4 files changed, 18 insertions, 4 deletions
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index 43243be94..d4ae3b8e2 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -15,7 +15,7 @@
 #define AT91_IO_P2V(x) (x)
 #endif
 
-#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
+#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
 
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
@@ -24,7 +24,7 @@
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
-	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)
+	ldr	\rv, =AT91_DEBUG_UART_VIRT		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
index 619d8cc1a..92c44760d 100644
--- a/arch/arm/include/debug/imx.S
+++ b/arch/arm/include/debug/imx.S
@@ -11,6 +11,7 @@
  *
  */
 
+#include <asm/assembler.h>
 #include "imx-uart.h"
 
 /*
@@ -34,6 +35,7 @@
 		.endm
 
 		.macro	senduart,rd,rx
+		ARM_BE8(rev \rd, \rd)
 		str	\rd, [\rx, #0x40]	@ TXDATA
 		.endm
 
@@ -42,6 +44,7 @@
 
 		.macro	busyuart,rd,rx
 1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		ARM_BE8(rev \rd, \rd)
 		tst	\rd, #1 << 3		@ TXDC
 		beq	1002b			@ wait until transmit done
 		.endm
diff --git a/arch/arm/include/debug/palmchip.S b/arch/arm/include/debug/palmchip.S
new file mode 100644
index 000000000..6824b2d1c
--- /dev/null
+++ b/arch/arm/include/debug/palmchip.S
@@ -0,0 +1,11 @@
+#include <linux/serial_reg.h>
+
+#undef UART_TX
+#undef UART_LSR
+#undef UART_MSR
+
+#define UART_TX 1
+#define UART_LSR 7
+#define UART_MSR 8
+
+#include <debug/8250.S>
diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S
index de86b9247..060cb5b49 100644
--- a/arch/arm/include/debug/zynq.S
+++ b/arch/arm/include/debug/zynq.S
@@ -20,9 +20,9 @@
 #define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
 
 #define UART0_PHYS		0xE0000000
-#define UART0_VIRT		0xF0000000
+#define UART0_VIRT		0xF0800000
 #define UART1_PHYS		0xE0001000
-#define UART1_VIRT		0xF0001000
+#define UART1_VIRT		0xF0801000
 
 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
 # define LL_UART_PADDR		UART1_PHYS