summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/ufs
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/ufs')
-rw-r--r--Documentation/devicetree/bindings/ufs/ufs-qcom.txt58
-rw-r--r--Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt11
2 files changed, 68 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
new file mode 100644
index 000000000..070baf4d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
@@ -0,0 +1,58 @@
+* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
+
+UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
+Each UFS PHY node should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS PHY node.
+
+Required properties:
+- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm"
+ or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
+- reg : should contain PHY register address space (mandatory),
+- reg-names : indicates various resources passed to driver (via reg proptery) by name.
+ Required "reg-names" is "phy_mem".
+- #phy-cells : This property shall be set to 0
+- vdda-phy-supply : phandle to main PHY supply for analog domain
+- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "ref_clk_src", "ref_clk",
+ "tx_iface_clk" & "rx_iface_clk" are mandatory but
+ "ref_clk_parent" is optional
+
+Optional properties:
+- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
+- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
+- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
+- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
+- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
+
+Example:
+
+ ufsphy1: ufsphy@0xfc597000 {
+ compatible = "qcom,ufs-phy-qmp-20nm";
+ reg = <0xfc597000 0x800>;
+ reg-names = "phy_mem";
+ #phy-cells = <0>;
+ vdda-phy-supply = <&pma8084_l4>;
+ vdda-pll-supply = <&pma8084_l12>;
+ vdda-phy-max-microamp = <50000>;
+ vdda-pll-max-microamp = <1000>;
+ clock-names = "ref_clk_src",
+ "ref_clk_parent",
+ "ref_clk",
+ "tx_iface_clk",
+ "rx_iface_clk";
+ clocks = <&clock_rpm clk_ln_bb_clk>,
+ <&clock_gcc clk_pcie_1_phy_ldo >,
+ <&clock_gcc clk_ufs_phy_ldo>,
+ <&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
+ <&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
+ };
+
+ ufshc@0xfc598000 {
+ ...
+ phys = <&ufsphy1>;
+ phy-names = "ufsphy";
+ };
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 53579197e..03c0e989e 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -4,11 +4,18 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
Each UFS controller instance should have its own node.
Required properties:
-- compatible : compatible list, contains "jedec,ufs-1.1"
+- compatible : must contain "jedec,ufs-1.1", may also list one or more
+ of the following:
+ "qcom,msm8994-ufshc"
+ "qcom,msm8996-ufshc"
+ "qcom,ufshc"
- interrupts : <interrupt mapping for UFS host controller IRQ>
- reg : <registers mapping>
Optional properties:
+- phys : phandle to UFS PHY node
+- phy-names : the string "ufsphy" when is found in a node, along
+ with "phys" attribute, provides phandle to UFS PHY node
- vdd-hba-supply : phandle to UFS host controller supply regulator node
- vcc-supply : phandle to VCC supply regulator node
- vccq-supply : phandle to VCCQ supply regulator node
@@ -54,4 +61,6 @@ Example:
clocks = <&core 0>, <&ref 0>, <&iface 0>;
clock-names = "core_clk", "ref_clk", "iface_clk";
freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+ phys = <&ufsphy1>;
+ phy-names = "ufsphy";
};