summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/omap3-cm-t3x30.dtsi')
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3x30.dtsi130
1 files changed, 130 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
new file mode 100644
index 000000000..046cd7733
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -0,0 +1,130 @@
+/*
+ * Common support for CompuLab CM-T3x30 CoMs
+ */
+
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "cm-t35";
+
+ ti,mcbsp = <&mcbsp2>;
+ };
+};
+
+&omap3_pmx_core {
+
+ smsc1_pins: pinmux_smsc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
+ >;
+ };
+
+ hsusb0_pins: pinmux_hsusb0_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ >;
+ };
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
+
+ smsc1: ethernet@gpmc {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc1_pins>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ reg = <5 0 0xff>;
+ };
+};
+
+&i2c1 {
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include <dt-bindings/input/input.h>
+
+&venc {
+ vdda-supply = <&vdac>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(0) */
+ ti,pullups = <0x000001>;
+};
+
+&twl_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x01, KEY_A)
+ MATRIX_KEY(0x00, 0x02, KEY_B)
+ MATRIX_KEY(0x00, 0x03, KEY_LEFT)
+
+ MATRIX_KEY(0x01, 0x01, KEY_UP)
+ MATRIX_KEY(0x01, 0x02, KEY_ENTER)
+ MATRIX_KEY(0x01, 0x03, KEY_DOWN)
+
+ MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
+ MATRIX_KEY(0x02, 0x02, KEY_C)
+ MATRIX_KEY(0x02, 0x03, KEY_D)
+ >;
+};
+
+&hsusb1_phy {
+ reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+ reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb0_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};