summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/rtc
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/rtc')
-rw-r--r--Documentation/devicetree/bindings/rtc/abracon,abx80x.txt30
-rw-r--r--Documentation/devicetree/bindings/rtc/armada-380-rtc.txt22
-rw-r--r--Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt15
-rw-r--r--Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt23
-rw-r--r--Documentation/devicetree/bindings/rtc/dallas,ds1339.txt18
-rw-r--r--Documentation/devicetree/bindings/rtc/digicolor-rtc.txt17
-rw-r--r--Documentation/devicetree/bindings/rtc/dw-apb.txt32
-rw-r--r--Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt30
-rw-r--r--Documentation/devicetree/bindings/rtc/imxdi-rtc.txt17
-rw-r--r--Documentation/devicetree/bindings/rtc/isil,isl12057.txt78
-rw-r--r--Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt15
-rw-r--r--Documentation/devicetree/bindings/rtc/maxim,ds1742.txt12
-rw-r--r--Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt17
-rw-r--r--Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt24
-rw-r--r--Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt16
-rw-r--r--Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt5
-rw-r--r--Documentation/devicetree/bindings/rtc/orion-rtc.txt18
-rw-r--r--Documentation/devicetree/bindings/rtc/pxa-rtc.txt14
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-cmos.txt28
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-omap.txt28
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-opal.txt16
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-palmas.txt33
-rw-r--r--Documentation/devicetree/bindings/rtc/s3c-rtc.txt23
-rw-r--r--Documentation/devicetree/bindings/rtc/sa1100-rtc.txt17
-rw-r--r--Documentation/devicetree/bindings/rtc/snvs-rtc.txt1
-rw-r--r--Documentation/devicetree/bindings/rtc/spear-rtc.txt17
-rw-r--r--Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt21
-rw-r--r--Documentation/devicetree/bindings/rtc/sun6i-rtc.txt17
-rw-r--r--Documentation/devicetree/bindings/rtc/sunxi-rtc.txt17
-rw-r--r--Documentation/devicetree/bindings/rtc/twl-rtc.txt12
-rw-r--r--Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt15
-rw-r--r--Documentation/devicetree/bindings/rtc/xgene-rtc.txt28
32 files changed, 676 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
new file mode 100644
index 000000000..be789685a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
@@ -0,0 +1,30 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+ "abracon,abx80x"
+ "abracon,ab0801"
+ "abracon,ab0803"
+ "abracon,ab0804"
+ "abracon,ab0805"
+ "abracon,ab1801"
+ "abracon,ab1803"
+ "abracon,ab1804"
+ "abracon,ab1805"
+ Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+ resistor, the other values are in ohm.
diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
new file mode 100644
index 000000000..2eb9d4ee7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
@@ -0,0 +1,22 @@
+* Real Time Clock of the Armada 38x SoCs
+
+RTC controller for the Armada 38x SoCs
+
+Required properties:
+- compatible : Should be "marvell,armada-380-rtc"
+- reg: a list of base address and size pairs, one for each entry in
+ reg-names
+- reg names: should contain:
+ * "rtc" for the RTC registers
+ * "rtc-soc" for the SoC related registers and among them the one
+ related to the interrupt.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@a3800 {
+ compatible = "marvell,armada-380-rtc";
+ reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
new file mode 100644
index 000000000..34c150577
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
@@ -0,0 +1,15 @@
+Atmel AT91RM9200 Real Time Clock
+
+Required properties:
+- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: rtc alarm/event interrupt
+
+Example:
+
+rtc@fffffe00 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffe00 0x100>;
+ interrupts = <1 4 7>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
new file mode 100644
index 000000000..6ae79d184
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
@@ -0,0 +1,23 @@
+Atmel AT91SAM9260 Real Time Timer
+
+Required properties:
+- compatible: should be: "atmel,at91sam9260-rtt"
+- reg: should encode the memory region of the RTT controller
+- interrupts: rtt alarm/event interrupt
+- clocks: should contain the 32 KHz slow clk that will drive the RTT block.
+- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store
+ the time base when the RTT is used as an RTC.
+ The first cell should point to the GPBR node and the second one
+ encode the offset within the GPBR block (or in other words, the
+ GPBR register used to store the time base).
+
+
+Example:
+
+rtt@fffffd20 {
+ compatible = "atmel,at91sam9260-rtt";
+ reg = <0xfffffd20 0x10>;
+ interrupts = <1 4 7>;
+ clocks = <&clk32k>;
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
new file mode 100644
index 000000000..916f57601
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
@@ -0,0 +1,18 @@
+* Dallas DS1339 I2C Serial Real-Time Clock
+
+Required properties:
+- compatible: Should contain "dallas,ds1339".
+- reg: I2C address for chip
+
+Optional properties:
+- trickle-resistor-ohms : Selected resistor for trickle charger
+ Values usable for ds1339 are 250, 2000, 4000
+ Should be given if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode
+ Should be given if internal trickle charger diode should be disabled
+Example:
+ ds1339: rtc@68 {
+ compatible = "dallas,ds1339";
+ trickle-resistor-ohms = <250>;
+ reg = <0x68>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt
new file mode 100644
index 000000000..d46498601
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt
@@ -0,0 +1,17 @@
+Conexant Digicolor Real Time Clock controller
+
+This binding currently supports the CX92755 SoC.
+
+Required properties:
+- compatible: should be "cnxt,cx92755-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+ rtc@f0000c30 {
+ compatible = "cnxt,cx92755-rtc";
+ reg = <0xf0000c30 0x18>;
+ interrupts = <25>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt
new file mode 100644
index 000000000..c703d51ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt
@@ -0,0 +1,32 @@
+* Designware APB timer
+
+Required properties:
+- compatible: One of:
+ "snps,dw-apb-timer"
+ "snps,dw-apb-timer-sp" <DEPRECATED>
+ "snps,dw-apb-timer-osc" <DEPRECATED>
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the timer.
+- either clocks+clock-names or clock-frequency properties
+
+Optional properties:
+- clocks : list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names : should contain "timer" and "pclk" entries, matching entries
+ in the clocks property.
+- clock-frequency: The frequency in HZ of the timer.
+- clock-freq: For backwards compatibility with picoxcell
+
+If using the clock specifiers, the pclk clock is optional, as not all
+systems may use one.
+
+
+Example:
+ timer@ffe00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 170 4>;
+ reg = <0xffe00000 0x1000>;
+ clocks = <&timer_clk>, <&timer_pclk>;
+ clock-names = "timer", "pclk";
+ };
diff --git a/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt
new file mode 100644
index 000000000..5c199ee04
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt
@@ -0,0 +1,30 @@
+Haoyu Microelectronics HYM8563 Real Time Clock
+
+The HYM8563 provides basic rtc and alarm functionality
+as well as a clock output of up to 32kHz.
+
+Required properties:
+- compatible: should be: "haoyu,hym8563"
+- reg: i2c address
+- interrupts: rtc alarm/event interrupt
+- #clock-cells: the value should be 0
+
+Optional properties:
+- clock-output-names: From common clock binding
+
+Example:
+
+hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ #clock-cells = <0>;
+};
+
+device {
+...
+ clocks = <&hym8563>;
+...
+};
diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt
new file mode 100644
index 000000000..c9d80d7da
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt
@@ -0,0 +1,17 @@
+* i.MX25 Real Time Clock controller
+
+This binding supports the following chips: i.MX25, i.MX53
+
+Required properties:
+- compatible: should be: "fsl,imx25-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+rtc@80056000 {
+ compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
+ reg = <0x80056000 2000>;
+ interrupts = <29>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
new file mode 100644
index 000000000..501c39cea
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
@@ -0,0 +1,78 @@
+Intersil ISL12057 I2C RTC/Alarm chip
+
+ISL12057 is a trivial I2C device (it has simple device tree bindings,
+consisting of a compatible field, an address and possibly an interrupt
+line).
+
+Nonetheless, it also supports an option boolean property
+("isil,irq2-can-wakeup-machine") to handle the specific use-case found
+on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104
+and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip
+(associated with the alarm supported by the driver) is not connected
+to the SoC but to a PMIC. It allows the device to be powered up when
+RTC alarm rings. In order to mark the device has a wakeup source and
+get access to the 'wakealarm' sysfs entry, this specific property can
+be set when the IRQ#2 pin of the chip is not connected to the SoC but
+can wake up the device.
+
+Required properties supported by the device:
+
+ - "compatible": must be "isil,isl12057"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+ - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source,
+ independently of the availability of an IRQ line connected to the
+ SoC.
+
+ - "interrupt-parent", "interrupts": for passing the interrupt line
+ of the SoC connected to IRQ#2 of the RTC chip.
+
+
+Example isl12057 node without IRQ#2 pin connected (no alarm support):
+
+ isl12057: isl12057@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ };
+
+
+Example isl12057 node with IRQ#2 pin connected to main SoC via MPP6 (note
+that the pinctrl-related properties below are given for completeness and
+may not be required or may be different depending on your system or
+SoC, and the main function of the MPP used as IRQ line, i.e.
+"interrupt-parent" and "interrupts" are usually sufficient):
+
+ pinctrl {
+ ...
+
+ rtc_alarm_pin: rtc_alarm_pin {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
+ ...
+
+ };
+
+ ...
+
+ isl12057: isl12057@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ pinctrl-0 = <&rtc_alarm_pin>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio0>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+
+Example isl12057 node without IRQ#2 pin connected to the SoC but to a
+PMIC, allowing the device to be started based on configured alarm:
+
+ isl12057: isl12057@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ isil,irq2-can-wakeup-machine;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt
new file mode 100644
index 000000000..a87a1e9bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt
@@ -0,0 +1,15 @@
+* NXP LPC32xx SoC Real Time Clock controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The RTC interrupt
+
+Example:
+
+ rtc@40024000 {
+ compatible = "nxp,lpc3220-rtc";
+ reg = <0x40024000 0x1000>;
+ interrupts = <52 0>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt
new file mode 100644
index 000000000..d0f937c35
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt
@@ -0,0 +1,12 @@
+* Maxim (Dallas) DS1742/DS1743 Real Time Clock
+
+Required properties:
+- compatible: Should contain "maxim,ds1742".
+- reg: Physical base address of the RTC and length of memory
+ mapped region.
+
+Example:
+ rtc: rtc@10000000 {
+ compatible = "maxim,ds1742";
+ reg = <0x10000000 0x800>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt b/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt
new file mode 100644
index 000000000..c9d3ac147
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt
@@ -0,0 +1,17 @@
+MOXA ART real-time clock
+
+Required properties:
+
+- compatible : Should be "moxa,moxart-rtc"
+- gpio-rtc-sclk : RTC sclk gpio, with zero flags
+- gpio-rtc-data : RTC data gpio, with zero flags
+- gpio-rtc-reset : RTC reset gpio, with zero flags
+
+Example:
+
+ rtc: rtc {
+ compatible = "moxa,moxart-rtc";
+ gpio-rtc-sclk = <&gpio 5 0>;
+ gpio-rtc-data = <&gpio 6 0>;
+ gpio-rtc-reset = <&gpio 7 0>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
new file mode 100644
index 000000000..b7d98ed3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
@@ -0,0 +1,24 @@
+NVIDIA Tegra20 real-time clock
+
+The Tegra RTC maintains seconds and milliseconds counters, and five alarm
+registers. The alarms and other interrupts may wake the system from low-power
+state.
+
+Required properties:
+
+- compatible : For Tegra20, must contain "nvidia,tegra20-rtc". Otherwise,
+ must contain '"nvidia,<chip>-rtc", "nvidia,tegra20-rtc"', where <chip>
+ can be tegra30, tegra114, tegra124, or tegra132.
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A single interrupt specifier.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+
+Example:
+
+timer {
+ compatible = "nvidia,tegra20-rtc";
+ reg = <0x7000e000 0x100>;
+ interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
new file mode 100644
index 000000000..5cbc0b145
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
@@ -0,0 +1,16 @@
+NXP PCF2123 SPI Real Time Clock
+
+Required properties:
+- compatible: should be: "nxp,rtc-pcf2123"
+- reg: should be the SPI slave chipselect address
+
+Optional properties:
+- spi-cs-high: PCF2123 needs chipselect high
+
+Example:
+
+rtc: nxp,rtc-pcf2123@3 {
+ compatible = "nxp,rtc-pcf2123"
+ reg = <3>
+ spi-cs-high;
+};
diff --git a/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
new file mode 100644
index 000000000..a2891ceb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
@@ -0,0 +1,5 @@
+OLPC XO-1 RTC
+~~~~~~~~~~~~~
+
+Required properties:
+ - compatible : "olpc,xo1-rtc"
diff --git a/Documentation/devicetree/bindings/rtc/orion-rtc.txt b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
new file mode 100644
index 000000000..3bf63ffa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
@@ -0,0 +1,18 @@
+* Mvebu Real Time Clock
+
+RTC controller for the Kirkwood, the Dove, the Armada 370 and the
+Armada XP SoCs
+
+Required properties:
+- compatible : Should be "marvell,orion-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@10300 {
+ compatible = "marvell,orion-rtc";
+ reg = <0xd0010300 0x20>;
+ interrupts = <50>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
new file mode 100644
index 000000000..8c6672a1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
@@ -0,0 +1,14 @@
+* PXA RTC
+
+PXA specific RTC driver.
+
+Required properties:
+- compatible : Should be "marvell,pxa-rtc"
+
+Examples:
+
+rtc@40900000 {
+ compatible = "marvell,pxa-rtc";
+ reg = <0x40900000 0x3c>;
+ interrupts = <30 31>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
new file mode 100644
index 000000000..7382989b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
@@ -0,0 +1,28 @@
+ Motorola mc146818 compatible RTC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+ - compatible : "motorola,mc146818"
+ - reg : should contain registers location and length.
+
+Optional properties:
+ - interrupts : should contain interrupt.
+ - interrupt-parent : interrupt source phandle.
+ - ctrl-reg : Contains the initial value of the control register also
+ called "Register B".
+ - freq-reg : Contains the initial value of the frequency register also
+ called "Regsiter A".
+
+"Register A" and "B" are usually initialized by the firmware (BIOS for
+instance). If this is not done, it can be performed by the driver.
+
+ISA Example:
+
+ rtc@70 {
+ compatible = "motorola,mc146818";
+ interrupts = <8 3>;
+ interrupt-parent = <&ioapic1>;
+ ctrl-reg = <2>;
+ freq-reg = <0x26>;
+ reg = <1 0x70 2>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
new file mode 100644
index 000000000..4ba4dbd34
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -0,0 +1,28 @@
+TI Real Time Clock
+
+Required properties:
+- compatible:
+ - "ti,da830-rtc" - for RTC IP used similar to that on DA8xx SoC family.
+ - "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
+ This RTC IP has special WAKE-EN Register to enable
+ Wakeup generation for event Alarm. It can also be
+ used to control an external PMIC via the
+ pmic_power_en pin.
+- reg: Address range of rtc register set
+- interrupts: rtc timer, alarm interrupts in order
+- interrupt-parent: phandle for the interrupt controller
+
+Optional properties:
+- system-power-controller: whether the rtc is controlling the system power
+ through pmic_power_en
+
+Example:
+
+rtc@1c23000 {
+ compatible = "ti,da830-rtc";
+ reg = <0x23000 0x1000>;
+ interrupts = <19
+ 19>;
+ interrupt-parent = <&intc>;
+ system-power-controller;
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-opal.txt b/Documentation/devicetree/bindings/rtc/rtc-opal.txt
new file mode 100644
index 000000000..af87e5eca
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-opal.txt
@@ -0,0 +1,16 @@
+IBM OPAL real-time clock
+------------------------
+
+Required properties:
+- comapatible: Should be "ibm,opal-rtc"
+
+Optional properties:
+- has-tpo: Decides if the wakeup is supported or not.
+
+Example:
+ rtc {
+ compatible = "ibm,opal-rtc";
+ has-tpo;
+ phandle = <0x10000029>;
+ linux,phandle = <0x10000029>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
new file mode 100644
index 000000000..adbccc0a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
@@ -0,0 +1,33 @@
+Palmas RTC controller bindings
+
+Required properties:
+- compatible:
+ - "ti,palmas-rtc" for palma series of the RTC controller
+- interrupt-parent: Parent interrupt device, must be handle of palmas node.
+- interrupts: Interrupt number of RTC submodule on device.
+
+Optional properties:
+
+- ti,backup-battery-chargeable: The Palmas series device like TPS65913 or
+ TPS80036 supports the backup battery for powering the RTC when main
+ battery is removed or in very low power state. The backup battery
+ can be chargeable or non-chargeable. This flag will tells whether
+ battery is chargeable or not. If charging battery then driver can
+ enable the charging.
+- ti,backup-battery-charge-high-current: Enable high current charging in
+ backup battery. Device supports the < 100mA and > 100mA charging.
+ The high current will be > 100mA. Absence of this property will
+ charge battery to lower current i.e. < 100mA.
+
+Example:
+ palmas: tps65913@58 {
+ ...
+ palmas_rtc: rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&palmas>;
+ interrupts = <8 0>;
+ ti,backup-battery-chargeable;
+ ti,backup-battery-charge-high-current;
+ };
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
new file mode 100644
index 000000000..ab757b84d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -0,0 +1,23 @@
+* Samsung's S3C Real Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+ * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc.
+ * "samsung,s3c2416-rtc" - for controllers compatible with s3c2416 rtc.
+ * "samsung,s3c2443-rtc" - for controllers compatible with s3c2443 rtc.
+ * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
+ * "samsung,exynos3250-rtc" - for controllers compatible with exynos3250 rtc.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Two interrupt numbers to the cpu should be specified. First
+ interrupt number is the rtc alarm interrupt and second interrupt number
+ is the rtc tick interrupt. The number of cells representing a interrupt
+ depends on the parent interrupt controller.
+
+Example:
+
+ rtc@10070000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <44 0 45 0>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
new file mode 100644
index 000000000..0cda19ad4
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
@@ -0,0 +1,17 @@
+* Marvell Real Time Clock controller
+
+Required properties:
+- compatible: should be "mrvl,sa1100-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Should be two. The first interrupt number is the rtc alarm
+ interrupt and the second interrupt number is the rtc hz interrupt.
+- interrupt-names: Assign name of irq resource.
+
+Example:
+ rtc: rtc@d4010000 {
+ compatible = "mrvl,mmp-rtc";
+ reg = <0xd4010000 0x1000>;
+ interrupts = <5>, <6>;
+ interrupt-name = "rtc 1Hz", "rtc alarm";
+ };
diff --git a/Documentation/devicetree/bindings/rtc/snvs-rtc.txt b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt
new file mode 100644
index 000000000..fb61ed77a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt
@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt for details.
diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
new file mode 100644
index 000000000..ca67ac621
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
@@ -0,0 +1,17 @@
+* SPEAr RTC
+
+Required properties:
+- compatible : "st,spear600-rtc"
+- reg : Address range of the rtc registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupt: Should contain the rtc interrupt number
+
+Example:
+
+ rtc@fc000000 {
+ compatible = "st,spear600-rtc";
+ reg = <0xfc000000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <12>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
new file mode 100644
index 000000000..fa6a94226
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
@@ -0,0 +1,21 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+ * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: rtc alarm interrupt
+
+Optional properties:
+- stmp,crystal-freq: override crystal frequency as determined from fuse bits.
+ Only <32000> and <32768> are possible for the hardware. Use <0> for
+ "no crystal".
+
+Example:
+
+rtc@80056000 {
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+ reg = <0x80056000 2000>;
+ interrupts = <29>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
new file mode 100644
index 000000000..f007e428a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
@@ -0,0 +1,17 @@
+* sun6i Real Time Clock
+
+RTC controller for the Allwinner A31
+
+Required properties:
+- compatible : Should be "allwinner,sun6i-a31-rtc"
+- reg : physical base address of the controller and length of
+ memory mapped region.
+- interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order.
+
+Example:
+
+rtc: rtc@01f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x54>;
+ interrupts = <0 40 4>, <0 41 4>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt
new file mode 100644
index 000000000..6983aad37
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt
@@ -0,0 +1,17 @@
+* sun4i/sun7i Real Time Clock
+
+RTC controller for the Allwinner A10/A20
+
+Required properties:
+- compatible : Should be "allwinner,sun4i-a10-rtc" or "allwinner,sun7i-a20-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc: rtc@01c20d00 {
+ compatible = "allwinner,sun4i-a10-rtc";
+ reg = <0x01c20d00 0x20>;
+ interrupts = <24>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/twl-rtc.txt b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
new file mode 100644
index 000000000..596e0c97b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
@@ -0,0 +1,12 @@
+* TI twl RTC
+
+The TWL family (twl4030/6030) contains a RTC.
+
+Required properties:
+- compatible : Should be twl4030-rtc
+
+Examples:
+
+rtc@0 {
+ compatible = "ti,twl4030-rtc";
+};
diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
new file mode 100644
index 000000000..3c0484c49
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Realtime Clock Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-rtc"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : alarm interrupt
+
+Example:
+
+ rtc@d8100000 {
+ compatible = "via,vt8500-rtc";
+ reg = <0xd8100000 0x10000>;
+ interrupts = <48>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/xgene-rtc.txt b/Documentation/devicetree/bindings/rtc/xgene-rtc.txt
new file mode 100644
index 000000000..fd195c358
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/xgene-rtc.txt
@@ -0,0 +1,28 @@
+* APM X-Gene Real Time Clock
+
+RTC controller for the APM X-Gene Real Time Clock
+
+Required properties:
+- compatible : Should be "apm,xgene-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the RTC.
+- #clock-cells: Should be 1.
+- clocks: Reference to the clock entry.
+
+Example:
+
+rtcclk: rtcclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "rtcclk";
+};
+
+rtc: rtc@10510000 {
+ compatible = "apm,xgene-rtc";
+ reg = <0x0 0x10510000 0x0 0x400>;
+ interrupts = <0x0 0x46 0x4>;
+ #clock-cells = <1>;
+ clocks = <&rtcclk 0>;
+};