diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/qcom')
3 files changed, 120 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt index 5cc82b835..af9ca3722 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt @@ -68,7 +68,7 @@ important. Value type: <u32> Definition: must be 2 - denoting the bit in the entry and IRQ flags -- #qcom,state-cells: +- #qcom,smem-state-cells: Usage: required for outgoing entries Value type: <u32> Definition: must be 1 - denoting the bit in the entry @@ -92,7 +92,7 @@ wcnss-smp2p { wcnss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; wcnss_smp2p_in: slave-kernel { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt index a6634c708..2993b5a97 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt @@ -51,7 +51,7 @@ important. Definition: specifies the offset, in words, of the first bit for this entry -- #qcom,state-cells: +- #qcom,smem-state-cells: Usage: required for local entry Value type: <u32> Definition: must be 1 - denotes bit number @@ -91,7 +91,7 @@ smsm { apps_smsm: apps@0 { reg = <0>; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; wcnss_smsm: wcnss@7 { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt new file mode 100644 index 000000000..4ea39e918 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt @@ -0,0 +1,116 @@ +Qualcomm WCNSS Binding + +This binding describes the Qualcomm WCNSS hardware. It consists of control +block and a BT, WiFi and FM radio block, all using SMD as command channels. + +- compatible: + Usage: required + Value type: <string> + Definition: must be: "qcom,wcnss", + +- qcom,smd-channel: + Usage: required + Value type: <string> + Definition: standard SMD property specifying the SMD channel used for + communication with the WiFi firmware. + Should be "WCNSS_CTRL". + +- qcom,mmio: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to a node specifying the wcnss "ccu" and "dxe" + register blocks. The node must be compatible with one of + the following: + "qcom,riva", + "qcom,pronto" + += SUBNODES +The subnodes of the wcnss node are optional and describe the individual blocks in +the WCNSS. + +== Bluetooth +The following properties are defined to the bluetooth node: + +- compatible: + Usage: required + Value type: <string> + Definition: must be: + "qcom,wcnss-bt" + +== WiFi +The following properties are defined to the WiFi node: + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,wcnss-wlan", + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the "rx" and "tx" interrupts + +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: must contain "rx" and "tx" + +- qcom,smem-state: + Usage: required + Value type: <prop-encoded-array> + Definition: should reference the tx-enable and tx-rings-empty SMEM states + +- qcom,smem-state-names: + Usage: required + Value type: <stringlist> + Definition: must contain "tx-enable" and "tx-rings-empty" + += EXAMPLE +The following example represents a SMD node, with one edge representing the +"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks +described; as found on the 8974 platform. + +smd { + compatible = "qcom,smd"; + + pronto-edge { + interrupts = <0 142 1>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + #address-cells = <1>; + #size-cells = <1>; + + qcom,mmio = <&pronto>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + + wlan { + compatible = "qcom,wcnss-wlan"; + + interrupts = <0 145 0>, <0 146 0>; + interrupt-names = "tx", "rx"; + + qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; +}; + +soc { + pronto: pronto { + compatible = "qcom,pronto"; + + reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + }; +}; |