2 files changed, 83 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt
new file mode 100644
index 000000000..96ec5179c
--- /dev/null
+++ b/Documentation/devicetree/bindings/fb/mxsfb.txt
@@ -0,0 +1,49 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-lcdif".  Supported chips include
+  imx23 and imx28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+- display : phandle to display node (see below for details)
+
+* display node
+
+Required properties:
+- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
+- bus-width : number of data lines.  Could be <8>, <16>, <18> or <24>.
+
+Required sub-node:
+- display-timings : Refer to binding doc display-timing.txt for details.
+
+Examples:
+
+lcdif@80030000 {
+	compatible = "fsl,imx28-lcdif";
+	reg = <0x80030000 2000>;
+	interrupts = <38 86>;
+
+	display: display {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <164>;
+				hback-porch = <89>;
+				hsync-len = <10>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/fb/sm501fb.txt b/Documentation/devicetree/bindings/fb/sm501fb.txt
new file mode 100644
index 000000000..9d9f00980
--- /dev/null
+++ b/Documentation/devicetree/bindings/fb/sm501fb.txt
@@ -0,0 +1,34 @@
+* SM SM501
+
+The SM SM501 is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "smi,sm501".
+- reg : contain two entries:
+    - First entry: System Configuration register
+    - Second entry: IO space (Display Controller register)
+- interrupts : SMI interrupt to the cpu should be described here.
+- interrupt-parent : the phandle for the interrupt controller that
+  services interrupts for this device.
+
+Optional properties:
+- mode : select a video mode:
+    <xres>x<yres>[-<bpp>][@<refresh>]
+- edid : verbatim EDID data block describing attached display.
+  Data from the detailed timing descriptor will be used to
+  program the display controller.
+- little-endian: available on big endian systems, to
+  set different foreign endian.
+- big-endian: available on little endian systems, to
+  set different foreign endian.
+
+Example for MPC5200:
+	display@1,0 {
+		compatible = "smi,sm501";
+		reg = <1 0x00000000 0x00800000
+		       1 0x03e00000 0x00200000>;
+		interrupts = <1 1 3>;
+		mode = "640x480-32@60";
+		edid = [edid-data];
+	};