summaryrefslogtreecommitdiff
path: root/Documentation/media/kapi/v4l2-subdev.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/media/kapi/v4l2-subdev.rst')
-rw-r--r--Documentation/media/kapi/v4l2-subdev.rst445
1 files changed, 445 insertions, 0 deletions
diff --git a/Documentation/media/kapi/v4l2-subdev.rst b/Documentation/media/kapi/v4l2-subdev.rst
new file mode 100644
index 000000000..d767b61e9
--- /dev/null
+++ b/Documentation/media/kapi/v4l2-subdev.rst
@@ -0,0 +1,445 @@
+V4L2 sub-devices
+----------------
+
+Many drivers need to communicate with sub-devices. These devices can do all
+sort of tasks, but most commonly they handle audio and/or video muxing,
+encoding or decoding. For webcams common sub-devices are sensors and camera
+controllers.
+
+Usually these are I2C devices, but not necessarily. In order to provide the
+driver with a consistent interface to these sub-devices the
+:c:type:`v4l2_subdev` struct (v4l2-subdev.h) was created.
+
+Each sub-device driver must have a :c:type:`v4l2_subdev` struct. This struct
+can be stand-alone for simple sub-devices or it might be embedded in a larger
+struct if more state information needs to be stored. Usually there is a
+low-level device struct (e.g. ``i2c_client``) that contains the device data as
+setup by the kernel. It is recommended to store that pointer in the private
+data of :c:type:`v4l2_subdev` using :c:func:`v4l2_set_subdevdata`. That makes
+it easy to go from a :c:type:`v4l2_subdev` to the actual low-level bus-specific
+device data.
+
+You also need a way to go from the low-level struct to :c:type:`v4l2_subdev`.
+For the common i2c_client struct the i2c_set_clientdata() call is used to store
+a :c:type:`v4l2_subdev` pointer, for other busses you may have to use other
+methods.
+
+Bridges might also need to store per-subdev private data, such as a pointer to
+bridge-specific per-subdev private data. The :c:type:`v4l2_subdev` structure
+provides host private data for that purpose that can be accessed with
+:c:func:`v4l2_get_subdev_hostdata` and :cpp:func:`v4l2_set_subdev_hostdata`.
+
+From the bridge driver perspective, you load the sub-device module and somehow
+obtain the :c:type:`v4l2_subdev` pointer. For i2c devices this is easy: you call
+``i2c_get_clientdata()``. For other busses something similar needs to be done.
+Helper functions exists for sub-devices on an I2C bus that do most of this
+tricky work for you.
+
+Each :c:type:`v4l2_subdev` contains function pointers that sub-device drivers
+can implement (or leave ``NULL`` if it is not applicable). Since sub-devices can
+do so many different things and you do not want to end up with a huge ops struct
+of which only a handful of ops are commonly implemented, the function pointers
+are sorted according to category and each category has its own ops struct.
+
+The top-level ops struct contains pointers to the category ops structs, which
+may be NULL if the subdev driver does not support anything from that category.
+
+It looks like this:
+
+.. code-block:: c
+
+ struct v4l2_subdev_core_ops {
+ int (*log_status)(struct v4l2_subdev *sd);
+ int (*init)(struct v4l2_subdev *sd, u32 val);
+ ...
+ };
+
+ struct v4l2_subdev_tuner_ops {
+ ...
+ };
+
+ struct v4l2_subdev_audio_ops {
+ ...
+ };
+
+ struct v4l2_subdev_video_ops {
+ ...
+ };
+
+ struct v4l2_subdev_pad_ops {
+ ...
+ };
+
+ struct v4l2_subdev_ops {
+ const struct v4l2_subdev_core_ops *core;
+ const struct v4l2_subdev_tuner_ops *tuner;
+ const struct v4l2_subdev_audio_ops *audio;
+ const struct v4l2_subdev_video_ops *video;
+ const struct v4l2_subdev_pad_ops *video;
+ };
+
+The core ops are common to all subdevs, the other categories are implemented
+depending on the sub-device. E.g. a video device is unlikely to support the
+audio ops and vice versa.
+
+This setup limits the number of function pointers while still making it easy
+to add new ops and categories.
+
+A sub-device driver initializes the :c:type:`v4l2_subdev` struct using:
+
+ :c:func:`v4l2_subdev_init <v4l2_subdev_init>`
+ (:c:type:`sd <v4l2_subdev>`, &\ :c:type:`ops <v4l2_subdev_ops>`).
+
+
+Afterwards you need to initialize :c:type:`sd <v4l2_subdev>`->name with a
+unique name and set the module owner. This is done for you if you use the
+i2c helper functions.
+
+If integration with the media framework is needed, you must initialize the
+:c:type:`media_entity` struct embedded in the :c:type:`v4l2_subdev` struct
+(entity field) by calling :c:func:`media_entity_pads_init`, if the entity has
+pads:
+
+.. code-block:: c
+
+ struct media_pad *pads = &my_sd->pads;
+ int err;
+
+ err = media_entity_pads_init(&sd->entity, npads, pads);
+
+The pads array must have been previously initialized. There is no need to
+manually set the struct :c:type:`media_entity` function and name fields, but the
+revision field must be initialized if needed.
+
+A reference to the entity will be automatically acquired/released when the
+subdev device node (if any) is opened/closed.
+
+Don't forget to cleanup the media entity before the sub-device is destroyed:
+
+.. code-block:: c
+
+ media_entity_cleanup(&sd->entity);
+
+If the subdev driver intends to process video and integrate with the media
+framework, it must implement format related functionality using
+:c:type:`v4l2_subdev_pad_ops` instead of :c:type:`v4l2_subdev_video_ops`.
+
+In that case, the subdev driver may set the link_validate field to provide
+its own link validation function. The link validation function is called for
+every link in the pipeline where both of the ends of the links are V4L2
+sub-devices. The driver is still responsible for validating the correctness
+of the format configuration between sub-devices and video nodes.
+
+If link_validate op is not set, the default function
+:c:func:`v4l2_subdev_link_validate_default` is used instead. This function
+ensures that width, height and the media bus pixel code are equal on both source
+and sink of the link. Subdev drivers are also free to use this function to
+perform the checks mentioned above in addition to their own checks.
+
+There are currently two ways to register subdevices with the V4L2 core. The
+first (traditional) possibility is to have subdevices registered by bridge
+drivers. This can be done when the bridge driver has the complete information
+about subdevices connected to it and knows exactly when to register them. This
+is typically the case for internal subdevices, like video data processing units
+within SoCs or complex PCI(e) boards, camera sensors in USB cameras or connected
+to SoCs, which pass information about them to bridge drivers, usually in their
+platform data.
+
+There are however also situations where subdevices have to be registered
+asynchronously to bridge devices. An example of such a configuration is a Device
+Tree based system where information about subdevices is made available to the
+system independently from the bridge devices, e.g. when subdevices are defined
+in DT as I2C device nodes. The API used in this second case is described further
+below.
+
+Using one or the other registration method only affects the probing process, the
+run-time bridge-subdevice interaction is in both cases the same.
+
+In the synchronous case a device (bridge) driver needs to register the
+:c:type:`v4l2_subdev` with the v4l2_device:
+
+ :c:func:`v4l2_device_register_subdev <v4l2_device_register_subdev>`
+ (:c:type:`v4l2_dev <v4l2_device>`, :c:type:`sd <v4l2_subdev>`).
+
+This can fail if the subdev module disappeared before it could be registered.
+After this function was called successfully the subdev->dev field points to
+the :c:type:`v4l2_device`.
+
+If the v4l2_device parent device has a non-NULL mdev field, the sub-device
+entity will be automatically registered with the media device.
+
+You can unregister a sub-device using:
+
+ :c:func:`v4l2_device_unregister_subdev <v4l2_device_unregister_subdev>`
+ (:c:type:`sd <v4l2_subdev>`).
+
+
+Afterwards the subdev module can be unloaded and
+:c:type:`sd <v4l2_subdev>`->dev == ``NULL``.
+
+You can call an ops function either directly:
+
+.. code-block:: c
+
+ err = sd->ops->core->g_std(sd, &norm);
+
+but it is better and easier to use this macro:
+
+.. code-block:: c
+
+ err = v4l2_subdev_call(sd, core, g_std, &norm);
+
+The macro will to the right ``NULL`` pointer checks and returns ``-ENODEV``
+if :c:type:`sd <v4l2_subdev>` is ``NULL``, ``-ENOIOCTLCMD`` if either
+:c:type:`sd <v4l2_subdev>`->core or :c:type:`sd <v4l2_subdev>`->core->g_std is ``NULL``, or the actual result of the
+:c:type:`sd <v4l2_subdev>`->ops->core->g_std ops.
+
+It is also possible to call all or a subset of the sub-devices:
+
+.. code-block:: c
+
+ v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm);
+
+Any subdev that does not support this ops is skipped and error results are
+ignored. If you want to check for errors use this:
+
+.. code-block:: c
+
+ err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm);
+
+Any error except ``-ENOIOCTLCMD`` will exit the loop with that error. If no
+errors (except ``-ENOIOCTLCMD``) occurred, then 0 is returned.
+
+The second argument to both calls is a group ID. If 0, then all subdevs are
+called. If non-zero, then only those whose group ID match that value will
+be called. Before a bridge driver registers a subdev it can set
+:c:type:`sd <v4l2_subdev>`->grp_id to whatever value it wants (it's 0 by
+default). This value is owned by the bridge driver and the sub-device driver
+will never modify or use it.
+
+The group ID gives the bridge driver more control how callbacks are called.
+For example, there may be multiple audio chips on a board, each capable of
+changing the volume. But usually only one will actually be used when the
+user want to change the volume. You can set the group ID for that subdev to
+e.g. AUDIO_CONTROLLER and specify that as the group ID value when calling
+``v4l2_device_call_all()``. That ensures that it will only go to the subdev
+that needs it.
+
+If the sub-device needs to notify its v4l2_device parent of an event, then
+it can call ``v4l2_subdev_notify(sd, notification, arg)``. This macro checks
+whether there is a ``notify()`` callback defined and returns ``-ENODEV`` if not.
+Otherwise the result of the ``notify()`` call is returned.
+
+The advantage of using :c:type:`v4l2_subdev` is that it is a generic struct and
+does not contain any knowledge about the underlying hardware. So a driver might
+contain several subdevs that use an I2C bus, but also a subdev that is
+controlled through GPIO pins. This distinction is only relevant when setting
+up the device, but once the subdev is registered it is completely transparent.
+
+In the asynchronous case subdevice probing can be invoked independently of the
+bridge driver availability. The subdevice driver then has to verify whether all
+the requirements for a successful probing are satisfied. This can include a
+check for a master clock availability. If any of the conditions aren't satisfied
+the driver might decide to return ``-EPROBE_DEFER`` to request further reprobing
+attempts. Once all conditions are met the subdevice shall be registered using
+the :c:func:`v4l2_async_register_subdev` function. Unregistration is
+performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices
+registered this way are stored in a global list of subdevices, ready to be
+picked up by bridge drivers.
+
+Bridge drivers in turn have to register a notifier object with an array of
+subdevice descriptors that the bridge device needs for its operation. This is
+performed using the :c:func:`v4l2_async_notifier_register` call. To
+unregister the notifier the driver has to call
+:c:func:`v4l2_async_notifier_unregister`. The former of the two functions
+takes two arguments: a pointer to struct :c:type:`v4l2_device` and a pointer to
+struct :c:type:`v4l2_async_notifier`. The latter contains a pointer to an array
+of pointers to subdevice descriptors of type struct :c:type:`v4l2_async_subdev`
+type. The V4L2 core will then use these descriptors to match asynchronously
+registered
+subdevices to them. If a match is detected the ``.bound()`` notifier callback
+is called. After all subdevices have been located the .complete() callback is
+called. When a subdevice is removed from the system the .unbind() method is
+called. All three callbacks are optional.
+
+V4L2 sub-device userspace API
+-----------------------------
+
+Beside exposing a kernel API through the :c:type:`v4l2_subdev_ops` structure,
+V4L2 sub-devices can also be controlled directly by userspace applications.
+
+Device nodes named ``v4l-subdev``\ *X* can be created in ``/dev`` to access
+sub-devices directly. If a sub-device supports direct userspace configuration
+it must set the ``V4L2_SUBDEV_FL_HAS_DEVNODE`` flag before being registered.
+
+After registering sub-devices, the :c:type:`v4l2_device` driver can create
+device nodes for all registered sub-devices marked with
+``V4L2_SUBDEV_FL_HAS_DEVNODE`` by calling
+:c:func:`v4l2_device_register_subdev_nodes`. Those device nodes will be
+automatically removed when sub-devices are unregistered.
+
+The device node handles a subset of the V4L2 API.
+
+``VIDIOC_QUERYCTRL``,
+``VIDIOC_QUERYMENU``,
+``VIDIOC_G_CTRL``,
+``VIDIOC_S_CTRL``,
+``VIDIOC_G_EXT_CTRLS``,
+``VIDIOC_S_EXT_CTRLS`` and
+``VIDIOC_TRY_EXT_CTRLS``:
+
+ The controls ioctls are identical to the ones defined in V4L2. They
+ behave identically, with the only exception that they deal only with
+ controls implemented in the sub-device. Depending on the driver, those
+ controls can be also be accessed through one (or several) V4L2 device
+ nodes.
+
+``VIDIOC_DQEVENT``,
+``VIDIOC_SUBSCRIBE_EVENT`` and
+``VIDIOC_UNSUBSCRIBE_EVENT``
+
+ The events ioctls are identical to the ones defined in V4L2. They
+ behave identically, with the only exception that they deal only with
+ events generated by the sub-device. Depending on the driver, those
+ events can also be reported by one (or several) V4L2 device nodes.
+
+ Sub-device drivers that want to use events need to set the
+ ``V4L2_SUBDEV_USES_EVENTS`` :c:type:`v4l2_subdev`.flags and initialize
+ :c:type:`v4l2_subdev`.nevents to events queue depth before registering
+ the sub-device. After registration events can be queued as usual on the
+ :c:type:`v4l2_subdev`.devnode device node.
+
+ To properly support events, the ``poll()`` file operation is also
+ implemented.
+
+Private ioctls
+
+ All ioctls not in the above list are passed directly to the sub-device
+ driver through the core::ioctl operation.
+
+
+I2C sub-device drivers
+----------------------
+
+Since these drivers are so common, special helper functions are available to
+ease the use of these drivers (``v4l2-common.h``).
+
+The recommended method of adding :c:type:`v4l2_subdev` support to an I2C driver
+is to embed the :c:type:`v4l2_subdev` struct into the state struct that is
+created for each I2C device instance. Very simple devices have no state
+struct and in that case you can just create a :c:type:`v4l2_subdev` directly.
+
+A typical state struct would look like this (where 'chipname' is replaced by
+the name of the chip):
+
+.. code-block:: c
+
+ struct chipname_state {
+ struct v4l2_subdev sd;
+ ... /* additional state fields */
+ };
+
+Initialize the :c:type:`v4l2_subdev` struct as follows:
+
+.. code-block:: c
+
+ v4l2_i2c_subdev_init(&state->sd, client, subdev_ops);
+
+This function will fill in all the fields of :c:type:`v4l2_subdev` ensure that
+the :c:type:`v4l2_subdev` and i2c_client both point to one another.
+
+You should also add a helper inline function to go from a :c:type:`v4l2_subdev`
+pointer to a chipname_state struct:
+
+.. code-block:: c
+
+ static inline struct chipname_state *to_state(struct v4l2_subdev *sd)
+ {
+ return container_of(sd, struct chipname_state, sd);
+ }
+
+Use this to go from the :c:type:`v4l2_subdev` struct to the ``i2c_client``
+struct:
+
+.. code-block:: c
+
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+And this to go from an ``i2c_client`` to a :c:type:`v4l2_subdev` struct:
+
+.. code-block:: c
+
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+Make sure to call
+:c:func:`v4l2_device_unregister_subdev`\ (:c:type:`sd <v4l2_subdev>`)
+when the ``remove()`` callback is called. This will unregister the sub-device
+from the bridge driver. It is safe to call this even if the sub-device was
+never registered.
+
+You need to do this because when the bridge driver destroys the i2c adapter
+the ``remove()`` callbacks are called of the i2c devices on that adapter.
+After that the corresponding v4l2_subdev structures are invalid, so they
+have to be unregistered first. Calling
+:c:func:`v4l2_device_unregister_subdev`\ (:c:type:`sd <v4l2_subdev>`)
+from the ``remove()`` callback ensures that this is always done correctly.
+
+
+The bridge driver also has some helper functions it can use:
+
+.. code-block:: c
+
+ struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter,
+ "module_foo", "chipid", 0x36, NULL);
+
+This loads the given module (can be ``NULL`` if no module needs to be loaded)
+and calls :c:func:`i2c_new_device` with the given ``i2c_adapter`` and
+chip/address arguments. If all goes well, then it registers the subdev with
+the v4l2_device.
+
+You can also use the last argument of :c:func:`v4l2_i2c_new_subdev` to pass
+an array of possible I2C addresses that it should probe. These probe addresses
+are only used if the previous argument is 0. A non-zero argument means that you
+know the exact i2c address so in that case no probing will take place.
+
+Both functions return ``NULL`` if something went wrong.
+
+Note that the chipid you pass to :c:func:`v4l2_i2c_new_subdev` is usually
+the same as the module name. It allows you to specify a chip variant, e.g.
+"saa7114" or "saa7115". In general though the i2c driver autodetects this.
+The use of chipid is something that needs to be looked at more closely at a
+later date. It differs between i2c drivers and as such can be confusing.
+To see which chip variants are supported you can look in the i2c driver code
+for the i2c_device_id table. This lists all the possibilities.
+
+There are two more helper functions:
+
+:c:func:`v4l2_i2c_new_subdev_cfg`: this function adds new irq and
+platform_data arguments and has both 'addr' and 'probed_addrs' arguments:
+if addr is not 0 then that will be used (non-probing variant), otherwise the
+probed_addrs are probed.
+
+For example: this will probe for address 0x10:
+
+.. code-block:: c
+
+ struct v4l2_subdev *sd = v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter,
+ "module_foo", "chipid", 0, NULL, 0, I2C_ADDRS(0x10));
+
+:c:func:`v4l2_i2c_new_subdev_board` uses an :c:type:`i2c_board_info` struct
+which is passed to the i2c driver and replaces the irq, platform_data and addr
+arguments.
+
+If the subdev supports the s_config core ops, then that op is called with
+the irq and platform_data arguments after the subdev was setup.
+
+The older :c:func:`v4l2_i2c_new_subdev` and
+:c:func:`v4l2_i2c_new_probed_subdev` functions will call ``s_config`` as
+well, but with irq set to 0 and platform_data set to ``NULL``.
+
+V4L2 sub-device functions and data structures
+---------------------------------------------
+
+.. kernel-doc:: include/media/v4l2-subdev.h
+
+.. kernel-doc:: include/media/v4l2-async.h