diff options
Diffstat (limited to 'arch/arm/boot/dts/lpc32xx.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/lpc32xx.dtsi | 142 |
1 files changed, 105 insertions, 37 deletions
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 3abebb75f..c85cf9797 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -11,19 +11,20 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0x0>; }; }; @@ -31,7 +32,8 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - ranges = <0x20000000 0x20000000 0x30000000>; + ranges = <0x20000000 0x20000000 0x30000000>, + <0xe0000000 0xe0000000 0x04000000>; /* * Enable either SLC or MLC @@ -49,30 +51,46 @@ status = "disabled"; }; - dma@31000000 { + dma: dma@31000000 { compatible = "arm,pl080", "arm,primecell"; reg = <0x31000000 0x1000>; interrupts = <0x1c 0>; }; - /* - * Enable either ohci or usbd (gadget)! - */ - ohci@31020000 { - compatible = "nxp,ohci-nxp", "usb-ohci"; - reg = <0x31020000 0x300>; - interrupts = <0x3b 0>; - status = "disabled"; - }; + usb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x31020000 0x00001000>; - usbd@31020000 { - compatible = "nxp,lpc3220-udc"; - reg = <0x31020000 0x300>; - interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; - status = "disabled"; + /* + * Enable either ohci or usbd (gadget)! + */ + ohci: ohci@0 { + compatible = "nxp,ohci-nxp", "usb-ohci"; + reg = <0x0 0x300>; + interrupts = <0x3b 0>; + status = "disabled"; + }; + + usbd: usbd@0 { + compatible = "nxp,lpc3220-udc"; + reg = <0x0 0x300>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + status = "disabled"; + }; + + i2cusb: i2c@300 { + compatible = "nxp,pnx-i2c"; + reg = <0x300 0x100>; + interrupts = <0x3f 0>; + #address-cells = <1>; + #size-cells = <0>; + pnx,timeout = <0x64>; + }; }; - clcd@31040000 { + clcd: clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <0x0e 0>; @@ -85,6 +103,19 @@ interrupts = <0x1d 0>; }; + emc: memory-controller@31080000 { + compatible = "arm,pl175", "arm,primecell"; + reg = <0x31080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe0000000 0x01000000>, + <1 0xe1000000 0x01000000>, + <2 0xe2000000 0x01000000>, + <3 0xe3000000 0x01000000>; + status = "disabled"; + }; + apb { #address-cells = <1>; #size-cells = <1>; @@ -118,7 +149,7 @@ reg = <0x20094000 0x1000>; }; - sd@20098000 { + sd: sd@20098000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; interrupts = <0x0f 0>, <0x0d 0>; @@ -192,15 +223,6 @@ status = "disabled"; #pwm-cells = <2>; }; - - i2cusb: i2c@31020300 { - compatible = "nxp,pnx-i2c"; - reg = <0x31020300 0x100>; - interrupts = <0x3f 0>; - #address-cells = <1>; - #size-cells = <0>; - pnx,timeout = <0x64>; - }; }; fab { @@ -243,7 +265,7 @@ status = "disabled"; }; - rtc@40024000 { + rtc: rtc@40024000 { compatible = "nxp,lpc3220-rtc"; reg = <0x40024000 0x1000>; interrupts = <0x34 0>; @@ -256,11 +278,31 @@ #gpio-cells = <3>; /* bank, pin, flags */ }; - watchdog@4003C000 { + timer4: timer@4002C000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4002C000 0x1000>; + interrupts = <0x3 0>; + status = "disabled"; + }; + + timer5: timer@40030000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40030000 0x1000>; + interrupts = <0x4 0>; + status = "disabled"; + }; + + watchdog: watchdog@4003C000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; }; + timer0: timer@40044000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40044000 0x1000>; + interrupts = <0x10 0>; + }; + /* * TSC vs. ADC: Since those two share the same * hardware, you need to choose from one of the @@ -268,30 +310,56 @@ * them */ - adc@40048000 { + adc: adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; status = "disabled"; }; - tsc@40048000 { + tsc: tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; status = "disabled"; }; - key@40050000 { + timer1: timer@4004C000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4004C000 0x1000>; + interrupts = <0x11 0>; + }; + + key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; interrupts = <54 0>; status = "disabled"; }; - pwm: pwm@4005C000 { + timer2: timer@40058000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40058000 0x1000>; + interrupts = <0x12 0>; + status = "disabled"; + }; + + pwm1: pwm@4005C000 { compatible = "nxp,lpc3220-pwm"; - reg = <0x4005C000 0x8>; + reg = <0x4005C000 0x4>; + status = "disabled"; + }; + + pwm2: pwm@4005C004 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005C004 0x4>; + status = "disabled"; + }; + + timer3: timer@40060000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40060000 0x1000>; + interrupts = <0x13 0>; status = "disabled"; }; }; |