summaryrefslogtreecommitdiff
path: root/Documentation/gpio
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/gpio')
-rw-r--r--Documentation/gpio/consumer.txt30
-rw-r--r--Documentation/gpio/gpio-legacy.txt9
-rw-r--r--Documentation/gpio/sysfs.txt8
3 files changed, 15 insertions, 32 deletions
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index c21c1313f..75542b91b 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -241,18 +241,18 @@ Set multiple GPIO outputs with a single function call
-----------------------------------------------------
The following functions set the output values of an array of GPIOs:
- void gpiod_set_array(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_raw_array(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_array_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
- void gpiod_set_raw_array_cansleep(unsigned int array_size,
- struct gpio_desc **desc_array,
- int *value_array)
+ void gpiod_set_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
+ void gpiod_set_raw_array_value(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
+ void gpiod_set_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
+ void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+ struct gpio_desc **desc_array,
+ int *value_array)
The array can be an arbitrary set of GPIOs. The functions will try to set
GPIOs belonging to the same bank or chip simultaneously if supported by the
@@ -271,8 +271,8 @@ matches the desired group of GPIOs, those GPIOs can be set by simply using
the struct gpio_descs returned by gpiod_get_array():
struct gpio_descs *my_gpio_descs = gpiod_get_array(...);
- gpiod_set_array(my_gpio_descs->ndescs, my_gpio_descs->desc,
- my_gpio_values);
+ gpiod_set_array_value(my_gpio_descs->ndescs, my_gpio_descs->desc,
+ my_gpio_values);
It is also possible to set a completely arbitrary array of descriptors. The
descriptors may be obtained using any combination of gpiod_get() and
@@ -290,7 +290,7 @@ corresponding to a given GPIO using the following call:
int gpiod_to_irq(const struct gpio_desc *desc)
-It will return an IRQ number, or an negative errno code if the mapping can't be
+It will return an IRQ number, or a negative errno code if the mapping can't be
done (most likely because that particular GPIO cannot be used as IRQ). It is an
unchecked error to use a GPIO that wasn't set up as an input using
gpiod_direction_input(), or to use an IRQ number that didn't originally come
diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt
index 6f83fa965..79ab5648d 100644
--- a/Documentation/gpio/gpio-legacy.txt
+++ b/Documentation/gpio/gpio-legacy.txt
@@ -751,9 +751,6 @@ requested using gpio_request():
int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
- /* change the polarity of a GPIO node in sysfs */
- int gpio_sysfs_set_active_low(unsigned gpio, int value);
-
After a kernel driver requests a GPIO, it may only be made available in
the sysfs interface by gpio_export(). The driver can control whether the
signal direction may change. This helps drivers prevent userspace code
@@ -767,9 +764,3 @@ After the GPIO has been exported, gpio_export_link() allows creating
symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
use this to provide the interface under their own device in sysfs with
a descriptive name.
-
-Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity
-differences between boards from user space. This only affects the
-sysfs interface. Polarity change can be done both before and after
-gpio_export(), and previously enabled poll(2) support for either
-rising or falling edge will be reconfigured to follow this setting.
diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt
index c2c3a97f8..535b6a8a7 100644
--- a/Documentation/gpio/sysfs.txt
+++ b/Documentation/gpio/sysfs.txt
@@ -132,9 +132,6 @@ requested using gpio_request():
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
- /* change the polarity of a GPIO node in sysfs */
- int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
-
After a kernel driver requests a GPIO, it may only be made available in
the sysfs interface by gpiod_export(). The driver can control whether the
signal direction may change. This helps drivers prevent userspace code
@@ -148,8 +145,3 @@ After the GPIO has been exported, gpiod_export_link() allows creating
symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
use this to provide the interface under their own device in sysfs with
a descriptive name.
-
-Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
-differences between boards from user space. Polarity change can be done both
-before and after gpiod_export(), and previously enabled poll(2) support for
-either rising or falling edge will be reconfigured to follow this setting.