diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc')
-rw-r--r-- | Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 63 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/soc/rockchip/power_domain.txt | 21 |
2 files changed, 84 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt new file mode 100644 index 000000000..e284e4e1c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt @@ -0,0 +1,63 @@ +* Run Control and Power Management +------------------------------------------- +The RCPM performs all device-level tasks associated with device run control +and power management. + +Required properites: + - reg : Offset and length of the register set of the RCPM block. + - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the + fsl,rcpm-wakeup property. + - compatible : Must contain a chip-specific RCPM block compatible string + and (if applicable) may contain a chassis-version RCPM compatible + string. Chip-specific strings are of the form "fsl,<chip>-rcpm", + such as: + * "fsl,p2041-rcpm" + * "fsl,p5020-rcpm" + * "fsl,t4240-rcpm" + + Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>", + such as: + * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm + * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm + * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm + +All references to "1.0" and "2.0" refer to the QorIQ chassis version to +which the chip complies. +Chassis Version Example Chips +--------------- ------------------------------- +1.0 p4080, p5020, p5040, p2041, p3041 +2.0 t4240, b4860, b4420 +2.1 t1040, ls1021 + +Example: +The RCPM node for T4240: + rcpm: global-utilities@e2000 { + compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + fsl,#rcpm-wakeup-cells = <2>; + }; + +* Freescale RCPM Wakeup Source Device Tree Bindings +------------------------------------------- +Required fsl,rcpm-wakeup property should be added to a device node if the device +can be used as a wakeup source. + + - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR + register cells. The number of IPPDEXPCR register cells is defined in + "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is + the bit mask that should be set in IPPDEXPCR0, and the second register + cell is for IPPDEXPCR1, and so on. + + Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a + mechanism for keeping certain blocks awake during STANDBY and MEM, in + order to use them as wake-up sources. + +Example: + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>; + clock-names = "ipg"; + fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>; + }; diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt index 112756e11..13dc6a3fd 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt @@ -6,6 +6,7 @@ powered up/down by software based on different application scenes to save power. Required properties for power domain controller: - compatible: Should be one of the following. "rockchip,rk3288-power-controller" - for RK3288 SoCs. + "rockchip,rk3368-power-controller" - for RK3368 SoCs. - #power-domain-cells: Number of cells in a power-domain specifier. Should be 1 for multiple PM domains. - #address-cells: Should be 1. @@ -14,6 +15,7 @@ Required properties for power domain controller: Required properties for power domain sub nodes: - reg: index of the power domain, should use macros in: "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. + "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain. - clocks (optional): phandles to clocks which need to be enabled while power domain switches state. @@ -31,11 +33,24 @@ Example: }; }; + power: power-controller { + compatible = "rockchip,rk3368-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_gpu_1 { + reg = <RK3368_PD_GPU_1>; + clocks = <&cru ACLK_GPU_CFG>; + }; + }; + Node of a device using power domains must have a power-domains property, containing a phandle to the power device node and an index specifying which power domain to use. The index should use macros in: "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain. + "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain. Example of the node using power domain: @@ -44,3 +59,9 @@ Example of the node using power domain: power-domains = <&power RK3288_PD_GPU>; /* ... */ }; + + node { + /* ... */ + power-domains = <&power RK3368_PD_GPU_1>; + /* ... */ + }; |