summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/arm/exynos
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/arm/exynos')
-rw-r--r--Documentation/devicetree/bindings/arm/exynos/power_domain.txt52
-rw-r--r--Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt38
2 files changed, 90 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
new file mode 100644
index 000000000..5da38c5ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -0,0 +1,52 @@
+* Samsung Exynos Power Domains
+
+Exynos processors include support for multiple power domains which are used
+to gate power to one or more peripherals on the processor.
+
+Required Properties:
+- compatible: should be one of the following.
+ * samsung,exynos4210-pd - for exynos4210 type power domain.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #power-domain-cells: number of cells in power domain specifier;
+ must be 0.
+
+Optional Properties:
+- clocks: List of clock handles. The parent clocks of the input clocks to the
+ devices in this power domain are set to oscclk before power gating
+ and restored back after powering on a domain. This is required for
+ all domains which are powered on and off and not required for unused
+ domains.
+- clock-names: The following clocks can be specified:
+ - oscclk: Oscillator clock.
+ - pclkN, clkN: Pairs of parent of input clock and input clock to the
+ devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
+ are supported currently.
+ - asbN: Clocks required by asynchronous bridges (ASB) present in
+ the power domain. These clock should be enabled during power
+ domain on/off operations.
+- power-domains: phandle pointing to the parent power domain, for more details
+ see Documentation/devicetree/bindings/power/power_domain.txt
+
+Node of a device using power domains must have a power-domains property
+defined with a phandle to respective power domain.
+
+Example:
+
+ lcd0: power-domain-lcd0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C00 0x10>;
+ #power-domain-cells = <0>;
+ };
+
+ mfc_pd: power-domain@10044060 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044060 0x20>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
+ <&clock CLK_MOUT_USER_ACLK333>;
+ clock-names = "oscclk", "pclk0", "clk0";
+ #power-domain-cells = <0>;
+ };
+
+See Documentation/devicetree/bindings/power/power_domain.txt for description
+of consumer-side bindings.
diff --git a/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt
new file mode 100644
index 000000000..4a0a4f70a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt
@@ -0,0 +1,38 @@
+Samsung Exynos SYSRAM for SMP bringup:
+------------------------------------
+
+Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
+of the secondary cores. Once the core gets powered up it executes the
+code that is residing at some specific location of the SYSRAM.
+
+Therefore reserved section sub-nodes have to be added to the mmio-sram
+declaration. These nodes are of two types depending upon secure or
+non-secure execution environment.
+
+Required sub-node properties:
+- compatible : depending upon boot mode, should be
+ "samsung,exynos4210-sysram" : for Secure SYSRAM
+ "samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sysram.txt
+
+Example:
+
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x54000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x54000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@53000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x53000 0x1000>;
+ };
+ };