summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/regulator')
-rw-r--r--Documentation/devicetree/bindings/regulator/da9210.txt12
-rw-r--r--Documentation/devicetree/bindings/regulator/da9211.txt47
-rw-r--r--Documentation/devicetree/bindings/regulator/mt6323-regulator.txt237
-rw-r--r--Documentation/devicetree/bindings/regulator/pwm-regulator.txt26
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt6
5 files changed, 315 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt
index 7aa9b1fa6..58065ca9e 100644
--- a/Documentation/devicetree/bindings/regulator/da9210.txt
+++ b/Documentation/devicetree/bindings/regulator/da9210.txt
@@ -1,4 +1,4 @@
-* Dialog Semiconductor DA9210 Voltage Regulator
+* Dialog Semiconductor DA9210 Multi-phase 12A DCDC BUCK Converter
Required properties:
@@ -18,8 +18,12 @@ Example:
compatible = "dlg,da9210";
reg = <0x68>;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1000000>;
+ interrupt-parent = <...>;
+ interrupts = <...>;
+
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <1600000>;
+ regulator-max-microamp = <4600000>;
regulator-boot-on;
- regulator-always-on;
};
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
index c620493e8..0f2a6f8fc 100644
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -1,7 +1,8 @@
-* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator
Required properties:
-- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215"
+- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213"
+ or "dlg,da9214" or "dlg,da9215"
- reg: I2C slave address, usually 0x68.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
@@ -30,6 +31,25 @@ Example 1) DA9211
regulator-max-microamp = <5000000>;
enable-gpios = <&gpio 27 0>;
};
+ };
+ };
+
+Example 2) DA9212
+
+ pmic: da9212@68 {
+ compatible = "dlg,da9212";
+ reg = <0x68>;
+ interrupts = <3 27>;
+
+ regulators {
+ BUCKA {
+ regulator-name = "VBUCKA";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <2000000>;
+ regulator-max-microamp = <5000000>;
+ enable-gpios = <&gpio 27 0>;
+ };
BUCKB {
regulator-name = "VBUCKB";
regulator-min-microvolt = < 300000>;
@@ -41,7 +61,7 @@ Example 1) DA9211
};
};
-Example 2) DA9213
+Example 3) DA9213
pmic: da9213@68 {
compatible = "dlg,da9213";
reg = <0x68>;
@@ -56,6 +76,24 @@ Example 2) DA9213
regulator-max-microamp = <6000000>;
enable-gpios = <&gpio 27 0>;
};
+ };
+ };
+
+Example 4) DA9214
+ pmic: da9214@68 {
+ compatible = "dlg,da9214";
+ reg = <0x68>;
+ interrupts = <3 27>;
+
+ regulators {
+ BUCKA {
+ regulator-name = "VBUCKA";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <3000000>;
+ regulator-max-microamp = <6000000>;
+ enable-gpios = <&gpio 27 0>;
+ };
BUCKB {
regulator-name = "VBUCKB";
regulator-min-microvolt = < 300000>;
@@ -67,8 +105,7 @@ Example 2) DA9213
};
};
-
-Example 3) DA9215
+Example 5) DA9215
pmic: da9215@68 {
compatible = "dlg,da9215";
reg = <0x68>;
diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
new file mode 100644
index 000000000..c35d878b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
@@ -0,0 +1,237 @@
+Mediatek MT6323 Regulator Driver
+
+All voltage regulators are defined as subnodes of the regulators node. A list
+of regulators provided by this controller are defined as subnodes of the
+PMIC's node. Each regulator is named according to its regulator type,
+buck_<name> and ldo_<name>. The definition for each of these nodes is defined
+using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+ buck_vproc, buck_vsys, buck_vpa
+LDO:
+ ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
+ ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
+ ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
+ ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
+
+Example:
+
+ pmic: mt6323 {
+ mt6323regulator: regulators {
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index ed936f0f3..3aeba9f86 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -34,20 +34,44 @@ Only required for Voltage Table Mode:
First cell is voltage in microvolts (uV)
Second cell is duty-cycle in percent (%)
+Optional properties for Continuous mode:
+- pwm-dutycycle-unit: Integer value encoding the duty cycle unit. If not
+ defined, <100> is assumed, meaning that
+ pwm-dutycycle-range contains values expressed in
+ percent.
+
+- pwm-dutycycle-range: Should contain 2 entries. The first entry is encoding
+ the dutycycle for regulator-min-microvolt and the
+ second one the dutycycle for regulator-max-microvolt.
+ Duty cycle values are expressed in pwm-dutycycle-unit.
+ If not defined, <0 100> is assumed.
+
NB: To be clear, if voltage-table is provided, then the device will be used
in Voltage Table Mode. If no voltage-table is provided, then the device will
be used in Continuous Voltage Mode.
+Optional properties:
+--------------------
+- enable-gpios: GPIO to use to enable/disable the regulator
+
Any property defined as part of the core regulator binding can also be used.
(See: ../regulator/regulator.txt)
-Continuous Voltage Example:
+Continuous Voltage With Enable GPIO Example:
pwm_regulator {
compatible = "pwm-regulator;
pwms = <&pwm1 0 8448 0>;
+ enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <1016000>;
regulator-max-microvolt = <1114000>;
regulator-name = "vdd_logic";
+ /* unit == per-mille */
+ pwm-dutycycle-unit = <1000>;
+ /*
+ * Inverted PWM logic, and the duty cycle range is limited
+ * to 30%-70%.
+ */
+ pwm-dutycycle-range <700 300>; /* */
};
Voltage Table Example:
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 46c6f3ed1..0fa3b0fac 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -113,9 +113,9 @@ pm8916:
l14, l15, l16, l17, l18
pm8941:
- s1, s2, s3, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14,
- l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
- mvs1, mvs2
+ s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+ l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
+ 5vs1, 5vs2
pm8994:
s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,