diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 2121 |
1 files changed, 2121 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig new file mode 100644 index 000000000..45df48ba0 --- /dev/null +++ b/arch/arm/Kconfig @@ -0,0 +1,2121 @@ +config ARM + bool + default y + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select ARCH_HAS_ELF_RANDOMIZE + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST + select ARCH_HAVE_CUSTOM_GPIO_H + select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_SUPPORTS_ATOMIC_RMW + select ARCH_USE_BUILTIN_BSWAP + select ARCH_USE_CMPXCHG_LOCKREF + select ARCH_WANT_IPC_PARSE_VERSION + select BUILDTIME_EXTABLE_SORT if MMU + select CLONE_BACKWARDS + select CPU_PM if (SUSPEND || CPU_IDLE) + select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS + select GENERIC_ALLOCATOR + select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_IDLE_POLL_SETUP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_IRQ_SHOW_LEVEL + select GENERIC_PCI_IOMAP + select GENERIC_SCHED_CLOCK + select GENERIC_SMP_IDLE_THREAD + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select HANDLE_DOMAIN_IRQ + select HARDIRQS_SW_RESEND + select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) + select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL + select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) + select HAVE_ARCH_TRACEHOOK + select HAVE_BPF_JIT + select HAVE_CC_STACKPROTECTOR + select HAVE_CONTEXT_TRACKING + select HAVE_C_RECORDMCOUNT + select HAVE_DEBUG_KMEMLEAK + select HAVE_DMA_API_DEBUG + select HAVE_DMA_ATTRS + select HAVE_DMA_CONTIGUOUS if MMU + select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) + select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU + select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) + select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) + select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) + select HAVE_GENERIC_DMA_COHERENT + select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) + select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_IRQ_TIME_ACCOUNTING + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_LZ4 + select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO + select HAVE_KERNEL_XZ + select HAVE_KPROBES if !XIP_KERNEL + select HAVE_KRETPROBES if (HAVE_KPROBES) + select HAVE_MEMBLOCK + select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND + select HAVE_OPROFILE if (HAVE_PERF_EVENTS) + select HAVE_OPTPROBES if !THUMB2_KERNEL + select HAVE_PERF_EVENTS + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP + select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE) + select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_SYSCALL_TRACEPOINTS + select HAVE_UID16 + select HAVE_VIRT_CPU_ACCOUNTING_GEN + select IRQ_FORCED_THREADING + select MODULES_USE_ELF_REL + select NO_BOOTMEM + select OLD_SIGACTION + select OLD_SIGSUSPEND3 + select PERF_USE_VMALLOC + select RTC_LIB + select SYS_SUPPORTS_APM_EMULATION + # Above selects are sorted alphabetically; please add new ones + # according to that. Thanks. + help + The ARM series is a line of low-power-consumption RISC chip designs + licensed by ARM Ltd and targeted at embedded applications and + handhelds such as the Compaq IPAQ. ARM-based PCs are no longer + manufactured, but legacy ARM-based PC hardware remains popular in + Europe. There is an ARM Linux project with a web page at + <http://www.arm.linux.org.uk/>. + +config ARM_HAS_SG_CHAIN + select ARCH_HAS_SG_CHAIN + bool + +config NEED_SG_DMA_LENGTH + bool + +config ARM_DMA_USE_IOMMU + bool + select ARM_HAS_SG_CHAIN + select NEED_SG_DMA_LENGTH + +if ARM_DMA_USE_IOMMU + +config ARM_DMA_IOMMU_ALIGNMENT + int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" + range 4 9 + default 8 + help + DMA mapping framework by default aligns all buffers to the smallest + PAGE_SIZE order which is greater than or equal to the requested buffer + size. This works well for buffers up to a few hundreds kilobytes, but + for larger buffers it just a waste of address space. Drivers which has + relatively small addressing window (like 64Mib) might run out of + virtual space with just a few allocations. + + With this parameter you can specify the maximum PAGE_SIZE order for + DMA IOMMU buffers. Larger buffers will be aligned only to this + specified order. The order is expressed as a power of two multiplied + by the PAGE_SIZE. + +endif + +config MIGHT_HAVE_PCI + bool + +config SYS_SUPPORTS_APM_EMULATION + bool + +config HAVE_TCM + bool + select GENERIC_ALLOCATOR + +config HAVE_PROC_CPU + bool + +config NO_IOPORT_MAP + bool + +config EISA + bool + ---help--- + The Extended Industry Standard Architecture (EISA) bus was + developed as an open alternative to the IBM MicroChannel bus. + + The EISA bus provided some of the features of the IBM MicroChannel + bus while maintaining backward compatibility with cards made for + the older ISA bus. The EISA bus saw limited use between 1988 and + 1995 when it was made obsolete by the PCI bus. + + Say Y here if you are building a kernel for an EISA-based machine. + + Otherwise, say N. + +config SBUS + bool + +config STACKTRACE_SUPPORT + bool + default y + +config HAVE_LATENCYTOP_SUPPORT + bool + depends on !SMP + default y + +config LOCKDEP_SUPPORT + bool + default y + +config TRACE_IRQFLAGS_SUPPORT + bool + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + default y + +config ARCH_HAS_ILOG2_U32 + bool + +config ARCH_HAS_ILOG2_U64 + bool + +config ARCH_HAS_BANDGAP + bool + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config ARCH_MAY_HAVE_PC_FDC + bool + +config ZONE_DMA + bool + +config NEED_DMA_MAP_STATE + def_bool y + +config ARCH_SUPPORTS_UPROBES + def_bool y + +config ARCH_HAS_DMA_SET_COHERENT_MASK + bool + +config GENERIC_ISA_DMA + bool + +config FIQ + bool + +config NEED_RET_TO_USER + bool + +config ARCH_MTD_XIP + bool + +config VECTORS_BASE + hex + default 0xffff0000 if MMU || CPU_HIGH_VECTOR + default DRAM_BASE if REMAP_VECTORS_TO_RAM + default 0x00000000 + help + The base address of exception vectors. This must be two pages + in size. + +config ARM_PATCH_PHYS_VIRT + bool "Patch physical to virtual translations at runtime" if EMBEDDED + default y + depends on !XIP_KERNEL && MMU + depends on !ARCH_REALVIEW || !SPARSEMEM + help + Patch phys-to-virt and virt-to-phys translation functions at + boot and module load time according to the position of the + kernel in system memory. + + This can only be used with non-XIP MMU kernels where the base + of physical memory is at a 16MB boundary. + + Only disable this option if you know that you do not require + this feature (eg, building a kernel for a single machine) and + you need to shrink the kernel to the minimal size. + +config NEED_MACH_IO_H + bool + help + Select this when mach/io.h is required to provide special + definitions for this platform. The need for mach/io.h should + be avoided when possible. + +config NEED_MACH_MEMORY_H + bool + help + Select this when mach/memory.h is required to provide special + definitions for this platform. The need for mach/memory.h should + be avoided when possible. + +config PHYS_OFFSET + hex "Physical address of main memory" if MMU + depends on !ARM_PATCH_PHYS_VIRT + default DRAM_BASE if !MMU + default 0x00000000 if ARCH_EBSA110 || \ + EP93XX_SDCE3_SYNC_PHYS_OFFSET || \ + ARCH_FOOTBRIDGE || \ + ARCH_INTEGRATOR || \ + ARCH_IOP13XX || \ + ARCH_KS8695 || \ + (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) + default 0x10000000 if ARCH_OMAP1 || ARCH_RPC + default 0x20000000 if ARCH_S5PV210 + default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET + default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100 + default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET + default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET + default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET + help + Please provide the physical address corresponding to the + location of main memory in your system. + +config GENERIC_BUG + def_bool y + depends on BUG + +config PGTABLE_LEVELS + int + default 3 if ARM_LPAE + default 2 + +source "init/Kconfig" + +source "kernel/Kconfig.freezer" + +menu "System Type" + +config MMU + bool "MMU-based Paged Memory Management Support" + default y + help + Select if you want MMU-based virtualised addressing space + support by paged memory management. If unsure, say 'Y'. + +# +# The "ARM system type" choice list is ordered alphabetically by option +# text. Please add new entries in the option alphabetic order. +# +choice + prompt "ARM system type" + default ARCH_VERSATILE if !MMU + default ARCH_MULTIPLATFORM if MMU + +config ARCH_MULTIPLATFORM + bool "Allow multiple platforms to be selected" + depends on MMU + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_HAS_SG_CHAIN + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR + select CLKSRC_OF + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select USE_OF + +config ARCH_REALVIEW + bool "ARM Ltd. RealView family" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select COMMON_CLK + select COMMON_CLK_VERSATILE + select GENERIC_CLOCKEVENTS + select GPIO_PL061 if GPIOLIB + select ICST + select NEED_MACH_MEMORY_H + select PLAT_VERSATILE + select PLAT_VERSATILE_SCHED_CLOCK + help + This enables support for ARM Ltd RealView boards. + +config ARCH_VERSATILE + bool "ARM Ltd. Versatile family" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select ARM_VIC + select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select HAVE_MACH_CLKDEV + select ICST + select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK + select PLAT_VERSATILE_SCHED_CLOCK + select VERSATILE_FPGA_IRQ + help + This enables support for ARM Ltd Versatile board. + +config ARCH_CLPS711X + bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" + select ARCH_REQUIRE_GPIOLIB + select AUTO_ZRELADDR + select CLKSRC_MMIO + select COMMON_CLK + select CPU_ARM720T + select GENERIC_CLOCKEVENTS + select MFD_SYSCON + select SOC_BUS + help + Support for Cirrus Logic 711x/721x/731x based boards. + +config ARCH_GEMINI + bool "Cortina Systems Gemini" + select ARCH_REQUIRE_GPIOLIB + select CLKSRC_MMIO + select CPU_FA526 + select GENERIC_CLOCKEVENTS + help + Support for the Cortina Systems Gemini family SoCs + +config ARCH_EBSA110 + bool "EBSA-110" + select ARCH_USES_GETTIMEOFFSET + select CPU_SA110 + select ISA + select NEED_MACH_IO_H + select NEED_MACH_MEMORY_H + select NO_IOPORT_MAP + help + This is an evaluation board for the StrongARM processor available + from Digital. It has limited hardware on-board, including an + Ethernet interface, two PCMCIA sockets, two serial ports and a + parallel port. + +config ARCH_EFM32 + bool "Energy Micro efm32" + depends on !MMU + select ARCH_REQUIRE_GPIOLIB + select ARM_NVIC + select AUTO_ZRELADDR + select CLKSRC_OF + select COMMON_CLK + select CPU_V7M + select GENERIC_CLOCKEVENTS + select NO_DMA + select NO_IOPORT_MAP + select SPARSE_IRQ + select USE_OF + help + Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko + processors. + +config ARCH_EP93XX + bool "EP93xx-based" + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET + select ARM_AMBA + select ARM_VIC + select CLKDEV_LOOKUP + select CPU_ARM920T + help + This enables support for the Cirrus EP93xx series of CPUs. + +config ARCH_FOOTBRIDGE + bool "FootBridge" + select CPU_SA110 + select FOOTBRIDGE + select GENERIC_CLOCKEVENTS + select HAVE_IDE + select NEED_MACH_IO_H if !MMU + select NEED_MACH_MEMORY_H + help + Support for systems based on the DC21285 companion chip + ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. + +config ARCH_NETX + bool "Hilscher NetX based" + select ARM_VIC + select CLKSRC_MMIO + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + help + This enables support for systems based on the Hilscher NetX Soc + +config ARCH_IOP13XX + bool "IOP13xx-based" + depends on MMU + select CPU_XSC3 + select NEED_MACH_MEMORY_H + select NEED_RET_TO_USER + select PCI + select PLAT_IOP + select VMSPLIT_1G + select SPARSE_IRQ + help + Support for Intel's IOP13XX (XScale) family of processors. + +config ARCH_IOP32X + bool "IOP32x-based" + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select CPU_XSCALE + select GPIO_IOP + select NEED_RET_TO_USER + select PCI + select PLAT_IOP + help + Support for Intel's 80219 and IOP32X (XScale) family of + processors. + +config ARCH_IOP33X + bool "IOP33x-based" + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select CPU_XSCALE + select GPIO_IOP + select NEED_RET_TO_USER + select PCI + select PLAT_IOP + help + Support for Intel's IOP33X (XScale) family of processors. + +config ARCH_IXP4XX + bool "IXP4xx-based" + depends on MMU + select ARCH_HAS_DMA_SET_COHERENT_MASK + select ARCH_REQUIRE_GPIOLIB + select ARCH_SUPPORTS_BIG_ENDIAN + select CLKSRC_MMIO + select CPU_XSCALE + select DMABOUNCE if PCI + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI + select NEED_MACH_IO_H + select USB_EHCI_BIG_ENDIAN_DESC + select USB_EHCI_BIG_ENDIAN_MMIO + help + Support for Intel's IXP4XX (XScale) family of processors. + +config ARCH_DOVE + bool "Marvell Dove" + select ARCH_REQUIRE_GPIOLIB + select CPU_PJ4 + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI + select MVEBU_MBUS + select PINCTRL + select PINCTRL_DOVE + select PLAT_ORION_LEGACY + help + Support for the Marvell Dove SoC 88AP510 + +config ARCH_MV78XX0 + bool "Marvell MV78xx0" + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select GENERIC_CLOCKEVENTS + select MVEBU_MBUS + select PCI + select PLAT_ORION_LEGACY + help + Support for the following Marvell MV78xx0 series SoCs: + MV781x0, MV782x0. + +config ARCH_ORION5X + bool "Marvell Orion" + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select GENERIC_CLOCKEVENTS + select MVEBU_MBUS + select PCI + select PLAT_ORION_LEGACY + help + Support for the following Marvell Orion 5x series SoCs: + Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), + Orion-2 (5281), Orion-1-90 (6183). + +config ARCH_MMP + bool "Marvell PXA168/910/MMP2" + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select GENERIC_ALLOCATOR + select GENERIC_CLOCKEVENTS + select GPIO_PXA + select IRQ_DOMAIN + select MULTI_IRQ_HANDLER + select PINCTRL + select PLAT_PXA + select SPARSE_IRQ + help + Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. + +config ARCH_KS8695 + bool "Micrel/Kendin KS8695" + select ARCH_REQUIRE_GPIOLIB + select CLKSRC_MMIO + select CPU_ARM922T + select GENERIC_CLOCKEVENTS + select NEED_MACH_MEMORY_H + help + Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based + System-on-Chip devices. + +config ARCH_W90X900 + bool "Nuvoton W90X900 CPU" + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + help + Support for Nuvoton (Winbond logic dept.) ARM9 processor, + At present, the w90x900 has been renamed nuc900, regarding + the ARM series product line, you can login the following + link address to know more. + + <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ + ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> + +config ARCH_LPC32XX + bool "NXP LPC32XX" + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select HAVE_IDE + select USE_OF + help + Support for the NXP LPC32XX family of processors + +config ARCH_PXA + bool "PXA2xx/PXA3xx-based" + depends on MMU + select ARCH_MTD_XIP + select ARCH_REQUIRE_GPIOLIB + select ARM_CPU_SUSPEND if PM + select AUTO_ZRELADDR + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select GPIO_PXA + select HAVE_IDE + select IRQ_DOMAIN + select MULTI_IRQ_HANDLER + select PLAT_PXA + select SPARSE_IRQ + help + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. + +config ARCH_SHMOBILE_LEGACY + bool "Renesas ARM SoCs (non-multiplatform)" + select ARCH_SHMOBILE + select ARM_PATCH_PHYS_VIRT if MMU + select CLKDEV_LOOKUP + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + select MULTI_IRQ_HANDLER + select NO_IOPORT_MAP + select PINCTRL + select PM_GENERIC_DOMAINS if PM + select SH_CLK_CPG + select SPARSE_IRQ + help + Support for Renesas ARM SoC platforms using a non-multiplatform + kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car + and RZ families. + +config ARCH_RPC + bool "RiscPC" + select ARCH_ACORN + select ARCH_MAY_HAVE_PC_FDC + select ARCH_SPARSEMEM_ENABLE + select ARCH_USES_GETTIMEOFFSET + select CPU_SA110 + select FIQ + select HAVE_IDE + select HAVE_PATA_PLATFORM + select ISA_DMA_API + select NEED_MACH_IO_H + select NEED_MACH_MEMORY_H + select NO_IOPORT_MAP + select VIRT_TO_BUS + help + On the Acorn Risc-PC, Linux can support the internal IDE disk and + CD-ROM interface, serial and parallel port, and the floppy drive. + +config ARCH_SA1100 + bool "SA1100-based" + select ARCH_MTD_XIP + select ARCH_REQUIRE_GPIOLIB + select ARCH_SPARSEMEM_ENABLE + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CPU_FREQ + select CPU_SA1100 + select GENERIC_CLOCKEVENTS + select HAVE_IDE + select IRQ_DOMAIN + select ISA + select MULTI_IRQ_HANDLER + select NEED_MACH_MEMORY_H + select SPARSE_IRQ + help + Support for StrongARM 11x0 based boards. + +config ARCH_S3C24XX + bool "Samsung S3C24XX SoCs" + select ARCH_REQUIRE_GPIOLIB + select ATAGS + select CLKDEV_LOOKUP + select CLKSRC_SAMSUNG_PWM + select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select MULTI_IRQ_HANDLER + select NEED_MACH_IO_H + select SAMSUNG_ATAGS + help + Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 + and S3C2450 SoCs based systems, such as the Simtec Electronics BAST + (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the + Samsung SMDK2410 development board (and derivatives). + +config ARCH_S3C64XX + bool "Samsung S3C64XX" + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_VIC + select ATAGS + select CLKDEV_LOOKUP + select CLKSRC_SAMSUNG_PWM + select COMMON_CLK_SAMSUNG + select CPU_V6K + select GENERIC_CLOCKEVENTS + select GPIO_SAMSUNG + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_TCM + select NO_IOPORT_MAP + select PLAT_SAMSUNG + select PM_GENERIC_DOMAINS if PM + select S3C_DEV_NAND + select S3C_GPIO_TRACK + select SAMSUNG_ATAGS + select SAMSUNG_WAKEMASK + select SAMSUNG_WDT_RESET + help + Samsung S3C64XX series based systems + +config ARCH_DAVINCI + bool "TI DaVinci" + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select GENERIC_ALLOCATOR + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select HAVE_IDE + select TI_PRIV_EDMA + select USE_OF + select ZONE_DMA + help + Support for TI's DaVinci platform. + +config ARCH_OMAP1 + bool "TI OMAP1" + depends on MMU + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_OMAP + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select HAVE_IDE + select IRQ_DOMAIN + select NEED_MACH_IO_H if PCCARD + select NEED_MACH_MEMORY_H + help + Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) + +endchoice + +menu "Multiple platform selection" + depends on ARCH_MULTIPLATFORM + +comment "CPU Core family selection" + +config ARCH_MULTI_V4 + bool "ARMv4 based platforms (FA526)" + depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 + select CPU_FA526 + +config ARCH_MULTI_V4T + bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" + depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 + select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ + CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ + CPU_ARM925T || CPU_ARM940T) + +config ARCH_MULTI_V5 + bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" + depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 + select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ + CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ + CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) + +config ARCH_MULTI_V4_V5 + bool + +config ARCH_MULTI_V6 + bool "ARMv6 based platforms (ARM11)" + select ARCH_MULTI_V6_V7 + select CPU_V6K + +config ARCH_MULTI_V7 + bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" + default y + select ARCH_MULTI_V6_V7 + select CPU_V7 + select HAVE_SMP + +config ARCH_MULTI_V6_V7 + bool + select MIGHT_HAVE_CACHE_L2X0 + +config ARCH_MULTI_CPU_AUTO + def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) + select ARCH_MULTI_V5 + +endmenu + +config ARCH_VIRT + bool "Dummy Virtual Machine" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + +# +# This is sorted alphabetically by mach-* pathname. However, plat-* +# Kconfigs may be included either alphabetically (according to the +# plat- suffix) or along side the corresponding mach-* source. +# +source "arch/arm/mach-mvebu/Kconfig" + +source "arch/arm/mach-alpine/Kconfig" + +source "arch/arm/mach-asm9260/Kconfig" + +source "arch/arm/mach-at91/Kconfig" + +source "arch/arm/mach-axxia/Kconfig" + +source "arch/arm/mach-bcm/Kconfig" + +source "arch/arm/mach-berlin/Kconfig" + +source "arch/arm/mach-clps711x/Kconfig" + +source "arch/arm/mach-cns3xxx/Kconfig" + +source "arch/arm/mach-davinci/Kconfig" + +source "arch/arm/mach-digicolor/Kconfig" + +source "arch/arm/mach-dove/Kconfig" + +source "arch/arm/mach-ep93xx/Kconfig" + +source "arch/arm/mach-footbridge/Kconfig" + +source "arch/arm/mach-gemini/Kconfig" + +source "arch/arm/mach-highbank/Kconfig" + +source "arch/arm/mach-hisi/Kconfig" + +source "arch/arm/mach-integrator/Kconfig" + +source "arch/arm/mach-iop32x/Kconfig" + +source "arch/arm/mach-iop33x/Kconfig" + +source "arch/arm/mach-iop13xx/Kconfig" + +source "arch/arm/mach-ixp4xx/Kconfig" + +source "arch/arm/mach-keystone/Kconfig" + +source "arch/arm/mach-ks8695/Kconfig" + +source "arch/arm/mach-meson/Kconfig" + +source "arch/arm/mach-moxart/Kconfig" + +source "arch/arm/mach-mv78xx0/Kconfig" + +source "arch/arm/mach-imx/Kconfig" + +source "arch/arm/mach-mediatek/Kconfig" + +source "arch/arm/mach-mxs/Kconfig" + +source "arch/arm/mach-netx/Kconfig" + +source "arch/arm/mach-nomadik/Kconfig" + +source "arch/arm/mach-nspire/Kconfig" + +source "arch/arm/plat-omap/Kconfig" + +source "arch/arm/mach-omap1/Kconfig" + +source "arch/arm/mach-omap2/Kconfig" + +source "arch/arm/mach-orion5x/Kconfig" + +source "arch/arm/mach-picoxcell/Kconfig" + +source "arch/arm/mach-pxa/Kconfig" +source "arch/arm/plat-pxa/Kconfig" + +source "arch/arm/mach-mmp/Kconfig" + +source "arch/arm/mach-qcom/Kconfig" + +source "arch/arm/mach-realview/Kconfig" + +source "arch/arm/mach-rockchip/Kconfig" + +source "arch/arm/mach-sa1100/Kconfig" + +source "arch/arm/mach-socfpga/Kconfig" + +source "arch/arm/mach-spear/Kconfig" + +source "arch/arm/mach-sti/Kconfig" + +source "arch/arm/mach-s3c24xx/Kconfig" + +source "arch/arm/mach-s3c64xx/Kconfig" + +source "arch/arm/mach-s5pv210/Kconfig" + +source "arch/arm/mach-exynos/Kconfig" +source "arch/arm/plat-samsung/Kconfig" + +source "arch/arm/mach-shmobile/Kconfig" + +source "arch/arm/mach-sunxi/Kconfig" + +source "arch/arm/mach-prima2/Kconfig" + +source "arch/arm/mach-tegra/Kconfig" + +source "arch/arm/mach-u300/Kconfig" + +source "arch/arm/mach-ux500/Kconfig" + +source "arch/arm/mach-versatile/Kconfig" + +source "arch/arm/mach-vexpress/Kconfig" +source "arch/arm/plat-versatile/Kconfig" + +source "arch/arm/mach-vt8500/Kconfig" + +source "arch/arm/mach-w90x900/Kconfig" + +source "arch/arm/mach-zynq/Kconfig" + +# Definitions to make life easier +config ARCH_ACORN + bool + +config PLAT_IOP + bool + select GENERIC_CLOCKEVENTS + +config PLAT_ORION + bool + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + +config PLAT_ORION_LEGACY + bool + select PLAT_ORION + +config PLAT_PXA + bool + +config PLAT_VERSATILE + bool + +config ARM_TIMER_SP804 + bool + select CLKSRC_MMIO + select CLKSRC_OF if OF + +source "arch/arm/firmware/Kconfig" + +source arch/arm/mm/Kconfig + +config IWMMXT + bool "Enable iWMMXt support" + depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B + help + Enable support for iWMMXt context switching at run time if + running on a CPU that supports it. + +config MULTI_IRQ_HANDLER + bool + help + Allow each machine to specify it's own IRQ handler at run time. + +if !MMU +source "arch/arm/Kconfig-nommu" +endif + +config PJ4B_ERRATA_4742 + bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" + depends on CPU_PJ4B && MACH_ARMADA_370 + default y + help + When coming out of either a Wait for Interrupt (WFI) or a Wait for + Event (WFE) IDLE states, a specific timing sensitivity exists between + the retiring WFI/WFE instructions and the newly issued subsequent + instructions. This sensitivity can result in a CPU hang scenario. + Workaround: + The software must insert either a Data Synchronization Barrier (DSB) + or Data Memory Barrier (DMB) command immediately after the WFI/WFE + instruction + +config ARM_ERRATA_326103 + bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" + depends on CPU_V6 + help + Executing a SWP instruction to read-only memory does not set bit 11 + of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to + treat the access as a read, preventing a COW from occurring and + causing the faulting task to livelock. + +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 || CPU_V6K + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + r1p* erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + +config ARM_ERRATA_742230 + bool "ARM errata: DMB operation may be faulty" + depends on CPU_V7 && SMP + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 742230 Cortex-A9 + (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction + between two write operations may not ensure the correct visibility + ordering of the two writes. This workaround sets a specific bit in + the diagnostic register of the Cortex-A9 which causes the DMB + instruction to behave as a DSB, ensuring the correct behaviour of + the two writes. + +config ARM_ERRATA_742231 + bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" + depends on CPU_V7 && SMP + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 742231 Cortex-A9 + (r2p0..r2p2) erratum. Under certain conditions, specific to the + Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, + accessing some data located in the same cache line, may get corrupted + data due to bad handling of the address hazard when the line gets + replaced from one of the CPUs at the same time as another CPU is + accessing it. This workaround sets specific bits in the diagnostic + register of the Cortex-A9 which reduces the linefill issuing + capabilities of the processor. + +config ARM_ERRATA_643719 + bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" + depends on CPU_V7 && SMP + default y + help + This option enables the workaround for the 643719 Cortex-A9 (prior to + r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR + register returns zero when it should return one. The workaround + corrects this value, ensuring cache maintenance operations which use + it behave as intended and avoiding data corruption. + +config ARM_ERRATA_720789 + bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" + depends on CPU_V7 + help + This option enables the workaround for the 720789 Cortex-A9 (prior to + r2p0) erratum. A faulty ASID can be sent to the other CPUs for the + broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. + As a consequence of this erratum, some TLB entries which should be + invalidated are not, resulting in an incoherency in the system page + tables. The workaround changes the TLB flushing routines to invalidate + entries regardless of the ASID. + +config ARM_ERRATA_743622 + bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" + depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 743622 Cortex-A9 + (r2p*) erratum. Under very rare conditions, a faulty + optimisation in the Cortex-A9 Store Buffer may lead to data + corruption. This workaround sets a specific bit in the diagnostic + register of the Cortex-A9 which disables the Store Buffer + optimisation, preventing the defect from occurring. This has no + visible impact on the overall performance or power consumption of the + processor. + +config ARM_ERRATA_751472 + bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" + depends on CPU_V7 + depends on !ARCH_MULTIPLATFORM + help + This option enables the workaround for the 751472 Cortex-A9 (prior + to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the + completion of a following broadcasted operation if the second + operation is received by a CPU before the ICIALLUIS has completed, + potentially leading to corrupted entries in the cache or TLB. + +config ARM_ERRATA_754322 + bool "ARM errata: possible faulty MMU translations following an ASID switch" + depends on CPU_V7 + help + This option enables the workaround for the 754322 Cortex-A9 (r2p*, + r3p*) erratum. A speculative memory access may cause a page table walk + which starts prior to an ASID switch but completes afterwards. This + can populate the micro-TLB with a stale entry which may be hit with + the new ASID. This workaround places two dsb instructions in the mm + switching code so that no page table walks can cross the ASID switch. + +config ARM_ERRATA_754327 + bool "ARM errata: no automatic Store Buffer drain" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 754327 Cortex-A9 (prior to + r2p0) erratum. The Store Buffer does not have any automatic draining + mechanism and therefore a livelock may occur if an external agent + continuously polls a memory location waiting to observe an update. + This workaround defines cpu_relax() as smp_mb(), preventing correctly + written polling loops from denying visibility of updates to memory. + +config ARM_ERRATA_364296 + bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" + depends on CPU_V6 + help + This options enables the workaround for the 364296 ARM1136 + r0p2 erratum (possible cache data corruption with + hit-under-miss enabled). It sets the undocumented bit 31 in + the auxiliary control register and the FI bit in the control + register, thus disabling hit-under-miss without putting the + processor into full low interrupt latency mode. ARM11MPCore + is not affected. + +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + +config ARM_ERRATA_775420 + bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" + depends on CPU_V7 + help + This option enables the workaround for the 775420 Cortex-A9 (r2p2, + r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance + operation aborts with MMU exception, it might cause the processor + to deadlock. This workaround puts DSB before executing ISB if + an abort may occur on cache maintenance. + +config ARM_ERRATA_798181 + bool "ARM errata: TLBI/DSB failure on Cortex-A15" + depends on CPU_V7 && SMP + help + On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not + adequately shooting down all use of the old entries. This + option enables the Linux kernel workaround for this erratum + which sends an IPI to the CPUs that are running the same ASID + as the one being invalidated. + +config ARM_ERRATA_773022 + bool "ARM errata: incorrect instructions may be executed from loop buffer" + depends on CPU_V7 + help + This option enables the workaround for the 773022 Cortex-A15 + (up to r0p4) erratum. In certain rare sequences of code, the + loop buffer may deliver incorrect instructions. This + workaround disables the loop buffer to avoid the erratum. + +endmenu + +source "arch/arm/common/Kconfig" + +menu "Bus support" + +config ISA + bool + help + Find out whether you have ISA slots on your motherboard. ISA is the + name of a bus system, i.e. the way the CPU talks to the other stuff + inside your box. Other bus systems are PCI, EISA, MicroChannel + (MCA) or VESA. ISA is an older system, now being displaced by PCI; + newer boards don't support it. If you have ISA, say Y, otherwise N. + +# Select ISA DMA controller support +config ISA_DMA + bool + select ISA_DMA_API + +# Select ISA DMA interface +config ISA_DMA_API + bool + +config PCI + bool "PCI support" if MIGHT_HAVE_PCI + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + +config PCI_DOMAINS + bool + depends on PCI + +config PCI_DOMAINS_GENERIC + def_bool PCI_DOMAINS + +config PCI_NANOENGINE + bool "BSE nanoEngine PCI support" + depends on SA1100_NANOENGINE + help + Enable PCI on the BSE nanoEngine board. + +config PCI_SYSCALL + def_bool PCI + +config PCI_HOST_ITE8152 + bool + depends on PCI && MACH_ARMCORE + default y + select DMABOUNCE + +source "drivers/pci/Kconfig" +source "drivers/pci/pcie/Kconfig" + +source "drivers/pcmcia/Kconfig" + +endmenu + +menu "Kernel Features" + +config HAVE_SMP + bool + help + This option should be selected by machines which have an SMP- + capable CPU. + + The only effect of this option is to make the SMP-related + options available to the user for configuration. + +config SMP + bool "Symmetric Multi-Processing" + depends on CPU_V6K || CPU_V7 + depends on GENERIC_CLOCKEVENTS + depends on HAVE_SMP + depends on MMU || ARM_MPU + help + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on uni- and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + uniprocessor machines. On a uniprocessor machine, the kernel + will run faster if you say N here. + + See also <file:Documentation/x86/i386/IO-APIC.txt>, + <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at + <http://tldp.org/HOWTO/SMP-HOWTO.html>. + + If you don't know what to do here, say N. + +config SMP_ON_UP + bool "Allow booting SMP kernel on uniprocessor systems" + depends on SMP && !XIP_KERNEL && MMU + default y + help + SMP kernels contain instructions which fail on non-SMP processors. + Enabling this option allows the kernel to modify itself to make + these instructions safe. Disabling it allows about 1K of space + savings. + + If you don't know what to do here, say Y. + +config ARM_CPU_TOPOLOGY + bool "Support cpu topology definition" + depends on SMP && CPU_V7 + default y + help + Support ARM cpu topology definition. The MPIDR register defines + affinity between processors which is then used to describe the cpu + topology of an ARM System. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + +config HAVE_ARM_SCU + bool + help + This option enables support for the ARM system coherency unit + +config HAVE_ARM_ARCH_TIMER + bool "Architected timer support" + depends on CPU_V7 + select ARM_ARCH_TIMER + select GENERIC_CLOCKEVENTS + help + This option enables support for the ARM architected timer + +config HAVE_ARM_TWD + bool + depends on SMP + select CLKSRC_OF if OF + help + This options enables support for the ARM timer and watchdog unit + +config MCPM + bool "Multi-Cluster Power Management" + depends on CPU_V7 && SMP + help + This option provides the common power management infrastructure + for (multi-)cluster based systems, such as big.LITTLE based + systems. + +config MCPM_QUAD_CLUSTER + bool + depends on MCPM + help + To avoid wasting resources unnecessarily, MCPM only supports up + to 2 clusters by default. + Platforms with 3 or 4 clusters that use MCPM must select this + option to allow the additional clusters to be managed. + +config BIG_LITTLE + bool "big.LITTLE support (Experimental)" + depends on CPU_V7 && SMP + select MCPM + help + This option enables support selections for the big.LITTLE + system architecture. + +config BL_SWITCHER + bool "big.LITTLE switcher support" + depends on BIG_LITTLE && MCPM && HOTPLUG_CPU + select ARM_CPU_SUSPEND + select CPU_PM + help + The big.LITTLE "switcher" provides the core functionality to + transparently handle transition between a cluster of A15's + and a cluster of A7's in a big.LITTLE system. + +config BL_SWITCHER_DUMMY_IF + tristate "Simple big.LITTLE switcher user interface" + depends on BL_SWITCHER && DEBUG_KERNEL + help + This is a simple and dummy char dev interface to control + the big.LITTLE switcher core code. It is meant for + debugging purposes only. + +choice + prompt "Memory split" + depends on MMU + default VMSPLIT_3G + help + Select the desired split between kernel and user memory. + + If you are not absolutely sure what you are doing, leave this + option alone! + + config VMSPLIT_3G + bool "3G/1G user/kernel split" + config VMSPLIT_2G + bool "2G/2G user/kernel split" + config VMSPLIT_1G + bool "1G/3G user/kernel split" +endchoice + +config PAGE_OFFSET + hex + default PHYS_OFFSET if !MMU + default 0x40000000 if VMSPLIT_1G + default 0x80000000 if VMSPLIT_2G + default 0xC0000000 + +config NR_CPUS + int "Maximum number of CPUs (2-32)" + range 2 32 + depends on SMP + default "4" + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu. + +config ARM_PSCI + bool "Support for the ARM Power State Coordination Interface (PSCI)" + depends on CPU_V7 + help + Say Y here if you want Linux to communicate with system firmware + implementing the PSCI specification for CPU-centric power + management operations described in ARM document number ARM DEN + 0022A ("Power State Coordination Interface System Software on + ARM processors"). + +# The GPIO number here must be sorted by descending number. In case of +# a multiplatform kernel, we just want the highest value required by the +# selected platforms. +config ARCH_NR_GPIO + int + default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ + default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ + SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 + default 416 if ARCH_SUNXI + default 392 if ARCH_U8500 + default 352 if ARCH_VT8500 + default 288 if ARCH_ROCKCHIP + default 264 if MACH_H4700 + default 0 + help + Maximum number of GPIOs in the system. + + If unsure, leave the default value. + +source kernel/Kconfig.preempt + +config HZ_FIXED + int + default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ + ARCH_S5PV210 || ARCH_EXYNOS4 + default 128 if SOC_AT91RM9200 + default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY + default 0 + +choice + depends on HZ_FIXED = 0 + prompt "Timer frequency" + +config HZ_100 + bool "100 Hz" + +config HZ_200 + bool "200 Hz" + +config HZ_250 + bool "250 Hz" + +config HZ_300 + bool "300 Hz" + +config HZ_500 + bool "500 Hz" + +config HZ_1000 + bool "1000 Hz" + +endchoice + +config HZ + int + default HZ_FIXED if HZ_FIXED != 0 + default 100 if HZ_100 + default 200 if HZ_200 + default 250 if HZ_250 + default 300 if HZ_300 + default 500 if HZ_500 + default 1000 + +config SCHED_HRTICK + def_bool HIGH_RES_TIMERS + +config THUMB2_KERNEL + bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY + depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K + default y if CPU_THUMBONLY + select AEABI + select ARM_ASM_UNIFIED + select ARM_UNWIND + help + By enabling this option, the kernel will be compiled in + Thumb-2 mode. A compiler/assembler that understand the unified + ARM-Thumb syntax is needed. + + If unsure, say N. + +config THUMB2_AVOID_R_ARM_THM_JUMP11 + bool "Work around buggy Thumb-2 short branch relocations in gas" + depends on THUMB2_KERNEL && MODULES + default y + help + Various binutils versions can resolve Thumb-2 branches to + locally-defined, preemptible global symbols as short-range "b.n" + branch instructions. + + This is a problem, because there's no guarantee the final + destination of the symbol, or any candidate locations for a + trampoline, are within range of the branch. For this reason, the + kernel does not support fixing up the R_ARM_THM_JUMP11 (102) + relocation in modules at all, and it makes little sense to add + support. + + The symptom is that the kernel fails with an "unsupported + relocation" error when loading some modules. + + Until fixed tools are available, passing + -fno-optimize-sibling-calls to gcc should prevent gcc generating + code which hits this problem, at the cost of a bit of extra runtime + stack usage in some cases. + + The problem is described in more detail at: + https://bugs.launchpad.net/binutils-linaro/+bug/725126 + + Only Thumb-2 kernels are affected. + + Unless you are sure your tools don't have this problem, say Y. + +config ARM_ASM_UNIFIED + bool + +config AEABI + bool "Use the ARM EABI to compile the kernel" + help + This option allows for the kernel to be compiled using the latest + ARM ABI (aka EABI). This is only useful if you are using a user + space environment that is also compiled with EABI. + + Since there are major incompatibilities between the legacy ABI and + EABI, especially with regard to structure member alignment, this + option also changes the kernel syscall calling convention to + disambiguate both ABIs and allow for backward compatibility support + (selected with CONFIG_OABI_COMPAT). + + To use this you need GCC version 4.0.0 or later. + +config OABI_COMPAT + bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" + depends on AEABI && !THUMB2_KERNEL + help + This option preserves the old syscall interface along with the + new (ARM EABI) one. It also provides a compatibility layer to + intercept syscalls that have structure arguments which layout + in memory differs between the legacy ABI and the new ARM EABI + (only for non "thumb" binaries). This option adds a tiny + overhead to all syscalls and produces a slightly larger kernel. + + The seccomp filter system will not be available when this is + selected, since there is no way yet to sensibly distinguish + between calling conventions during filtering. + + If you know you'll be using only pure EABI user space then you + can say N here. If this option is not selected and you attempt + to execute a legacy ABI binary then the result will be + UNPREDICTABLE (in fact it can be predicted that it won't work + at all). If in doubt say N. + +config ARCH_HAS_HOLES_MEMORYMODEL + bool + +config ARCH_SPARSEMEM_ENABLE + bool + +config ARCH_SPARSEMEM_DEFAULT + def_bool ARCH_SPARSEMEM_ENABLE + +config ARCH_SELECT_MEMORY_MODEL + def_bool ARCH_SPARSEMEM_ENABLE + +config HAVE_ARCH_PFN_VALID + def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM + +config HAVE_GENERIC_RCU_GUP + def_bool y + depends on ARM_LPAE + +config HIGHMEM + bool "High Memory Support" + depends on MMU + help + The address space of ARM processors is only 4 Gigabytes large + and it has to accommodate user address space, kernel address + space as well as some memory mapped IO. That means that, if you + have a large amount of physical memory and/or IO, not all of the + memory can be "permanently mapped" by the kernel. The physical + memory that is not permanently mapped is called "high memory". + + Depending on the selected kernel/user memory split, minimum + vmalloc space and actual amount of RAM, you may not need this + option which should result in a slightly faster kernel. + + If unsure, say n. + +config HIGHPTE + bool "Allocate 2nd-level pagetables from highmem" + depends on HIGHMEM + +config HW_PERF_EVENTS + bool "Enable hardware performance counter support for perf events" + depends on PERF_EVENTS + default y + help + Enable hardware performance counter support for perf events. If + disabled, perf events will use software events only. + +config SYS_SUPPORTS_HUGETLBFS + def_bool y + depends on ARM_LPAE + +config HAVE_ARCH_TRANSPARENT_HUGEPAGE + def_bool y + depends on ARM_LPAE + +config ARCH_WANT_GENERAL_HUGETLB + def_bool y + +source "mm/Kconfig" + +config FORCE_MAX_ZONEORDER + int "Maximum zone order" if ARCH_SHMOBILE_LEGACY + range 11 64 if ARCH_SHMOBILE_LEGACY + default "12" if SOC_AM33XX + default "9" if SA1111 || ARCH_EFM32 + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + +config ALIGNMENT_TRAP + bool + depends on CPU_CP15_MMU + default y if !ARCH_EBSA110 + select HAVE_PROC_CPU if PROC_FS + help + ARM processors cannot fetch/store information which is not + naturally aligned on the bus, i.e., a 4 byte fetch must start at an + address divisible by 4. On 32-bit ARM processors, these non-aligned + fetch/store instructions will be emulated in software if you say + here, which has a severe performance impact. This is necessary for + correct operation of some network protocols. With an IP-only + configuration it is safe to say N, otherwise say Y. + +config UACCESS_WITH_MEMCPY + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" + depends on MMU + default y if CPU_FEROCEON + help + Implement faster copy_to_user and clear_user methods for CPU + cores where a 8-word STM instruction give significantly higher + memory write throughput than a sequence of individual 32bit stores. + + A possible side effect is a slight increase in scheduling latency + between threads sharing the same address space if they invoke + such copy operations with large buffers. + + However, if the CPU data cache is using a write-allocate mode, + this option is unlikely to provide any performance gain. + +config SECCOMP + bool + prompt "Enable seccomp to safely compute untrusted bytecode" + ---help--- + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + +config SWIOTLB + def_bool y + +config IOMMU_HELPER + def_bool SWIOTLB + +config XEN_DOM0 + def_bool y + depends on XEN + +config XEN + bool "Xen guest support on ARM" + depends on ARM && AEABI && OF + depends on CPU_V7 && !CPU_V6 + depends on !GENERIC_ATOMIC64 + depends on MMU + select ARCH_DMA_ADDR_T_64BIT + select ARM_PSCI + select SWIOTLB_XEN + help + Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. + +endmenu + +menu "Boot options" + +config USE_OF + bool "Flattened Device Tree support" + select IRQ_DOMAIN + select OF + select OF_EARLY_FLATTREE + select OF_RESERVED_MEM + help + Include support for flattened device tree machine descriptions. + +config ATAGS + bool "Support for the traditional ATAGS boot data passing" if USE_OF + default y + help + This is the traditional way of passing data to the kernel at boot + time. If you are solely relying on the flattened device tree (or + the ARM_ATAG_DTB_COMPAT option) then you may unselect this option + to remove ATAGS support from your kernel binary. If unsure, + leave this to y. + +config DEPRECATED_PARAM_STRUCT + bool "Provide old way to pass kernel parameters" + depends on ATAGS + help + This was deprecated in 2001 and announced to live on for 5 years. + Some old boot loaders still use this way. + +# Compressed boot loader in ROM. Yes, we really want to ask about +# TEXT and BSS so we preserve their values in the config files. +config ZBOOT_ROM_TEXT + hex "Compressed ROM boot loader base address" + default "0" + help + The physical address at which the ROM-able zImage is to be + placed in the target. Platforms which normally make use of + ROM-able zImage formats normally set this to a suitable + value in their defconfig file. + + If ZBOOT_ROM is not enabled, this has no effect. + +config ZBOOT_ROM_BSS + hex "Compressed ROM boot loader BSS address" + default "0" + help + The base address of an area of read/write memory in the target + for the ROM-able zImage which must be available while the + decompressor is running. It must be large enough to hold the + entire decompressed kernel plus an additional 128 KiB. + Platforms which normally make use of ROM-able zImage formats + normally set this to a suitable value in their defconfig file. + + If ZBOOT_ROM is not enabled, this has no effect. + +config ZBOOT_ROM + bool "Compressed boot loader in ROM/flash" + depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS + depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR + help + Say Y here if you intend to execute your compressed kernel image + (zImage) directly from ROM or flash. If unsure, say N. + +config ARM_APPENDED_DTB + bool "Use appended device tree blob to zImage (EXPERIMENTAL)" + depends on OF + help + With this option, the boot code will look for a device tree binary + (DTB) appended to zImage + (e.g. cat zImage <filename>.dtb > zImage_w_dtb). + + This is meant as a backward compatibility convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + Beware that there is very little in terms of protection against + this option being confused by leftover garbage in memory that might + look like a DTB header after a reboot if no actual DTB is appended + to zImage. Do not leave this option active in a production kernel + if you don't intend to always append a DTB. Proper passing of the + location into r2 of a bootloader provided DTB is always preferable + to this option. + +config ARM_ATAG_DTB_COMPAT + bool "Supplement the appended DTB with traditional ATAG information" + depends on ARM_APPENDED_DTB + help + Some old bootloaders can't be updated to a DTB capable one, yet + they provide ATAGs with memory configuration, the ramdisk address, + the kernel cmdline string, etc. Such information is dynamically + provided by the bootloader and can't always be stored in a static + DTB. To allow a device tree enabled kernel to be used with such + bootloaders, this option allows zImage to extract the information + from the ATAG list and store it at run time into the appended DTB. + +choice + prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT + default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER + +config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader instead of + the device tree bootargs property. If the boot loader doesn't provide + any, the device tree bootargs property will be used. + +config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND + bool "Extend with bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + +endchoice + +config CMDLINE + string "Default kernel command string" + default "" + help + On some architectures (EBSA110 and CATS), there is currently no way + for the boot loader to pass arguments to the kernel. For these + architectures, you should supply some command-line options at build + time by entering them here. As a minimum, you should specify the + memory size and the root device (e.g., mem=64M root=/dev/nfs). + +choice + prompt "Kernel command line type" if CMDLINE != "" + default CMDLINE_FROM_BOOTLOADER + depends on ATAGS + +config CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader. If + the boot loader doesn't provide any, the default kernel command + string provided in CMDLINE will be used. + +config CMDLINE_EXTEND + bool "Extend bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the default kernel command string. + +config CMDLINE_FORCE + bool "Always use the default kernel command string" + help + Always use the default kernel command string, even if the boot + loader passes other arguments to the kernel. + This is useful if you cannot or don't want to change the + command-line options your boot loader passes to the kernel. +endchoice + +config XIP_KERNEL + bool "Kernel Execute-In-Place from ROM" + depends on !ARM_LPAE && !ARCH_MULTIPLATFORM + help + Execute-In-Place allows the kernel to run from non-volatile storage + directly addressable by the CPU, such as NOR flash. This saves RAM + space since the text section of the kernel is not loaded from flash + to RAM. Read-write sections, such as the data section and stack, + are still copied to RAM. The XIP kernel is not compressed since + it has to run directly from flash, so it will take more space to + store it. The flash address used to link the kernel object files, + and for storing it, is configuration dependent. Therefore, if you + say Y here, you must know the proper physical address where to + store the kernel image depending on your own flash memory usage. + + Also note that the make target becomes "make xipImage" rather than + "make zImage" or "make Image". The final kernel binary to put in + ROM memory will be arch/arm/boot/xipImage. + + If unsure, say N. + +config XIP_PHYS_ADDR + hex "XIP Kernel Physical Location" + depends on XIP_KERNEL + default "0x00080000" + help + This is the physical address in your flash memory the kernel will + be linked for and stored to. This address is dependent on your + own flash usage. + +config KEXEC + bool "Kexec system call (EXPERIMENTAL)" + depends on (!SMP || PM_SLEEP_SMP) + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. + +config ATAGS_PROC + bool "Export atags in procfs" + depends on ATAGS && KEXEC + default y + help + Should the atags used to boot the kernel be exported in an "atags" + file in procfs. Useful with kexec. + +config CRASH_DUMP + bool "Build kdump crash kernel (EXPERIMENTAL)" + help + Generate crash dump after being started by kexec. This should + be normally only set in special crash dump kernels which are + loaded in the main kernel with kexec-tools into a specially + reserved region and then later executed after a crash by + kdump/kexec. The crash dump kernel must be compiled to a + memory address not used by the main kernel + + For more details see Documentation/kdump/kdump.txt + +config AUTO_ZRELADDR + bool "Auto calculation of the decompressed kernel image address" + help + ZRELADDR is the physical address where the decompressed kernel + image will be placed. If AUTO_ZRELADDR is selected, the address + will be determined at run-time by masking the current IP with + 0xf8000000. This assumes the zImage being placed in the first 128MB + from start of memory. + +endmenu + +menu "CPU Power Management" + +source "drivers/cpufreq/Kconfig" + +source "drivers/cpuidle/Kconfig" + +endmenu + +menu "Floating point emulation" + +comment "At least one emulation must be selected" + +config FPE_NWFPE + bool "NWFPE math emulation" + depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL + ---help--- + Say Y to include the NWFPE floating point emulator in the kernel. + This is necessary to run most binaries. Linux does not currently + support floating point hardware so you need to say Y here even if + your machine has an FPA or floating point co-processor podule. + + You may say N here if you are going to load the Acorn FPEmulator + early in the bootup. + +config FPE_NWFPE_XP + bool "Support extended precision" + depends on FPE_NWFPE + help + Say Y to include 80-bit support in the kernel floating-point + emulator. Otherwise, only 32 and 64-bit support is compiled in. + Note that gcc does not generate 80-bit operations by default, + so in most cases this option only enlarges the size of the + floating point emulator without any good reason. + + You almost surely want to say N here. + +config FPE_FASTFPE + bool "FastFPE math emulation (EXPERIMENTAL)" + depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 + ---help--- + Say Y here to include the FAST floating point emulator in the kernel. + This is an experimental much faster emulator which now also has full + precision for the mantissa. It does not support any exceptions. + It is very simple, and approximately 3-6 times faster than NWFPE. + + It should be sufficient for most programs. It may be not suitable + for scientific calculations, but you have to check this for yourself. + If you do not feel you need a faster FP emulation you should better + choose NWFPE. + +config VFP + bool "VFP-format floating point maths" + depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON + help + Say Y to include VFP support code in the kernel. This is needed + if your hardware includes a VFP unit. + + Please see <file:Documentation/arm/VFP/release-notes.txt> for + release notes and additional status information. + + Say N if your target does not have VFP hardware. + +config VFPv3 + bool + depends on VFP + default y if CPU_V7 + +config NEON + bool "Advanced SIMD (NEON) Extension support" + depends on VFPv3 && CPU_V7 + help + Say Y to include support code for NEON, the ARMv7 Advanced SIMD + Extension. + +config KERNEL_MODE_NEON + bool "Support for NEON in kernel mode" + depends on NEON && AEABI + help + Say Y to include support for NEON in kernel mode. + +endmenu + +menu "Userspace binary formats" + +source "fs/Kconfig.binfmt" + +endmenu + +menu "Power management options" + +source "kernel/power/Kconfig" + +config ARCH_SUSPEND_POSSIBLE + depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ + CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK + def_bool y + +config ARM_CPU_SUSPEND + def_bool PM_SLEEP + +config ARCH_HIBERNATION_POSSIBLE + bool + depends on MMU + default y if ARCH_SUSPEND_POSSIBLE + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "drivers/firmware/Kconfig" + +source "fs/Kconfig" + +source "arch/arm/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" +if CRYPTO +source "arch/arm/crypto/Kconfig" +endif + +source "lib/Kconfig" + +source "arch/arm/kvm/Kconfig" |