1 files changed, 91 insertions, 0 deletions
diff --git a/Documentation/media/uapi/dvb/fe-set-tone.rst b/Documentation/media/uapi/dvb/fe-set-tone.rst
new file mode 100644
index 000000000..545e2afba
--- /dev/null
+++ b/Documentation/media/uapi/dvb/fe-set-tone.rst
@@ -0,0 +1,91 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _FE_SET_TONE:
+
+*****************
+ioctl FE_SET_TONE
+*****************
+
+Name
+====
+
+FE_SET_TONE - Sets/resets the generation of the continuous 22kHz tone.
+
+
+Synopsis
+========
+
+.. cpp:function:: int ioctl( int fd, int request, enum fe_sec_tone_mode *tone )
+
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :ref:`open() <frontend_f_open>`.
+
+``request``
+    FE_SET_TONE
+
+``tone``
+    pointer to enum :ref:`fe_sec_tone_mode <fe-sec-tone-mode>`
+
+
+Description
+===========
+
+This ioctl is used to set the generation of the continuous 22kHz tone.
+This call requires read/write permissions.
+
+Usually, satellite antenna subsystems require that the digital TV device
+to send a 22kHz tone in order to select between high/low band on some
+dual-band LNBf. It is also used to send signals to DiSEqC equipment, but
+this is done using the DiSEqC ioctls.
+
+.. attention:: If more than one device is connected to the same antenna,
+   setting a tone may interfere on other devices, as they may lose the
+   capability of selecting the band. So, it is recommended that applications
+   would change to SEC_TONE_OFF when the device is not used.
+
+.. _fe-sec-tone-mode-t:
+
+enum fe_sec_tone_mode
+=====================
+
+.. _fe-sec-tone-mode:
+
+.. flat-table:: enum fe_sec_tone_mode
+    :header-rows:  1
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ID
+
+       -  Description
+
+    -  .. row 2
+
+       -  .. _SEC-TONE-ON:
+
+	  ``SEC_TONE_ON``
+
+       -  Sends a 22kHz tone burst to the antenna
+
+    -  .. row 3
+
+       -  .. _SEC-TONE-OFF:
+
+	  ``SEC_TONE_OFF``
+
+       -  Don't send a 22kHz tone to the antenna (except if the
+	  FE_DISEQC_* ioctls are called)
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.