summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/rt5659.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/rt5659.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/rt5659.txt75
1 files changed, 75 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
new file mode 100644
index 000000000..5f79e7fde
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -0,0 +1,75 @@
+RT5659/RT5658 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5659" or "realtek,rt5658".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in3-differential
+- realtek,in4-differential
+ Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+ 0: dmic1 is not used
+ 1: using IN2N pin as dmic1 data pin
+ 2: using GPIO5 pin as dmic1 data pin
+ 3: using GPIO9 pin as dmic1 data pin
+ 4: using GPIO11 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+ 0: dmic2 is not used
+ 1: using IN2P pin as dmic2 data pin
+ 2: using GPIO6 pin as dmic2 data pin
+ 3: using GPIO10 pin as dmic2 data pin
+ 4: using GPIO12 pin as dmic2 data pin
+
+- realtek,jd-src
+ 0: No JD is used
+ 1: using JD3 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+ * DMIC L1
+ * DMIC R1
+ * DMIC L2
+ * DMIC R2
+ * IN1P
+ * IN1N
+ * IN2P
+ * IN2N
+ * IN3P
+ * IN3N
+ * IN4P
+ * IN4N
+ * HPOL
+ * HPOR
+ * SPOL
+ * SPOR
+ * LOUTL
+ * LOUTR
+ * MONOOUT
+ * PDML
+ * PDMR
+ * SPDIF
+
+Example:
+
+rt5659 {
+ compatible = "realtek,rt5659";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};