summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/fsl-fec.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/fsl-fec.txt')
-rw-r--r--Documentation/devicetree/bindings/net/fsl-fec.txt62
1 files changed, 62 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
new file mode 100644
index 000000000..a9eb611be
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -0,0 +1,62 @@
+* Freescale Fast Ethernet Controller (FEC)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-fec"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain fec interrupt
+- phy-mode : See ethernet.txt file in the same directory
+
+Optional properties:
+- phy-reset-gpios : Should specify the gpio for phy reset
+- phy-reset-duration : Reset duration in milliseconds. Should present
+ only if property "phy-reset-gpios" is available. Missing the property
+ will have the duration be 1 millisecond. Numbers greater than 1000 are
+ invalid and 1 millisecond will be used instead.
+- phy-supply : regulator that powers the Ethernet PHY.
+- phy-handle : phandle to the PHY device connected to this device.
+- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
+ Use instead of phy-handle.
+- fsl,num-tx-queues : The property is valid for enet-avb IP, which supports
+ hw multi queues. Should specify the tx queue number, otherwise set tx queue
+ number to 1.
+- fsl,num-rx-queues : The property is valid for enet-avb IP, which supports
+ hw multi queues. Should specify the rx queue number, otherwise set rx queue
+ number to 1.
+- fsl,magic-packet : If present, indicates that the hardware supports waking
+ up via magic packet.
+
+Optional subnodes:
+- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
+ according to phy.txt in the same directory
+
+Example:
+
+ethernet@83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
+ local-mac-address = [00 04 9F 01 1B B9];
+ phy-supply = <&reg_fec_supply>;
+};
+
+Example with phy specified:
+
+ethernet@83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
+ local-mac-address = [00 04 9F 01 1B B9];
+ phy-supply = <&reg_fec_supply>;
+ phy-handle = <&ethphy>;
+ mdio {
+ ethphy: ethernet-phy@6 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <6>;
+ max-speed = <100>;
+ };
+ };
+};