summaryrefslogtreecommitdiff
path: root/Documentation/filesystems/pohmelfs/info.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/filesystems/pohmelfs/info.txt')
-rw-r--r--Documentation/filesystems/pohmelfs/info.txt99
1 files changed, 99 insertions, 0 deletions
diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt
new file mode 100644
index 000000000..db2e41393
--- /dev/null
+++ b/Documentation/filesystems/pohmelfs/info.txt
@@ -0,0 +1,99 @@
+POHMELFS usage information.
+
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
+idx=%u
+ Each mountpoint is associated with a special index via this option.
+ Administrator can add or remove servers from the given index, so all mounts,
+ which were attached to it, are updated.
+ Default it is 0.
+
+trans_scan_timeout=%u
+ This timeout, expressed in milliseconds, specifies time to scan transaction
+ trees looking for stale requests, which have to be resent, or if number of
+ retries exceed specified limit, dropped with error.
+ Default is 5 seconds.
+
+drop_scan_timeout=%u
+ Internal timeout, expressed in milliseconds, which specifies how frequently
+ inodes marked to be dropped are freed. It also specifies how frequently
+ the system checks that servers have to be added or removed from current working set.
+ Default is 1 second.
+
+wait_on_page_timeout=%u
+ Number of milliseconds to wait for reply from remote server for data reading command.
+ If this timeout is exceeded, reading returns an error.
+ Default is 5 seconds.
+
+trans_retries=%u
+ This is the number of times that a transaction will be resent to a server that did
+ not answer for the last @trans_scan_timeout milliseconds.
+ When the number of resends exceeds this limit, the transaction is completed with error.
+ Default is 5 resends.
+
+crypto_thread_num=%u
+ Number of crypto processing threads. Threads are used both for RX and TX traffic.
+ Default is 2, or no threads if crypto operations are not supported.
+
+trans_max_pages=%u
+ Maximum number of pages in a single transaction. This parameter also controls
+ the number of pages, allocated for crypto processing (each crypto thread has
+ pool of pages, the number of which is equal to 'trans_max_pages'.
+ Default is 100 pages.
+
+crypto_fail_unsupported
+ If specified, mount will fail if the server does not support requested crypto operations.
+ By default mount will disable non-matching crypto operations.
+
+mcache_timeout=%u
+ Maximum number of milliseconds to wait for the mcache objects to be processed.
+ Mcache includes locks (given lock should be granted by server), attributes (they should be
+ fully received in the given timeframe).
+ Default is 5 seconds.
+
+Usage examples.
+
+Add server server1.net:1025 into the working set with index $idx
+with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+
+Mount filesystem with given index $idx to /mnt mountpoint.
+Client will connect to all servers specified in the working set via previous command:
+mount -t pohmel -o idx=$idx q /mnt
+
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
+
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
+
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
+
+Server installation.
+
+Creating a server, which listens at port 1025 and 0.0.0.0 address.
+Working root directory (note, that server chroots there, so you have to have appropriate permissions)
+is set to /mnt, server will negotiate hash/cipher with client, in case client requested it, there
+are appropriate key files.
+Number of working threads is set to 10.
+
+# ./fserver -a 0.0.0.0 -p 1025 -r /mnt -w 10 -K hash_key -k cipher_key
+
+ -A 6 - listen on ipv6 address. Default: Disabled.
+ -r root - path to root directory. Default: /tmp.
+ -a addr - listen address. Default: 0.0.0.0.
+ -p port - listen port. Default: 1025.
+ -w workers - number of workers per connected client. Default: 1.
+ -K file - hash key size. Default: none.
+ -k file - cipher key size. Default: none.
+ -h - this help.
+
+Number of worker threads specifies how many workers will be created for each client.
+Bulk single-client transafers usually are better handled with smaller number (like 1-3).