summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/watchdog
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/watchdog')
-rw-r--r--Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt35
-rw-r--r--Documentation/devicetree/bindings/watchdog/atmel-wdt.txt2
-rw-r--r--Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt19
-rw-r--r--Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt12
4 files changed, 64 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
new file mode 100644
index 000000000..f7cc7c060
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
@@ -0,0 +1,35 @@
+* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+Required properties:
+- compatible: "atmel,sama5d4-wdt"
+- reg: base physical address and length of memory mapped region.
+
+Optional properties:
+- timeout-sec: watchdog timeout value (in seconds).
+- interrupts: interrupt number to the CPU.
+- atmel,watchdog-type: should be "hardware" or "software".
+ "hardware": enable watchdog fault reset. A watchdog fault triggers
+ watchdog reset.
+ "software": enable watchdog fault interrupt. A watchdog fault asserts
+ watchdog interrupt.
+- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
+ in idle state.
+ CAUTION: This property should be used with care, it actually makes the
+ watchdog not counting when the CPU is in idle state, therefore the
+ watchdog reset time depends on mean CPU usage and will not reset at all
+ if the CPU stop working while it is in idle state, which is probably
+ not what you want.
+- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
+ in debug state.
+
+Example:
+ watchdog@fc068640 {
+ compatible = "atmel,sama5d4-wdt";
+ reg = <0xfc068640 0x10>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+ timeout-sec = <10>;
+ atmel,watchdog-type = "hardware";
+ atmel,dbg-halt;
+ atmel,idle-halt;
+ status = "okay";
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index a4d869744..86fa6de10 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible: must be "atmel,at91sam9260-wdt".
- reg: physical base address of the controller and length of memory mapped
region.
+- clocks: phandle to input clock.
Optional properties:
- timeout-sec: contains the watchdog timeout in seconds.
@@ -39,6 +40,7 @@ Example:
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
timeout-sec = <15>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
diff --git a/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
new file mode 100644
index 000000000..09f6b2496
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
@@ -0,0 +1,19 @@
+* NXP LPC18xx Watchdog Timer (WDT)
+
+Required properties:
+- compatible: Should be "nxp,lpc1850-wwdt"
+- reg: Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdtclk" and "reg"; the watchdog counter
+ clock and register interface clock respectively.
+- interrupts: Should contain WDT interrupt
+
+Examples:
+
+watchdog@40080000 {
+ compatible = "nxp,lpc1850-wwdt";
+ reg = <0x40080000 0x24>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+ clock-names = "wdtclk", "reg";
+ interrupts = <49>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
index 388c88a01..039c5ca45 100644
--- a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
@@ -1,9 +1,11 @@
STMicroelectronics Low Power Controller (LPC) - Watchdog
========================================================
-LPC currently supports Watchdog OR Real Time Clock functionality.
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
[See: ../rtc/rtc-st-lpc.txt for RTC options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
Required properties
@@ -12,9 +14,11 @@ Required properties
- reg : LPC registers base address + size
- interrupts : LPC interrupt line number and associated flags
- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt)
-- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
- ST_LPC_MODE_WDT [1]. One (and only one) mode must be
- selected.
+- st,lpc-mode : The LPC can run either one of three modes:
+ ST_LPC_MODE_RTC [0]
+ ST_LPC_MODE_WDT [1]
+ ST_LPC_MODE_CLKSRC [2]
+ One (and only one) mode must be selected.
Required properties [watchdog mode]