----------
+multiqueue (mq)
+---------------
-This policy is the default.
+This policy has been deprecated in favor of the smq policy (see below).
The multiqueue policy has three sets of 16 queues: one set for entries
waiting for the cache and another two for those in the cache (a set for
@@ -73,6 +73,67 @@ If you're trying to quickly warm a new cache device you may wish to
reduce these to encourage promotion. Remember to switch them back to
their defaults after the cache fills though.
+Stochastic multiqueue (smq)
+---------------------------
+
+This policy is the default.
+
+The stochastic multi-queue (smq) policy addresses some of the problems
+with the multiqueue (mq) policy.
+
+The smq policy (vs mq) offers the promise of less memory utilization,
+improved performance and increased adaptability in the face of changing
+workloads. SMQ also does not have any cumbersome tuning knobs.
+
+Users may switch from "mq" to "smq" simply by appropriately reloading a
+DM table that is using the cache target. Doing so will cause all of the
+mq policy's hints to be dropped. Also, performance of the cache may
+degrade slightly until smq recalculates the origin device's hotspots
+that should be cached.
+
+Memory usage:
+The mq policy uses a lot of memory; 88 bytes per cache block on a 64
+bit machine.
+
+SMQ uses 28bit indexes to implement it's data structures rather than
+pointers. It avoids storing an explicit hit count for each block. It
+has a 'hotspot' queue rather than a pre cache which uses a quarter of
+the entries (each hotspot block covers a larger area than a single
+cache block).
+
+All these mean smq uses ~25bytes per cache block. Still a lot of
+memory, but a substantial improvement nontheless.
+
+Level balancing:
+MQ places entries in different levels of the multiqueue structures
+based on their hit count (~ln(hit count)). This means the bottom
+levels generally have the most entries, and the top ones have very
+few. Having unbalanced levels like this reduces the efficacy of the
+multiqueue.
+
+SMQ does not maintain a hit count, instead it swaps hit entries with
+the least recently used entry from the level above. The over all
+ordering being a side effect of this stochastic process. With this
+scheme we can decide how many entries occupy each multiqueue level,
+resulting in better promotion/demotion decisions.
+
+Adaptability:
+The MQ policy maintains a hit count for each cache block. For a
+different block to get promoted to the cache it's hit count has to
+exceed the lowest currently in the cache. This means it can take a
+long time for the cache to adapt between varying IO patterns.
+Periodically degrading the hit counts could help with this, but I
+haven't found a nice general solution.
+
+SMQ doesn't maintain hit counts, so a lot of this problem just goes
+away. In addition it tracks performance of the hotspot queue, which
+is used to decide which blocks to promote. If the hotspot queue is
+performing badly then it starts moving entries more quickly between
+levels. This lets it adapt to new IO patterns very quickly.
+
+Performance:
+Testing SMQ shows substantially better performance than MQ.
+
cleaner
-------
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index 68c0f517c..785eab87a 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -221,6 +221,7 @@ Status
<#read hits> <#read misses> <#write hits> <#write misses>
<#demotions> <#promotions> <#dirty> <#features> <features>*
<#core args> <core args>* <policy name> <#policy args> <policy args>*
+<cache metadata mode>
metadata block size : Fixed block size for each metadata block in
sectors
@@ -251,8 +252,18 @@ core args : Key/value pairs for tuning the core
e.g. migration_threshold
policy name : Name of the policy
#policy args : Number of policy arguments to follow (must be even)
-policy args : Key/value pairs
- e.g. sequential_threshold
+policy args : Key/value pairs e.g. sequential_threshold
+cache metadata mode : ro if read-only, rw if read-write
+ In serious cases where even a read-only mode is deemed unsafe
+ no further I/O will be permitted and the status will just
+ contain the string 'Fail'. The userspace recovery tools
+ should then be used.
+needs_check : 'needs_check' if set, '-' if not set
+ A metadata operation has failed, resulting in the needs_check
+ flag being set in the metadata's superblock. The metadata
+ device must be deactivated and checked/repaired before the
+ cache can be made fully operational again. '-' indicates
+ needs_check is not set.
Messages
--------
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index ef8ba9fa5..cb12af3b5 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -224,3 +224,5 @@ Version History
New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt.
1.5.1 Add ability to restore transiently failed devices on resume.
1.5.2 'mismatch_cnt' is zero unless [last_]sync_action is "check".
+1.6.0 Add discard support (and devices_handle_discard_safely module param).
+1.7.0 Add support for MD RAID0 mappings.
diff --git a/Documentation/device-mapper/statistics.txt b/Documentation/device-mapper/statistics.txt
index 2a1673adc..4919b2dfd 100644
--- a/Documentation/device-mapper/statistics.txt
+++ b/Documentation/device-mapper/statistics.txt
@@ -13,9 +13,14 @@ the range specified.
The I/O statistics counters for each step-sized area of a region are
in the same format as /sys/block/*/stat or /proc/diskstats (see:
Documentation/iostats.txt). But two extra counters (12 and 13) are
-provided: total time spent reading and writing in milliseconds. All
-these counters may be accessed by sending the @stats_print message to
-the appropriate DM device via dmsetup.
+provided: total time spent reading and writing. When the histogram
+argument is used, the 14th parameter is reported that represents the
+histogram of latencies. All these counters may be accessed by sending
+the @stats_print message to the appropriate DM device via dmsetup.
+
+The reported times are in milliseconds and the granularity depends on
+the kernel ticks. When the option precise_timestamps is used, the
+reported times are in nanoseconds.
Each region has a corresponding unique identifier, which we call a
region_id, that is assigned when the region is created. The region_id
@@ -33,7 +38,9 @@ memory is used by reading
Messages
========
- @stats_create <range> <step> [<program_id> [<aux_data>]]
+ @stats_create <range> <step>
+ [<number_of_optional_arguments> <optional_arguments>...]
+ [<program_id> [<aux_data>]]
Create a new region and return the region_id.
@@ -48,6 +55,29 @@ Messages
"/<number_of_areas>" - the range is subdivided into the specified
number of areas.
+ <number_of_optional_arguments>
+ The number of optional arguments
+
+ <optional_arguments>
+ The following optional arguments are supported
+ precise_timestamps - use precise timer with nanosecond resolution
+ instead of the "jiffies" variable. When this argument is
+ used, the resulting times are in nanoseconds instead of
+ milliseconds. Precise timestamps are a little bit slower
+ to obtain than jiffies-based timestamps.
+ histogram:n1,n2,n3,n4,... - collect histogram of latencies. The
+ numbers n1, n2, etc are times that represent the boundaries
+ of the histogram. If precise_timestamps is not used, the
+ times are in milliseconds, otherwise they are in
+ nanoseconds. For each range, the kernel will report the
+ number of requests that completed within this range. For
+ example, if we use "histogram:10,20,30", the kernel will
+ report four numbers a:b:c:d. a is the number of requests
+ that took 0-10 ms to complete, b is the number of requests
+ that took 10-20 ms to complete, c is the number of requests
+ that took 20-30 ms to complete and d is the number of
+ requests that took more than 30 ms to complete.
+
<program_id>
An optional parameter. A name that uniquely identifies
the userspace owner of the range. This groups ranges together
@@ -55,6 +85,9 @@ Messages
created and ignore those created by others.
The kernel returns this string back in the output of
@stats_list message, but it doesn't use it for anything else.
+ If we omit the number of optional arguments, program id must not
+ be a number, otherwise it would be interpreted as the number of
+ optional arguments.
<aux_data>
An optional parameter. A word that provides auxiliary data
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 4f67578b2..1699a55b7 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -296,7 +296,7 @@ ii) Status
underlying device. When this is enabled when loading the table,
it can get disabled if the underlying device doesn't support it.
- ro|rw
+ ro|rw|out_of_data_space
If the pool encounters certain types of device failures it will
drop into a read-only metadata mode in which no changes to
the pool metadata (like allocating new blocks) are permitted.
@@ -314,6 +314,13 @@ ii) Status
module parameter can be used to change this timeout -- it
defaults to 60 seconds but may be disabled using a value of 0.
+ needs_check
+ A metadata operation has failed, resulting in the needs_check
+ flag being set in the metadata's superblock. The metadata
+ device must be deactivated and checked/repaired before the
+ thin-pool can be made fully operational again. '-' indicates
+ needs_check is not set.
+
iii) Messages
create_thin <dev id>