summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/fb
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/fb')
-rw-r--r--Documentation/devicetree/bindings/fb/mxsfb.txt49
-rw-r--r--Documentation/devicetree/bindings/fb/sm501fb.txt34
2 files changed, 83 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt
new file mode 100644
index 000000000..96ec5179c
--- /dev/null
+++ b/Documentation/devicetree/bindings/fb/mxsfb.txt
@@ -0,0 +1,49 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-lcdif". Supported chips include
+ imx23 and imx28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+- display : phandle to display node (see below for details)
+
+* display node
+
+Required properties:
+- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
+- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>.
+
+Required sub-node:
+- display-timings : Refer to binding doc display-timing.txt for details.
+
+Examples:
+
+lcdif@80030000 {
+ compatible = "fsl,imx28-lcdif";
+ reg = <0x80030000 2000>;
+ interrupts = <38 86>;
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <164>;
+ hback-porch = <89>;
+ hsync-len = <10>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/fb/sm501fb.txt b/Documentation/devicetree/bindings/fb/sm501fb.txt
new file mode 100644
index 000000000..9d9f00980
--- /dev/null
+++ b/Documentation/devicetree/bindings/fb/sm501fb.txt
@@ -0,0 +1,34 @@
+* SM SM501
+
+The SM SM501 is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "smi,sm501".
+- reg : contain two entries:
+ - First entry: System Configuration register
+ - Second entry: IO space (Display Controller register)
+- interrupts : SMI interrupt to the cpu should be described here.
+- interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Optional properties:
+- mode : select a video mode:
+ <xres>x<yres>[-<bpp>][@<refresh>]
+- edid : verbatim EDID data block describing attached display.
+ Data from the detailed timing descriptor will be used to
+ program the display controller.
+- little-endian: available on big endian systems, to
+ set different foreign endian.
+- big-endian: available on little endian systems, to
+ set different foreign endian.
+
+Example for MPC5200:
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ interrupts = <1 1 3>;
+ mode = "640x480-32@60";
+ edid = [edid-data];
+ };