summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/media
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media')
-rw-r--r--Documentation/devicetree/bindings/media/exynos5-gsc.txt4
-rw-r--r--Documentation/devicetree/bindings/media/i2c/adp1653.txt7
-rw-r--r--Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt20
3 files changed, 18 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
index 0604d42f3..5fe9372ab 100644
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
@@ -7,6 +7,10 @@ Required properties:
- reg: should contain G-Scaler physical address location and length.
- interrupts: should contain G-Scaler interrupt number
+Optional properties:
+- samsung,sysreg: handle to syscon used to control the system registers to
+ set writeback input and destination
+
Example:
gsc_0: gsc@0x13e00000 {
diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
index 5ce66f210..4cce0de40 100644
--- a/Documentation/devicetree/bindings/media/i2c/adp1653.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
@@ -12,12 +12,13 @@ There are two LED outputs available - flash and indicator. One LED is
represented by one child node, nodes need to be named "flash" and "indicator".
Required properties of the LED child node:
-- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
Required properties of the flash LED child node:
- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
Example:
@@ -29,9 +30,9 @@ Example:
flash {
flash-timeout-us = <500000>;
flash-max-microamp = <320000>;
- max-microamp = <50000>;
+ led-max-microamp = <50000>;
};
indicator {
- max-microamp = <17500>;
+ led-max-microamp = <17500>;
};
};
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
index d4def767b..cc51b1fd6 100644
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -35,7 +35,7 @@ Required properties (tsin (child) node):
- tsin-num : tsin id of the InputBlock (must be between 0 to 6)
- i2c-bus : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
-- rst-gpio : reset gpio for this tsin channel.
+- reset-gpios : reset gpio for this tsin channel.
Optional properties (tsin (child) node):
@@ -55,27 +55,27 @@ Example:
status = "okay";
reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
reg-names = "stfe", "stfe-ram";
- interrupts = <0 34 0>, <0 35 0>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;
interrupt-names = "stfe-error-irq", "stfe-idle-irq";
-
- pinctrl-names = "tsin0-serial", "tsin0-parallel", "tsin3-serial",
- "tsin4-serial", "tsin5-serial";
-
pinctrl-0 = <&pinctrl_tsin0_serial>;
pinctrl-1 = <&pinctrl_tsin0_parallel>;
pinctrl-2 = <&pinctrl_tsin3_serial>;
pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
-
+ pinctrl-names = "tsin0-serial",
+ "tsin0-parallel",
+ "tsin3-serial",
+ "tsin4-serial",
+ "tsin5-serial";
clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
- clock-names = "stfe";
+ clock-names = "c8sectpfe";
/* tsin0 is TSA on NIMA */
tsin0: port@0 {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
- rst-gpio = <&pio15 4 0>;
+ reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
@@ -83,7 +83,7 @@ Example:
tsin-num = <3>;
serial-not-parallel;
i2c-bus = <&ssc3>;
- rst-gpio = <&pio15 7 0>;
+ reset-gpios = <&pio15 7 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMB_1>;
};
};