summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/dma
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/dma')
-rw-r--r--Documentation/devicetree/bindings/dma/apm-xgene-dma.txt47
-rw-r--r--Documentation/devicetree/bindings/dma/arm-pl330.txt44
-rw-r--r--Documentation/devicetree/bindings/dma/atmel-dma.txt42
-rw-r--r--Documentation/devicetree/bindings/dma/atmel-xdma.txt54
-rw-r--r--Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt57
-rw-r--r--Documentation/devicetree/bindings/dma/dma.txt81
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-edma.txt76
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-dma.txt48
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt85
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt60
-rw-r--r--Documentation/devicetree/bindings/dma/img-mdc-dma.txt57
-rw-r--r--Documentation/devicetree/bindings/dma/jz4780-dma.txt56
-rw-r--r--Documentation/devicetree/bindings/dma/k3dma.txt46
-rw-r--r--Documentation/devicetree/bindings/dma/mmp-dma.txt77
-rw-r--r--Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt45
-rw-r--r--Documentation/devicetree/bindings/dma/mpc512x-dma.txt29
-rw-r--r--Documentation/devicetree/bindings/dma/mv-xor.txt40
-rw-r--r--Documentation/devicetree/bindings/dma/nbpfaxi.txt61
-rw-r--r--Documentation/devicetree/bindings/dma/qcom_adm.txt62
-rw-r--r--Documentation/devicetree/bindings/dma/qcom_bam_dma.txt44
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt95
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt37
-rw-r--r--Documentation/devicetree/bindings/dma/shdma.txt84
-rw-r--r--Documentation/devicetree/bindings/dma/sirfsoc-dma.txt43
-rw-r--r--Documentation/devicetree/bindings/dma/snps-dma.txt63
-rw-r--r--Documentation/devicetree/bindings/dma/ste-coh901318.txt32
-rw-r--r--Documentation/devicetree/bindings/dma/ste-dma40.txt139
-rw-r--r--Documentation/devicetree/bindings/dma/sun6i-dma.txt45
-rw-r--r--Documentation/devicetree/bindings/dma/tegra20-apbdma.txt44
-rw-r--r--Documentation/devicetree/bindings/dma/ti-edma.txt35
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt65
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt75
32 files changed, 1868 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
new file mode 100644
index 000000000..d3058768b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
@@ -0,0 +1,47 @@
+Applied Micro X-Gene SoC DMA nodes
+
+DMA nodes are defined to describe on-chip DMA interfaces in
+APM X-Gene SoC.
+
+Required properties for DMA interfaces:
+- compatible: Should be "apm,xgene-dma".
+- device_type: set to "dma".
+- reg: Address and length of the register set for the device.
+ It contains the information of registers in the following order:
+ 1st - DMA control and status register address space.
+ 2nd - Descriptor ring control and status register address space.
+ 3rd - Descriptor ring command register address space.
+ 4th - Soc efuse register address space.
+- interrupts: DMA has 5 interrupts sources. 1st interrupt is
+ DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
+ are completion interrupts for each DMA channels.
+- clocks: Reference to the clock entry.
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent
+
+Example:
+ dmaclk: dmaclk@1f27c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f27c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "dmaclk";
+ };
+
+ dma: dma@1f270000 {
+ compatible = "apm,xgene-storm-dma";
+ device_type = "dma";
+ reg = <0x0 0x1f270000 0x0 0x10000>,
+ <0x0 0x1f200000 0x0 0x10000>,
+ <0x0 0x1b008000 0x0 0x2000>,
+ <0x0 0x1054a000 0x0 0x100>;
+ interrupts = <0x0 0x82 0x4>,
+ <0x0 0xb8 0x4>,
+ <0x0 0xb9 0x4>,
+ <0x0 0xba 0x4>,
+ <0x0 0xbb 0x4>;
+ dma-coherent;
+ clocks = <&dmaclk 0>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
new file mode 100644
index 000000000..267565894
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt
@@ -0,0 +1,44 @@
+* ARM PrimeCell PL330 DMA Controller
+
+The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+between memory and peripherals or memory to memory.
+
+Required properties:
+ - compatible: should include both "arm,pl330" and "arm,primecell".
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Optional properties:
+ - dma-coherent : Present if dma operations are coherent
+ - #dma-cells: must be <1>. used to represent the number of integer
+ cells in the dmas property of client device.
+ - dma-channels: contains the total number of DMA channels supported by the DMAC
+ - dma-requests: contains the total number of DMA requests supported by the DMAC
+
+Example:
+
+ pdma0: pdma@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <99>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+Client drivers (device nodes requiring dma transfers from dev-to-mem or
+mem-to-dev) should specify the DMA channel numbers and dma channel names
+as shown below.
+
+ [property name] = <[phandle of the dma controller] [dma request id]>;
+ [property name] = <[dma channel name]>
+
+ where 'dma request id' is the dma request number which is connected
+ to the client controller. The 'property name' 'dmas' and 'dma-names'
+ as required by the generic dma device tree binding helpers. The dma
+ names correspond 1:1 with the dma request ids in the dmas property.
+
+ Example: dmas = <&pdma0 12
+ &pdma1 11>;
+ dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
new file mode 100644
index 000000000..f69bcf5a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -0,0 +1,42 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <2>, used to represent the number of integer cells in
+the dmas property of client devices.
+
+Example:
+
+dma0: dma@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+ #dma-cells = <2>;
+};
+
+DMA clients connected to the Atmel DMA controller must use the format
+described in the dma.txt file, using a three-cell specifier for each channel:
+a phandle plus two integer cells.
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The memory interface (16 most significant bits), the peripheral interface
+(16 less significant bits).
+3. Parameters for the at91 DMA configuration register which are device
+dependent:
+ - bit 7-0: peripheral identifier for the hardware handshaking interface. The
+ identifier can be different for tx and rx.
+ - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
+
+Example:
+
+i2c0@i2c@f8010000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8010000 0x100>;
+ interrupts = <9 4 6>;
+ dmas = <&dma0 1 7>,
+ <&dma0 1 8>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
new file mode 100644
index 000000000..0eb2b3207
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -0,0 +1,54 @@
+* Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+* XDMA Controller
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+ <chip> compatible description:
+ - sama5d4: first SoC adding the XDMAC
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <1>, used to represent the number of integer cells in
+the dmas property of client devices.
+ - The 1st cell specifies the channel configuration register:
+ - bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ - bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+dma1: dma-controller@f0004000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0004000 0x200>;
+ interrupts = <50 4 0>;
+ #dma-cells = <1>;
+};
+
+
+* DMA clients
+DMA clients connected to the Atmel XDMA controller must use the format
+described in the dma.txt file, using a one-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. Channel configuration register. Configurable fields are:
+ - bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ - bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+i2c2: i2c@f8024000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8024000 0x4000>;
+ interrupts = <34 4 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(6))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
new file mode 100644
index 000000000..1396078d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
@@ -0,0 +1,57 @@
+* BCM2835 DMA controller
+
+The BCM2835 DMA controller has 16 channels in total.
+Only the lower 13 channels have an associated IRQ.
+Some arbitrary channels are used by the firmware
+(1,3,6,7 in the current firmware version).
+The channels 0,2 and 3 have special functionality
+and should not be used by the driver.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain the DMA interrupts associated
+ to the DMA channels in ascending order.
+- #dma-cells: Must be <1>, the cell in the dmas property of the
+ client device represents the DREQ number.
+- brcm,dma-channel-mask: Bit mask representing the channels
+ not used by the firmware in ascending order,
+ i.e. first channel corresponds to LSB.
+
+Example:
+
+dma: dma@7e007000 {
+ compatible = "brcm,bcm2835-dma";
+ reg = <0x7e007000 0xf00>;
+ interrupts = <1 16>,
+ <1 17>,
+ <1 18>,
+ <1 19>,
+ <1 20>,
+ <1 21>,
+ <1 22>,
+ <1 23>,
+ <1 24>,
+ <1 25>,
+ <1 26>,
+ <1 27>,
+ <1 28>;
+
+ #dma-cells = <1>;
+ brcm,dma-channel-mask = <0x7f35>;
+};
+
+DMA clients connected to the BCM2835 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each channel.
+
+Example:
+
+bcm2835_i2s: i2s@7e203000 {
+ compatible = "brcm,bcm2835-i2s";
+ reg = < 0x7e203000 0x20>,
+ < 0x7e101098 0x02>;
+
+ dmas = <&dma 2>,
+ <&dma 3>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/dma.txt b/Documentation/devicetree/bindings/dma/dma.txt
new file mode 100644
index 000000000..82104271e
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma.txt
@@ -0,0 +1,81 @@
+* Generic DMA Controller and DMA request bindings
+
+Generic binding to provide a way for a driver using DMA Engine to retrieve the
+DMA request or channel information that goes from a hardware device to a DMA
+controller.
+
+
+* DMA controller
+
+Required property:
+- #dma-cells: Must be at least 1. Used to provide DMA controller
+ specific information. See DMA client binding below for
+ more details.
+
+Optional properties:
+- dma-channels: Number of DMA channels supported by the controller.
+- dma-requests: Number of DMA request signals supported by the
+ controller.
+
+Example:
+
+ dma: dma@48000000 {
+ compatible = "ti,omap-sdma";
+ reg = <0x48000000 0x1000>;
+ interrupts = <0 12 0x4
+ 0 13 0x4
+ 0 14 0x4
+ 0 15 0x4>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <127>;
+ };
+
+
+* DMA client
+
+Client drivers should specify the DMA property using a phandle to the controller
+followed by DMA controller specific data.
+
+Required property:
+- dmas: List of one or more DMA specifiers, each consisting of
+ - A phandle pointing to DMA controller node
+ - A number of integer cells, as determined by the
+ #dma-cells property in the node referenced by phandle
+ containing DMA controller specific information. This
+ typically contains a DMA request line number or a
+ channel number, but can contain any data that is
+ required for configuring a channel.
+- dma-names: Contains one identifier string for each DMA specifier in
+ the dmas property. The specific strings that can be used
+ are defined in the binding of the DMA client device.
+ Multiple DMA specifiers can be used to represent
+ alternatives and in this case the dma-names for those
+ DMA specifiers must be identical (see examples).
+
+Examples:
+
+1. A device with one DMA read channel, one DMA write channel:
+
+ i2c1: i2c@1 {
+ ...
+ dmas = <&dma 2 /* read channel */
+ &dma 3>; /* write channel */
+ dma-names = "rx", "tx";
+ ...
+ };
+
+2. A single read-write channel with three alternative DMA controllers:
+
+ dmas = <&dma1 5
+ &dma2 7
+ &dma3 2>;
+ dma-names = "rx-tx", "rx-tx", "rx-tx";
+
+3. A device with three channels, one of which has two alternatives:
+
+ dmas = <&dma1 2 /* read channel */
+ &dma1 3 /* write channel */
+ &dma2 0 /* error read */
+ &dma3 0>; /* alternative error read */
+ dma-names = "rx", "tx", "error", "error";
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
new file mode 100644
index 000000000..191d7bd8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt
@@ -0,0 +1,76 @@
+* Freescale enhanced Direct Memory Access(eDMA) Controller
+
+ The eDMA channels have multiplex capability by programmble memory-mapped
+registers. channels are split into two groups, called DMAMUX0 and DMAMUX1,
+specific DMA request source can only be multiplexed by any channel of certain
+group, DMAMUX0 or DMAMUX1, but not both.
+
+* eDMA Controller
+Required properties:
+- compatible :
+ - "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
+- reg : Specifies base physical address(s) and size of the eDMA registers.
+ The 1st region is eDMA control register's address and size.
+ The 2nd and the 3rd regions are programmable channel multiplexing
+ control register's address and size.
+- interrupts : A list of interrupt-specifiers, one for each entry in
+ interrupt-names.
+- interrupt-names : Should contain:
+ "edma-tx" - the transmission interrupt
+ "edma-err" - the error interrupt
+- #dma-cells : Must be <2>.
+ The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1).
+ Specific request source can only be multiplexed by specific channels
+ group called DMAMUX.
+ The 2nd cell specifies the request source(slot) ID.
+ See the SoC's reference manual for all the supported request sources.
+- dma-channels : Number of channels supported by the controller
+- clock-names : A list of channel group clock names. Should contain:
+ "dmamux0" - clock name of mux0 group
+ "dmamux1" - clock name of mux1 group
+- clocks : A list of phandle and clock-specifier pairs, one for each entry in
+ clock-names.
+
+Optional properties:
+- big-endian: If present registers and hardware scatter/gather descriptors
+ of the eDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+
+Examples:
+
+edma0: dma-controller@40018000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40018000 0x2000>,
+ <0x40024000 0x1000>,
+ <0x40025000 0x1000>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX0>,
+ <&clks VF610_CLK_DMAMUX1>;
+};
+
+
+* DMA clients
+DMA client drivers that uses the DMA function must use the format described
+in the dma.txt file, using a two-cell specifier for each channel: the 1st
+specifies the channel group(DMAMUX) in which this request can be multiplexed,
+and the 2nd specifies the request source.
+
+Examples:
+
+sai2: sai@40031000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40031000 0x1000>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "sai";
+ clocks = <&clks VF610_CLK_SAI2>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 0 21>,
+ <&edma0 0 20>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
new file mode 100644
index 000000000..7bd8847d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -0,0 +1,48 @@
+* Freescale Direct Memory Access (DMA) Controller for i.MX
+
+This document will only describe differences to the generic DMA Controller and
+DMA request bindings as described in dma/dma.txt .
+
+* DMA controller
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27
+- reg : Should contain DMA registers location and length
+- interrupts : First item should be DMA interrupt, second one is optional and
+ should contain DMA Error interrupt
+- #dma-cells : Has to be 1. imx-dma does not support anything else.
+
+Optional properties:
+- #dma-channels : Number of DMA channels supported. Should be 16.
+- #dma-requests : Number of DMA requests supported.
+
+Example:
+
+ dma: dma@10001000 {
+ compatible = "fsl,imx27-dma";
+ reg = <0x10001000 0x1000>;
+ interrupts = <32 33>;
+ #dma-cells = <1>;
+ #dma-channels = <16>;
+ };
+
+
+* DMA client
+
+Clients have to specify the DMA requests with phandles in a list.
+
+Required properties:
+- dmas: List of one or more DMA request specifiers. One DMA request specifier
+ consists of a phandle to the DMA controller followed by the integer
+ specifying the request line.
+- dma-names: List of string identifiers for the DMA requests. For the correct
+ names, have a look at the specific client driver.
+
+Example:
+
+ sdhci1: sdhci@10013000 {
+ ...
+ dmas = <&dma 7>;
+ dma-names = "rx-tx";
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
new file mode 100644
index 000000000..c6e72501a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -0,0 +1,85 @@
+* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+Required properties:
+- compatible : Should be one of
+ "fsl,imx25-sdma"
+ "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
+ "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
+ "fsl,imx51-sdma"
+ "fsl,imx53-sdma"
+ "fsl,imx6q-sdma"
+ The -to variants should be preferred since they allow to determine the
+ correct ROM script addresses needed for the driver to work without additional
+ firmware.
+- reg : Should contain SDMA registers location and length
+- interrupts : Should contain SDMA interrupt
+- #dma-cells : Must be <3>.
+ The first cell specifies the DMA request/event ID. See details below
+ about the second and third cell.
+- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
+ scripts firmware
+
+The second cell of dma phandle specifies the peripheral type of DMA transfer.
+The full ID of peripheral types can be found below.
+
+ ID transfer type
+ ---------------------
+ 0 MCU domain SSI
+ 1 Shared SSI
+ 2 MMC
+ 3 SDHC
+ 4 MCU domain UART
+ 5 Shared UART
+ 6 FIRI
+ 7 MCU domain CSPI
+ 8 Shared CSPI
+ 9 SIM
+ 10 ATA
+ 11 CCM
+ 12 External peripheral
+ 13 Memory Stick Host Controller
+ 14 Shared Memory Stick Host Controller
+ 15 DSP
+ 16 Memory
+ 17 FIFO type Memory
+ 18 SPDIF
+ 19 IPU Memory
+ 20 ASRC
+ 21 ESAI
+ 22 SSI Dual FIFO (needs firmware ver >= 2)
+ 23 Shared ASRC
+ 24 SAI
+
+The third cell specifies the transfer priority as below.
+
+ ID transfer priority
+ -------------------------
+ 0 High
+ 1 Medium
+ 2 Low
+
+Examples:
+
+sdma@83fb0000 {
+ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+ reg = <0x83fb0000 0x4000>;
+ interrupts = <6>;
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
+};
+
+DMA clients connected to the i.MX SDMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+ssi2: ssi@70014000 {
+ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+ reg = <0x70014000 0x4000>;
+ interrupts = <30>;
+ clocks = <&clks 49>;
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+};
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
new file mode 100644
index 000000000..e30e184f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -0,0 +1,60 @@
+* Freescale MXS DMA
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
+- reg : Should contain registers location and length
+- interrupts : Should contain the interrupt numbers of DMA channels.
+ If a channel is empty/reserved, 0 should be filled in place.
+- #dma-cells : Must be <1>. The number cell specifies the channel ID.
+- dma-channels : Number of channels supported by the DMA controller
+
+Optional properties:
+- interrupt-names : Name of DMA channel interrupts
+
+Supported chips:
+imx23, imx28.
+
+Examples:
+
+dma_apbh: dma-apbh@80004000 {
+ compatible = "fsl,imx28-dma-apbh";
+ reg = <0x80004000 0x2000>;
+ interrupts = <82 83 84 85
+ 88 88 88 88
+ 88 88 88 88
+ 87 86 0 0>;
+ interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+ "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+ "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+ "hsadc", "lcdif", "empty", "empty";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+};
+
+dma_apbx: dma-apbx@80024000 {
+ compatible = "fsl,imx28-dma-apbx";
+ reg = <0x80024000 0x2000>;
+ interrupts = <78 79 66 0
+ 80 81 68 69
+ 70 71 72 73
+ 74 75 76 77>;
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
+ "saif0", "saif1", "i2c0", "i2c1",
+ "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+ "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+};
+
+DMA clients connected to the MXS DMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/dma/img-mdc-dma.txt b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
new file mode 100644
index 000000000..28c1341db
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+ node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+ The maximum burst size is this value multiplied by the hardware-reported bus
+ width.
+- #dma-cells: Must be 3:
+ - The first cell is the peripheral's DMA request line.
+ - The second cell is a bitmap specifying to which channels the DMA request
+ line may be mapped (i.e. bit N set indicates channel N is usable).
+ - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32. If not specified
+ the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+ compatible = "img,pistachio-mdc-dma";
+ reg = <0x18143000 0x1000>;
+ interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>;
+ clock-names = "sys";
+
+ img,max-burst-multiplier = <16>;
+ img,cr-periph = <&cr_periph>;
+
+ #dma-cells = <3>;
+};
+
+spi@18100f00 {
+ ...
+ dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+ dma-names = "tx", "rx";
+ ...
+};
diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
new file mode 100644
index 000000000..f25feee62
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
@@ -0,0 +1,56 @@
+* Ingenic JZ4780 DMA Controller
+
+Required properties:
+
+- compatible: Should be "ingenic,jz4780-dma"
+- reg: Should contain the DMA controller registers location and length.
+- interrupts: Should contain the interrupt specifier of the DMA controller.
+- interrupt-parent: Should be the phandle of the interrupt controller that
+- clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
+- #dma-cells: Must be <2>. Number of integer cells in the dmas property of
+ DMA clients (see below).
+
+Optional properties:
+
+- ingenic,reserved-channels: Bitmask of channels to reserve for devices that
+ need a specific channel. These channels will only be assigned when explicitly
+ requested by a client. The primary use for this is channels 0 and 1, which
+ can be configured to have special behaviour for NAND/BCH when using
+ programmable firmware.
+
+Example:
+
+dma: dma@13420000 {
+ compatible = "ingenic,jz4780-dma";
+ reg = <0x13420000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu JZ4780_CLK_PDMA>;
+
+ #dma-cells = <2>;
+
+ ingenic,reserved-channels = <0x3>;
+};
+
+DMA clients must use the format described in dma.txt, giving a phandle to the
+DMA controller plus the following 2 integer cells:
+
+1. Request type: The DMA request type for transfers to/from the device on
+ the allocated channel, as defined in the SoC documentation.
+
+2. Channel: If set to 0xffffffff, any available channel will be allocated for
+ the client. Otherwise, the exact channel specified will be used. The channel
+ should be reserved on the DMA controller using the ingenic,reserved-channels
+ property.
+
+Example:
+
+uart0: serial@10030000 {
+ ...
+ dmas = <&dma 0x14 0xffffffff
+ &dma 0x15 0xffffffff>;
+ dma-names = "tx", "rx";
+ ...
+};
diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
new file mode 100644
index 000000000..23f8d712c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -0,0 +1,46 @@
+* Hisilicon K3 DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Should be "hisilicon,k3-dma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: see dma.txt, should be 1, para number
+- dma-channels: physical channels supported
+- dma-requests: virtual channels supported, each virtual channel
+ have specific request line
+- clocks: clock required
+
+Example:
+
+Controller:
+ dma0: dma@fcd02000 {
+ compatible = "hisilicon,k3-dma-1.0";
+ reg = <0xfcd02000 0x1000>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ dma-requests = <27>;
+ interrupts = <0 12 4>;
+ clocks = <&pclk>;
+ status = "disable";
+ };
+
+Client:
+Use specific request line passing from dmax
+For example, i2c0 read channel request line is 18, while write channel use 19
+
+ i2c0: i2c@fcb08000 {
+ compatible = "snps,designware-i2c";
+ dmas = <&dma0 18 /* read channel */
+ &dma0 19>; /* write channel */
+ dma-names = "rx", "tx";
+ };
+
+ i2c1: i2c@fcb09000 {
+ compatible = "snps,designware-i2c";
+ dmas = <&dma0 20 /* read channel */
+ &dma0 21>; /* write channel */
+ dma-names = "rx", "tx";
+ };
+
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
new file mode 100644
index 000000000..7a802f64e
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt
@@ -0,0 +1,77 @@
+* MARVELL MMP DMA controller
+
+Marvell Peripheral DMA Controller
+Used platforms: pxa688, pxa910, pxa3xx, etc
+
+Required properties:
+- compatible: Should be "marvell,pdma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Either contain all of the per-channel DMA interrupts
+ or one irq for pdma device
+
+Optional properties:
+- #dma-channels: Number of DMA channels supported by the controller (defaults
+ to 32 when not specified)
+
+"marvell,pdma-1.0"
+Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
+
+Examples:
+
+/*
+ * Each channel has specific irq
+ * ICU parse out irq channel from ICU register,
+ * while DMA controller may not able to distinguish the irq channel
+ * Using this method, interrupt-parent is required as demuxer
+ * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
+ * 18~21 is ADMA irq
+ */
+pdma: dma-controller@d4000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0xd4000000 0x10000>;
+ interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+ interrupt-parent = <&intcmux32>;
+ #dma-channels = <16>;
+ };
+
+/*
+ * One irq for all channels
+ * Dmaengine driver (DMA controller) distinguish irq channel via
+ * parsing internal register
+ */
+pdma: dma-controller@d4000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0xd4000000 0x10000>;
+ interrupts = <47>;
+ #dma-channels = <16>;
+ };
+
+
+Marvell Two Channel DMA Controller used specifically for audio
+Used platforms: pxa688, pxa910
+
+Required properties:
+- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
+- reg: Should contain DMA registers location and length.
+- interrupts: Either contain all of the per-channel DMA interrupts
+ or one irq for dma device
+
+"marvell,adma-1.0" used on pxa688
+"marvell,pxa910-squ" used on pxa910
+
+Examples:
+
+/* each channel has specific irq */
+adma0: dma-controller@d42a0800 {
+ compatible = "marvell,adma-1.0";
+ reg = <0xd42a0800 0x100>;
+ interrupts = <18 19>;
+ interrupt-parent = <&intcmux32>;
+ };
+
+/* One irq for all channels */
+squ: dma-controller@d42a0800 {
+ compatible = "marvell,pxa910-squ";
+ reg = <0xd42a0800 0x100>;
+ interrupts = <46>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
new file mode 100644
index 000000000..8a9f35593
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -0,0 +1,45 @@
+MOXA ART DMA Controller
+
+See dma.txt first
+
+Required properties:
+
+- compatible : Must be "moxa,moxart-dma"
+- reg : Should contain registers location and length
+- interrupts : Should contain an interrupt-specifier for the sole
+ interrupt generated by the device
+- #dma-cells : Should be 1, a single cell holding a line request number
+
+Example:
+
+ dma: dma@90500000 {
+ compatible = "moxa,moxart-dma";
+ reg = <0x90500080 0x40>;
+ interrupts = <24 0>;
+ #dma-cells = <1>;
+ };
+
+
+Clients:
+
+DMA clients connected to the MOXA ART DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each channel:
+a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. Peripheral identifier for the hardware handshaking interface.
+
+Example:
+Use specific request line passing from dma
+For example, MMC request line is 5
+
+ sdhci: sdhci@98e00000 {
+ compatible = "moxa,moxart-sdhci";
+ reg = <0x98e00000 0x5C>;
+ interrupts = <5 0>;
+ clocks = <&clk_apb>;
+ dmas = <&dma 5>,
+ <&dma 5>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
new file mode 100644
index 000000000..a6511df16
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+ is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+ Each channel of this DMA controller has a peripheral request line,
+ the assignment is fixed in hardware. This one cell
+ in dmas property of a client device represents the channel number.
+
+Example:
+
+ dma0: dma@14000 {
+ compatible = "fsl,mpc5121-dma";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ #dma-cells = <1>;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
new file mode 100644
index 000000000..7c6cb7fce
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mv-xor.txt
@@ -0,0 +1,40 @@
+* Marvell XOR engines
+
+Required properties:
+- compatible: Should be "marvell,orion-xor"
+- reg: Should contain registers location and length (two sets)
+ the first set is the low registers, the second set the high
+ registers for the XOR engine.
+- clocks: pointer to the reference clock
+
+The DT node must also contains sub-nodes for each XOR channel that the
+XOR engine has. Those sub-nodes have the following required
+properties:
+- interrupts: interrupt of the XOR channel
+
+And the following optional properties:
+- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
+- dmacap,memset to indicate that the XOR channel is capable of memset operations
+- dmacap,xor to indicate that the XOR channel is capable of xor operations
+
+Example:
+
+xor@d0060900 {
+ compatible = "marvell,orion-xor";
+ reg = <0xd0060900 0x100
+ 0xd0060b00 0x100>;
+ clocks = <&coreclk 0>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <51>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <52>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+};
diff --git a/Documentation/devicetree/bindings/dma/nbpfaxi.txt b/Documentation/devicetree/bindings/dma/nbpfaxi.txt
new file mode 100644
index 000000000..d5e2522b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nbpfaxi.txt
@@ -0,0 +1,61 @@
+* Renesas "Type-AXI" NBPFAXI* DMA controllers
+
+* DMA controller
+
+Required properties
+
+- compatible: must be one of
+ "renesas,nbpfaxi64dmac1b4"
+ "renesas,nbpfaxi64dmac1b8"
+ "renesas,nbpfaxi64dmac1b16"
+ "renesas,nbpfaxi64dmac4b4"
+ "renesas,nbpfaxi64dmac4b8"
+ "renesas,nbpfaxi64dmac4b16"
+ "renesas,nbpfaxi64dmac8b4"
+ "renesas,nbpfaxi64dmac8b8"
+ "renesas,nbpfaxi64dmac8b16"
+- #dma-cells: must be 2: the first integer is a terminal number, to which this
+ slave is connected, the second one is flags. Flags is a bitmask
+ with the following bits defined:
+
+#define NBPF_SLAVE_RQ_HIGH 1
+#define NBPF_SLAVE_RQ_LOW 2
+#define NBPF_SLAVE_RQ_LEVEL 4
+
+Optional properties:
+
+You can use dma-channels and dma-requests as described in dma.txt, although they
+won't be used, this information is derived from the compatibility string.
+
+Example:
+
+ dma: dma-controller@48000000 {
+ compatible = "renesas,nbpfaxi64dmac8b4";
+ reg = <0x48000000 0x400>;
+ interrupts = <0 12 0x4
+ 0 13 0x4
+ 0 14 0x4
+ 0 15 0x4
+ 0 16 0x4
+ 0 17 0x4
+ 0 18 0x4
+ 0 19 0x4>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <8>;
+ };
+
+* DMA client
+
+Required properties:
+
+dmas and dma-names are required, as described in dma.txt.
+
+Example:
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+...
+ dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)
+ &dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+ dma-names = "rx", "tx";
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
new file mode 100644
index 000000000..9bcab9115
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -0,0 +1,62 @@
+QCOM ADM DMA Controller
+
+Required properties:
+- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
+- reg: Address range for DMA registers
+- interrupts: Should contain one interrupt shared by all channels
+- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
+ denotes CRCI (client rate control interface) flow control assignment.
+- clocks: Should contain the core clock and interface clock.
+- clock-names: Must contain "core" for the core clock and "iface" for the
+ interface clock.
+- resets: Must contain an entry for each entry in reset names.
+- reset-names: Must include the following entries:
+ - clk
+ - c0
+ - c1
+ - c2
+- qcom,ee: indicates the security domain identifier used in the secure world.
+
+Example:
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+ #dma-cells = <2>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "c0", "c1", "c2";
+ qcom,ee = <0>;
+ };
+
+DMA clients must use the format descripted in the dma.txt file, using a three
+cell specifier for each channel.
+
+Each dmas request consists of 3 cells:
+ 1. phandle pointing to the DMA controller
+ 2. channel number
+ 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
+ The CRCI is used for flow control. It identifies the peripheral device that
+ is the source/destination for the transferred data.
+
+Example:
+
+ spi4: spi@1a280000 {
+ status = "ok";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ dmas = <&adm_dma 6 9>,
+ <&adm_dma 5 10>;
+ dma-names = "rx", "tx";
+ };
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
new file mode 100644
index 000000000..1c9d48ea4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
@@ -0,0 +1,44 @@
+QCOM BAM DMA controller
+
+Required properties:
+- compatible: must be one of the following:
+ * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
+ * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
+ * "qcom,bam-v1.7.0" for MSM8916
+- reg: Address range for DMA registers
+- interrupts: Should contain the one interrupt shared by all channels
+- #dma-cells: must be <1>, the cell in the dmas property of the client device
+ represents the channel number
+- clocks: required clock
+- clock-names: must contain "bam_clk" entry
+- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
+ the secure world.
+
+Example:
+
+ uart-bam: dma@f9984000 = {
+ compatible = "qcom,bam-v1.4.0";
+ reg = <0xf9984000 0x15000>;
+ interrupts = <0 94 0>;
+ clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+DMA clients must use the format described in the dma.txt file, using a two cell
+specifier for each channel.
+
+Example:
+ serial@f991e000 {
+ compatible = "qcom,msm-uart";
+ reg = <0xf991e000 0x1000>
+ <0xf9944000 0x19000>;
+ interrupts = <0 108 0>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ dmas = <&uart-bam 0>, <&uart-bam 1>;
+ dma-names = "rx", "tx";
+ };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
new file mode 100644
index 000000000..09daeef1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -0,0 +1,95 @@
+* Renesas R-Car DMA Controller Device Tree bindings
+
+Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA
+controller instances named DMAC capable of serving multiple clients. Channels
+can be dedicated to specific clients or shared between a large number of
+clients.
+
+Each DMA client is connected to one dedicated port of the DMAC, identified by
+an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
+256 clients in total. When the number of hardware channels is lower than the
+number of clients to be served, channels must be shared between multiple DMA
+clients. The association of DMA clients to DMAC channels is fully dynamic and
+not described in these device tree bindings.
+
+Required Properties:
+
+- compatible: must contain "renesas,rcar-dmac"
+
+- reg: base address and length of the registers block for the DMAC
+
+- interrupts: interrupt specifiers for the DMAC, one for each entry in
+ interrupt-names.
+- interrupt-names: one entry per channel, named "ch%u", where %u is the
+ channel number ranging from zero to the number of channels minus one.
+
+- clock-names: "fck" for the functional clock
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+- clock-names: must contain "fck" for the functional clock.
+
+- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
+ connected to the DMA client
+- dma-channels: number of DMA channels
+
+Example: R8A7790 (R-Car H2) SYS-DMACs
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
new file mode 100644
index 000000000..040f36595
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
@@ -0,0 +1,37 @@
+* Renesas USB DMA Controller Device Tree bindings
+
+Required Properties:
+- compatible: must contain "renesas,usb-dmac"
+- reg: base address and length of the registers block for the DMAC
+- interrupts: interrupt specifiers for the DMAC, one for each entry in
+ interrupt-names.
+- interrupt-names: one entry per channel, named "ch%u", where %u is the
+ channel number ranging from zero to the number of channels minus one.
+- clocks: a list of phandle + clock-specifier pairs.
+- #dma-cells: must be <1>, the cell specifies the channel number of the DMAC
+ port connected to the DMA client.
+- dma-channels: number of DMA channels
+
+Example: R8A7790 (R-Car H2) USB-DMACs
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
+ 0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
+ 0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/shdma.txt b/Documentation/devicetree/bindings/dma/shdma.txt
new file mode 100644
index 000000000..2a3f3b894
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/shdma.txt
@@ -0,0 +1,84 @@
+* SHDMA Device Tree bindings
+
+Sh-/r-mobile and r-car systems often have multiple identical DMA controller
+instances, capable of serving any of a common set of DMA slave devices, using
+the same configuration. To describe this topology we require all compatible
+SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible
+DMAC instances have the same number of channels and use the same DMA
+descriptors. Therefore respective DMA DT bindings can also all be placed in the
+multiplexer node. Even if there is only one such DMAC instance on a system, it
+still has to be placed under such a multiplexer node.
+
+* DMA multiplexer
+
+Required properties:
+- compatible: should be "renesas,shdma-mux"
+- #dma-cells: should be <1>, see "dmas" property below
+
+Optional properties (currently unused):
+- dma-channels: number of DMA channels
+- dma-requests: number of DMA request signals
+
+* DMA controller
+
+Required properties:
+- compatible: should be of the form "renesas,shdma-<soc>", where <soc> should
+ be replaced with the desired SoC model, e.g.
+ "renesas,shdma-r8a73a4" for the system DMAC on r8a73a4 SoC
+
+Example:
+ dmac: dma-multiplexer@0 {
+ compatible = "renesas,shdma-mux";
+ #dma-cells = <1>;
+ dma-channels = <20>;
+ dma-requests = <256>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dma0: dma-controller@e6700020 {
+ compatible = "renesas,shdma-r8a73a4";
+ reg = <0 0xe6700020 0 0x89e0>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 220 4
+ 0 200 4
+ 0 201 4
+ 0 202 4
+ 0 203 4
+ 0 204 4
+ 0 205 4
+ 0 206 4
+ 0 207 4
+ 0 208 4
+ 0 209 4
+ 0 210 4
+ 0 211 4
+ 0 212 4
+ 0 213 4
+ 0 214 4
+ 0 215 4
+ 0 216 4
+ 0 217 4
+ 0 218 4
+ 0 219 4>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19";
+ };
+ };
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[DMA multiplexer phandle] [MID/RID value]> pairs,
+ where MID/RID values are fixed handles, specified in the SoC
+ manual
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+ dmas = <&dmac 0xd1
+ &dmac 0xd2>;
+ dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt b/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt
new file mode 100644
index 000000000..ecbc96ad3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt
@@ -0,0 +1,43 @@
+* CSR SiRFSoC DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Should be "sirf,prima2-dmac" or "sirf,marco-dmac"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: must be <1>. used to represent the number of integer
+ cells in the dmas property of client device.
+- clocks: clock required
+
+Example:
+
+Controller:
+dmac0: dma-controller@b00b0000 {
+ compatible = "sirf,prima2-dmac";
+ reg = <0xb00b0000 0x10000>;
+ interrupts = <12>;
+ clocks = <&clks 24>;
+ #dma-cells = <1>;
+};
+
+
+Client:
+Fill the specific dma request line in dmas. In the below example, spi0 read
+channel request line is 9 of the 2nd dma controller, while write channel uses
+4 of the 2nd dma controller; spi1 read channel request line is 12 of the 1st
+dma controller, while write channel uses 13 of the 1st dma controller:
+
+spi0: spi@b00d0000 {
+ compatible = "sirf,prima2-spi";
+ dmas = <&dmac1 9>,
+ <&dmac1 4>;
+ dma-names = "rx", "tx";
+};
+
+spi1: spi@b0170000 {
+ compatible = "sirf,prima2-spi";
+ dmas = <&dmac0 12>,
+ <&dmac0 13>;
+ dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
new file mode 100644
index 000000000..c26159816
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -0,0 +1,63 @@
+* Synopsys Designware DMA Controller
+
+Required properties:
+- compatible: "snps,dma-spear1340"
+- reg: Address range of the DMAC registers
+- interrupt: Should contain the DMAC interrupt number
+- dma-channels: Number of channels supported by hardware
+- dma-requests: Number of DMA request lines supported, up to 16
+- dma-masters: Number of AHB masters supported by the controller
+- #dma-cells: must be <3>
+- chan_allocation_order: order of allocation of channel, 0 (default): ascending,
+ 1: descending
+- chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1:
+ increase from chan n->0
+- block_size: Maximum block size supported by the controller
+- data_width: Maximum data width supported by hardware per AHB master
+ (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
+
+
+Optional properties:
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- is_private: The device channels should be marked as private and not for by the
+ general purpose DMA channel allocator. False if not passed.
+
+Example:
+
+ dmahost: dma@fc000000 {
+ compatible = "snps,dma-spear1340";
+ reg = <0xfc000000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <12>;
+
+ dma-channels = <8>;
+ dma-requests = <16>;
+ dma-masters = <2>;
+ #dma-cells = <3>;
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+ block_size = <0xfff>;
+ data_width = <3 3>;
+ };
+
+DMA clients connected to the Designware DMA controller must use the format
+described in the dma.txt file, using a four-cell specifier for each channel.
+The four cells in order are:
+
+1. A phandle pointing to the DMA controller
+2. The DMA request line number
+3. Source master for transfers on allocated channel
+4. Destination master for transfers on allocated channel
+
+Example:
+
+ serial@e0000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xe0000000 0x1000>;
+ interrupts = <0 35 0x4>;
+ status = "disabled";
+ dmas = <&dmahost 12 0 1>,
+ <&dmahost 13 0 1 0>;
+ dma-names = "rx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/dma/ste-coh901318.txt b/Documentation/devicetree/bindings/dma/ste-coh901318.txt
new file mode 100644
index 000000000..091ad057e
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ste-coh901318.txt
@@ -0,0 +1,32 @@
+ST-Ericsson COH 901 318 DMA Controller
+
+This is a DMA controller which has begun as a fork of the
+ARM PL08x PrimeCell VHDL code.
+
+Required properties:
+- compatible: should be "stericsson,coh901318"
+- reg: register locations and length
+- interrupts: the single DMA IRQ
+- #dma-cells: must be set to <1>, as the channels on the
+ COH 901 318 are simple and identified by a single number
+- dma-channels: the number of DMA channels handled
+
+Example:
+
+dmac: dma-controller@c00020000 {
+ compatible = "stericsson,coh901318";
+ reg = <0xc0020000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <2>;
+ #dma-cells = <1>;
+ dma-channels = <40>;
+};
+
+Consumers example:
+
+uart0: serial@c0013000 {
+ compatible = "...";
+ (...)
+ dmas = <&dmac 17 &dmac 18>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
new file mode 100644
index 000000000..95800ab37
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -0,0 +1,139 @@
+* DMA40 DMA Controller
+
+Required properties:
+- compatible: "stericsson,dma40"
+- reg: Address range of the DMAC registers
+- reg-names: Names of the above areas to use during resource look-up
+- interrupt: Should contain the DMAC interrupt number
+- #dma-cells: must be <3>
+- memcpy-channels: Channels to be used for memcpy
+
+Optional properties:
+- dma-channels: Number of channels supported by hardware - if not present
+ the driver will attempt to obtain the information from H/W
+- disabled-channels: Channels which can not be used
+
+Example:
+
+ dma: dma-controller@801C0000 {
+ compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+ reg = <0x801C0000 0x1000 0x40010000 0x800>;
+ reg-names = "base", "lcpa";
+ interrupt-parent = <&intc>;
+ interrupts = <0 25 0x4>;
+
+ #dma-cells = <2>;
+ memcpy-channels = <56 57 58 59 60>;
+ disabled-channels = <12>;
+ dma-channels = <8>;
+ };
+
+Clients
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+ 1. A phandle pointing to the DMA controller
+ 2. Device signal number, the signal line for single and burst requests
+ connected from the device to the DMA40 engine
+ 3. The DMA request line number (only when 'use fixed channel' is set)
+ 4. A 32bit mask specifying; mode, direction and endianness
+ [NB: This list will grow]
+ 0x00000001: Mode:
+ Logical channel when unset
+ Physical channel when set
+ 0x00000002: Direction:
+ Memory to Device when unset
+ Device to Memory when set
+ 0x00000004: Endianness:
+ Little endian when unset
+ Big endian when set
+ 0x00000008: Use fixed channel:
+ Use automatic channel selection when unset
+ Use DMA request line number when set
+ 0x00000010: Set channel as high priority:
+ Normal priority when unset
+ High priority when set
+
+Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
+bidirectional, i.e. the same for RX and TX operations:
+
+0: SPI controller 0
+1: SD/MMC controller 0 (unused)
+2: SD/MMC controller 1 (unused)
+3: SD/MMC controller 2 (unused)
+4: I2C port 1
+5: I2C port 3
+6: I2C port 2
+7: I2C port 4
+8: Synchronous Serial Port SSP0
+9: Synchronous Serial Port SSP1
+10: Multi-Channel Display Engine MCDE RX
+11: UART port 2
+12: UART port 1
+13: UART port 0
+14: Multirate Serial Port MSP2
+15: I2C port 0
+16: USB OTG in/out endpoints 7 & 15
+17: USB OTG in/out endpoints 6 & 14
+18: USB OTG in/out endpoints 5 & 13
+19: USB OTG in/out endpoints 4 & 12
+20: SLIMbus or HSI channel 0
+21: SLIMbus or HSI channel 1
+22: SLIMbus or HSI channel 2
+23: SLIMbus or HSI channel 3
+24: Multimedia DSP SXA0
+25: Multimedia DSP SXA1
+26: Multimedia DSP SXA2
+27: Multimedia DSP SXA3
+28: SD/MM controller 2
+29: SD/MM controller 0
+30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+31: MSP port 0 or SLIMbus channel 0
+32: SD/MM controller 1
+33: SPI controller 2
+34: i2c3 RX2 TX2
+35: SPI controller 1
+36: USB OTG in/out endpoints 3 & 11
+37: USB OTG in/out endpoints 2 & 10
+38: USB OTG in/out endpoints 1 & 9
+39: USB OTG in/out endpoints 8
+40: SPI controller 3
+41: SD/MM controller 3
+42: SD/MM controller 4
+43: SD/MM controller 5
+44: Multimedia DSP SXA4
+45: Multimedia DSP SXA5
+46: SLIMbus channel 8 or Multimedia DSP SXA6
+47: SLIMbus channel 9 or Multimedia DSP SXA7
+48: Crypto Accelerator 1
+49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+50: Hash Accelerator 1 TX
+51: memcpy TX (to be used by the DMA driver for memcpy operations)
+52: SLIMbus or HSI channel 4
+53: SLIMbus or HSI channel 5
+54: SLIMbus or HSI channel 6
+55: SLIMbus or HSI channel 7
+56: memcpy (to be used by the DMA driver for memcpy operations)
+57: memcpy (to be used by the DMA driver for memcpy operations)
+58: memcpy (to be used by the DMA driver for memcpy operations)
+59: memcpy (to be used by the DMA driver for memcpy operations)
+60: memcpy (to be used by the DMA driver for memcpy operations)
+61: Crypto Accelerator 0
+62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+63: Hash Accelerator 0 TX
+
+Example:
+
+ uart@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 0x4>;
+
+ dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+ <&dma 13 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "rx";
+
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
new file mode 100644
index 000000000..9cdcba24d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -0,0 +1,45 @@
+Allwinner A31 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma"
+- reg: Should contain the registers base address and length
+- interrupts: Should contain a reference to the interrupt used by this device
+- clocks: Should contain a reference to the parent AHB clock
+- resets: Should contain a reference to the reset controller asserting
+ this device in reset
+- #dma-cells : Should be 1, a single cell holding a line request number
+
+Example:
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun6i-a31-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ahb1_gates 6>;
+ resets = <&ahb1_rst 6>;
+ #dma-cells = <1>;
+ };
+
+Clients:
+
+DMA clients connected to the A31 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each
+channel: a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The port ID as specified in the datasheet
+
+Example:
+spi2: spi@01c6a000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c6a000 0x1000>;
+ interrupts = <0 67 4>;
+ clocks = <&ahb1_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 25>, <&dma 25>;
+ dma-names = "rx", "tx";
+ resets = <&ahb1_rst 22>;
+};
diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
new file mode 100644
index 000000000..c6908e7c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
@@ -0,0 +1,44 @@
+* NVIDIA Tegra APB DMA controller
+
+Required properties:
+- compatible: Should be "nvidia,<chip>-apbdma"
+- reg: Should contain DMA registers location and length. This shuld include
+ all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+ client nodes' dmas properties. The specifier represents the DMA request
+ select value for the peripheral. For more details, consult the Tegra TRM's
+ documentation of the APB DMA channel control register REQ_SEL field.
+
+Examples:
+
+apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04
+ 0 144 0x04
+ 0 145 0x04
+ 0 146 0x04
+ 0 147 0x04
+ 0 148 0x04
+ 0 149 0x04
+ 0 150 0x04
+ 0 151 0x04 >;
+ clocks = <&tegra_car 34>;
+ resets = <&tegra_car 34>;
+ reset-names = "dma";
+ #dma-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
new file mode 100644
index 000000000..5ba525a10
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -0,0 +1,35 @@
+TI EDMA
+
+Required properties:
+- compatible : "ti,edma3"
+- #dma-cells: Should be set to <1>
+ Clients should use a single channel number per DMA request.
+- reg: Memory map for accessing module
+- interrupt-parent: Interrupt controller the interrupt is routed through
+- interrupts: Exactly 3 interrupts need to be specified in the order:
+ 1. Transfer completion interrupt.
+ 2. Memory protection interrupt.
+ 3. Error interrupt.
+Optional properties:
+- ti,hwmods: Name of the hwmods associated to the EDMA
+- ti,edma-xbar-event-map: Crossbar event to channel map
+
+Deprecated properties:
+Listed here in case one wants to boot an old kernel with new DTB. These
+properties might need to be added to the new DTS files.
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- dma-channels: Specify total DMA channels per CC
+
+Example:
+
+edma: edma@49000000 {
+ reg = <0x49000000 0x10000>;
+ interrupt-parent = <&intc>;
+ interrupts = <12 13 14>;
+ compatible = "ti,edma3";
+ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+ #dma-cells = <1>;
+ ti,edma-xbar-event-map = /bits/ 16 <1 12
+ 2 13>;
+};
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
new file mode 100644
index 000000000..2291c4098
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -0,0 +1,65 @@
+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
+Required properties:
+- compatible: Should be "xlnx,axi-dma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain DMA registers location and length.
+- dma-channel child node: Should have atleast one channel and can have upto
+ two channels per device. This node specifies the properties of each
+ DMA channel (see child node properties below).
+
+Optional properties:
+- xlnx,include-sg: Tells whether configured for Scatter-mode in
+ the hardware.
+
+Required child node properties:
+- compatible: It should be either "xlnx,axi-dma-mm2s-channel" or
+ "xlnx,axi-dma-s2mm-channel".
+- interrupts: Should contain per channel DMA interrupts.
+- xlnx,datawidth: Should contain the stream data width, take values
+ {32,64...1024}.
+
+Option child node properties:
+- xlnx,include-dre: Tells whether hardware is configured for Data
+ Realignment Engine.
+
+Example:
+++++++++
+
+axi_dma_0: axidma@40400000 {
+ compatible = "xlnx,axi-dma-1.00.a";
+ #dma_cells = <1>;
+ reg = < 0x40400000 0x10000 >;
+ dma-channel@40400000 {
+ compatible = "xlnx,axi-dma-mm2s-channel";
+ interrupts = < 0 59 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+ dma-channel@40400030 {
+ compatible = "xlnx,axi-dma-s2mm-channel";
+ interrupts = < 0 58 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[DMA device phandle] [Channel ID]> pairs,
+ where Channel ID is '0' for write/tx and '1' for read/rx
+ channel.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+dmatest_0: dmatest@0 {
+ compatible ="xlnx,axi-dma-test-1.00.a";
+ dmas = <&axi_dma_0 0
+ &axi_dma_0 1>;
+ dma-names = "dma0", "dma1";
+} ;
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
new file mode 100644
index 000000000..e4c4d47f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -0,0 +1,75 @@
+Xilinx AXI VDMA engine, it does transfers between memory and video devices.
+It can be configured to have one channel or two channels. If configured
+as two channels, one is to transmit to the video device and another is
+to receive from the video device.
+
+Required properties:
+- compatible: Should be "xlnx,axi-vdma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain VDMA registers location and length.
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
+- dma-channel child node: Should have at least one channel and can have up to
+ two channels per device. This node specifies the properties of each
+ DMA channel (see child node properties below).
+
+Optional properties:
+- xlnx,include-sg: Tells configured for Scatter-mode in
+ the hardware.
+- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
+ It takes following values:
+ {1}, flush both channels
+ {2}, flush mm2s channel
+ {3}, flush s2mm channel
+
+Required child node properties:
+- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
+ "xlnx,axi-vdma-s2mm-channel".
+- interrupts: Should contain per channel VDMA interrupts.
+- xlnx,datawidth: Should contain the stream data width, take values
+ {32,64...1024}.
+
+Optional child node properties:
+- xlnx,include-dre: Tells hardware is configured for Data
+ Realignment Engine.
+- xlnx,genlock-mode: Tells Genlock synchronization is
+ enabled/disabled in hardware.
+
+Example:
+++++++++
+
+axi_vdma_0: axivdma@40030000 {
+ compatible = "xlnx,axi-vdma-1.00.a";
+ #dma_cells = <1>;
+ reg = < 0x40030000 0x10000 >;
+ xlnx,num-fstores = <0x8>;
+ xlnx,flush-fsync = <0x1>;
+ dma-channel@40030000 {
+ compatible = "xlnx,axi-vdma-mm2s-channel";
+ interrupts = < 0 54 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+ dma-channel@40030030 {
+ compatible = "xlnx,axi-vdma-s2mm-channel";
+ interrupts = < 0 53 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
+ where Channel ID is '0' for write/tx and '1' for read/rx
+ channel.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+vdmatest_0: vdmatest@0 {
+ compatible ="xlnx,axi-vdma-test-1.00.a";
+ dmas = <&axi_vdma_0 0
+ &axi_vdma_0 1>;
+ dma-names = "vdma0", "vdma1";
+} ;