summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/regulator')
-rw-r--r--Documentation/devicetree/bindings/regulator/88pm800.txt38
-rw-r--r--Documentation/devicetree/bindings/regulator/88pm860x.txt30
-rw-r--r--Documentation/devicetree/bindings/regulator/act8865-regulator.txt92
-rw-r--r--Documentation/devicetree/bindings/regulator/anatop-regulator.txt37
-rw-r--r--Documentation/devicetree/bindings/regulator/as3722-regulator.txt91
-rw-r--r--Documentation/devicetree/bindings/regulator/da9210.txt21
-rw-r--r--Documentation/devicetree/bindings/regulator/da9211.txt68
-rw-r--r--Documentation/devicetree/bindings/regulator/fan53555.txt23
-rw-r--r--Documentation/devicetree/bindings/regulator/fixed-regulator.txt34
-rw-r--r--Documentation/devicetree/bindings/regulator/gpio-regulator.txt41
-rw-r--r--Documentation/devicetree/bindings/regulator/isl9305.txt36
-rw-r--r--Documentation/devicetree/bindings/regulator/lp872x.txt160
-rw-r--r--Documentation/devicetree/bindings/regulator/ltc3589.txt99
-rw-r--r--Documentation/devicetree/bindings/regulator/max1586-regulator.txt28
-rw-r--r--Documentation/devicetree/bindings/regulator/max77802.txt88
-rw-r--r--Documentation/devicetree/bindings/regulator/max8660.txt47
-rw-r--r--Documentation/devicetree/bindings/regulator/max8907.txt69
-rw-r--r--Documentation/devicetree/bindings/regulator/max8925-regulator.txt40
-rw-r--r--Documentation/devicetree/bindings/regulator/max8952.txt52
-rw-r--r--Documentation/devicetree/bindings/regulator/max8973-regulator.txt21
-rw-r--r--Documentation/devicetree/bindings/regulator/max8997-regulator.txt146
-rw-r--r--Documentation/devicetree/bindings/regulator/mt6397-regulator.txt217
-rw-r--r--Documentation/devicetree/bindings/regulator/palmas-pmic.txt82
-rw-r--r--Documentation/devicetree/bindings/regulator/pbias-regulator.txt27
-rw-r--r--Documentation/devicetree/bindings/regulator/pfuze100.txt299
-rw-r--r--Documentation/devicetree/bindings/regulator/pwm-regulator.txt27
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator.txt92
-rw-r--r--Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt163
-rw-r--r--Documentation/devicetree/bindings/regulator/sky81452-regulator.txt18
-rw-r--r--Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt132
-rw-r--r--Documentation/devicetree/bindings/regulator/tps51632-regulator.txt27
-rw-r--r--Documentation/devicetree/bindings/regulator/tps62360-regulator.txt44
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65090.txt126
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65217.txt78
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65218.txt23
-rw-r--r--Documentation/devicetree/bindings/regulator/tps6586x.txt135
-rw-r--r--Documentation/devicetree/bindings/regulator/twl-regulator.txt67
-rw-r--r--Documentation/devicetree/bindings/regulator/vexpress.txt32
38 files changed, 2850 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/88pm800.txt b/Documentation/devicetree/bindings/regulator/88pm800.txt
new file mode 100644
index 000000000..e8a54c2a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm800.txt
@@ -0,0 +1,38 @@
+Marvell 88PM800 regulator
+
+Required properties:
+- compatible: "marvell,88pm800"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name (or the deprecated
+ regulator-compatible property if present), with valid values listed below.
+ The content of each sub-node is defined by the standard binding for
+ regulators; see regulator.txt.
+
+The valid names for regulators are:
+
+ buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
+ ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
+
+Example:
+
+ pmic: 88pm800@31 {
+ compatible = "marvell,88pm800";
+ reg = <0x31>;
+
+ regulators {
+ buck1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ldo1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <15000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+...
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt
new file mode 100644
index 000000000..1267b3e1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt
@@ -0,0 +1,30 @@
+Marvell 88PM860x regulator
+
+Required properties:
+- compatible: "marvell,88pm860x"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the regulator-compatible
+ property, with valid values listed below.
+
+Example:
+
+ pmic: 88pm860x@34 {
+ compatible = "marvell,88pm860x";
+ reg = <0x34>;
+
+ regulators {
+ BUCK1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ BUCK3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
new file mode 100644
index 000000000..e91485d11
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -0,0 +1,92 @@
+ACT88xx regulators
+-------------------
+
+Required properties:
+- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
+- reg: I2C slave address
+
+Optional properties:
+- system-power-controller: Telling whether or not this pmic is controlling
+ the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
+
+Optional input supply properties:
+- for act8600:
+ - vp1-supply: The input supply for DCDC_REG1
+ - vp2-supply: The input supply for DCDC_REG2
+ - vp3-supply: The input supply for DCDC_REG3
+ - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8
+ SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
+- for act8846:
+ - vp1-supply: The input supply for REG1
+ - vp2-supply: The input supply for REG2
+ - vp3-supply: The input supply for REG3
+ - vp4-supply: The input supply for REG4
+ - inl1-supply: The input supply for REG5, REG6 and REG7
+ - inl2-supply: The input supply for REG8 and LDO_REG9
+ - inl3-supply: The input supply for REG10, REG11 and REG12
+- for act8865:
+ - vp1-supply: The input supply for DCDC_REG1
+ - vp2-supply: The input supply for DCDC_REG2
+ - vp3-supply: The input supply for DCDC_REG3
+ - inl45-supply: The input supply for LDO_REG1 and LDO_REG2
+ - inl67-supply: The input supply for LDO_REG3 and LDO_REG4
+
+Any standard regulator properties can be used to configure the single regulator.
+
+The valid names for regulators are:
+ - for act8846:
+ REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
+ - for act8865:
+ DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
+ - for act8600:
+ DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
+ LDO_REG8, LDO_REG9, LDO_REG10,
+
+Example:
+--------
+
+ i2c1: i2c@f0018000 {
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "disabled";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-suspend-mem-microvolt = <1150000>;
+ regulator-suspend-standby-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddana_reg: LDO_REG1 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG2 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
new file mode 100644
index 000000000..758eae240
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -0,0 +1,37 @@
+Anatop Voltage regulators
+
+Required properties:
+- compatible: Must be "fsl,anatop-regulator"
+- anatop-reg-offset: Anatop MFD register offset
+- anatop-vol-bit-shift: Bit shift for the register
+- anatop-vol-bit-width: Number of bits used in the register
+- anatop-min-bit-val: Minimum value of this register
+- anatop-min-voltage: Minimum voltage of this regulator
+- anatop-max-voltage: Maximum voltage of this regulator
+
+Optional properties:
+- anatop-delay-reg-offset: Anatop MFD step time register offset
+- anatop-delay-bit-shift: Bit shift for the step time register
+- anatop-delay-bit-width: Number of bits used in the step time register
+
+Any property defined as part of the core regulator
+binding, defined in regulator.txt, can also be used.
+
+Example:
+
+ regulator-vddpu {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <9>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1300000>;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/as3722-regulator.txt b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt
new file mode 100644
index 000000000..caad0c8a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt
@@ -0,0 +1,91 @@
+Regulator of AMS AS3722 PMIC.
+Name of the regulator subnode must be "regulators".
+
+Optional properties:
+--------------------
+The input supply of regulators are the optional properties on the
+regulator node. The AS3722 is having 7 DCDC step-down regulators as
+sd[0-6], 10 LDOs as ldo[0-7], ldo[9-11]. The input supply of these
+regulators are provided through following properties:
+vsup-sd2-supply: Input supply for SD2.
+vsup-sd3-supply: Input supply for SD3.
+vsup-sd4-supply: Input supply for SD4.
+vsup-sd5-supply: Input supply for SD5.
+vin-ldo0-supply: Input supply for LDO0.
+vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
+vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
+vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
+vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
+vin-ldo11-supply: Input supply for LDO11.
+
+Optional nodes:
+--------------
+- regulators : Must contain a sub-node per regulator from the list below.
+ Each sub-node should contain the constraints and initialization
+ information for that regulator. See regulator.txt for a
+ description of standard properties for these sub-nodes.
+ Additional custom properties are listed below.
+ sd[0-6], ldo[0-7], ldo[9-11].
+
+ Optional sub-node properties:
+ ----------------------------
+ ams,ext-control: External control of the rail. The option of
+ this properties will tell which external input is
+ controlling this rail. Valid values are 0, 1, 2 ad 3.
+ 0: There is no external control of this rail.
+ 1: Rail is controlled by ENABLE1 input pin.
+ 2: Rail is controlled by ENABLE2 input pin.
+ 3: Rail is controlled by ENABLE3 input pin.
+ ams,enable-tracking: Enable tracking with SD1, only supported
+ by LDO3.
+
+Example:
+-------
+ ams3722: ams3722 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ ...
+
+ regulators {
+ vsup-sd2-supply = <...>;
+ ...
+
+ sd0 {
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ ams,ext-control = <2>;
+ };
+
+ sd1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ ams,ext-control = <1>;
+ };
+
+ sd2 {
+ regulator-name = "vddio_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ sd4 {
+ regulator-name = "avdd-hdmi-pex";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ };
+
+ sd5 {
+ regulator-name = "vdd-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ....
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt
new file mode 100644
index 000000000..3297c53cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/da9210.txt
@@ -0,0 +1,21 @@
+* Dialog Semiconductor DA9210 Voltage Regulator
+
+Required properties:
+
+- compatible: must be "dlg,da9210"
+- reg: the i2c slave address of the regulator. It should be 0x68.
+
+Any standard regulator properties can be used to configure the single da9210
+DCDC.
+
+Example:
+
+ da9210@68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
new file mode 100644
index 000000000..eb618907c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -0,0 +1,68 @@
+* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
+
+Required properties:
+- compatible: "dlg,da9211" or "dlg,da9213".
+- reg: I2C slave address, usually 0x68.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ BUCKA and BUCKB.
+
+Optional properties:
+- enable-gpios: platform gpio for control of BUCKA/BUCKB.
+- Any optional property defined in regulator.txt
+
+Example 1) DA9211
+
+ pmic: da9211@68 {
+ compatible = "dlg,da9211";
+ reg = <0x68>;
+ interrupts = <3 27>;
+
+ regulators {
+ BUCKA {
+ regulator-name = "VBUCKA";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <5000000>;
+ enable-gpios = <&gpio 27 0>;
+ };
+ BUCKB {
+ regulator-name = "VBUCKB";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <5000000>;
+ enable-gpios = <&gpio 17 0>;
+ };
+ };
+ };
+
+Example 2) DA9213
+ pmic: da9213@68 {
+ compatible = "dlg,da9213";
+ reg = <0x68>;
+ interrupts = <3 27>;
+
+ regulators {
+ BUCKA {
+ regulator-name = "VBUCKA";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <3000000>;
+ regulator-max-microamp = <6000000>;
+ enable-gpios = <&gpio 27 0>;
+ };
+ BUCKB {
+ regulator-name = "VBUCKB";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <3000000>;
+ regulator-max-microamp = <6000000>;
+ enable-gpios = <&gpio 17 0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
new file mode 100644
index 000000000..54a3f2c80
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -0,0 +1,23 @@
+Binding for Fairchild FAN53555 regulators
+
+Required properties:
+ - compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828"
+ - reg: I2C address
+
+Optional properties:
+ - fcs,suspend-voltage-selector: declare which of the two available
+ voltage selector registers should be used for the suspend
+ voltage. The other one is used for the runtime voltage setting
+ Possible values are either <0> or <1>
+ - vin-supply: regulator supplying the vin pin
+
+Example:
+
+ regulator@40 {
+ compatible = "fcs,fan53555";
+ regulator-name = "fan53555";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&parent_reg>;
+ fcs,suspend-voltage-selector = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
new file mode 100644
index 000000000..4fae41d54
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -0,0 +1,34 @@
+Fixed Voltage regulators
+
+Required properties:
+- compatible: Must be "regulator-fixed";
+
+Optional properties:
+- gpio: gpio to use for enable control
+- startup-delay-us: startup time in microseconds
+- enable-active-high: Polarity of GPIO is Active high
+If this property is missing, the default assumed is Active low.
+- gpio-open-drain: GPIO is open drain type.
+ If this property is missing then default assumption is false.
+-vin-supply: Input supply name.
+
+Any property defined as part of the core regulator
+binding, defined in regulator.txt, can also be used.
+However a fixed voltage regulator is expected to have the
+regulator-min-microvolt and regulator-max-microvolt
+to be the same.
+
+Example:
+
+ abc: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 16 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio-open-drain;
+ vin-supply = <&parent_reg>;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
new file mode 100644
index 000000000..e5cac1e0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -0,0 +1,41 @@
+GPIO controlled regulators
+
+Required properties:
+- compatible : Must be "regulator-gpio".
+- states : Selection of available voltages and GPIO configs.
+ if there are no states, then use a fixed regulator
+
+Optional properties:
+- enable-gpio : GPIO to use to enable/disable the regulator.
+- gpios : GPIO group used to control voltage.
+- gpios-states : gpios pin's initial states array. 0: LOW, 1: HIGH.
+ defualt is LOW if nothing is specified.
+- startup-delay-us : Startup time in microseconds.
+- enable-active-high : Polarity of GPIO is active high (default is low).
+- regulator-type : Specifies what is being regulated, must be either
+ "voltage" or "current", defaults to current.
+
+Any property defined as part of the core regulator binding defined in
+regulator.txt can also be used.
+
+Example:
+
+ mmciv: gpio-regulator {
+ compatible = "regulator-gpio";
+
+ regulator-name = "mmci-gpio-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2600000>;
+ regulator-boot-on;
+
+ enable-gpio = <&gpio0 23 0x4>;
+ gpios = <&gpio0 24 0x4
+ &gpio0 25 0x4>;
+ states = <1800000 0x3
+ 2200000 0x2
+ 2600000 0x1
+ 2900000 0x0>;
+
+ startup-delay-us = <100000>;
+ enable-active-high;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt
new file mode 100644
index 000000000..d6e7c9ec9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/isl9305.txt
@@ -0,0 +1,36 @@
+Intersil ISL9305/ISL9305H voltage regulator
+
+Required properties:
+
+- compatible: "isil,isl9305" or "isil,isl9305h"
+- reg: I2C slave address, usually 0x68.
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node
+ is defined by the standard binding for regulators; see regulator.txt.
+- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1.
+ VINDCD2-supply: A phandle to a regulator node supplying VINDCD2.
+ VINLDO1-supply: A phandle to a regulator node supplying VINLDO1.
+ VINLDO2-supply: A phandle to a regulator node supplying VINLDO2.
+
+Optional properties:
+- Per-regulator optional properties are defined in regulator.txt
+
+Example
+
+ pmic: isl9305@68 {
+ compatible = "isil,isl9305";
+ reg = <0x68>;
+
+ VINDCD1-supply = <&system_power>;
+ VINDCD2-supply = <&system_power>;
+ VINLDO1-supply = <&system_power>;
+ VINLDO2-supply = <&system_power>;
+
+ regulators {
+ dcd1 {
+ regulator-name = "VDD_DSP";
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
new file mode 100644
index 000000000..78183182d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/lp872x.txt
@@ -0,0 +1,160 @@
+Binding for TI/National Semiconductor LP872x Driver
+
+Required properties:
+ - compatible: "ti,lp8720" or "ti,lp8725"
+ - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725
+
+Optional properties:
+ - ti,general-config: the value of LP872X_GENERAL_CFG register (u8)
+ (LP8720)
+ bit[2]: BUCK output voltage control by external DVS pin or register
+ 1 = external pin, 0 = bit7 of register 08h
+ bit[1]: sleep control by external DVS pin or register
+ 1 = external pin, 0 = bit6 of register 08h
+ bit[0]: time step unit(usec). 1 = 25, 0 = 50
+
+ (LP8725)
+ bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256
+ bit[4]: BUCK2 enable control. 1 = enable, 0 = disable
+ bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh
+ bit[2]: BUCK1 output voltage control by external DVS pin or register
+ 1 = register 08h, 0 = DVS
+ bit[1]: LDO sleep control. 1 = sleep mode, 0 = normal
+ bit[0]: BUCK1 enable control, 1 = enable, 0 = disable
+
+ For more details, please see the datasheet.
+
+ - ti,update-config: define it when LP872X_GENERAL_CFG register should be set
+ - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
+ - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
+ - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
+
+ Sub nodes for regulator_init_data
+ LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
+ LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2)
+ For more details, please see the following binding document.
+ (Documentation/devicetree/bindings/regulator/regulator.txt)
+
+Datasheet
+ - LP8720: http://www.ti.com/lit/ds/symlink/lp8720.pdf
+ - LP8725: http://www.ti.com/lit/ds/symlink/lp8725.pdf
+
+Example 1) LP8720
+
+lp8720@7d {
+ compatible = "ti,lp8720";
+ reg = <0x7d>;
+
+ /* external DVS pin used, timestep is 25usec */
+ ti,general-config = /bits/ 8 <0x03>;
+ ti,update-config;
+
+ /*
+ * The dvs-gpio depends on the processor environment.
+ * For example, following GPIO specifier means GPIO134 in OMAP4.
+ */
+ ti,dvs-gpio = <&gpio5 6 0>;
+ ti,dvs-vsel = /bits/ 8 <1>; /* SEL_V2 */
+ ti,dvs-state = /bits/ 8 <1>; /* DVS_HIGH */
+
+ vaf: ldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vmmc: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcam_io: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ vcam_core: ldo4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-boot-on;
+ };
+
+ vcam: ldo5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc: buck {
+ regulator-name = "VBUCK";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2300000>;
+ };
+};
+
+Example 2) LP8725
+
+lp8725@7a {
+ compatible = "ti,lp8725";
+ reg = <0x7a>;
+
+ /* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */
+ ti,general-config = /bits/ 8 <0xdd>;
+ ti,update-config;
+
+ vcam_io: ldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcam_core: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcam: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcmmb_io: ldo4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ vcmmb_core: ldo5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ vaux1: lilo1 {
+ regulator-name = "VAUX1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vaux2: lilo2 {
+ regulator-name = "VAUX2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc1: buck1 {
+ regulator-name = "VBUCK1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <1370000>;
+ regulator-boot-on;
+ };
+
+ vcc2: buck2 {
+ regulator-name = "VBUCK2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <1370000>;
+ regulator-boot-on;
+ };
+};
diff --git a/Documentation/devicetree/bindings/regulator/ltc3589.txt b/Documentation/devicetree/bindings/regulator/ltc3589.txt
new file mode 100644
index 000000000..801053036
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ltc3589.txt
@@ -0,0 +1,99 @@
+Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators
+
+Required properties:
+- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2"
+- reg: I2C slave address
+
+Required child node:
+- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out,
+ ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
+ documented in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators. The
+nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify
+the resistor values of their external feedback voltage dividers:
+
+Required properties (not on ldo3, ldo4):
+- lltc,fb-voltage-divider: An array of two integers containing the resistor
+ values R1 and R2 of the feedback voltage divider in ohms.
+
+Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from
+0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between
+0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1
+have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3
+regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4
+regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V
+and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not
+be disabled and thus should have the regulator-always-on property set.
+
+Example:
+
+ ltc3589: pmic@34 {
+ compatible = "lltc,ltc3589-1";
+ reg = <0x34>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <591930>;
+ regulator-max-microvolt = <1224671>;
+ lltc,fb-voltage-divider = <100000 158000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <704123>;
+ regulator-max-microvolt = <1456803>;
+ lltc,fb-voltage-divider = <180000 191000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <1341250>;
+ regulator-max-microvolt = <2775000>;
+ lltc,fb-voltage-divider = <270000 100000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bb_out_reg: bb-out {
+ regulator-min-microvolt = <3387341>;
+ regulator-max-microvolt = <3387341>;
+ lltc,fb-voltage-divider = <511000 158000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <1306329>;
+ regulator-max-microvolt = <1306329>;
+ lltc,fb-voltage-divider = <100000 158000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <704123>;
+ regulator-max-microvolt = <1456806>;
+ lltc,fb-voltage-divider = <180000 191000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3200000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max1586-regulator.txt b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt
new file mode 100644
index 000000000..c050c1744
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt
@@ -0,0 +1,28 @@
+Maxim MAX1586 voltage regulator
+
+Required properties:
+- compatible: must be "maxim,max1586"
+- reg: I2C slave address, usually 0x14
+- v3-gain: integer specifying the V3 gain as per datasheet
+ (1 + R24/R25 + R24/185.5kOhm)
+- any required generic properties defined in regulator.txt
+
+Example:
+
+ i2c_master {
+ max1586@14 {
+ compatible = "maxim,max1586";
+ reg = <0x14>;
+ v3-gain = <1000000>;
+
+ regulators {
+ vcc_core: v3 {
+ regulator-name = "vcc_core";
+ regulator-compatible = "Output_V3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1705000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
new file mode 100644
index 000000000..79e547644
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77802.txt
@@ -0,0 +1,88 @@
+Binding for Maxim MAX77802 regulators
+
+This is a part of device tree bindings of MAX77802 multi-function device.
+More information can be found in bindings/mfd/max77802.txt file.
+
+The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
+regulators that can be controlled over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Optional node:
+- regulators : The regulators of max77802 have to be instantiated
+ under subnode named "regulators" using the following format.
+
+ regulator-name {
+ standard regulator constraints....
+ };
+ refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+The regulator node name should be initialized with a string to get matched
+with their hardware counterparts as follow. The valid names are:
+
+ -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
+ and 32-35.
+ example: LDO1, LDO2, LDO35.
+ -BUCKn : for BUCKs, where n can lie in range 1 to 10.
+ example: BUCK1, BUCK5, BUCK10.
+
+The max77802 regulator supports two different operating modes: Normal and Low
+Power Mode. Some regulators support the modes to be changed at startup or by
+the consumers during normal operation while others only support to change the
+mode during system suspend. The standard regulator suspend states binding can
+be used to configure the regulator operating mode.
+
+The regulators that support the standard "regulator-initial-mode" property,
+changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
+
+The possible values for "regulator-initial-mode" and "regulator-mode" are:
+ 1: Normal regulator voltage output mode.
+ 3: Low Power which reduces the quiescent current down to only 1uA
+
+The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h
+header and can be included by device tree source files.
+
+The standard "regulator-mode" property can only be used for regulators that
+support changing their mode to Low Power Mode during suspend. These regulators
+are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
+been enabled for the given suspend state using "regulator-on-in-suspend" and
+has not been disabled for that state using "regulator-off-in-suspend".
+
+Example:
+
+ max77802@09 {
+ compatible = "maxim,max77802";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-initial-mode = <MAX77802_OPMODE_LP>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max8660.txt b/Documentation/devicetree/bindings/regulator/max8660.txt
new file mode 100644
index 000000000..8ba994d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8660.txt
@@ -0,0 +1,47 @@
+Maxim MAX8660 voltage regulator
+
+Required properties:
+- compatible: must be one of "maxim,max8660", "maxim,max8661"
+- reg: I2C slave address, usually 0x34
+- any required generic properties defined in regulator.txt
+
+Example:
+
+ i2c_master {
+ max8660@34 {
+ compatible = "maxim,max8660";
+ reg = <0x34>;
+
+ regulators {
+ regulator@0 {
+ regulator-compatible= "V3(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@1 {
+ regulator-compatible= "V4(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@2 {
+ regulator-compatible= "V5(LDO)";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ regulator@3 {
+ regulator-compatible= "V6(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@4 {
+ regulator-compatible= "V7(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt
new file mode 100644
index 000000000..371eccd1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8907.txt
@@ -0,0 +1,69 @@
+MAX8907 regulator
+
+Required properties:
+- compatible: "maxim,max8907"
+- reg: I2C slave address
+- interrupts: The interrupt output of the controller
+- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC.
+- in-v1-supply: The input supply for SD1.
+- in-v2-supply: The input supply for SD2.
+- in-v3-supply: The input supply for SD3.
+- in1-supply: The input supply for LDO1.
+...
+- in20-supply: The input supply for LDO20.
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name (or the deprecated
+ regulator-compatible property if present), with valid values listed below.
+ The content of each sub-node is defined by the standard binding for
+ regulators; see regulator.txt.
+
+Optional properties:
+- maxim,system-power-controller: Boolean property indicating that the PMIC
+ controls the overall system power.
+
+The valid names for regulators are:
+
+ sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
+ ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v,
+ out33v, bbat, sdby, vrtc.
+
+Example:
+
+ max8907@3c {
+ compatible = "maxim,max8907";
+ reg = <0x3c>;
+ interrupts = <0 86 0x4>;
+
+ maxim,system-power-controller;
+
+ mbatt-supply = <&some_reg>;
+ in-v1-supply = <&mbatt_reg>;
+ ...
+ in1-supply = <&mbatt_reg>;
+ ...
+
+ regulators {
+ mbatt_reg: mbatt {
+ regulator-name = "vbat_pmu";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ sd1 {
+ regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sd2 {
+ regulator-name = "nvvdd_sv2,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+...
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max8925-regulator.txt b/Documentation/devicetree/bindings/regulator/max8925-regulator.txt
new file mode 100644
index 000000000..0057695aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8925-regulator.txt
@@ -0,0 +1,40 @@
+Max8925 Voltage regulators
+
+Required nodes:
+-nodes:
+ - SDV1 for SDV SDV1
+ - SDV2 for SDV SDV2
+ - SDV3 for SDV SDV3
+ - LDO1 for LDO LDO1
+ - LDO2 for LDO LDO2
+ - LDO3 for LDO LDO3
+ - LDO4 for LDO LDO4
+ - LDO5 for LDO LDO5
+ - LDO6 for LDO LDO6
+ - LDO7 for LDO LDO7
+ - LDO8 for LDO LDO8
+ - LDO9 for LDO LDO9
+ - LDO10 for LDO LDO10
+ - LDO11 for LDO LDO11
+ - LDO12 for LDO LDO12
+ - LDO13 for LDO LDO13
+ - LDO14 for LDO LDO14
+ - LDO15 for LDO LDO15
+ - LDO16 for LDO LDO16
+ - LDO17 for LDO LDO17
+ - LDO18 for LDO LDO18
+ - LDO19 for LDO LDO19
+ - LDO20 for LDO LDO20
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+ SDV1 {
+ regulator-min-microvolt = <637500>;
+ regulator-max-microvolt = <1425000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
diff --git a/Documentation/devicetree/bindings/regulator/max8952.txt b/Documentation/devicetree/bindings/regulator/max8952.txt
new file mode 100644
index 000000000..866fcdd0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8952.txt
@@ -0,0 +1,52 @@
+Maxim MAX8952 voltage regulator
+
+Required properties:
+- compatible: must be equal to "maxim,max8952"
+- reg: I2C slave address, usually 0x60
+- max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages
+ in microvolts. All values must be from range <770000, 1400000>
+- any required generic properties defined in regulator.txt
+
+Optional properties:
+- max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection
+- max8952,en-gpio: GPIO used to control enable status of regulator
+- max8952,default-mode: index of default DVS voltage, from <0, 3> range
+- max8952,sync-freq: sync frequency, must be one of following values:
+ - 0: 26 MHz
+ - 1: 13 MHz
+ - 2: 19.2 MHz
+ Defaults to 26 MHz if not specified.
+- max8952,ramp-speed: voltage ramp speed, must be one of following values:
+ - 0: 32mV/us
+ - 1: 16mV/us
+ - 2: 8mV/us
+ - 3: 4mV/us
+ - 4: 2mV/us
+ - 5: 1mV/us
+ - 6: 0.5mV/us
+ - 7: 0.25mV/us
+ Defaults to 32mV/us if not specified.
+- any available generic properties defined in regulator.txt
+
+Example:
+
+ vdd_arm_reg: pmic@60 {
+ compatible = "maxim,max8952";
+ reg = <0x60>;
+
+ /* max8952-specific properties */
+ max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+ max8952,en-gpio = <&gpx0 1 0>;
+ max8952,default-mode = <0>;
+ max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+ <1050000>, <950000>;
+ max8952,sync-freq = <0>;
+ max8952,ramp-speed = <0>;
+
+ /* generic regulator properties */
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <770000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
new file mode 100644
index 000000000..4f15d8a1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
@@ -0,0 +1,21 @@
+* Maxim MAX8973 Voltage Regulator
+
+Required properties:
+
+- compatible: must be "maxim,max8973"
+- reg: the i2c slave address of the regulator. It should be 0x1b.
+
+Any standard regulator properties can be used to configure the single max8973
+DCDC.
+
+Example:
+
+ max8973@1b {
+ compatible = "maxim,max8973";
+ reg = <0x1b>;
+
+ regulator-min-microvolt = <935000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
new file mode 100644
index 000000000..5c186a7a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -0,0 +1,146 @@
+* Maxim MAX8997 Voltage and Current Regulator
+
+The Maxim MAX8997 is a multi-function device which includes voltage and
+current regulators, rtc, charger controller and other sub-blocks. It is
+interfaced to the host controller using a i2c interface. Each sub-block is
+addressed by the host system using different i2c slave address. This document
+describes the bindings for 'pmic' sub-block of max8997.
+
+Required properties:
+- compatible: Should be "maxim,max8997-pmic".
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck1 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck5 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
+ property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage'
+ property should specify atleast one voltage level (which would be a
+ safe operating voltage).
+
+ If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
+ property is specified, then all the eight voltage values for the
+ 'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from max8997 are delivered to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+ - First interrupt specifier is for 'irq1' interrupt.
+ - Second interrupt specifier is for 'alert' interrupt.
+- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
+- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for
+ multiple bucks, changing the voltage value of one of the bucks may affect
+ that of another buck, which is the side effect of the change (set_voltage).
+ Use this property to ignore such side effects and change the voltage.
+
+- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from
+ the possible 8 options selectable by the dvs gpios. The value of this
+ property should be between 0 and 7. If not specified or if out of range, the
+ default value of this property is set to 0.
+
+- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
+ for dvs. The format of the gpio specifier depends in the gpio controller.
+
+Regulators: The regulators of max8997 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+ regulator_name {
+ standard regulator bindings here
+ };
+
+The following are the names of the regulators that the max8997 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of max8997.
+
+ - LDOn
+ - valid values for n are 1 to 18 and 21
+ - Example: LDO0, LD01, LDO2, LDO21
+ - BUCKn
+ - valid values for n are 1 to 7.
+ - Example: BUCK1, BUCK2, BUCK3, BUCK7
+
+ - ENVICHG: Battery Charging Current Monitor Output. This is a fixed
+ voltage type regulator
+
+ - ESAFEOUT1: (ldo19)
+ - ESAFEOUT2: (ld020)
+
+ - CHARGER_CV: main battery charger voltage control
+ - CHARGER: main battery charger current control
+ - CHARGER_TOPOFF: end of charge current threshold level
+
+The bindings inside the regulator nodes use the standard regulator bindings
+which are documented elsewhere.
+
+Example:
+
+ max8997_pmic@66 {
+ compatible = "maxim,max8997-pmic";
+ interrupt-parent = <&wakeup_eint>;
+ reg = <0x66>;
+ interrupts = <4 0>, <3 0>;
+
+ max8997,pmic-buck1-uses-gpio-dvs;
+ max8997,pmic-buck2-uses-gpio-dvs;
+ max8997,pmic-buck5-uses-gpio-dvs;
+
+ max8997,pmic-ignore-gpiodvs-side-effect;
+ max8997,pmic-buck125-default-dvs-idx = <0>;
+
+ max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
+ <&gpx0 1 1 0 0>, /* SET2 */
+ <&gpx0 2 1 0 0>; /* SET3 */
+
+ max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_ARM_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
new file mode 100644
index 000000000..a42b1d6e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
@@ -0,0 +1,217 @@
+Mediatek MT6397 Regulator Driver
+
+Required properties:
+- compatible: "mediatek,mt6397-regulator"
+- mt6397regulator: List of regulators provided by this controller. It is named
+ according to its regulator type, buck_<name> and ldo_<name>.
+ The definition for each of these nodes is defined using the standard binding
+ for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+ buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu,
+ buck_vdrm, buck_vio18
+LDO:
+ ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch,
+ ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6,
+ ldo_vibr
+
+Example:
+ pmic {
+ compatible = "mediatek,mt6397";
+
+ mt6397regulator: mt6397regulator {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <200>;
+ };
+
+ mt6397_vpca7_reg: buck_vpca7 {
+ regulator-compatible = "buck_vpca7";
+ regulator-name = "vpca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vsramca15_reg: buck_vsramca15 {
+ regulator-compatible = "buck_vsramca15";
+ regulator-name = "vsramca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+
+ };
+
+ mt6397_vsramca7_reg: buck_vsramca7 {
+ regulator-compatible = "buck_vsramca7";
+ regulator-name = "vsramca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+
+ };
+
+ mt6397_vcore_reg: buck_vcore {
+ regulator-compatible = "buck_vcore";
+ regulator-name = "vcore";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vgpu_reg: buck_vgpu {
+ regulator-compatible = "buck_vgpu";
+ regulator-name = "vgpu";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vdrm_reg: buck_vdrm {
+ regulator-compatible = "buck_vdrm";
+ regulator-name = "vdrm";
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ mt6397_vio18_reg: buck_vio18 {
+ regulator-compatible = "buck_vio18";
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2120000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <500>;
+ };
+
+ mt6397_vtcxo_reg: ldo_vtcxo {
+ regulator-compatible = "ldo_vtcxo";
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ };
+
+ mt6397_va28_reg: ldo_va28 {
+ regulator-compatible = "ldo_va28";
+ regulator-name = "va28";
+ /* fixed output 2.8 V */
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vcama_reg: ldo_vcama {
+ regulator-compatible = "ldo_vcama";
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vio28_reg: ldo_vio28 {
+ regulator-compatible = "ldo_vio28";
+ regulator-name = "vio28";
+ /* fixed output 2.8 V */
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_usb_reg: ldo_vusb {
+ regulator-compatible = "ldo_vusb";
+ regulator-name = "vusb";
+ /* fixed output 3.3 V */
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmc_reg: ldo_vmc {
+ regulator-compatible = "ldo_vmc";
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmch_reg: ldo_vmch {
+ regulator-compatible = "ldo_vmch";
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+ regulator-compatible = "ldo_vemc3v3";
+ regulator-name = "vemc_3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp1_reg: ldo_vgp1 {
+ regulator-compatible = "ldo_vgp1";
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1220000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_vgp2_reg: ldo_vgp2 {
+ egulator-compatible = "ldo_vgp2";
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp3_reg: ldo_vgp3 {
+ regulator-compatible = "ldo_vgp3";
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp5_reg: ldo_vgp5 {
+ regulator-compatible = "ldo_vgp5";
+ regulator-name = "vgp5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp6_reg: ldo_vgp6 {
+ regulator-compatible = "ldo_vgp6";
+ regulator-name = "vgp6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vibr_reg: ldo_vibr {
+ regulator-compatible = "ldo_vibr";
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
new file mode 100644
index 000000000..725393c8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -0,0 +1,82 @@
+* palmas regulator IP block devicetree bindings
+
+Required properties:
+- compatible : Should be from the list
+ ti,twl6035-pmic
+ ti,twl6036-pmic
+ ti,twl6037-pmic
+ ti,tps65913-pmic
+ ti,tps65914-pmic
+ ti,tps65917-pmic
+and also the generic series names
+ ti,palmas-pmic
+- interrupt-parent : The parent interrupt controller which is palmas.
+- interrupts : The interrupt number and the type which can be looked up here:
+ arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h
+- interrupts-name: The names of the individual interrupts.
+
+Optional properties:
+- ti,ldo6-vibrator : ldo6 is in vibrator mode
+
+Optional nodes:
+- regulators : Must contain a sub-node per regulator from the list below.
+ Each sub-node should contain the constraints and initialization
+ information for that regulator. See regulator.txt for a
+ description of standard properties for these sub-nodes.
+ Additional custom properties are listed below.
+
+ For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
+ smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
+ smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb.
+
+ Optional sub-node properties:
+ ti,warm-reset - maintain voltage during warm reset(boolean)
+ ti,roof-floor - This takes as optional argument on platform supporting
+ the rail from desired external control. If there is no argument then
+ it will be assume that it is controlled by NSLEEP pin.
+ The valid value for external pins are:
+ ENABLE1 then 1,
+ ENABLE2 then 2 or
+ NSLEEP then 3.
+ ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
+ 2 - eco, 3 - forced pwm
+ ti,smps-range - OTP has the wrong range set for the hardware so override
+ 0 - low range, 1 - high range.
+
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+ the system power.
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+pmic {
+ compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+ interrupt-parent = <&palmas>;
+ interrupts = <14 IRQ_TYPE_NONE>;
+ interrupts-name = "short-irq";
+
+ ti,ldo6-vibrator;
+
+ ti,system-power-controller;
+
+ regulators {
+ smps12_reg : smps12 {
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,warm-reset;
+ ti,roof-floor = <1>; /* ENABLE1 control */
+ ti,mode-sleep = <0>;
+ ti,smps-range = <1>;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
new file mode 100644
index 000000000..32aa26f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
@@ -0,0 +1,27 @@
+PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+ - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
+- reg: pbias register offset from syscon base and size of pbias register.
+- syscon : phandle of the system control module
+- regulator-name : should be
+ pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs
+ pbias_sim_omap3 for OMAP3 SoCs
+ pbias_mmc_omap4 for OMAP4 SoCs
+ pbias_mmc_omap5 for OMAP5 and DRA7 SoC
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0 0x4>;
+ syscon = <&omap5_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
new file mode 100644
index 000000000..9b40db88f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -0,0 +1,299 @@
+PFUZE100 family of regulators
+
+Required properties:
+- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
+- reg: I2C slave address
+
+Required child node:
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Please refer to below doc
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ The valid names for regulators are:
+ --PFUZE100
+ sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
+ --PFUZE200
+ sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6
+ --PFUZE3000
+ sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+
+Each regulator is defined using the standard binding for regulators.
+
+Example 1: PFUZE100
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+
+Example 2: PFUZE200
+
+ pmic: pfuze200@08 {
+ compatible = "fsl,pfuze200";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+Example 3: PFUZE3000
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
new file mode 100644
index 000000000..ce91f61fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -0,0 +1,27 @@
+pwm regulator bindings
+
+Required properties:
+- compatible: Should be "pwm-regulator"
+- pwms: OF device-tree PWM specification (see PWM binding pwm.txt)
+- voltage-table: voltage and duty table, include 2 members in each set of
+ brackets, first one is voltage(unit: uv), the next is duty(unit: percent)
+
+Any property defined as part of the core regulator binding defined in
+regulator.txt can also be used.
+
+Example:
+ pwm_regulator {
+ compatible = "pwm-regulator;
+ pwms = <&pwm1 0 8448 0>;
+
+ voltage-table = <1114000 0>,
+ <1095000 10>,
+ <1076000 20>,
+ <1056000 30>,
+ <1036000 40>,
+ <1016000 50>;
+
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+ };
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
new file mode 100644
index 000000000..abb26b58c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -0,0 +1,92 @@
+Voltage/Current Regulators
+
+Optional properties:
+- regulator-name: A string used as a descriptive name for regulator outputs
+- regulator-min-microvolt: smallest voltage consumers may set
+- regulator-max-microvolt: largest voltage consumers may set
+- regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops
+- regulator-min-microamp: smallest current consumers may set
+- regulator-max-microamp: largest current consumers may set
+- regulator-always-on: boolean, regulator should never be disabled
+- regulator-boot-on: bootloader/firmware enabled regulator
+- regulator-allow-bypass: allow the regulator to go into bypass mode
+- <name>-supply: phandle to the parent supply/regulator node
+- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+ For hardware which supports disabling ramp rate, it should be explicitly
+ intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
+- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply
+ rail to reach the target voltage, plus/minus whatever tolerance the board
+ design requires. This property describes the total system ramp time
+ required due to the combination of internal ramping of the regulator itself,
+ and board design issues such as trace capacitance and load on the supply.
+- regulator-state-mem sub-root node for Suspend-to-RAM mode
+ : suspend to memory, the device goes to sleep, but all data stored in memory,
+ only some external interrupt can wake the device.
+- regulator-state-disk sub-root node for Suspend-to-DISK mode
+ : suspend to disk, this state operates similarly to Suspend-to-RAM,
+ but includes a final step of writing memory contents to disk.
+- regulator-state-[mem/disk] node has following common properties:
+ - regulator-on-in-suspend: regulator should be on in suspend state.
+ - regulator-off-in-suspend: regulator should be off in suspend state.
+ - regulator-suspend-microvolt: regulator should be set to this voltage
+ in suspend.
+ - regulator-mode: operating mode in the given suspend state.
+ The set of possible operating modes depends on the capabilities of
+ every hardware so the valid modes are documented on each regulator
+ device tree binding document.
+- regulator-initial-mode: initial operating mode. The set of possible operating
+ modes depends on the capabilities of every hardware so each device binding
+ documentation explains which values the regulator supports.
+
+Deprecated properties:
+- regulator-compatible: If a regulator chip contains multiple
+ regulators, and if the chip's binding contains a child node that
+ describes each regulator, then this property indicates which regulator
+ this child node is intended to configure. If this property is missing,
+ the node's name will be used instead.
+
+Example:
+
+ xyzreg: regulator@0 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ vin-supply = <&vin>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+Regulator Consumers:
+Consumer nodes can reference one or more of its supplies/
+regulators using the below bindings.
+
+- <name>-supply: phandle to the regulator node
+
+These are the same bindings that a regulator in the above
+example used to reference its own supply, in which case
+its just seen as a special case of a regulator being a
+consumer itself.
+
+Example of a consumer device node (mmc) referencing two
+regulators (twl_reg1 and twl_reg2),
+
+ twl_reg1: regulator@0 {
+ ...
+ ...
+ ...
+ };
+
+ twl_reg2: regulator@1 {
+ ...
+ ...
+ ...
+ };
+
+ mmc: mmc@0x0 {
+ ...
+ ...
+ vmmc-supply = <&twl_reg1>;
+ vmmcaux-supply = <&twl_reg2>;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
new file mode 100644
index 000000000..20191315e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -0,0 +1,163 @@
+* Samsung S5M8767 Voltage and Current Regulator
+
+The Samsung S5M8767 is a multi-function device which includes voltage and
+current regulators, rtc, charger controller and other sub-blocks. It is
+interfaced to the host controller using a i2c interface. Each sub-block is
+addressed by the host system using different i2c slave address. This document
+describes the bindings for 'pmic' sub-block of s5m8767.
+
+Required properties:
+- compatible: Should be "samsung,s5m8767-pmic".
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck3 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck4 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+ for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
+ property should specify atleast one voltage level (which would be a
+ safe operating voltage).
+
+ If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, then all the eight voltage values for the
+ 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from s5m8767 are delivered to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+ - First interrupt specifier is for 'irq1' interrupt.
+ - Second interrupt specifier is for 'alert' interrupt.
+- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
+- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+
+- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ the possible 8 options selectable by the dvs gpios. The value of this
+ property should be between 0 and 7. If not specified or if out of range, the
+ default value of this property is set to 0.
+
+- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
+ for dvs. The format of the gpio specifier depends in the gpio controller.
+
+Regulators: The regulators of s5m8767 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+ regulator_name {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+ };
+The above regulator entries are defined in regulator bindings documentation
+except these properties:
+ - op_mode: describes the different operating modes of the LDO's with
+ power mode change in SOC. The different possible values are,
+ 0 - always off mode
+ 1 - on in normal mode
+ 2 - low power mode
+ 3 - suspend mode
+ - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
+ GPIO controlling this regulator (enable/disable); This is
+ valid only for buck9.
+
+The following are the names of the regulators that the s5m8767 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s5m8767.
+
+ - LDOn
+ - valid values for n are 1 to 28
+ - Example: LDO1, LDO2, LDO28
+ - BUCKn
+ - valid values for n are 1 to 9.
+ - Example: BUCK1, BUCK2, BUCK9
+
+The bindings inside the regulator nodes use the standard regulator bindings
+which are documented elsewhere.
+
+Example:
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck2-uses-gpio-dvs;
+ s5m8767,pmic-buck3-uses-gpio-dvs;
+ s5m8767,pmic-buck4-uses-gpio-dvs;
+
+ s5m8767,pmic-buck-default-dvs-idx = <0>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
+ <&gpx0 1 0>, /* DVS2 */
+ <&gpx0 2 0>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
+ <&gpx2 4 0>, /* SET2 */
+ <&gpx2 5 0>; /* SET3 */
+
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vemmc_reg: BUCK9 {
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <3>; /* Standby Mode */
+ s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
new file mode 100644
index 000000000..f9acbc1f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
@@ -0,0 +1,18 @@
+SKY81452 voltage regulator
+
+Required properties:
+- regulator node named lout.
+- any required generic properties defined in regulator.txt
+
+Optional properties:
+- any available generic properties defined in regulator.txt
+
+Example:
+
+ regulator {
+ lout {
+ regulator-name = "sky81452-lout";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <8000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
new file mode 100644
index 000000000..c58db75f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
@@ -0,0 +1,132 @@
+Adaptive Body Bias(ABB) SoC internal LDO regulator for Texas Instruments SoCs
+
+Required Properties:
+- compatible: Should be one of:
+ - "ti,abb-v1" for older SoCs like OMAP3
+ - "ti,abb-v2" for newer SoCs like OMAP4, OMAP5
+ - "ti,abb-v3" for a generic definition where setup and control registers are
+ provided (example: DRA7)
+- reg: Address and length of the register set for the device. It contains
+ the information of registers in the same order as described by reg-names
+- reg-names: Should contain the reg names
+ - "base-address" - contains base address of ABB module (ti,abb-v1,ti,abb-v2)
+ - "control-address" - contains control register address of ABB module (ti,abb-v3)
+ - "setup-address" - contains setup register address of ABB module (ti,abb-v3)
+ - "int-address" - contains address of interrupt register for ABB module
+ (also see Optional properties)
+- #address-cell: should be 0
+- #size-cell: should be 0
+- clocks: should point to the clock node used by ABB module
+- ti,settling-time: Settling time in uSecs from SoC documentation for ABB module
+ to settle down(target time for SR2_WTCNT_VALUE).
+- ti,clock-cycles: SoC specific data about count of system ti,clock-cycles used for
+ computing settling time from SoC Documentation for ABB module(clock
+ cycles for SR2_WTCNT_VALUE).
+- ti,tranxdone-status-mask: Mask to the int-register to write-to-clear mask
+ indicating LDO tranxdone (operation complete).
+- ti,abb_info: An array of 6-tuples u32 items providing information about ABB
+ configuration needed per operational voltage of the device.
+ Each item consists of the following in the same order:
+ volt: voltage in uV - Only used to index ABB information.
+ ABB mode: one of the following:
+ 0-bypass
+ 1-Forward Body Bias(FBB)
+ 3-Reverse Body Bias(RBB)
+ efuse: (see Optional properties)
+ RBB enable efuse Mask: (See Optional properties)
+ FBB enable efuse Mask: (See Optional properties)
+ Vset value efuse Mask: (See Optional properties)
+
+ NOTE: If more than 1 entry is present, then regulator is setup to change
+ voltage, allowing for various modes to be selected indexed off
+ the regulator. Further, ABB LDOs are considered always-on by
+ default.
+
+Optional Properties:
+- reg-names: In addition to the required properties, the following are optional
+ - "efuse-address" - Contains efuse base address used to pick up ABB info.
+ - "ldo-address" - Contains address of ABB LDO overide register address.
+ "efuse-address" is required for this.
+- ti,ldovbb-vset-mask - Required if ldo-address is set, mask for LDO override
+ register to provide override vset value.
+- ti,ldovbb-override-mask - Required if ldo-address is set, mask for LDO
+ override register to enable override vset value.
+- ti,abb_opp_sel: Addendum to the description in required properties
+ efuse: Mandatory if 'efuse-address' register is defined. Provides offset
+ from efuse-address to pick up ABB characteristics. Set to 0 if
+ 'efuse-address' is not defined.
+ RBB enable efuse Mask: Optional if 'efuse-address' register is defined.
+ 'ABB mode' is force set to RBB mode if value at "efuse-address"
+ + efuse maps to RBB mask. Set to 0 to ignore this.
+ FBB enable efuse Mask: Optional if 'efuse-address' register is defined.
+ 'ABB mode' is force set to FBB mode if value at "efuse-address"
+ + efuse maps to FBB mask (valid only if RBB mask does not match)
+ Set to 0 to ignore this.
+ Vset value efuse Mask: Mandatory if ldo-address is set. Picks up from
+ efuse the value to set in 'ti,ldovbb-vset-mask' at ldo-address.
+
+Example #1: Simplest configuration (no efuse data, hard coded ABB table):
+abb_x: regulator-abb-x {
+ compatible = "ti,abb-v1";
+ regulator-name = "abb_x";
+ #address-cell = <0>;
+ #size-cells = <0>;
+ reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+ reg-names = "base-address", "int-address";
+ ti,tranxdone-status-mask = <0x4000000>;
+ clocks = <&sysclk>;
+ ti,settling-time = <30>;
+ ti,clock-cycles = <8>;
+ ti,abb_info = <
+ /* uV ABB efuse rbb_m fbb_m vset_m */
+ 1012500 0 0 0 0 0 /* Bypass */
+ 1200000 3 0 0 0 0 /* RBB mandatory */
+ 1320000 1 0 0 0 0 /* FBB mandatory */
+ >;
+};
+
+Example #2: Efuse bits contain ABB mode setting (no LDO override capability)
+abb_y: regulator-abb-y {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_y";
+ #address-cell = <0>;
+ #size-cells = <0>;
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, <0x4A002268 0x8>;
+ reg-names = "base-address", "int-address", "efuse-address";
+ ti,tranxdone-status-mask = <0x4000000>;
+ clocks = <&sysclk>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+ ti,abb_info = <
+ /* uV ABB efuse rbb_m fbb_m vset_m */
+ 975000 0 0 0 0 0 /* Bypass */
+ 1012500 0 0 0x40000 0 0 /* RBB optional */
+ 1200000 0 0x4 0 0x40000 0 /* FBB optional */
+ 1320000 1 0 0 0 0 /* FBB mandatory */
+ >;
+};
+
+Example #3: Efuse bits contain ABB mode setting and LDO override capability
+abb_z: regulator-abb-z {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_z";
+ #address-cell = <0>;
+ #size-cells = <0>;
+ reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+ <0x4a002194 0x8>, <0x4ae0C314 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x8000000>;
+ /* LDOVBBMM_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMM_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+ clocks = <&sysclk>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+ ti,abb_info = <
+ /* uV ABB efuse rbb_m fbb_m vset_m */
+ 975000 0 0 0 0 0 /* Bypass */
+ 1200000 0 0x4 0 0x40000 0x1f00 /* FBB optional, vset */
+ >;
+};
diff --git a/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
new file mode 100644
index 000000000..2f7e44a96
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
@@ -0,0 +1,27 @@
+TPS51632 Voltage regulators
+
+Required properties:
+- compatible: Must be "ti,tps51632"
+- reg: I2C slave address
+
+Optional properties:
+- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.
+- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this
+ will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage
+ step is 10mV as per datasheet.
+
+Any property defined as part of the core regulator binding, defined in
+regulator.txt, can also be used.
+
+Example:
+
+ tps51632 {
+ compatible = "ti,tps51632";
+ reg = <0x43>;
+ regulator-name = "tps51632-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ ti,enable-pwm-dvfs;
+ ti,dvfs-step-20mV;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
new file mode 100644
index 000000000..1b20c3dbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
@@ -0,0 +1,44 @@
+TPS62360 Voltage regulators
+
+Required properties:
+- compatible: Must be one of the following.
+ "ti,tps62360"
+ "ti,tps62361",
+ "ti,tps62362",
+ "ti,tps62363",
+- reg: I2C slave address
+
+Optional properties:
+- ti,enable-vout-discharge: Enable output discharge. This is boolean value.
+- ti,enable-pull-down: Enable pull down. This is boolean value.
+- ti,vsel0-gpio: GPIO for controlling VSEL0 line.
+ If this property is missing, then assume that there is no GPIO
+ for vsel0 control.
+- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
+ If this property is missing, then assume that there is no GPIO
+ for vsel1 control.
+- ti,vsel0-state-high: Initial state of vsel0 input is high.
+ If this property is missing, then assume the state as low (0).
+- ti,vsel1-state-high: Initial state of vsel1 input is high.
+ If this property is missing, then assume the state as low (0).
+
+Any property defined as part of the core regulator binding, defined in
+regulator.txt, can also be used.
+
+Example:
+
+ abc: tps62360 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on
+ ti,vsel0-gpio = <&gpio1 16 0>;
+ ti,vsel1-gpio = <&gpio1 17 0>;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ ti,enable-pull-down;
+ ti,enable-force-pwm;
+ ti,enable-vout-discharge;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt
new file mode 100644
index 000000000..ca69f5e30
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65090.txt
@@ -0,0 +1,126 @@
+TPS65090 regulators
+
+Required properties:
+- compatible: "ti,tps65090"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
+- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
+- infet[1-7]-supply: The input supply for FET[1-7] respectively.
+- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
+
+Optional properties:
+- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
+ If DCDCs are externally controlled then this property should be there.
+- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+ If DCDCs are externally controlled and if it is from GPIO then GPIO
+ number should be provided. If it is externally controlled and no GPIO
+ entry then driver will just configure this rails as external control
+ and will not provide any enable/disable APIs.
+- ti,overcurrent-wait: This is applicable to FET registers, which have a
+ poorly defined "overcurrent wait" field. If this property is present it
+ should be between 0 - 3. If this property isn't present we won't touch the
+ "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps65090@48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+ interrupts = <0 88 0x4>;
+
+ vsys1-supply = <&some_reg>;
+ vsys2-supply = <&some_reg>;
+ vsys3-supply = <&some_reg>;
+ infet1-supply = <&some_reg>;
+ infet2-supply = <&some_reg>;
+ infet3-supply = <&some_reg>;
+ infet4-supply = <&some_reg>;
+ infet5-supply = <&some_reg>;
+ infet6-supply = <&some_reg>;
+ infet7-supply = <&some_reg>;
+ vsys-l1-supply = <&some_reg>;
+ vsys-l2-supply = <&some_reg>;
+
+ regulators {
+ dcdc1 {
+ regulator-name = "dcdc1";
+ regulator-boot-on;
+ regulator-always-on;
+ ti,enable-ext-control;
+ dcdc-ext-control-gpios = <&gpio 10 0>;
+ };
+
+ dcdc2 {
+ regulator-name = "dcdc2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3 {
+ regulator-name = "dcdc3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet1 {
+ regulator-name = "fet1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet2 {
+ regulator-name = "fet2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet3 {
+ regulator-name = "fet3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet4 {
+ regulator-name = "fet4";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet5 {
+ regulator-name = "fet5";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet6 {
+ regulator-name = "fet6";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet7 {
+ regulator-name = "fet7";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "ldo1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2 {
+ regulator-name = "ldo2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
new file mode 100644
index 000000000..4f05d208c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -0,0 +1,78 @@
+TPS65217 family of regulators
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address
+- regulators: list of regulators provided by this controller, must be named
+ after their hardware counterparts: dcdc[1-3] and ldo[1-4]
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the given
+ device need to be present. The definition for each of these nodes is defined
+ using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle.
+
+ The valid names for regulators are:
+ tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps: tps@24 {
+ compatible = "ti,tps65217";
+ ti,pmic-shutdown-controller;
+
+ regulators {
+ dcdc1_reg: dcdc1 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: dcdc2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: dcc3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
new file mode 100644
index 000000000..fccc1d24a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -0,0 +1,23 @@
+TPS65218 family of regulators
+
+Required properties:
+For tps65218 regulators/LDOs
+- compatible:
+ - "ti,tps65218-dcdc1" for DCDC1
+ - "ti,tps65218-dcdc2" for DCDC2
+ - "ti,tps65218-dcdc3" for DCDC3
+ - "ti,tps65218-dcdc4" for DCDC4
+ - "ti,tps65218-dcdc5" for DCDC5
+ - "ti,tps65218-dcdc6" for DCDC6
+ - "ti,tps65218-ldo1" for LDO1
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+ xyz: regulator@0 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
new file mode 100644
index 000000000..8b40cac24
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -0,0 +1,135 @@
+TPS6586x family of regulators
+
+Required properties:
+- compatible: "ti,tps6586x"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO
+- gpio-controller: mark the device as a GPIO controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name (or the deprecated
+ regulator-compatible property if present), with valid values listed below.
+ The content of each sub-node is defined by the standard binding for
+ regulators; see regulator.txt.
+ sys, sm[0-2], ldo[0-9] and ldo_rtc
+- sys-supply: The input supply for SYS.
+- vin-sm0-supply: The input supply for the SM0.
+- vin-sm1-supply: The input supply for the SM1.
+- vin-sm2-supply: The input supply for the SM2.
+- vinldo01-supply: The input supply for the LDO1 and LDO2
+- vinldo23-supply: The input supply for the LDO2 and LDO3
+- vinldo4-supply: The input supply for the LDO4
+- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
+- vinldo9-supply: The input supply for the LDO9
+
+Optional properties:
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+ the system power.
+
+Each regulator is defined using the standard binding for regulators.
+
+Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
+ take care of making proper parent child relationship.
+
+Example:
+
+ pmu: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 88 0x4>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ ti,system-power-controller;
+
+ sys-supply = <&some_reg>;
+ vin-sm0-supply = <&some_reg>;
+ vin-sm1-supply = <&some_reg>;
+ vin-sm2-supply = <&some_reg>;
+ vinldo01-supply = <...>;
+ vinldo23-supply = <...>;
+ vinldo4-supply = <...>;
+ vinldo678-supply = <...>;
+ vinldo9-supply = <...>;
+
+ regulators {
+ sys_reg: sys {
+ regulator-name = "vdd_sys";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm0_reg: sm0 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm1_reg: sm1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm2_reg: sm2 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <4550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0_reg: ldo0 {
+ regulator-name = "PCIE CLK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2475000>;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
new file mode 100644
index 000000000..75b0c1669
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
@@ -0,0 +1,67 @@
+TWL family of regulators
+
+Required properties:
+For twl6030 regulators/LDOs
+- compatible:
+ - "ti,twl6030-vaux1" for VAUX1 LDO
+ - "ti,twl6030-vaux2" for VAUX2 LDO
+ - "ti,twl6030-vaux3" for VAUX3 LDO
+ - "ti,twl6030-vmmc" for VMMC LDO
+ - "ti,twl6030-vpp" for VPP LDO
+ - "ti,twl6030-vusim" for VUSIM LDO
+ - "ti,twl6030-vana" for VANA LDO
+ - "ti,twl6030-vcxio" for VCXIO LDO
+ - "ti,twl6030-vdac" for VDAC LDO
+ - "ti,twl6030-vusb" for VUSB LDO
+ - "ti,twl6030-v1v8" for V1V8 LDO
+ - "ti,twl6030-v2v1" for V2V1 LDO
+ - "ti,twl6030-vdd1" for VDD1 SMPS
+ - "ti,twl6030-vdd2" for VDD2 SMPS
+ - "ti,twl6030-vdd3" for VDD3 SMPS
+For twl6032 regulators/LDOs
+- compatible:
+ - "ti,twl6032-ldo1" for LDO1 LDO
+ - "ti,twl6032-ldo2" for LDO2 LDO
+ - "ti,twl6032-ldo3" for LDO3 LDO
+ - "ti,twl6032-ldo4" for LDO4 LDO
+ - "ti,twl6032-ldo5" for LDO5 LDO
+ - "ti,twl6032-ldo6" for LDO6 LDO
+ - "ti,twl6032-ldo7" for LDO7 LDO
+ - "ti,twl6032-ldoln" for LDOLN LDO
+ - "ti,twl6032-ldousb" for LDOUSB LDO
+ - "ti,twl6032-smps3" for SMPS3 SMPS
+ - "ti,twl6032-smps4" for SMPS4 SMPS
+ - "ti,twl6032-vio" for VIO SMPS
+For twl4030 regulators/LDOs
+- compatible:
+ - "ti,twl4030-vaux1" for VAUX1 LDO
+ - "ti,twl4030-vaux2" for VAUX2 LDO
+ - "ti,twl5030-vaux2" for VAUX2 LDO
+ - "ti,twl4030-vaux3" for VAUX3 LDO
+ - "ti,twl4030-vaux4" for VAUX4 LDO
+ - "ti,twl4030-vmmc1" for VMMC1 LDO
+ - "ti,twl4030-vmmc2" for VMMC2 LDO
+ - "ti,twl4030-vpll1" for VPLL1 LDO
+ - "ti,twl4030-vpll2" for VPLL2 LDO
+ - "ti,twl4030-vsim" for VSIM LDO
+ - "ti,twl4030-vdac" for VDAC LDO
+ - "ti,twl4030-vintana2" for VINTANA2 LDO
+ - "ti,twl4030-vio" for VIO LDO
+ - "ti,twl4030-vdd1" for VDD1 SMPS
+ - "ti,twl4030-vdd2" for VDD2 SMPS
+ - "ti,twl4030-vintana1" for VINTANA1 LDO
+ - "ti,twl4030-vintdig" for VINTDIG LDO
+ - "ti,twl4030-vusb1v5" for VUSB1V5 LDO
+ - "ti,twl4030-vusb1v8" for VUSB1V8 LDO
+ - "ti,twl4030-vusb3v1" for VUSB3V1 LDO
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+ xyz: regulator@0 {
+ compatible = "ti,twl6030-vaux1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt
new file mode 100644
index 000000000..d775f7248
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/vexpress.txt
@@ -0,0 +1,32 @@
+Versatile Express voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value: "arm,vexpress-volt"
+- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
+ (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+ for more details)
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-always-on"
+
+Optional regulator properties:
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+When no "regulator-[min|max]-microvolt" properties are defined,
+the device is treated as fixed (or rather "read-only") regulator.
+
+Example:
+ volt@0 {
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "Cores";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ };