summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt')
-rw-r--r--Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt93
1 files changed, 93 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
new file mode 100644
index 000000000..aad984427
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -0,0 +1,93 @@
+* Samsung Exynos specific extensions to the Synopsys Designware Mobile
+ Storage Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
+ specific extensions.
+ - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
+ specific extensions.
+ - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
+ specific extensions.
+ - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
+ specific extensions.
+ - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
+ specific extensions.
+ - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
+ specific extensions having an SMU.
+
+* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
+ unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
+ ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7.
+
+* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
+ in transmit mode and CIU clock phase shift value in receive mode for single
+ data rate mode operation. Refer notes below for the order of the cells and the
+ valid values.
+
+* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
+ in transmit mode and CIU clock phase shift value in receive mode for double
+ data rate mode operation. Refer notes below for the order of the cells and the
+ valid values.
+* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
+ shift value for hs400 mode operation.
+
+ Notes for the sdr-timing and ddr-timing values:
+
+ The order of the cells should be
+ - First Cell: CIU clock phase shift value for tx mode.
+ - Second Cell: CIU clock phase shift value for rx mode.
+
+ Valid values for SDR and DDR CIU clock timing for Exynos5250:
+ - valid value for tx phase shift and rx phase shift is 0 to 7.
+ - when CIU clock divider value is set to 3, all possible 8 phase shift
+ values can be used.
+ - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
+ phase shift clocks should be 0.
+
+* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
+ (Latency value for delay line in Read path)
+
+Required properties for a slot (Deprecated - Recommend to use one slot per host):
+
+* gpios: specifies a list of gpios used for command, clock and data bus. The
+ first gpio is the command line and the second gpio is the clock line. The
+ rest of the gpios (depending on the bus-width property) are the data lines in
+ no particular order. The format of the gpio specifier depends on the gpio
+ controller.
+(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
+
+Example:
+
+ The MSHC controller node can be split into two portions, SoC specific and
+ board specific portions as listed below.
+
+ dwmmc0@12200000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ dwmmc0@12200000 {
+ num-slots = <1>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
+ bus-width = <8>;
+ };