summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt')
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt20
1 files changed, 17 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
index 120bc4971..4b6cc632c 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -1,9 +1,10 @@
-* Freescale MPC512x/MPC8xxx/Layerscape GPIO controller
+* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
Required properties:
- compatible : Should be "fsl,<soc>-gpio"
The following <soc>s are known to be supported:
- mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq.
+ mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
+ ls1021a, ls1043a, ls2080a.
- reg : Address and length of the register set for the device
- interrupts : Should be the port interrupt shared by all 32 pins.
- #gpio-cells : Should be two. The first cell is the pin number and
@@ -15,7 +16,7 @@ Optional properties:
- little-endian : GPIO registers are used as little endian. If not
present registers are used as big endian by default.
-Example:
+Example of gpio-controller node for a mpc5125 SoC:
gpio0: gpio@1100 {
compatible = "fsl,mpc5125-gpio";
@@ -24,3 +25,16 @@ gpio0: gpio@1100 {
interrupts = <78 0x8>;
status = "okay";
};
+
+Example of gpio-controller node for a ls2080a SoC:
+
+gpio0: gpio@2300000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};