1 files changed, 159 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
new file mode 100644
index 000000000..2075a2e82
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -0,0 +1,159 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "ZyXEL NSA310";
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+		read-only;
+	};
+	partition@100000 {
+		label = "uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};