diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3-igep0030-rev-g.dts')
| -rw-r--r-- | arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts new file mode 100644 index 000000000..b899e3418 --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -0,0 +1,76 @@ +/* + * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) + * + * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-igep0030-common.dtsi" + +/ { + model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; + + /* Regulator to trigger the WL_EN signal of the Wifi module */ + lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { + compatible = "regulator-fixed"; + regulator-name = "regulator-lbep5clwmc-wlen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */ + enable-active-high; + }; +}; + +&omap3_pmx_core { + lbep5clwmc_pins: pinmux_lbep5clwmc_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */ + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */ + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */ + >; + }; + +}; + +&i2c2 { + status = "disabled"; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins &leds_core2_pins>; + + boot { + label = "omap3:green:boot"; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>; + vmmc-supply = <&lbep5clwmc_wlen>; + bus-width = <4>; + non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + }; +}; |