summaryrefslogtreecommitdiff
path: root/arch/alpha/kernel/time.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/alpha/kernel/time.c')
-rw-r--r--arch/alpha/kernel/time.c465
1 files changed, 465 insertions, 0 deletions
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
new file mode 100644
index 000000000..643a9dcdf
--- /dev/null
+++ b/arch/alpha/kernel/time.c
@@ -0,0 +1,465 @@
+/*
+ * linux/arch/alpha/kernel/time.c
+ *
+ * Copyright (C) 1991, 1992, 1995, 1999, 2000 Linus Torvalds
+ *
+ * This file contains the clocksource time handling.
+ * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
+ * "A Kernel Model for Precision Timekeeping" by Dave Mills
+ * 1997-01-09 Adrian Sun
+ * use interval timer if CONFIG_RTC=y
+ * 1997-10-29 John Bowman (bowman@math.ualberta.ca)
+ * fixed tick loss calculation in timer_interrupt
+ * (round system clock to nearest tick instead of truncating)
+ * fixed algorithm in time_init for getting time from CMOS clock
+ * 1999-04-16 Thorsten Kranzkowski (dl8bcu@gmx.net)
+ * fixed algorithm in do_gettimeofday() for calculating the precise time
+ * from processor cycle counter (now taking lost_ticks into account)
+ * 2003-06-03 R. Scott Bailey <scott.bailey@eds.com>
+ * Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
+ */
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+#include <linux/profile.h>
+#include <linux/irq_work.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/hwrpb.h>
+
+#include <linux/mc146818rtc.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+unsigned long est_cycle_freq;
+
+#ifdef CONFIG_IRQ_WORK
+
+DEFINE_PER_CPU(u8, irq_work_pending);
+
+#define set_irq_work_pending_flag() __this_cpu_write(irq_work_pending, 1)
+#define test_irq_work_pending() __this_cpu_read(irq_work_pending)
+#define clear_irq_work_pending() __this_cpu_write(irq_work_pending, 0)
+
+void arch_irq_work_raise(void)
+{
+ set_irq_work_pending_flag();
+}
+
+#else /* CONFIG_IRQ_WORK */
+
+#define test_irq_work_pending() 0
+#define clear_irq_work_pending()
+
+#endif /* CONFIG_IRQ_WORK */
+
+
+static inline __u32 rpcc(void)
+{
+ return __builtin_alpha_rpcc();
+}
+
+
+
+/*
+ * The RTC as a clock_event_device primitive.
+ */
+
+static DEFINE_PER_CPU(struct clock_event_device, cpu_ce);
+
+irqreturn_t
+rtc_timer_interrupt(int irq, void *dev)
+{
+ int cpu = smp_processor_id();
+ struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+ /* Don't run the hook for UNUSED or SHUTDOWN. */
+ if (likely(ce->mode == CLOCK_EVT_MODE_PERIODIC))
+ ce->event_handler(ce);
+
+ if (test_irq_work_pending()) {
+ clear_irq_work_pending();
+ irq_work_run();
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void
+rtc_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce)
+{
+ /* The mode member of CE is updated in generic code.
+ Since we only support periodic events, nothing to do. */
+}
+
+static int
+rtc_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
+{
+ /* This hook is for oneshot mode, which we don't support. */
+ return -EINVAL;
+}
+
+static void __init
+init_rtc_clockevent(void)
+{
+ int cpu = smp_processor_id();
+ struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+ *ce = (struct clock_event_device){
+ .name = "rtc",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 100,
+ .cpumask = cpumask_of(cpu),
+ .set_mode = rtc_ce_set_mode,
+ .set_next_event = rtc_ce_set_next_event,
+ };
+
+ clockevents_config_and_register(ce, CONFIG_HZ, 0, 0);
+}
+
+
+/*
+ * The QEMU clock as a clocksource primitive.
+ */
+
+static cycle_t
+qemu_cs_read(struct clocksource *cs)
+{
+ return qemu_get_vmtime();
+}
+
+static struct clocksource qemu_cs = {
+ .name = "qemu",
+ .rating = 400,
+ .read = qemu_cs_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .max_idle_ns = LONG_MAX
+};
+
+
+/*
+ * The QEMU alarm as a clock_event_device primitive.
+ */
+
+static void
+qemu_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce)
+{
+ /* The mode member of CE is updated for us in generic code.
+ Just make sure that the event is disabled. */
+ qemu_set_alarm_abs(0);
+}
+
+static int
+qemu_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
+{
+ qemu_set_alarm_rel(evt);
+ return 0;
+}
+
+static irqreturn_t
+qemu_timer_interrupt(int irq, void *dev)
+{
+ int cpu = smp_processor_id();
+ struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+ ce->event_handler(ce);
+ return IRQ_HANDLED;
+}
+
+static void __init
+init_qemu_clockevent(void)
+{
+ int cpu = smp_processor_id();
+ struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+ *ce = (struct clock_event_device){
+ .name = "qemu",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 400,
+ .cpumask = cpumask_of(cpu),
+ .set_mode = qemu_ce_set_mode,
+ .set_next_event = qemu_ce_set_next_event,
+ };
+
+ clockevents_config_and_register(ce, NSEC_PER_SEC, 1000, LONG_MAX);
+}
+
+
+void __init
+common_init_rtc(void)
+{
+ unsigned char x, sel = 0;
+
+ /* Reset periodic interrupt frequency. */
+#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
+ x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
+ /* Test includes known working values on various platforms
+ where 0x26 is wrong; we refuse to change those. */
+ if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
+ sel = RTC_REF_CLCK_32KHZ + 6;
+ }
+#elif CONFIG_HZ == 256 || CONFIG_HZ == 128 || CONFIG_HZ == 64 || CONFIG_HZ == 32
+ sel = RTC_REF_CLCK_32KHZ + __builtin_ffs(32768 / CONFIG_HZ);
+#else
+# error "Unknown HZ from arch/alpha/Kconfig"
+#endif
+ if (sel) {
+ printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n",
+ CONFIG_HZ, sel);
+ CMOS_WRITE(sel, RTC_FREQ_SELECT);
+ }
+
+ /* Turn on periodic interrupts. */
+ x = CMOS_READ(RTC_CONTROL);
+ if (!(x & RTC_PIE)) {
+ printk("Turning on RTC interrupts.\n");
+ x |= RTC_PIE;
+ x &= ~(RTC_AIE | RTC_UIE);
+ CMOS_WRITE(x, RTC_CONTROL);
+ }
+ (void) CMOS_READ(RTC_INTR_FLAGS);
+
+ outb(0x36, 0x43); /* pit counter 0: system timer */
+ outb(0x00, 0x40);
+ outb(0x00, 0x40);
+
+ outb(0xb6, 0x43); /* pit counter 2: speaker */
+ outb(0x31, 0x42);
+ outb(0x13, 0x42);
+
+ init_rtc_irq();
+}
+
+
+#ifndef CONFIG_ALPHA_WTINT
+/*
+ * The RPCC as a clocksource primitive.
+ *
+ * While we have free-running timecounters running on all CPUs, and we make
+ * a half-hearted attempt in init_rtc_rpcc_info to sync the timecounter
+ * with the wall clock, that initialization isn't kept up-to-date across
+ * different time counters in SMP mode. Therefore we can only use this
+ * method when there's only one CPU enabled.
+ *
+ * When using the WTINT PALcall, the RPCC may shift to a lower frequency,
+ * or stop altogether, while waiting for the interrupt. Therefore we cannot
+ * use this method when WTINT is in use.
+ */
+
+static cycle_t read_rpcc(struct clocksource *cs)
+{
+ return rpcc();
+}
+
+static struct clocksource clocksource_rpcc = {
+ .name = "rpcc",
+ .rating = 300,
+ .read = read_rpcc,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS
+};
+#endif /* ALPHA_WTINT */
+
+
+/* Validate a computed cycle counter result against the known bounds for
+ the given processor core. There's too much brokenness in the way of
+ timing hardware for any one method to work everywhere. :-(
+
+ Return 0 if the result cannot be trusted, otherwise return the argument. */
+
+static unsigned long __init
+validate_cc_value(unsigned long cc)
+{
+ static struct bounds {
+ unsigned int min, max;
+ } cpu_hz[] __initdata = {
+ [EV3_CPU] = { 50000000, 200000000 }, /* guess */
+ [EV4_CPU] = { 100000000, 300000000 },
+ [LCA4_CPU] = { 100000000, 300000000 }, /* guess */
+ [EV45_CPU] = { 200000000, 300000000 },
+ [EV5_CPU] = { 250000000, 433000000 },
+ [EV56_CPU] = { 333000000, 667000000 },
+ [PCA56_CPU] = { 400000000, 600000000 }, /* guess */
+ [PCA57_CPU] = { 500000000, 600000000 }, /* guess */
+ [EV6_CPU] = { 466000000, 600000000 },
+ [EV67_CPU] = { 600000000, 750000000 },
+ [EV68AL_CPU] = { 750000000, 940000000 },
+ [EV68CB_CPU] = { 1000000000, 1333333333 },
+ /* None of the following are shipping as of 2001-11-01. */
+ [EV68CX_CPU] = { 1000000000, 1700000000 }, /* guess */
+ [EV69_CPU] = { 1000000000, 1700000000 }, /* guess */
+ [EV7_CPU] = { 800000000, 1400000000 }, /* guess */
+ [EV79_CPU] = { 1000000000, 2000000000 }, /* guess */
+ };
+
+ /* Allow for some drift in the crystal. 10MHz is more than enough. */
+ const unsigned int deviation = 10000000;
+
+ struct percpu_struct *cpu;
+ unsigned int index;
+
+ cpu = (struct percpu_struct *)((char*)hwrpb + hwrpb->processor_offset);
+ index = cpu->type & 0xffffffff;
+
+ /* If index out of bounds, no way to validate. */
+ if (index >= ARRAY_SIZE(cpu_hz))
+ return cc;
+
+ /* If index contains no data, no way to validate. */
+ if (cpu_hz[index].max == 0)
+ return cc;
+
+ if (cc < cpu_hz[index].min - deviation
+ || cc > cpu_hz[index].max + deviation)
+ return 0;
+
+ return cc;
+}
+
+
+/*
+ * Calibrate CPU clock using legacy 8254 timer/counter. Stolen from
+ * arch/i386/time.c.
+ */
+
+#define CALIBRATE_LATCH 0xffff
+#define TIMEOUT_COUNT 0x100000
+
+static unsigned long __init
+calibrate_cc_with_pit(void)
+{
+ int cc, count = 0;
+
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Now let's take care of CTC channel 2
+ *
+ * Set the Gate high, program CTC channel 2 for mode 0,
+ * (interrupt on terminal count mode), binary count,
+ * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+ */
+ outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
+ outb(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */
+ outb(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */
+
+ cc = rpcc();
+ do {
+ count++;
+ } while ((inb(0x61) & 0x20) == 0 && count < TIMEOUT_COUNT);
+ cc = rpcc() - cc;
+
+ /* Error: ECTCNEVERSET or ECPUTOOFAST. */
+ if (count <= 1 || count == TIMEOUT_COUNT)
+ return 0;
+
+ return ((long)cc * PIT_TICK_RATE) / (CALIBRATE_LATCH + 1);
+}
+
+/* The Linux interpretation of the CMOS clock register contents:
+ When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+ RTC registers show the second which has precisely just started.
+ Let's hope other operating systems interpret the RTC the same way. */
+
+static unsigned long __init
+rpcc_after_update_in_progress(void)
+{
+ do { } while (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP));
+ do { } while (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+
+ return rpcc();
+}
+
+void __init
+time_init(void)
+{
+ unsigned int cc1, cc2;
+ unsigned long cycle_freq, tolerance;
+ long diff;
+
+ if (alpha_using_qemu) {
+ clocksource_register_hz(&qemu_cs, NSEC_PER_SEC);
+ init_qemu_clockevent();
+
+ timer_irqaction.handler = qemu_timer_interrupt;
+ init_rtc_irq();
+ return;
+ }
+
+ /* Calibrate CPU clock -- attempt #1. */
+ if (!est_cycle_freq)
+ est_cycle_freq = validate_cc_value(calibrate_cc_with_pit());
+
+ cc1 = rpcc();
+
+ /* Calibrate CPU clock -- attempt #2. */
+ if (!est_cycle_freq) {
+ cc1 = rpcc_after_update_in_progress();
+ cc2 = rpcc_after_update_in_progress();
+ est_cycle_freq = validate_cc_value(cc2 - cc1);
+ cc1 = cc2;
+ }
+
+ cycle_freq = hwrpb->cycle_freq;
+ if (est_cycle_freq) {
+ /* If the given value is within 250 PPM of what we calculated,
+ accept it. Otherwise, use what we found. */
+ tolerance = cycle_freq / 4000;
+ diff = cycle_freq - est_cycle_freq;
+ if (diff < 0)
+ diff = -diff;
+ if ((unsigned long)diff > tolerance) {
+ cycle_freq = est_cycle_freq;
+ printk("HWRPB cycle frequency bogus. "
+ "Estimated %lu Hz\n", cycle_freq);
+ } else {
+ est_cycle_freq = 0;
+ }
+ } else if (! validate_cc_value (cycle_freq)) {
+ printk("HWRPB cycle frequency bogus, "
+ "and unable to estimate a proper value!\n");
+ }
+
+ /* See above for restrictions on using clocksource_rpcc. */
+#ifndef CONFIG_ALPHA_WTINT
+ if (hwrpb->nr_processors == 1)
+ clocksource_register_hz(&clocksource_rpcc, cycle_freq);
+#endif
+
+ /* Startup the timer source. */
+ alpha_mv.init_rtc();
+ init_rtc_clockevent();
+}
+
+/* Initialize the clock_event_device for secondary cpus. */
+#ifdef CONFIG_SMP
+void __init
+init_clockevent(void)
+{
+ if (alpha_using_qemu)
+ init_qemu_clockevent();
+ else
+ init_rtc_clockevent();
+}
+#endif