summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx28.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx28.dtsi')
-rw-r--r--arch/arm/boot/dts/imx28.dtsi1250
1 files changed, 1250 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
new file mode 100644
index 000000000..4e073e854
--- /dev/null
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -0,0 +1,1250 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+#include "imx28-pinfunc.h"
+
+/ {
+ interrupt-parent = <&icoll>;
+
+ aliases {
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ saif0 = &saif0;
+ saif1 = &saif1;
+ serial0 = &auart0;
+ serial1 = &auart1;
+ serial2 = &auart2;
+ serial3 = &auart3;
+ serial4 = &auart4;
+ spi0 = &ssp1;
+ spi1 = &ssp2;
+ usbphy0 = &usbphy0;
+ usbphy1 = &usbphy1;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ apb@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x80000>;
+ ranges;
+
+ apbh@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x3c900>;
+ ranges;
+
+ icoll: interrupt-controller@80000000 {
+ compatible = "fsl,imx28-icoll", "fsl,icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80000000 0x2000>;
+ };
+
+ hsadc: hsadc@80002000 {
+ reg = <0x80002000 0x2000>;
+ interrupts = <13>;
+ dmas = <&dma_apbh 12>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dma_apbh: dma-apbh@80004000 {
+ compatible = "fsl,imx28-dma-apbh";
+ reg = <0x80004000 0x2000>;
+ interrupts = <82 83 84 85
+ 88 88 88 88
+ 88 88 88 88
+ 87 86 0 0>;
+ interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+ "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+ "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+ "hsadc", "lcdif", "empty", "empty";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ clocks = <&clks 25>;
+ };
+
+ perfmon: perfmon@80006000 {
+ reg = <0x80006000 0x800>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ gpmi: gpmi-nand@8000c000 {
+ compatible = "fsl,imx28-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <41>;
+ interrupt-names = "bch";
+ clocks = <&clks 50>;
+ clock-names = "gpmi_io";
+ dmas = <&dma_apbh 4>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ ssp0: ssp@80010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80010000 0x2000>;
+ interrupts = <96>;
+ clocks = <&clks 46>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ ssp1: ssp@80012000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80012000 0x2000>;
+ interrupts = <97>;
+ clocks = <&clks 47>;
+ dmas = <&dma_apbh 1>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80014000 0x2000>;
+ interrupts = <98>;
+ clocks = <&clks 48>;
+ dmas = <&dma_apbh 2>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ ssp3: ssp@80016000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80016000 0x2000>;
+ interrupts = <99>;
+ clocks = <&clks 49>;
+ dmas = <&dma_apbh 3>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@80018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-pinctrl", "simple-bus";
+ reg = <0x80018000 0x2000>;
+
+ gpio0: gpio@0 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <127>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@1 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <126>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <125>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@3 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <124>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@4 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ interrupts = <123>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ duart_pins_a: duart@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM0__DUART_RX
+ MX28_PAD_PWM1__DUART_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ duart_pins_b: duart@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_CTS__DUART_RX
+ MX28_PAD_AUART0_RTS__DUART_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ duart_4pins_a: duart-4pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_CTS__DUART_RX
+ MX28_PAD_AUART0_RTS__DUART_TX
+ MX28_PAD_AUART0_RX__DUART_CTS
+ MX28_PAD_AUART0_TX__DUART_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ gpmi_pins_a: gpmi-nand@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D00__GPMI_D0
+ MX28_PAD_GPMI_D01__GPMI_D1
+ MX28_PAD_GPMI_D02__GPMI_D2
+ MX28_PAD_GPMI_D03__GPMI_D3
+ MX28_PAD_GPMI_D04__GPMI_D4
+ MX28_PAD_GPMI_D05__GPMI_D5
+ MX28_PAD_GPMI_D06__GPMI_D6
+ MX28_PAD_GPMI_D07__GPMI_D7
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N
+ MX28_PAD_GPMI_RDY0__GPMI_READY0
+ MX28_PAD_GPMI_RDN__GPMI_RDN
+ MX28_PAD_GPMI_WRN__GPMI_WRN
+ MX28_PAD_GPMI_ALE__GPMI_ALE
+ MX28_PAD_GPMI_CLE__GPMI_CLE
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ gpmi_status_cfg: gpmi-status-cfg {
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_RDN__GPMI_RDN
+ MX28_PAD_GPMI_WRN__GPMI_WRN
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ };
+
+ auart0_pins_a: auart0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_RX__AUART0_RX
+ MX28_PAD_AUART0_TX__AUART0_TX
+ MX28_PAD_AUART0_CTS__AUART0_CTS
+ MX28_PAD_AUART0_RTS__AUART0_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart0_2pins_a: auart0-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_RX__AUART0_RX
+ MX28_PAD_AUART0_TX__AUART0_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart1_pins_a: auart1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RX__AUART1_RX
+ MX28_PAD_AUART1_TX__AUART1_TX
+ MX28_PAD_AUART1_CTS__AUART1_CTS
+ MX28_PAD_AUART1_RTS__AUART1_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart1_2pins_a: auart1-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RX__AUART1_RX
+ MX28_PAD_AUART1_TX__AUART1_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart2_2pins_a: auart2-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__AUART2_RX
+ MX28_PAD_SSP2_MOSI__AUART2_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart2_2pins_b: auart2-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__AUART2_RX
+ MX28_PAD_AUART2_TX__AUART2_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart2_pins_a: auart2-pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__AUART2_RX
+ MX28_PAD_AUART2_TX__AUART2_TX
+ MX28_PAD_AUART2_CTS__AUART2_CTS
+ MX28_PAD_AUART2_RTS__AUART2_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart3_pins_a: auart3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART3_RX__AUART3_RX
+ MX28_PAD_AUART3_TX__AUART3_TX
+ MX28_PAD_AUART3_CTS__AUART3_CTS
+ MX28_PAD_AUART3_RTS__AUART3_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart3_2pins_a: auart3-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_MISO__AUART3_RX
+ MX28_PAD_SSP2_SS0__AUART3_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart3_2pins_b: auart3-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART3_RX__AUART3_RX
+ MX28_PAD_AUART3_TX__AUART3_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart4_2pins_a: auart4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP3_SCK__AUART4_TX
+ MX28_PAD_SSP3_MOSI__AUART4_RX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_pins_a: mac0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_MDC__ENET0_MDC
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mac1_pins_a: mac1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1
+ MX28_PAD_ENET0_COL__ENET1_TX_EN
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc0_8bit_pins_a: mmc0-8bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA0__SSP0_D0
+ MX28_PAD_SSP0_DATA1__SSP0_D1
+ MX28_PAD_SSP0_DATA2__SSP0_D2
+ MX28_PAD_SSP0_DATA3__SSP0_D3
+ MX28_PAD_SSP0_DATA4__SSP0_D4
+ MX28_PAD_SSP0_DATA5__SSP0_D5
+ MX28_PAD_SSP0_DATA6__SSP0_D6
+ MX28_PAD_SSP0_DATA7__SSP0_D7
+ MX28_PAD_SSP0_CMD__SSP0_CMD
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+ MX28_PAD_SSP0_SCK__SSP0_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc0_4bit_pins_a: mmc0-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA0__SSP0_D0
+ MX28_PAD_SSP0_DATA1__SSP0_D1
+ MX28_PAD_SSP0_DATA2__SSP0_D2
+ MX28_PAD_SSP0_DATA3__SSP0_D3
+ MX28_PAD_SSP0_CMD__SSP0_CMD
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+ MX28_PAD_SSP0_SCK__SSP0_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc0_cd_cfg: mmc0-cd-cfg {
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+ >;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc0_sck_cfg: mmc0-sck-cfg {
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_SCK__SSP0_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc1_4bit_pins_a: mmc1-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D00__SSP1_D0
+ MX28_PAD_GPMI_D01__SSP1_D1
+ MX28_PAD_GPMI_D02__SSP1_D2
+ MX28_PAD_GPMI_D03__SSP1_D3
+ MX28_PAD_GPMI_RDY1__SSP1_CMD
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+ MX28_PAD_GPMI_WRN__SSP1_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc1_cd_cfg: mmc1-cd-cfg {
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+ >;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc1_sck_cfg: mmc1-sck-cfg {
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_WRN__SSP1_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+
+ mmc2_4bit_pins_a: mmc2-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA4__SSP2_D0
+ MX28_PAD_SSP1_SCK__SSP2_D1
+ MX28_PAD_SSP1_CMD__SSP2_D2
+ MX28_PAD_SSP0_DATA5__SSP2_D3
+ MX28_PAD_SSP0_DATA6__SSP2_CMD
+ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+ MX28_PAD_SSP0_DATA7__SSP2_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc2_cd_cfg: mmc2-cd-cfg {
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+ >;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc2_sck_cfg: mmc2-sck-cfg {
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA7__SSP2_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ i2c0_pins_a: i2c0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_I2C0_SCL__I2C0_SCL
+ MX28_PAD_I2C0_SDA__I2C0_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ i2c0_pins_b: i2c0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_RX__I2C0_SCL
+ MX28_PAD_AUART0_TX__I2C0_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM0__I2C1_SCL
+ MX28_PAD_PWM1__I2C1_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ i2c1_pins_b: i2c1@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_CTS__I2C1_SCL
+ MX28_PAD_AUART2_RTS__I2C1_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ saif0_pins_a: saif0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+ MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+ MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ saif0_pins_b: saif0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+ MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+ MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ saif1_pins_a: saif1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ pwm0_pins_a: pwm0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM0__PWM_0
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ pwm2_pins_a: pwm2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__PWM_2
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ pwm3_pins_a: pwm3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM3__PWM_3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ pwm3_pins_b: pwm3@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_MCLK__PWM_3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ pwm4_pins_a: pwm4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM4__PWM_4
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_24bit_pins_a: lcdif-24bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D00__LCD_D0
+ MX28_PAD_LCD_D01__LCD_D1
+ MX28_PAD_LCD_D02__LCD_D2
+ MX28_PAD_LCD_D03__LCD_D3
+ MX28_PAD_LCD_D04__LCD_D4
+ MX28_PAD_LCD_D05__LCD_D5
+ MX28_PAD_LCD_D06__LCD_D6
+ MX28_PAD_LCD_D07__LCD_D7
+ MX28_PAD_LCD_D08__LCD_D8
+ MX28_PAD_LCD_D09__LCD_D9
+ MX28_PAD_LCD_D10__LCD_D10
+ MX28_PAD_LCD_D11__LCD_D11
+ MX28_PAD_LCD_D12__LCD_D12
+ MX28_PAD_LCD_D13__LCD_D13
+ MX28_PAD_LCD_D14__LCD_D14
+ MX28_PAD_LCD_D15__LCD_D15
+ MX28_PAD_LCD_D16__LCD_D16
+ MX28_PAD_LCD_D17__LCD_D17
+ MX28_PAD_LCD_D18__LCD_D18
+ MX28_PAD_LCD_D19__LCD_D19
+ MX28_PAD_LCD_D20__LCD_D20
+ MX28_PAD_LCD_D21__LCD_D21
+ MX28_PAD_LCD_D22__LCD_D22
+ MX28_PAD_LCD_D23__LCD_D23
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_18bit_pins_a: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D00__LCD_D0
+ MX28_PAD_LCD_D01__LCD_D1
+ MX28_PAD_LCD_D02__LCD_D2
+ MX28_PAD_LCD_D03__LCD_D3
+ MX28_PAD_LCD_D04__LCD_D4
+ MX28_PAD_LCD_D05__LCD_D5
+ MX28_PAD_LCD_D06__LCD_D6
+ MX28_PAD_LCD_D07__LCD_D7
+ MX28_PAD_LCD_D08__LCD_D8
+ MX28_PAD_LCD_D09__LCD_D9
+ MX28_PAD_LCD_D10__LCD_D10
+ MX28_PAD_LCD_D11__LCD_D11
+ MX28_PAD_LCD_D12__LCD_D12
+ MX28_PAD_LCD_D13__LCD_D13
+ MX28_PAD_LCD_D14__LCD_D14
+ MX28_PAD_LCD_D15__LCD_D15
+ MX28_PAD_LCD_D16__LCD_D16
+ MX28_PAD_LCD_D17__LCD_D17
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_16bit_pins_a: lcdif-16bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D00__LCD_D0
+ MX28_PAD_LCD_D01__LCD_D1
+ MX28_PAD_LCD_D02__LCD_D2
+ MX28_PAD_LCD_D03__LCD_D3
+ MX28_PAD_LCD_D04__LCD_D4
+ MX28_PAD_LCD_D05__LCD_D5
+ MX28_PAD_LCD_D06__LCD_D6
+ MX28_PAD_LCD_D07__LCD_D7
+ MX28_PAD_LCD_D08__LCD_D8
+ MX28_PAD_LCD_D09__LCD_D9
+ MX28_PAD_LCD_D10__LCD_D10
+ MX28_PAD_LCD_D11__LCD_D11
+ MX28_PAD_LCD_D12__LCD_D12
+ MX28_PAD_LCD_D13__LCD_D13
+ MX28_PAD_LCD_D14__LCD_D14
+ MX28_PAD_LCD_D15__LCD_D15
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_sync_pins_a: lcdif-sync@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_RS__LCD_DOTCLK
+ MX28_PAD_LCD_CS__LCD_ENABLE
+ MX28_PAD_LCD_RD_E__LCD_VSYNC
+ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ can0_pins_a: can0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_RDY2__CAN0_TX
+ MX28_PAD_GPMI_RDY3__CAN0_RX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ can1_pins_a: can1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_CE2N__CAN1_TX
+ MX28_PAD_GPMI_CE3N__CAN1_RX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ spi2_pins_a: spi2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ MX28_PAD_SSP2_MOSI__SSP2_CMD
+ MX28_PAD_SSP2_MISO__SSP2_D0
+ MX28_PAD_SSP2_SS0__SSP2_D3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ spi3_pins_a: spi3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__SSP3_D4
+ MX28_PAD_AUART2_TX__SSP3_D5
+ MX28_PAD_SSP3_SCK__SSP3_SCK
+ MX28_PAD_SSP3_MOSI__SSP3_CMD
+ MX28_PAD_SSP3_MISO__SSP3_D0
+ MX28_PAD_SSP3_SS0__SSP3_D3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ spi3_pins_b: spi3@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP3_SCK__SSP3_SCK
+ MX28_PAD_SSP3_MOSI__SSP3_CMD
+ MX28_PAD_SSP3_MISO__SSP3_D0
+ MX28_PAD_SSP3_SS0__SSP3_D3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ usb0_pins_a: usb0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ usb0_pins_b: usb0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ usb1_pins_a: usb1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ usb0_id_pins_a: usb0id@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RTS__USB0_ID
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ usb0_id_pins_b: usb0id1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__USB0_ID
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ };
+
+ digctl: digctl@8001c000 {
+ compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+ reg = <0x8001c000 0x2000>;
+ interrupts = <89>;
+ status = "disabled";
+ };
+
+ etm: etm@80022000 {
+ reg = <0x80022000 0x2000>;
+ status = "disabled";
+ };
+
+ dma_apbx: dma-apbx@80024000 {
+ compatible = "fsl,imx28-dma-apbx";
+ reg = <0x80024000 0x2000>;
+ interrupts = <78 79 66 0
+ 80 81 68 69
+ 70 71 72 73
+ 74 75 76 77>;
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
+ "saif0", "saif1", "i2c0", "i2c1",
+ "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+ "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ clocks = <&clks 26>;
+ };
+
+ dcp: dcp@80028000 {
+ compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+ reg = <0x80028000 0x2000>;
+ interrupts = <52 53 54>;
+ status = "okay";
+ };
+
+ pxp: pxp@8002a000 {
+ reg = <0x8002a000 0x2000>;
+ interrupts = <39>;
+ status = "disabled";
+ };
+
+ ocotp: ocotp@8002c000 {
+ compatible = "fsl,ocotp";
+ reg = <0x8002c000 0x2000>;
+ status = "disabled";
+ };
+
+ axi-ahb@8002e000 {
+ reg = <0x8002e000 0x2000>;
+ status = "disabled";
+ };
+
+ lcdif: lcdif@80030000 {
+ compatible = "fsl,imx28-lcdif";
+ reg = <0x80030000 0x2000>;
+ interrupts = <38>;
+ clocks = <&clks 55>;
+ dmas = <&dma_apbh 13>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ can0: can@80032000 {
+ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+ reg = <0x80032000 0x2000>;
+ interrupts = <8>;
+ clocks = <&clks 58>, <&clks 58>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can1: can@80034000 {
+ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+ reg = <0x80034000 0x2000>;
+ interrupts = <9>;
+ clocks = <&clks 59>, <&clks 59>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ simdbg: simdbg@8003c000 {
+ reg = <0x8003c000 0x200>;
+ status = "disabled";
+ };
+
+ simgpmisel: simgpmisel@8003c200 {
+ reg = <0x8003c200 0x100>;
+ status = "disabled";
+ };
+
+ simsspsel: simsspsel@8003c300 {
+ reg = <0x8003c300 0x100>;
+ status = "disabled";
+ };
+
+ simmemsel: simmemsel@8003c400 {
+ reg = <0x8003c400 0x100>;
+ status = "disabled";
+ };
+
+ gpiomon: gpiomon@8003c500 {
+ reg = <0x8003c500 0x100>;
+ status = "disabled";
+ };
+
+ simenet: simenet@8003c700 {
+ reg = <0x8003c700 0x100>;
+ status = "disabled";
+ };
+
+ armjtag: armjtag@8003c800 {
+ reg = <0x8003c800 0x100>;
+ status = "disabled";
+ };
+ };
+
+ apbx@80040000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80040000 0x40000>;
+ ranges;
+
+ clks: clkctrl@80040000 {
+ compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ saif0: saif@80042000 {
+ compatible = "fsl,imx28-saif";
+ reg = <0x80042000 0x2000>;
+ interrupts = <59>;
+ #clock-cells = <0>;
+ clocks = <&clks 53>;
+ dmas = <&dma_apbx 4>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ power: power@80044000 {
+ reg = <0x80044000 0x2000>;
+ status = "disabled";
+ };
+
+ saif1: saif@80046000 {
+ compatible = "fsl,imx28-saif";
+ reg = <0x80046000 0x2000>;
+ interrupts = <58>;
+ clocks = <&clks 54>;
+ dmas = <&dma_apbx 5>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ lradc: lradc@80050000 {
+ compatible = "fsl,imx28-lradc";
+ reg = <0x80050000 0x2000>;
+ interrupts = <10 14 15 16 17 18 19
+ 20 21 22 23 24 25>;
+ status = "disabled";
+ clocks = <&clks 41>;
+ #io-channel-cells = <1>;
+ };
+
+ spdif: spdif@80054000 {
+ reg = <0x80054000 0x2000>;
+ interrupts = <45>;
+ dmas = <&dma_apbx 2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
+ mxs_rtc: rtc@80056000 {
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+ reg = <0x80056000 0x2000>;
+ interrupts = <29>;
+ };
+
+ i2c0: i2c@80058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-i2c";
+ reg = <0x80058000 0x2000>;
+ interrupts = <111>;
+ clock-frequency = <100000>;
+ dmas = <&dma_apbx 6>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ i2c1: i2c@8005a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-i2c";
+ reg = <0x8005a000 0x2000>;
+ interrupts = <110>;
+ clock-frequency = <100000>;
+ dmas = <&dma_apbx 7>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ pwm: pwm@80064000 {
+ compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+ reg = <0x80064000 0x2000>;
+ clocks = <&clks 44>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <8>;
+ status = "disabled";
+ };
+
+ timer: timrot@80068000 {
+ compatible = "fsl,imx28-timrot", "fsl,timrot";
+ reg = <0x80068000 0x2000>;
+ interrupts = <48 49 50 51>;
+ clocks = <&clks 26>;
+ };
+
+ auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ auart1: serial@8006c000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006c000 0x2000>;
+ interrupts = <113>;
+ dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ auart2: serial@8006e000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006e000 0x2000>;
+ interrupts = <114>;
+ dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ auart3: serial@80070000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x80070000 0x2000>;
+ interrupts = <115>;
+ dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ auart4: serial@80072000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x80072000 0x2000>;
+ interrupts = <116>;
+ dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ duart: serial@80074000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80074000 0x1000>;
+ interrupts = <47>;
+ clocks = <&clks 45>, <&clks 26>;
+ clock-names = "uart", "apb_pclk";
+ status = "disabled";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+ reg = <0x8007c000 0x2000>;
+ clocks = <&clks 62>;
+ status = "disabled";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+ reg = <0x8007e000 0x2000>;
+ clocks = <&clks 63>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80080000 0x80000>;
+ ranges;
+
+ usb0: usb@80080000 {
+ compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+ reg = <0x80080000 0x10000>;
+ interrupts = <93>;
+ clocks = <&clks 60>;
+ fsl,usbphy = <&usbphy0>;
+ status = "disabled";
+ };
+
+ usb1: usb@80090000 {
+ compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+ reg = <0x80090000 0x10000>;
+ interrupts = <92>;
+ clocks = <&clks 61>;
+ fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ dflpt: dflpt@800c0000 {
+ reg = <0x800c0000 0x10000>;
+ status = "disabled";
+ };
+
+ mac0: ethernet@800f0000 {
+ compatible = "fsl,imx28-fec";
+ reg = <0x800f0000 0x4000>;
+ interrupts = <101>;
+ clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+ clock-names = "ipg", "ahb", "enet_out";
+ status = "disabled";
+ };
+
+ mac1: ethernet@800f4000 {
+ compatible = "fsl,imx28-fec";
+ reg = <0x800f4000 0x4000>;
+ interrupts = <102>;
+ clocks = <&clks 57>, <&clks 57>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
+
+ etn_switch: switch@800f8000 {
+ reg = <0x800f8000 0x8000>;
+ status = "disabled";
+ };
+ };
+
+ iio_hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&lradc 8>;
+ };
+};