diff options
Diffstat (limited to 'arch/arm/boot/dts/imx28-sps1.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx28-sps1.dts | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts new file mode 100644 index 000000000..0ce3cb8e7 --- /dev/null +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -0,0 +1,171 @@ +/* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx28.dtsi" + +/ { + model = "SchulerControl GmbH, SC SPS 1"; + compatible = "schulercontrol,imx28-sps1", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D06__GPIO_0_6 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256", "mr25h256"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom: eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + pagesize = <32>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb0_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gpio-leds"; + status = "okay"; + + led@1 { + label = "sps1-1:yellow:user"; + gpios = <&gpio0 6 0>; + linux,default-trigger = "heartbeat"; + reg = <0>; + }; + + led@2 { + label = "sps1-2:red:user"; + gpios = <&gpio0 3 0>; + linux,default-trigger = "heartbeat"; + reg = <1>; + }; + + led@3 { + label = "sps1-3:red:user"; + gpios = <&gpio0 0 0>; + default-trigger = "heartbeat"; + reg = <2>; + }; + + }; +}; |