summaryrefslogtreecommitdiff
path: root/arch/arm/common/edma.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/common/edma.c')
-rw-r--r--arch/arm/common/edma.c1873
1 files changed, 1873 insertions, 0 deletions
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
new file mode 100644
index 000000000..5662a8726
--- /dev/null
+++ b/arch/arm/common/edma.c
@@ -0,0 +1,1873 @@
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/edma.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/of_irq.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/platform_data/edma.h>
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT 0x00
+#define PARM_SRC 0x04
+#define PARM_A_B_CNT 0x08
+#define PARM_DST 0x0c
+#define PARM_SRC_DST_BIDX 0x10
+#define PARM_LINK_BCNTRLD 0x14
+#define PARM_SRC_DST_CIDX 0x18
+#define PARM_CCNT 0x1c
+
+#define PARM_SIZE 0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER 0x00 /* 64 bits */
+#define SH_ECR 0x08 /* 64 bits */
+#define SH_ESR 0x10 /* 64 bits */
+#define SH_CER 0x18 /* 64 bits */
+#define SH_EER 0x20 /* 64 bits */
+#define SH_EECR 0x28 /* 64 bits */
+#define SH_EESR 0x30 /* 64 bits */
+#define SH_SER 0x38 /* 64 bits */
+#define SH_SECR 0x40 /* 64 bits */
+#define SH_IER 0x50 /* 64 bits */
+#define SH_IECR 0x58 /* 64 bits */
+#define SH_IESR 0x60 /* 64 bits */
+#define SH_IPR 0x68 /* 64 bits */
+#define SH_ICR 0x70 /* 64 bits */
+#define SH_IEVAL 0x78
+#define SH_QER 0x80
+#define SH_QEER 0x84
+#define SH_QEECR 0x88
+#define SH_QEESR 0x8c
+#define SH_QSER 0x90
+#define SH_QSECR 0x94
+#define SH_SIZE 0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV 0x0000
+#define EDMA_CCCFG 0x0004
+#define EDMA_QCHMAP 0x0200 /* 8 registers */
+#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM 0x0260
+#define EDMA_QUETCMAP 0x0280
+#define EDMA_QUEPRI 0x0284
+#define EDMA_EMR 0x0300 /* 64 bits */
+#define EDMA_EMCR 0x0308 /* 64 bits */
+#define EDMA_QEMR 0x0310
+#define EDMA_QEMCR 0x0314
+#define EDMA_CCERR 0x0318
+#define EDMA_CCERRCLR 0x031c
+#define EDMA_EEVAL 0x0320
+#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/
+#define EDMA_QRAE 0x0380 /* 4 registers */
+#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */
+#define EDMA_QSTAT 0x0600 /* 2 registers */
+#define EDMA_QWMTHRA 0x0620
+#define EDMA_QWMTHRB 0x0624
+#define EDMA_CCSTAT 0x0640
+
+#define EDMA_M 0x1000 /* global channel registers */
+#define EDMA_ECR 0x1008
+#define EDMA_ECRH 0x100C
+#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */
+#define EDMA_PARM 0x4000 /* 128 param entries */
+
+#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_DCHMAP 0x0100 /* 64 registers */
+
+/* CCCFG register */
+#define GET_NUM_DMACH(x) (x & 0x7) /* bits 0-2 */
+#define GET_NUM_PAENTRY(x) ((x & 0x7000) >> 12) /* bits 12-14 */
+#define GET_NUM_EVQUE(x) ((x & 0x70000) >> 16) /* bits 16-18 */
+#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */
+#define CHMAP_EXIST BIT(24)
+
+#define EDMA_MAX_DMACH 64
+#define EDMA_MAX_PARAMENTRY 512
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
+
+static inline unsigned int edma_read(unsigned ctlr, int offset)
+{
+ return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
+}
+
+static inline void edma_write(unsigned ctlr, int offset, int val)
+{
+ __raw_writel(val, edmacc_regs_base[ctlr] + offset);
+}
+static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
+ unsigned or)
+{
+ unsigned val = edma_read(ctlr, offset);
+ val &= and;
+ val |= or;
+ edma_write(ctlr, offset, val);
+}
+static inline void edma_and(unsigned ctlr, int offset, unsigned and)
+{
+ unsigned val = edma_read(ctlr, offset);
+ val &= and;
+ edma_write(ctlr, offset, val);
+}
+static inline void edma_or(unsigned ctlr, int offset, unsigned or)
+{
+ unsigned val = edma_read(ctlr, offset);
+ val |= or;
+ edma_write(ctlr, offset, val);
+}
+static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
+{
+ return edma_read(ctlr, offset + (i << 2));
+}
+static inline void edma_write_array(unsigned ctlr, int offset, int i,
+ unsigned val)
+{
+ edma_write(ctlr, offset + (i << 2), val);
+}
+static inline void edma_modify_array(unsigned ctlr, int offset, int i,
+ unsigned and, unsigned or)
+{
+ edma_modify(ctlr, offset + (i << 2), and, or);
+}
+static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
+{
+ edma_or(ctlr, offset + (i << 2), or);
+}
+static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
+ unsigned or)
+{
+ edma_or(ctlr, offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
+ unsigned val)
+{
+ edma_write(ctlr, offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
+{
+ return edma_read(ctlr, EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
+ int i)
+{
+ return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
+{
+ edma_write(ctlr, EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
+ unsigned val)
+{
+ edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
+ int param_no)
+{
+ return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
+ unsigned val)
+{
+ edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
+ unsigned and, unsigned or)
+{
+ edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
+ unsigned and)
+{
+ edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
+ unsigned or)
+{
+ edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
+}
+
+static inline void set_bits(int offset, int len, unsigned long *p)
+{
+ for (; len > 0; len--)
+ set_bit(offset + (len - 1), p);
+}
+
+static inline void clear_bits(int offset, int len, unsigned long *p)
+{
+ for (; len > 0; len--)
+ clear_bit(offset + (len - 1), p);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+struct edma {
+ /* how many dma resources of each type */
+ unsigned num_channels;
+ unsigned num_region;
+ unsigned num_slots;
+ unsigned num_tc;
+ enum dma_event_q default_queue;
+
+ /* list of channels with no even trigger; terminated by "-1" */
+ const s8 *noevent;
+
+ struct edma_soc_info *info;
+
+ /* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+ DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+ /* The edma_unused bit for each channel is clear unless
+ * it is not being used on this platform. It uses a bit
+ * of SOC-specific initialization code.
+ */
+ DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
+
+ unsigned irq_res_start;
+ unsigned irq_res_end;
+
+ struct dma_interrupt_data {
+ void (*callback)(unsigned channel, unsigned short ch_status,
+ void *data);
+ void *data;
+ } intr_data[EDMA_MAX_DMACH];
+};
+
+static struct edma *edma_cc[EDMA_MAX_CC];
+static int arch_num_cc;
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+ .link_bcntrld = 0xffff,
+ .ccnt = 1,
+};
+
+static const struct of_device_id edma_of_ids[] = {
+ { .compatible = "ti,edma3", },
+ {}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
+ enum dma_event_q queue_no)
+{
+ int bit = (ch_no & 0x7) * 4;
+
+ /* default to low priority queue */
+ if (queue_no == EVENTQ_DEFAULT)
+ queue_no = edma_cc[ctlr]->default_queue;
+
+ queue_no &= 7;
+ edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
+ ~(0x7 << bit), queue_no << bit);
+}
+
+static void assign_priority_to_queue(unsigned ctlr, int queue_no,
+ int priority)
+{
+ int bit = queue_no * 4;
+ edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
+ ((priority & 0x7) << bit));
+}
+
+/**
+ * map_dmach_param - Maps channel number to param entry number
+ *
+ * This maps the dma channel number to param entry numberter. In
+ * other words using the DMA channel mapping registers a param entry
+ * can be mapped to any channel
+ *
+ * Callers are responsible for ensuring the channel mapping logic is
+ * included in that particular EDMA variant (Eg : dm646x)
+ *
+ */
+static void map_dmach_param(unsigned ctlr)
+{
+ int i;
+ for (i = 0; i < EDMA_MAX_DMACH; i++)
+ edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(lch);
+ lch = EDMA_CHAN_SLOT(lch);
+
+ if (!callback)
+ edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
+ BIT(lch & 0x1f));
+
+ edma_cc[ctlr]->intr_data[lch].callback = callback;
+ edma_cc[ctlr]->intr_data[lch].data = data;
+
+ if (callback) {
+ edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
+ BIT(lch & 0x1f));
+ edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
+ BIT(lch & 0x1f));
+ }
+}
+
+static int irq2ctlr(int irq)
+{
+ if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
+ return 0;
+ else if (irq >= edma_cc[1]->irq_res_start &&
+ irq <= edma_cc[1]->irq_res_end)
+ return 1;
+
+ return -1;
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+ int ctlr;
+ u32 sh_ier;
+ u32 sh_ipr;
+ u32 bank;
+
+ ctlr = irq2ctlr(irq);
+ if (ctlr < 0)
+ return IRQ_NONE;
+
+ dev_dbg(data, "dma_irq_handler\n");
+
+ sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
+ if (!sh_ipr) {
+ sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
+ if (!sh_ipr)
+ return IRQ_NONE;
+ sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
+ bank = 1;
+ } else {
+ sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
+ bank = 0;
+ }
+
+ do {
+ u32 slot;
+ u32 channel;
+
+ dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
+
+ slot = __ffs(sh_ipr);
+ sh_ipr &= ~(BIT(slot));
+
+ if (sh_ier & BIT(slot)) {
+ channel = (bank << 5) | slot;
+ /* Clear the corresponding IPR bits */
+ edma_shadow0_write_array(ctlr, SH_ICR, bank,
+ BIT(slot));
+ if (edma_cc[ctlr]->intr_data[channel].callback)
+ edma_cc[ctlr]->intr_data[channel].callback(
+ channel, EDMA_DMA_COMPLETE,
+ edma_cc[ctlr]->intr_data[channel].data);
+ }
+ } while (sh_ipr);
+
+ edma_shadow0_write(ctlr, SH_IEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+ int i;
+ int ctlr;
+ unsigned int cnt = 0;
+
+ ctlr = irq2ctlr(irq);
+ if (ctlr < 0)
+ return IRQ_NONE;
+
+ dev_dbg(data, "dma_ccerr_handler\n");
+
+ if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
+ (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
+ (edma_read(ctlr, EDMA_QEMR) == 0) &&
+ (edma_read(ctlr, EDMA_CCERR) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j = -1;
+ if (edma_read_array(ctlr, EDMA_EMR, 0))
+ j = 0;
+ else if (edma_read_array(ctlr, EDMA_EMR, 1))
+ j = 1;
+ if (j >= 0) {
+ dev_dbg(data, "EMR%d %08x\n", j,
+ edma_read_array(ctlr, EDMA_EMR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_read_array(ctlr, EDMA_EMR, j) &
+ BIT(i)) {
+ /* Clear the corresponding EMR bits */
+ edma_write_array(ctlr, EDMA_EMCR, j,
+ BIT(i));
+ /* Clear any SER */
+ edma_shadow0_write_array(ctlr, SH_SECR,
+ j, BIT(i));
+ if (edma_cc[ctlr]->intr_data[k].
+ callback) {
+ edma_cc[ctlr]->intr_data[k].
+ callback(k,
+ EDMA_DMA_CC_ERROR,
+ edma_cc[ctlr]->intr_data
+ [k].data);
+ }
+ }
+ }
+ } else if (edma_read(ctlr, EDMA_QEMR)) {
+ dev_dbg(data, "QEMR %02x\n",
+ edma_read(ctlr, EDMA_QEMR));
+ for (i = 0; i < 8; i++) {
+ if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(ctlr, EDMA_QEMCR, BIT(i));
+ edma_shadow0_write(ctlr, SH_QSECR,
+ BIT(i));
+
+ /* NOTE: not reported!! */
+ }
+ }
+ } else if (edma_read(ctlr, EDMA_CCERR)) {
+ dev_dbg(data, "CCERR %08x\n",
+ edma_read(ctlr, EDMA_CCERR));
+ /* FIXME: CCERR.BIT(16) ignored! much better
+ * to just write CCERRCLR with CCERR value...
+ */
+ for (i = 0; i < 8; i++) {
+ if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
+
+ /* NOTE: not reported!! */
+ }
+ }
+ }
+ if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
+ (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
+ (edma_read(ctlr, EDMA_QEMR) == 0) &&
+ (edma_read(ctlr, EDMA_CCERR) == 0))
+ break;
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_write(ctlr, EDMA_EEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+static int reserve_contiguous_slots(int ctlr, unsigned int id,
+ unsigned int num_slots,
+ unsigned int start_slot)
+{
+ int i, j;
+ unsigned int count = num_slots;
+ int stop_slot = start_slot;
+ DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
+
+ for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
+ j = EDMA_CHAN_SLOT(i);
+ if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
+ /* Record our current beginning slot */
+ if (count == num_slots)
+ stop_slot = i;
+
+ count--;
+ set_bit(j, tmp_inuse);
+
+ if (count == 0)
+ break;
+ } else {
+ clear_bit(j, tmp_inuse);
+
+ if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
+ stop_slot = i;
+ break;
+ } else {
+ count = num_slots;
+ }
+ }
+ }
+
+ /*
+ * We have to clear any bits that we set
+ * if we run out parameter RAM slots, i.e we do find a set
+ * of contiguous parameter RAM slots but do not find the exact number
+ * requested as we may reach the total number of parameter RAM slots
+ */
+ if (i == edma_cc[ctlr]->num_slots)
+ stop_slot = i;
+
+ j = start_slot;
+ for_each_set_bit_from(j, tmp_inuse, stop_slot)
+ clear_bit(j, edma_cc[ctlr]->edma_inuse);
+
+ if (count)
+ return -EBUSY;
+
+ for (j = i - num_slots + 1; j <= i; ++j)
+ memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
+ &dummy_paramset, PARM_SIZE);
+
+ return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
+}
+
+static int prepare_unused_channel_list(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int i, count, ctlr;
+ struct of_phandle_args dma_spec;
+
+ if (dev->of_node) {
+ count = of_property_count_strings(dev->of_node, "dma-names");
+ if (count < 0)
+ return 0;
+ for (i = 0; i < count; i++) {
+ if (of_parse_phandle_with_args(dev->of_node, "dmas",
+ "#dma-cells", i,
+ &dma_spec))
+ continue;
+
+ if (!of_match_node(edma_of_ids, dma_spec.np)) {
+ of_node_put(dma_spec.np);
+ continue;
+ }
+
+ clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
+ edma_cc[0]->edma_unused);
+ of_node_put(dma_spec.np);
+ }
+ return 0;
+ }
+
+ /* For non-OF case */
+ for (i = 0; i < pdev->num_resources; i++) {
+ if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
+ (int)pdev->resource[i].start >= 0) {
+ ctlr = EDMA_CTLR(pdev->resource[i].start);
+ clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
+ edma_cc[ctlr]->edma_unused);
+ }
+ }
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------*/
+
+static bool unused_chan_list_done;
+
+/* Resource alloc/free: dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ * Controller (TC) executes requests using this channel. Use
+ * EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel. When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining. When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set. Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data,
+ enum dma_event_q eventq_no)
+{
+ unsigned i, done = 0, ctlr = 0;
+ int ret = 0;
+
+ if (!unused_chan_list_done) {
+ /*
+ * Scan all the platform devices to find out the EDMA channels
+ * used and clear them in the unused list, making the rest
+ * available for ARM usage.
+ */
+ ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
+ prepare_unused_channel_list);
+ if (ret < 0)
+ return ret;
+
+ unused_chan_list_done = true;
+ }
+
+ if (channel >= 0) {
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+ }
+
+ if (channel < 0) {
+ for (i = 0; i < arch_num_cc; i++) {
+ channel = 0;
+ for (;;) {
+ channel = find_next_bit(edma_cc[i]->edma_unused,
+ edma_cc[i]->num_channels,
+ channel);
+ if (channel == edma_cc[i]->num_channels)
+ break;
+ if (!test_and_set_bit(channel,
+ edma_cc[i]->edma_inuse)) {
+ done = 1;
+ ctlr = i;
+ break;
+ }
+ channel++;
+ }
+ if (done)
+ break;
+ }
+ if (!done)
+ return -ENOMEM;
+ } else if (channel >= edma_cc[ctlr]->num_channels) {
+ return -EINVAL;
+ } else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
+ return -EBUSY;
+ }
+
+ /* ensure access through shadow region 0 */
+ edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
+
+ /* ensure no events are pending */
+ edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
+ memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+
+ if (callback)
+ setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
+ callback, data);
+
+ map_dmach_queue(ctlr, channel, eventq_no);
+
+ return EDMA_CTLR_CHAN(ctlr, channel);
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel >= edma_cc[ctlr]->num_channels)
+ return;
+
+ setup_dma_interrupt(channel, NULL, NULL);
+ /* REVISIT should probably take out of shadow region 0 */
+
+ memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(channel, edma_cc[ctlr]->edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer. Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(unsigned ctlr, int slot)
+{
+ if (!edma_cc[ctlr])
+ return -EINVAL;
+
+ if (slot >= 0)
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot < 0) {
+ slot = edma_cc[ctlr]->num_channels;
+ for (;;) {
+ slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
+ edma_cc[ctlr]->num_slots, slot);
+ if (slot == edma_cc[ctlr]->num_slots)
+ return -ENOMEM;
+ if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
+ break;
+ }
+ } else if (slot < edma_cc[ctlr]->num_channels ||
+ slot >= edma_cc[ctlr]->num_slots) {
+ return -EINVAL;
+ } else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
+ return -EBUSY;
+ }
+
+ memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+
+ return EDMA_CTLR_CHAN(ctlr, slot);
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot < edma_cc[ctlr]->num_channels ||
+ slot >= edma_cc[ctlr]->num_slots)
+ return;
+
+ memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(slot, edma_cc[ctlr]->edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+
+/**
+ * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
+ * The API will return the starting point of a set of
+ * contiguous parameter RAM slots that have been requested
+ *
+ * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
+ * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ * @count: number of contiguous Paramter RAM slots
+ * @slot - the start value of Parameter RAM slot that should be passed if id
+ * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ *
+ * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
+ * contiguous Parameter RAM slots from parameter RAM 64 in the case of
+ * DaVinci SOCs and 32 in the case of DA8xx SOCs.
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
+ * set of contiguous parameter RAM slots from the "slot" that is passed as an
+ * argument to the API.
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
+ * starts looking for a set of contiguous parameter RAMs from the "slot"
+ * that is passed as an argument to the API. On failure the API will try to
+ * find a set of contiguous Parameter RAM slots from the remaining Parameter
+ * RAM slots
+ */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
+{
+ /*
+ * The start slot requested should be greater than
+ * the number of channels and lesser than the total number
+ * of slots
+ */
+ if ((id != EDMA_CONT_PARAMS_ANY) &&
+ (slot < edma_cc[ctlr]->num_channels ||
+ slot >= edma_cc[ctlr]->num_slots))
+ return -EINVAL;
+
+ /*
+ * The number of parameter RAM slots requested cannot be less than 1
+ * and cannot be more than the number of slots minus the number of
+ * channels
+ */
+ if (count < 1 || count >
+ (edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
+ return -EINVAL;
+
+ switch (id) {
+ case EDMA_CONT_PARAMS_ANY:
+ return reserve_contiguous_slots(ctlr, id, count,
+ edma_cc[ctlr]->num_channels);
+ case EDMA_CONT_PARAMS_FIXED_EXACT:
+ case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
+ return reserve_contiguous_slots(ctlr, id, count, slot);
+ default:
+ return -EINVAL;
+ }
+
+}
+EXPORT_SYMBOL(edma_alloc_cont_slots);
+
+/**
+ * edma_free_cont_slots - deallocate DMA parameter RAM slots
+ * @slot: first parameter RAM of a set of parameter RAM slots to be freed
+ * @count: the number of contiguous parameter RAM slots to be freed
+ *
+ * This deallocates the parameter RAM slots allocated by
+ * edma_alloc_cont_slots.
+ * Callers/applications need to keep track of sets of contiguous
+ * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
+ * API.
+ * Callers are responsible for ensuring the slots are inactive, and will
+ * not be activated.
+ */
+int edma_free_cont_slots(unsigned slot, int count)
+{
+ unsigned ctlr, slot_to_free;
+ int i;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot < edma_cc[ctlr]->num_channels ||
+ slot >= edma_cc[ctlr]->num_slots ||
+ count < 1)
+ return -EINVAL;
+
+ for (i = slot; i < slot + count; ++i) {
+ ctlr = EDMA_CTLR(i);
+ slot_to_free = EDMA_CHAN_SLOT(i);
+
+ memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(edma_free_cont_slots);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot < edma_cc[ctlr]->num_slots) {
+ unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
+
+ if (mode) {
+ /* set SAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+ } else {
+ /* clear SAM */
+ i &= ~SAM;
+ }
+ edma_parm_write(ctlr, PARM_OPT, slot, i);
+
+ /* set the source port address
+ in source register of param structure */
+ edma_parm_write(ctlr, PARM_SRC, slot, src_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot < edma_cc[ctlr]->num_slots) {
+ unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
+
+ if (mode) {
+ /* set DAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+ } else {
+ /* clear DAM */
+ i &= ~DAM;
+ }
+ edma_parm_write(ctlr, PARM_OPT, slot, i);
+ /* set the destination port address
+ in dest register of param structure */
+ edma_parm_write(ctlr, PARM_DST, slot, dest_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer point
+ * @slot: parameter RAM slot being examined
+ * @dst: true selects the dest position, false the source
+ *
+ * Returns the position of the current active slot
+ */
+dma_addr_t edma_get_position(unsigned slot, bool dst)
+{
+ u32 offs, ctlr = EDMA_CTLR(slot);
+
+ slot = EDMA_CHAN_SLOT(slot);
+
+ offs = PARM_OFFSET(slot);
+ offs += dst ? PARM_DST : PARM_SRC;
+
+ return edma_read(ctlr, offs);
+}
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot < edma_cc[ctlr]->num_slots) {
+ edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
+ 0xffff0000, src_bidx);
+ edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
+ 0xffff0000, src_cidx);
+ }
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot < edma_cc[ctlr]->num_slots) {
+ edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
+ 0x0000ffff, dest_bidx << 16);
+ edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
+ 0x0000ffff, dest_cidx << 16);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ * the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots. If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register. In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO. It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+ u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot < edma_cc[ctlr]->num_slots) {
+ edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
+ 0x0000ffff, bcnt_rld << 16);
+ if (sync_mode == ASYNC)
+ edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
+ else
+ edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
+ /* Set the acount, bcount, ccount registers */
+ edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+ edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
+ }
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+ unsigned ctlr_from, ctlr_to;
+
+ ctlr_from = EDMA_CTLR(from);
+ from = EDMA_CHAN_SLOT(from);
+ ctlr_to = EDMA_CTLR(to);
+ to = EDMA_CHAN_SLOT(to);
+
+ if (from >= edma_cc[ctlr_from]->num_slots)
+ return;
+ if (to >= edma_cc[ctlr_to]->num_slots)
+ return;
+ edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
+ PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(from);
+ from = EDMA_CHAN_SLOT(from);
+
+ if (from >= edma_cc[ctlr]->num_slots)
+ return;
+ edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once. This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot >= edma_cc[ctlr]->num_slots)
+ return;
+ memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
+ PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(slot);
+ slot = EDMA_CHAN_SLOT(slot);
+
+ if (slot >= edma_cc[ctlr]->num_slots)
+ return;
+ memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+ PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel < edma_cc[ctlr]->num_channels) {
+ unsigned int mask = BIT(channel & 0x1f);
+
+ edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel < edma_cc[ctlr]->num_channels) {
+ unsigned int mask = BIT(channel & 0x1f);
+
+ edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_resume);
+
+int edma_trigger_channel(unsigned channel)
+{
+ unsigned ctlr;
+ unsigned int mask;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+ mask = BIT(channel & 0x1f);
+
+ edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask);
+
+ pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
+ edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5)));
+ return 0;
+}
+EXPORT_SYMBOL(edma_trigger_channel);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software. (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel < edma_cc[ctlr]->num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = BIT(channel & 0x1f);
+
+ /* EDMA channels without event association */
+ if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
+ pr_debug("EDMA: ESR%d %08x\n", j,
+ edma_shadow0_read_array(ctlr, SH_ESR, j));
+ edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
+ return 0;
+ }
+
+ /* EDMA channel with event association */
+ pr_debug("EDMA: ER%d %08x\n", j,
+ edma_shadow0_read_array(ctlr, SH_ER, j));
+ /* Clear any pending event or error */
+ edma_write_array(ctlr, EDMA_ECR, j, mask);
+ edma_write_array(ctlr, EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+ edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(ctlr, SH_EER, j));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared. The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel < edma_cc[ctlr]->num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = BIT(channel & 0x1f);
+
+ edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
+ edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
+ edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+ edma_write_array(ctlr, EDMA_EMCR, j, mask);
+
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(ctlr, SH_EER, j));
+
+ /* REVISIT: consider guarding against inappropriate event
+ * chaining by overwriting with dummy_paramset.
+ */
+ }
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ * ch_no - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel < edma_cc[ctlr]->num_channels) {
+ int j = (channel >> 5);
+ unsigned int mask = BIT(channel & 0x1f);
+
+ pr_debug("EDMA: EMR%d %08x\n", j,
+ edma_read_array(ctlr, EDMA_EMR, j));
+ edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
+ /* Clear the corresponding EMR bits */
+ edma_write_array(ctlr, EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+ edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
+ }
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ * channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel >= edma_cc[ctlr]->num_channels)
+ return;
+ if (channel < 32)
+ edma_write(ctlr, EDMA_ECR, BIT(channel));
+ else
+ edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*
+ * edma_assign_channel_eventq - move given channel to desired eventq
+ * Arguments:
+ * channel - channel number
+ * eventq_no - queue to move the channel
+ *
+ * Can be used to move a channel to a selected event queue.
+ */
+void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel >= edma_cc[ctlr]->num_channels)
+ return;
+
+ /* default to low priority queue */
+ if (eventq_no == EVENTQ_DEFAULT)
+ eventq_no = edma_cc[ctlr]->default_queue;
+ if (eventq_no >= edma_cc[ctlr]->num_tc)
+ return;
+
+ map_dmach_queue(ctlr, channel, eventq_no);
+}
+EXPORT_SYMBOL(edma_assign_channel_eventq);
+
+static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
+ struct edma *edma_cc, int cc_id)
+{
+ int i;
+ u32 value, cccfg;
+ s8 (*queue_priority_map)[2];
+
+ /* Decode the eDMA3 configuration from CCCFG register */
+ cccfg = edma_read(cc_id, EDMA_CCCFG);
+
+ value = GET_NUM_REGN(cccfg);
+ edma_cc->num_region = BIT(value);
+
+ value = GET_NUM_DMACH(cccfg);
+ edma_cc->num_channels = BIT(value + 1);
+
+ value = GET_NUM_PAENTRY(cccfg);
+ edma_cc->num_slots = BIT(value + 4);
+
+ value = GET_NUM_EVQUE(cccfg);
+ edma_cc->num_tc = value + 1;
+
+ dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id,
+ cccfg);
+ dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
+ dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
+ dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
+ dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
+
+ /* Nothing need to be done if queue priority is provided */
+ if (pdata->queue_priority_mapping)
+ return 0;
+
+ /*
+ * Configure TC/queue priority as follows:
+ * Q0 - priority 0
+ * Q1 - priority 1
+ * Q2 - priority 2
+ * ...
+ * The meaning of priority numbers: 0 highest priority, 7 lowest
+ * priority. So Q0 is the highest priority queue and the last queue has
+ * the lowest priority.
+ */
+ queue_priority_map = devm_kzalloc(dev,
+ (edma_cc->num_tc + 1) * sizeof(s8),
+ GFP_KERNEL);
+ if (!queue_priority_map)
+ return -ENOMEM;
+
+ for (i = 0; i < edma_cc->num_tc; i++) {
+ queue_priority_map[i][0] = i;
+ queue_priority_map[i][1] = i;
+ }
+ queue_priority_map[i][0] = -1;
+ queue_priority_map[i][1] = -1;
+
+ pdata->queue_priority_mapping = queue_priority_map;
+ /* Default queue has the lowest priority */
+ pdata->default_queue = i - 1;
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
+
+static int edma_xbar_event_map(struct device *dev, struct device_node *node,
+ struct edma_soc_info *pdata, size_t sz)
+{
+ const char pname[] = "ti,edma-xbar-event-map";
+ struct resource res;
+ void __iomem *xbar;
+ s16 (*xbar_chans)[2];
+ size_t nelm = sz / sizeof(s16);
+ u32 shift, offset, mux;
+ int ret, i;
+
+ xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
+ if (!xbar_chans)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(node, 1, &res);
+ if (ret)
+ return -ENOMEM;
+
+ xbar = devm_ioremap(dev, res.start, resource_size(&res));
+ if (!xbar)
+ return -ENOMEM;
+
+ ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
+ if (ret)
+ return -EIO;
+
+ /* Invalidate last entry for the other user of this mess */
+ nelm >>= 1;
+ xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
+
+ for (i = 0; i < nelm; i++) {
+ shift = (xbar_chans[i][1] & 0x03) << 3;
+ offset = xbar_chans[i][1] & 0xfffffffc;
+ mux = readl(xbar + offset);
+ mux &= ~(0xff << shift);
+ mux |= xbar_chans[i][0] << shift;
+ writel(mux, (xbar + offset));
+ }
+
+ pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
+ return 0;
+}
+
+static int edma_of_parse_dt(struct device *dev,
+ struct device_node *node,
+ struct edma_soc_info *pdata)
+{
+ int ret = 0;
+ struct property *prop;
+ size_t sz;
+ struct edma_rsv_info *rsv_info;
+
+ rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
+ if (!rsv_info)
+ return -ENOMEM;
+ pdata->rsv = rsv_info;
+
+ prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
+ if (prop)
+ ret = edma_xbar_event_map(dev, node, pdata, sz);
+
+ return ret;
+}
+
+static struct of_dma_filter_info edma_filter_info = {
+ .filter_fn = edma_filter_fn,
+};
+
+static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
+ struct device_node *node)
+{
+ struct edma_soc_info *info;
+ int ret;
+
+ info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL);
+ if (!info)
+ return ERR_PTR(-ENOMEM);
+
+ ret = edma_of_parse_dt(dev, node, info);
+ if (ret)
+ return ERR_PTR(ret);
+
+ dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+ dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
+ of_dma_controller_register(dev->of_node, of_dma_simple_xlate,
+ &edma_filter_info);
+
+ return info;
+}
+#else
+static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
+ struct device_node *node)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif
+
+static int edma_probe(struct platform_device *pdev)
+{
+ struct edma_soc_info **info = pdev->dev.platform_data;
+ struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL};
+ s8 (*queue_priority_mapping)[2];
+ int i, j, off, ln, found = 0;
+ int status = -1;
+ const s16 (*rsv_chans)[2];
+ const s16 (*rsv_slots)[2];
+ const s16 (*xbar_chans)[2];
+ int irq[EDMA_MAX_CC] = {0, 0};
+ int err_irq[EDMA_MAX_CC] = {0, 0};
+ struct resource *r[EDMA_MAX_CC] = {NULL};
+ struct resource res[EDMA_MAX_CC];
+ char res_name[10];
+ struct device_node *node = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ int ret;
+ struct platform_device_info edma_dev_info = {
+ .name = "edma-dma-engine",
+ .dma_mask = DMA_BIT_MASK(32),
+ .parent = &pdev->dev,
+ };
+
+ if (node) {
+ /* Check if this is a second instance registered */
+ if (arch_num_cc) {
+ dev_err(dev, "only one EDMA instance is supported via DT\n");
+ return -ENODEV;
+ }
+
+ ninfo[0] = edma_setup_info_from_dt(dev, node);
+ if (IS_ERR(ninfo[0])) {
+ dev_err(dev, "failed to get DT data\n");
+ return PTR_ERR(ninfo[0]);
+ }
+
+ info = ninfo;
+ }
+
+ if (!info)
+ return -ENODEV;
+
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "pm_runtime_get_sync() failed\n");
+ return ret;
+ }
+
+ for (j = 0; j < EDMA_MAX_CC; j++) {
+ if (!info[j]) {
+ if (!found)
+ return -ENODEV;
+ break;
+ }
+ if (node) {
+ ret = of_address_to_resource(node, j, &res[j]);
+ if (!ret)
+ r[j] = &res[j];
+ } else {
+ sprintf(res_name, "edma_cc%d", j);
+ r[j] = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM,
+ res_name);
+ }
+ if (!r[j]) {
+ if (found)
+ break;
+ else
+ return -ENODEV;
+ } else {
+ found = 1;
+ }
+
+ edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]);
+ if (IS_ERR(edmacc_regs_base[j]))
+ return PTR_ERR(edmacc_regs_base[j]);
+
+ edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma),
+ GFP_KERNEL);
+ if (!edma_cc[j])
+ return -ENOMEM;
+
+ /* Get eDMA3 configuration from IP */
+ ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j);
+ if (ret)
+ return ret;
+
+ edma_cc[j]->default_queue = info[j]->default_queue;
+
+ dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
+ edmacc_regs_base[j]);
+
+ for (i = 0; i < edma_cc[j]->num_slots; i++)
+ memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
+ &dummy_paramset, PARM_SIZE);
+
+ /* Mark all channels as unused */
+ memset(edma_cc[j]->edma_unused, 0xff,
+ sizeof(edma_cc[j]->edma_unused));
+
+ if (info[j]->rsv) {
+
+ /* Clear the reserved channels in unused list */
+ rsv_chans = info[j]->rsv->rsv_chans;
+ if (rsv_chans) {
+ for (i = 0; rsv_chans[i][0] != -1; i++) {
+ off = rsv_chans[i][0];
+ ln = rsv_chans[i][1];
+ clear_bits(off, ln,
+ edma_cc[j]->edma_unused);
+ }
+ }
+
+ /* Set the reserved slots in inuse list */
+ rsv_slots = info[j]->rsv->rsv_slots;
+ if (rsv_slots) {
+ for (i = 0; rsv_slots[i][0] != -1; i++) {
+ off = rsv_slots[i][0];
+ ln = rsv_slots[i][1];
+ set_bits(off, ln,
+ edma_cc[j]->edma_inuse);
+ }
+ }
+ }
+
+ /* Clear the xbar mapped channels in unused list */
+ xbar_chans = info[j]->xbar_chans;
+ if (xbar_chans) {
+ for (i = 0; xbar_chans[i][1] != -1; i++) {
+ off = xbar_chans[i][1];
+ clear_bits(off, 1,
+ edma_cc[j]->edma_unused);
+ }
+ }
+
+ if (node) {
+ irq[j] = irq_of_parse_and_map(node, 0);
+ err_irq[j] = irq_of_parse_and_map(node, 2);
+ } else {
+ char irq_name[10];
+
+ sprintf(irq_name, "edma%d", j);
+ irq[j] = platform_get_irq_byname(pdev, irq_name);
+
+ sprintf(irq_name, "edma%d_err", j);
+ err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+ }
+ edma_cc[j]->irq_res_start = irq[j];
+ edma_cc[j]->irq_res_end = err_irq[j];
+
+ status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
+ "edma", dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev,
+ "devm_request_irq %d failed --> %d\n",
+ irq[j], status);
+ return status;
+ }
+
+ status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
+ "edma_error", dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev,
+ "devm_request_irq %d failed --> %d\n",
+ err_irq[j], status);
+ return status;
+ }
+
+ for (i = 0; i < edma_cc[j]->num_channels; i++)
+ map_dmach_queue(j, i, info[j]->default_queue);
+
+ queue_priority_mapping = info[j]->queue_priority_mapping;
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(j,
+ queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ /* Map the channel to param entry if channel mapping logic
+ * exist
+ */
+ if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
+ map_dmach_param(j);
+
+ for (i = 0; i < edma_cc[j]->num_region; i++) {
+ edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
+ edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
+ edma_write_array(j, EDMA_QRAE, i, 0x0);
+ }
+ edma_cc[j]->info = info[j];
+ arch_num_cc++;
+
+ edma_dev_info.id = j;
+ platform_device_register_full(&edma_dev_info);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int edma_pm_resume(struct device *dev)
+{
+ int i, j;
+
+ for (j = 0; j < arch_num_cc; j++) {
+ struct edma *cc = edma_cc[j];
+
+ s8 (*queue_priority_mapping)[2];
+
+ queue_priority_mapping = cc->info->queue_priority_mapping;
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(j,
+ queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ /*
+ * Map the channel to param entry if channel mapping logic
+ * exist
+ */
+ if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
+ map_dmach_param(j);
+
+ for (i = 0; i < cc->num_channels; i++) {
+ if (test_bit(i, cc->edma_inuse)) {
+ /* ensure access through shadow region 0 */
+ edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
+ BIT(i & 0x1f));
+
+ setup_dma_interrupt(i,
+ cc->intr_data[i].callback,
+ cc->intr_data[i].data);
+ }
+ }
+ }
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops edma_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume)
+};
+
+static struct platform_driver edma_driver = {
+ .driver = {
+ .name = "edma",
+ .pm = &edma_pm_ops,
+ .of_match_table = edma_of_ids,
+ },
+ .probe = edma_probe,
+};
+
+static int __init edma_init(void)
+{
+ return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+