diff options
Diffstat (limited to 'Documentation/devicetree/bindings/video/rockchip-vop.txt')
-rw-r--r-- | Documentation/devicetree/bindings/video/rockchip-vop.txt | 58 |
1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/video/rockchip-vop.txt b/Documentation/devicetree/bindings/video/rockchip-vop.txt deleted file mode 100644 index d15351f23..000000000 --- a/Documentation/devicetree/bindings/video/rockchip-vop.txt +++ /dev/null @@ -1,58 +0,0 @@ -device-tree bindings for rockchip soc display controller (vop) - -VOP (Visual Output Processor) is the Display Controller for the Rockchip -series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of the following - "rockchip,rk3288-vop"; - -- interrupts: should contain a list of all VOP IP block interrupts in the - order: VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: Must contain - aclk_vop: for ddr buffer transfer. - hclk_vop: for ahb bus to R/W the phy regs. - dclk_vop: pixel clock. - -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - axi - - ahb - - dclk - -- iommus: required a iommu node - -- port: A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: -SoC specific DT entry: - vopb: vopb@ff930000 { - compatible = "rockchip,rk3288-vop"; - reg = <0xff930000 0x19c>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; - reset-names = "axi", "ahb", "dclk"; - iommus = <&vopb_mmu>; - vopb_out: port { - #address-cells = <1>; - #size-cells = <0>; - vopb_out_edp: endpoint@0 { - reg = <0>; - remote-endpoint=<&edp_in_vopb>; - }; - vopb_out_hdmi: endpoint@1 { - reg = <1>; - remote-endpoint=<&hdmi_in_vopb>; - }; - }; - }; |