diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma/sun6i-dma.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/dma/sun6i-dma.txt | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt new file mode 100644 index 000000000..9cdcba24d --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -0,0 +1,45 @@ +Allwinner A31 DMA Controller + +This driver follows the generic DMA bindings defined in dma.txt. + +Required properties: + +- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma" +- reg: Should contain the registers base address and length +- interrupts: Should contain a reference to the interrupt used by this device +- clocks: Should contain a reference to the parent AHB clock +- resets: Should contain a reference to the reset controller asserting + this device in reset +- #dma-cells : Should be 1, a single cell holding a line request number + +Example: + dma: dma-controller@01c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + +Clients: + +DMA clients connected to the A31 DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each +channel: a phandle plus one integer cells. +The two cells in order are: + +1. A phandle pointing to the DMA controller. +2. The port ID as specified in the datasheet + +Example: +spi2: spi@01c6a000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c6a000 0x1000>; + interrupts = <0 67 4>; + clocks = <&ahb1_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; + resets = <&ahb1_rst 22>; +}; |