summaryrefslogtreecommitdiff
path: root/Documentation/s390/qeth.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/s390/qeth.txt')
-rw-r--r--Documentation/s390/qeth.txt50
1 files changed, 50 insertions, 0 deletions
diff --git a/Documentation/s390/qeth.txt b/Documentation/s390/qeth.txt
new file mode 100644
index 000000000..74122ada9
--- /dev/null
+++ b/Documentation/s390/qeth.txt
@@ -0,0 +1,50 @@
+IBM s390 QDIO Ethernet Driver
+
+HiperSockets Bridge Port Support
+
+Uevents
+
+To generate the events the device must be assigned a role of either
+a primary or a secondary Bridge Port. For more information, see
+"z/VM Connectivity, SC24-6174".
+
+When run on HiperSockets Bridge Capable Port hardware, and the state
+of some configured Bridge Port device on the channel changes, a udev
+event with ACTION=CHANGE is emitted on behalf of the corresponding
+ccwgroup device. The event has the following attributes:
+
+BRIDGEPORT=statechange - indicates that the Bridge Port device changed
+ its state.
+
+ROLE={primary|secondary|none} - the role assigned to the port.
+
+STATE={active|standby|inactive} - the newly assumed state of the port.
+
+When run on HiperSockets Bridge Capable Port hardware with host address
+notifications enabled, a udev event with ACTION=CHANGE is emitted.
+It is emitted on behalf of the corresponding ccwgroup device when a host
+or a VLAN is registered or unregistered on the network served by the device.
+The event has the following attributes:
+
+BRIDGEDHOST={reset|register|deregister|abort} - host address
+ notifications are started afresh, a new host or VLAN is registered or
+ deregistered on the Bridge Port HiperSockets channel, or address
+ notifications are aborted.
+
+VLAN=numeric-vlan-id - VLAN ID on which the event occurred. Not included
+ if no VLAN is involved in the event.
+
+MAC=xx:xx:xx:xx:xx:xx - MAC address of the host that is being registered
+ or deregistered from the HiperSockets channel. Not reported if the
+ event reports the creation or destruction of a VLAN.
+
+NTOK_BUSID=x.y.zzzz - device bus ID (CSSID, SSID and device number).
+
+NTOK_IID=xx - device IID.
+
+NTOK_CHPID=xx - device CHPID.
+
+NTOK_CHID=xxxx - device channel ID.
+
+Note that the NTOK_* attributes refer to devices other than the one
+connected to the system on which the OS is running.