summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/armada-388-gp.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/armada-388-gp.dts')
-rw-r--r--arch/arm/boot/dts/armada-388-gp.dts19
1 files changed, 17 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 353c92532..a633be3de 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -58,7 +58,9 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
@@ -205,8 +207,21 @@
sdhci@d8000 {
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
- cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
no-1-8-v;
+ /*
+ * A388-GP board v1.5 and higher replace
+ * hitherto card detection method based on GPIO
+ * with the one using DAT3 pin. As they are
+ * incompatible, software-based polling is
+ * enabled with 'broken-cd' property. For boards
+ * older than v1.5 it can be replaced with:
+ * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
+ * whereas for the newer ones following can be
+ * used instead:
+ * 'dat3-cd;'
+ * 'cd-inverted;'
+ */
+ broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";