summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi')
-rw-r--r--arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi105
1 files changed, 105 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
new file mode 100644
index 000000000..7196c7f3e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -0,0 +1,105 @@
+/*
+ * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+
+ pmx_usb_power_enable: pmx-usb-power-enable {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_led_red: pmx-led-red {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_led_blue: pmx-led-blue {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_sdio_wp: pmx-sdio-wp {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+ serial@12000 {
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_enable>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 29 0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ };
+
+ partition@100000 {
+ label = "uImage";
+ reg = <0x0100000 0x400000>;
+ };
+
+ partition@500000 {
+ label = "root";
+ reg = <0x0500000 0x1fb00000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <&ethphy0>;
+ };
+};