summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r--arch/arm/mach-at91/Kconfig107
-rw-r--r--arch/arm/mach-at91/Makefile25
-rw-r--r--arch/arm/mach-at91/Makefile.boot8
-rw-r--r--arch/arm/mach-at91/at91rm9200.c49
-rw-r--r--arch/arm/mach-at91/at91sam9.c119
-rw-r--r--arch/arm/mach-at91/generic.h37
-rw-r--r--arch/arm/mach-at91/include/mach/at91_ramc.h28
-rw-r--r--arch/arm/mach-at91/include/mach/at91rm9200_mc.h116
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_smc.h98
-rw-r--r--arch/arm/mach-at91/pm.c447
-rw-r--r--arch/arm/mach-at91/pm.h30
-rw-r--r--arch/arm/mach-at91/pm_suspend.S337
-rw-r--r--arch/arm/mach-at91/sam9_smc.c136
-rw-r--r--arch/arm/mach-at91/sam9_smc.h11
-rw-r--r--arch/arm/mach-at91/sama5.c76
-rw-r--r--arch/arm/mach-at91/soc.c97
-rw-r--r--arch/arm/mach-at91/soc.h78
17 files changed, 1799 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
new file mode 100644
index 000000000..fd95f3494
--- /dev/null
+++ b/arch/arm/mach-at91/Kconfig
@@ -0,0 +1,107 @@
+menuconfig ARCH_AT91
+ bool "Atmel SoCs"
+ depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select COMMON_CLK_AT91
+ select PINCTRL
+ select PINCTRL_AT91
+ select SOC_BUS
+
+if ARCH_AT91
+config SOC_SAMA5D3
+ bool "SAMA5D3 family" if ARCH_MULTI_V7
+ select SOC_SAMA5
+ select HAVE_FB_ATMEL
+ select HAVE_AT91_UTMI
+ select HAVE_AT91_SMD
+ select HAVE_AT91_USB_CLK
+ help
+ Select this if you are using one of Atmel's SAMA5D3 family SoC.
+ This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
+
+config SOC_SAMA5D4
+ bool "SAMA5D4 family" if ARCH_MULTI_V7
+ select SOC_SAMA5
+ select CACHE_L2X0
+ select HAVE_FB_ATMEL
+ select HAVE_AT91_UTMI
+ select HAVE_AT91_SMD
+ select HAVE_AT91_USB_CLK
+ select HAVE_AT91_H32MX
+ help
+ Select this if you are using one of Atmel's SAMA5D4 family SoC.
+
+config SOC_AT91RM9200
+ bool "AT91RM9200" if ARCH_MULTI_V4T
+ select ATMEL_AIC_IRQ
+ select ATMEL_ST
+ select CPU_ARM920T
+ select HAVE_AT91_USB_CLK
+ select MIGHT_HAVE_PCI
+ select SOC_SAM_V4_V5
+ select SRAM if PM
+ help
+ Select this if you are using Atmel's AT91RM9200 SoC.
+
+config SOC_AT91SAM9
+ bool "AT91SAM9" if ARCH_MULTI_V5
+ select ATMEL_AIC_IRQ
+ select ATMEL_SDRAMC
+ select CPU_ARM926T
+ select HAVE_AT91_SMD
+ select HAVE_AT91_USB_CLK
+ select HAVE_AT91_UTMI
+ select HAVE_FB_ATMEL
+ select MEMORY
+ select SOC_SAM_V4_V5
+ select SRAM if PM
+ help
+ Select this if you are using one of those Atmel SoC:
+ AT91SAM9260
+ AT91SAM9261
+ AT91SAM9263
+ AT91SAM9G15
+ AT91SAM9G20
+ AT91SAM9G25
+ AT91SAM9G35
+ AT91SAM9G45
+ AT91SAM9G46
+ AT91SAM9M10
+ AT91SAM9M11
+ AT91SAM9N12
+ AT91SAM9RL
+ AT91SAM9X25
+ AT91SAM9X35
+ AT91SAM9XE
+
+config HAVE_AT91_UTMI
+ bool
+
+config HAVE_AT91_USB_CLK
+ bool
+
+config COMMON_CLK_AT91
+ bool
+ select COMMON_CLK
+
+config HAVE_AT91_SMD
+ bool
+
+config HAVE_AT91_H32MX
+ bool
+
+config SOC_SAM_V4_V5
+ bool
+
+config SOC_SAM_V7
+ bool
+
+config SOC_SAMA5
+ bool
+ select ATMEL_AIC5_IRQ
+ select ATMEL_SDRAMC
+ select MEMORY
+ select SOC_SAM_V7
+ select SRAM if PM
+
+endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
new file mode 100644
index 000000000..4fa8b4541
--- /dev/null
+++ b/arch/arm/mach-at91/Makefile
@@ -0,0 +1,25 @@
+#
+# Makefile for the linux kernel.
+#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
+obj-y := soc.o
+
+obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
+
+# CPU-specific support
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
+obj-$(CONFIG_SOC_SAMA5) += sama5.o
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += pm_suspend.o
+
+ifeq ($(CONFIG_CPU_V7),y)
+AFLAGS_pm_suspend.o := -march=armv7-a
+endif
+ifeq ($(CONFIG_PM_DEBUG),y)
+CFLAGS_pm.o += -DDEBUG
+endif
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
new file mode 100644
index 000000000..29ed0fa37
--- /dev/null
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -0,0 +1,8 @@
+# Note: the following conditions must always be true:
+# ZRELADDR == virt_to_phys(TEXTADDR)
+# PARAMS_PHYS must be within 4MB of ZRELADDR
+# INITRD_PHYS must be in RAM
+
+ zreladdr-y += 0x20008000
+params_phys-y := 0x20000100
+initrd_phys-y := 0x20410000
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
new file mode 100644
index 000000000..eaf58f88e
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -0,0 +1,49 @@
+/*
+ * Setup code for AT91RM9200
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ * 2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+#include "soc.h"
+
+static const struct at91_soc rm9200_socs[] = {
+ AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
+ { /* sentinel */ },
+};
+
+static void __init at91rm9200_dt_device_init(void)
+{
+ struct soc_device *soc;
+ struct device *soc_dev = NULL;
+
+ soc = at91_soc_init(rm9200_socs);
+ if (soc != NULL)
+ soc_dev = soc_device_to_device(soc);
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+
+ arm_pm_idle = at91rm9200_idle;
+ at91rm9200_pm_init();
+}
+
+static const char *at91rm9200_dt_board_compat[] __initconst = {
+ "atmel,at91rm9200",
+ NULL
+};
+
+DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
+ .init_machine = at91rm9200_dt_device_init,
+ .dt_compat = at91rm9200_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
new file mode 100644
index 000000000..e47a2093a
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -0,0 +1,119 @@
+/*
+ * Setup code for AT91SAM9
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+#include "soc.h"
+
+static const struct at91_soc at91sam9_socs[] = {
+ AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
+ AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
+ AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
+ AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
+ AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
+ "at91sam9m11", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
+ "at91sam9m10", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
+ "at91sam9g46", "at91sam9g45"),
+ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
+ "at91sam9g45", "at91sam9g45"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
+ "at91sam9g15", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
+ "at91sam9g35", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
+ "at91sam9x35", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
+ "at91sam9g25", "at91sam9x5"),
+ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
+ "at91sam9x25", "at91sam9x5"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
+ "at91sam9cn12", "at91sam9n12"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
+ "at91sam9n12", "at91sam9n12"),
+ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
+ "at91sam9cn11", "at91sam9n12"),
+ AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
+ AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
+ AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
+ { /* sentinel */ },
+};
+
+static void __init at91sam9_common_init(void)
+{
+ struct soc_device *soc;
+ struct device *soc_dev = NULL;
+
+ soc = at91_soc_init(at91sam9_socs);
+ if (soc != NULL)
+ soc_dev = soc_device_to_device(soc);
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+
+ arm_pm_idle = at91sam9_idle;
+}
+
+static void __init at91sam9_dt_device_init(void)
+{
+ at91sam9_common_init();
+ at91sam9260_pm_init();
+}
+
+static const char *at91_dt_board_compat[] __initconst = {
+ "atmel,at91sam9",
+ NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
+ /* Maintainer: Atmel */
+ .init_machine = at91sam9_dt_device_init,
+ .dt_compat = at91_dt_board_compat,
+MACHINE_END
+
+static void __init at91sam9g45_dt_device_init(void)
+{
+ at91sam9_common_init();
+ at91sam9g45_pm_init();
+}
+
+static const char *at91sam9g45_board_compat[] __initconst = {
+ "atmel,at91sam9g45",
+ NULL
+};
+
+DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
+ /* Maintainer: Atmel */
+ .init_machine = at91sam9g45_dt_device_init,
+ .dt_compat = at91sam9g45_board_compat,
+MACHINE_END
+
+static void __init at91sam9x5_dt_device_init(void)
+{
+ at91sam9_common_init();
+ at91sam9x5_pm_init();
+}
+
+static const char *at91sam9x5_board_compat[] __initconst = {
+ "atmel,at91sam9x5",
+ "atmel,at91sam9n12",
+ NULL
+};
+
+DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
+ /* Maintainer: Atmel */
+ .init_machine = at91sam9x5_dt_device_init,
+ .dt_compat = at91sam9x5_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
new file mode 100644
index 000000000..b0fa7dc72
--- /dev/null
+++ b/arch/arm/mach-at91/generic.h
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-at91/generic.h
+ *
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _AT91_GENERIC_H
+#define _AT91_GENERIC_H
+
+#include <linux/of.h>
+#include <linux/reboot.h>
+
+ /* Map io */
+extern void __init at91_map_io(void);
+extern void __init at91_alt_map_io(void);
+
+/* idle */
+extern void at91rm9200_idle(void);
+extern void at91sam9_idle(void);
+
+#ifdef CONFIG_PM
+extern void __init at91rm9200_pm_init(void);
+extern void __init at91sam9260_pm_init(void);
+extern void __init at91sam9g45_pm_init(void);
+extern void __init at91sam9x5_pm_init(void);
+#else
+static inline void __init at91rm9200_pm_init(void) { }
+static inline void __init at91sam9260_pm_init(void) { }
+static inline void __init at91sam9g45_pm_init(void) { }
+static inline void __init at91sam9x5_pm_init(void) { }
+#endif
+
+#endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h
new file mode 100644
index 000000000..493bc486e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_ramc.h
@@ -0,0 +1,28 @@
+/*
+ * Header file for the Atmel RAM Controller
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#ifndef __AT91_RAMC_H__
+#define __AT91_RAMC_H__
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_ramc_base[];
+
+#define at91_ramc_read(id, field) \
+ __raw_readl(at91_ramc_base[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+ __raw_writel(value, at91_ramc_base[id] + field)
+#else
+.extern at91_ramc_base
+#endif
+
+#include <soc/at91/at91rm9200_sdramc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
+
+#endif /* __AT91_RAMC_H__ */
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
new file mode 100644
index 000000000..aeaadfb45
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR 0x00 /* MC Remap Control Register */
+#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
+
+#define AT91_MC_ASR 0x04 /* MC Abort Status Register */
+#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
+#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
+#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
+#define AT91_MC_ABTSZ_BYTE (0 << 8)
+#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
+#define AT91_MC_ABTSZ_WORD (2 << 8)
+#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */
+#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
+#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
+#define AT91_MC_ABTTYP_FETCH (2 << 10)
+#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */
+#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */
+#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */
+#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */
+#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */
+#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */
+#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
+#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR 0x08 /* MC Abort Address Status Register */
+
+#define AT91_MC_MPR 0x0c /* MC Master Priority Register */
+#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
+#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
+#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
+#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA 0x60 /* Chip Select Assignment Register */
+#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
+#define AT91_EBI_CS0A_SMC (0 << 0)
+#define AT91_EBI_CS0A_BFC (1 << 0)
+#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_EBI_CS1A_SMC (0 << 1)
+#define AT91_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
+#define AT91_EBI_CS3A_SMC (0 << 3)
+#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
+#define AT91_EBI_CS4A_SMC (0 << 4)
+#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
+#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
+#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_CSR(n) (0x70 + ((n) * 4)) /* SMC Chip Select Register */
+#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
+#define AT91_SMC_NWS_(x) ((x) << 0)
+#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
+#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
+#define AT91_SMC_TDF_(x) ((x) << 8)
+#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
+#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
+#define AT91_SMC_DBW_16 (1 << 13)
+#define AT91_SMC_DBW_8 (2 << 13)
+#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
+#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
+#define AT91_SMC_ACSS_STD (0 << 16)
+#define AT91_SMC_ACSS_1 (1 << 16)
+#define AT91_SMC_ACSS_2 (2 << 16)
+#define AT91_SMC_ACSS_3 (3 << 16)
+#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
+#define AT91_SMC_RWSETUP_(x) ((x) << 24)
+#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
+#define AT91_SMC_RWHOLD_(x) ((x) << 28)
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR 0xc0 /* Mode Register */
+#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
+#define AT91_BFC_BFCOM_DISABLED (0 << 0)
+#define AT91_BFC_BFCOM_ASYNC (1 << 0)
+#define AT91_BFC_BFCOM_BURST (2 << 0)
+#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */
+#define AT91_BFC_BFCC_MCK (1 << 2)
+#define AT91_BFC_BFCC_DIV2 (2 << 2)
+#define AT91_BFC_BFCC_DIV4 (3 << 2)
+#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */
+#define AT91_BFC_PAGES (7 << 8) /* Page Size */
+#define AT91_BFC_PAGES_NO_PAGE (0 << 8)
+#define AT91_BFC_PAGES_16 (1 << 8)
+#define AT91_BFC_PAGES_32 (2 << 8)
+#define AT91_BFC_PAGES_64 (3 << 8)
+#define AT91_BFC_PAGES_128 (4 << 8)
+#define AT91_BFC_PAGES_256 (5 << 8)
+#define AT91_BFC_PAGES_512 (6 << 8)
+#define AT91_BFC_PAGES_1024 (7 << 8)
+#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */
+#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */
+#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */
+#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */
+#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
new file mode 100644
index 000000000..ff54a0ce9
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_smc.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SMC_H
+#define AT91SAM9_SMC_H
+
+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+ /* Setup register */
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
+
+ /* Pulse register */
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
+
+ /* Cycle register */
+ u16 read_cycle;
+ u16 write_cycle;
+
+ /* Mode register */
+ u32 mode;
+ u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
+#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
+
+#define AT91_SMC_PULSE 0x04 /* Pulse Register for CS n */
+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE 0x08 /* Cycle Register for CS n */
+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
+
+#define AT91_SMC_MODE 0x0c /* Mode Register for CS n */
+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
+#define AT91_SMC_BAT_SELECT (0 << 8)
+#define AT91_SMC_BAT_WRITE (1 << 8)
+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
+#define AT91_SMC_DBW_8 (0 << 12)
+#define AT91_SMC_DBW_16 (1 << 12)
+#define AT91_SMC_DBW_32 (2 << 12)
+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
+#define AT91_SMC_TDF_(x) ((x) << 16)
+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
+#define AT91_SMC_PS (3 << 28) /* Page Size */
+#define AT91_SMC_PS_4 (0 << 28)
+#define AT91_SMC_PS_8 (1 << 28)
+#define AT91_SMC_PS_16 (2 << 28)
+#define AT91_SMC_PS_32 (3 << 28)
+
+#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
new file mode 100644
index 000000000..5062699cb
--- /dev/null
+++ b/arch/arm/mach-at91/pm.c
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/mach-at91/pm.c
+ * AT91 Power Management
+ *
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/gpio.h>
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/genalloc.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk/at91_pmc.h>
+
+#include <asm/irq.h>
+#include <linux/atomic.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/fncpy.h>
+#include <asm/cacheflush.h>
+
+#include "generic.h"
+#include "pm.h"
+
+/*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+
+static struct {
+ unsigned long uhp_udp_mask;
+ int memctrl;
+} at91_pm_data;
+
+void __iomem *at91_ramc_base[2];
+
+static int at91_pm_valid_state(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_ON:
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+
+static suspend_state_t target_state;
+
+/*
+ * Called after processes are frozen, but before we shutdown devices.
+ */
+static int at91_pm_begin(suspend_state_t state)
+{
+ target_state = state;
+ return 0;
+}
+
+/*
+ * Verify that all the clocks are correct before entering
+ * slow-clock mode.
+ */
+static int at91_pm_verify_clocks(void)
+{
+ unsigned long scsr;
+ int i;
+
+ scsr = at91_pmc_read(AT91_PMC_SCSR);
+
+ /* USB must not be using PLLB */
+ if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
+ pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
+ return 0;
+ }
+
+ /* PCK0..PCK3 must be disabled, or configured to use clk32k */
+ for (i = 0; i < 4; i++) {
+ u32 css;
+
+ if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
+ continue;
+
+ css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+ if (css != AT91_PMC_CSS_SLOW) {
+ pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+/*
+ * Call this from platform driver suspend() to see how deeply to suspend.
+ * For example, some controllers (like OHCI) need one of the PLL clocks
+ * in order to act as a wakeup source, and those are not available when
+ * going into slow clock mode.
+ *
+ * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
+ * the very same problem (but not using at91 main_clk), and it'd be better
+ * to add one generic API rather than lots of platform-specific ones.
+ */
+int at91_suspend_entering_slow_clock(void)
+{
+ return (target_state == PM_SUSPEND_MEM);
+}
+EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
+
+static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
+ void __iomem *ramc1, int memctrl);
+
+extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
+ void __iomem *ramc1, int memctrl);
+extern u32 at91_pm_suspend_in_sram_sz;
+
+static void at91_pm_suspend(suspend_state_t state)
+{
+ unsigned int pm_data = at91_pm_data.memctrl;
+
+ pm_data |= (state == PM_SUSPEND_MEM) ?
+ AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+
+ flush_cache_all();
+ outer_disable();
+
+ at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
+ at91_ramc_base[1], pm_data);
+
+ outer_resume();
+}
+
+static int at91_pm_enter(suspend_state_t state)
+{
+ at91_pinctrl_gpio_suspend();
+
+ switch (state) {
+ /*
+ * Suspend-to-RAM is like STANDBY plus slow clock mode, so
+ * drivers must suspend more deeply, the master clock switches
+ * to the clk32k and turns off the main oscillator
+ */
+ case PM_SUSPEND_MEM:
+ /*
+ * Ensure that clocks are in a valid state.
+ */
+ if (!at91_pm_verify_clocks())
+ goto error;
+
+ at91_pm_suspend(state);
+
+ break;
+
+ /*
+ * STANDBY mode has *all* drivers suspended; ignores irqs not
+ * marked as 'wakeup' event sources; and reduces DRAM power.
+ * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
+ * nothing fancy done with main or cpu clocks.
+ */
+ case PM_SUSPEND_STANDBY:
+ at91_pm_suspend(state);
+ break;
+
+ case PM_SUSPEND_ON:
+ cpu_do_idle();
+ break;
+
+ default:
+ pr_debug("AT91: PM - bogus suspend state %d\n", state);
+ goto error;
+ }
+
+error:
+ target_state = PM_SUSPEND_ON;
+
+ at91_pinctrl_gpio_resume();
+ return 0;
+}
+
+/*
+ * Called right prior to thawing processes.
+ */
+static void at91_pm_end(void)
+{
+ target_state = PM_SUSPEND_ON;
+}
+
+
+static const struct platform_suspend_ops at91_pm_ops = {
+ .valid = at91_pm_valid_state,
+ .begin = at91_pm_begin,
+ .enter = at91_pm_enter,
+ .end = at91_pm_end,
+};
+
+static struct platform_device at91_cpuidle_device = {
+ .name = "cpuidle-at91",
+};
+
+static void at91_pm_set_standby(void (*at91_standby)(void))
+{
+ if (at91_standby)
+ at91_cpuidle_device.dev.platform_data = at91_standby;
+}
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+static void at91rm9200_standby(void)
+{
+ u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
+
+ asm volatile(
+ "b 1f\n\t"
+ ".align 5\n\t"
+ "1: mcr p15, 0, %0, c7, c10, 4\n\t"
+ " str %0, [%1, %2]\n\t"
+ " str %3, [%1, %4]\n\t"
+ " mcr p15, 0, %0, c7, c0, 4\n\t"
+ " str %5, [%1, %2]"
+ :
+ : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
+ "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+ "r" (lpr));
+}
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static void at91_ddr_standby(void)
+{
+ /* Those two values allow us to delay self-refresh activation
+ * to the maximum. */
+ u32 lpr0, lpr1 = 0;
+ u32 saved_lpr0, saved_lpr1 = 0;
+
+ if (at91_ramc_base[1]) {
+ saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+ lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+ }
+
+ saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+ lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+}
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static void at91sam9_sdram_standby(void)
+{
+ u32 lpr0, lpr1 = 0;
+ u32 saved_lpr0, saved_lpr1 = 0;
+
+ if (at91_ramc_base[1]) {
+ saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+ lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+ }
+
+ saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
+ lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
+}
+
+static const struct of_device_id ramc_ids[] __initconst = {
+ { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
+ { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
+ { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
+ { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+ { /*sentinel*/ }
+};
+
+static __init void at91_dt_ramc(void)
+{
+ struct device_node *np;
+ const struct of_device_id *of_id;
+ int idx = 0;
+ const void *standby = NULL;
+
+ for_each_matching_node_and_match(np, ramc_ids, &of_id) {
+ at91_ramc_base[idx] = of_iomap(np, 0);
+ if (!at91_ramc_base[idx])
+ panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+
+ if (!standby)
+ standby = of_id->data;
+
+ idx++;
+ }
+
+ if (!idx)
+ panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
+
+ if (!standby) {
+ pr_warn("ramc no standby function available\n");
+ return;
+ }
+
+ at91_pm_set_standby(standby);
+}
+
+static void __init at91_pm_sram_init(void)
+{
+ struct gen_pool *sram_pool;
+ phys_addr_t sram_pbase;
+ unsigned long sram_base;
+ struct device_node *node;
+ struct platform_device *pdev = NULL;
+
+ for_each_compatible_node(node, NULL, "mmio-sram") {
+ pdev = of_find_device_by_node(node);
+ if (pdev) {
+ of_node_put(node);
+ break;
+ }
+ }
+
+ if (!pdev) {
+ pr_warn("%s: failed to find sram device!\n", __func__);
+ return;
+ }
+
+ sram_pool = dev_get_gen_pool(&pdev->dev);
+ if (!sram_pool) {
+ pr_warn("%s: sram pool unavailable!\n", __func__);
+ return;
+ }
+
+ sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
+ if (!sram_base) {
+ pr_warn("%s: unable to alloc sram!\n", __func__);
+ return;
+ }
+
+ sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
+ at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
+ at91_pm_suspend_in_sram_sz, false);
+ if (!at91_suspend_sram_fn) {
+ pr_warn("SRAM: Could not map\n");
+ return;
+ }
+
+ /* Copy the pm suspend handler to SRAM */
+ at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
+ &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+}
+
+static void __init at91_pm_init(void)
+{
+ at91_pm_sram_init();
+
+ if (at91_cpuidle_device.dev.platform_data)
+ platform_device_register(&at91_cpuidle_device);
+
+ if (at91_suspend_sram_fn)
+ suspend_set_ops(&at91_pm_ops);
+ else
+ pr_info("AT91: PM not supported, due to no SRAM allocated\n");
+}
+
+void __init at91rm9200_pm_init(void)
+{
+ at91_dt_ramc();
+
+ /*
+ * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
+ */
+ at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+
+ at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
+ at91_pm_data.memctrl = AT91_MEMCTRL_MC;
+
+ at91_pm_init();
+}
+
+void __init at91sam9260_pm_init(void)
+{
+ at91_dt_ramc();
+ at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
+ at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+ return at91_pm_init();
+}
+
+void __init at91sam9g45_pm_init(void)
+{
+ at91_dt_ramc();
+ at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
+ at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+ return at91_pm_init();
+}
+
+void __init at91sam9x5_pm_init(void)
+{
+ at91_dt_ramc();
+ at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+ at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+ return at91_pm_init();
+}
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
new file mode 100644
index 000000000..ecd875a91
--- /dev/null
+++ b/arch/arm/mach-at91/pm.h
@@ -0,0 +1,30 @@
+/*
+ * AT91 Power Management
+ *
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ARCH_ARM_MACH_AT91_PM
+#define __ARCH_ARM_MACH_AT91_PM
+
+#include <asm/proc-fns.h>
+
+#include <mach/at91_ramc.h>
+
+#define AT91_MEMCTRL_MC 0
+#define AT91_MEMCTRL_SDRAMC 1
+#define AT91_MEMCTRL_DDRSDR 2
+
+#define AT91_PM_MEMTYPE_MASK 0x0f
+
+#define AT91_PM_MODE_OFFSET 4
+#define AT91_PM_MODE_MASK 0x01
+#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
+
+#define AT91_PM_SLOW_CLOCK 0x01
+
+#endif
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
new file mode 100644
index 000000000..bd22b2c8a
--- /dev/null
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -0,0 +1,337 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ * Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
+#include <mach/at91_ramc.h>
+#include "pm.h"
+
+#define SRAMC_SELF_FRESH_ACTIVE 0x01
+#define SRAMC_SELF_FRESH_EXIT 0x00
+
+pmc .req r0
+tmp1 .req r4
+tmp2 .req r5
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+ .macro wait_mckrdy
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MCKRDY
+ beq 1b
+ .endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+ .macro wait_moscrdy
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCS
+ beq 1b
+ .endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+ .macro wait_pllalock
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_LOCKA
+ beq 1b
+ .endm
+
+/*
+ * Put the processor to enter the idle state
+ */
+ .macro at91_cpu_idle
+
+#if defined(CONFIG_CPU_V7)
+ mov tmp1, #AT91_PMC_PCK
+ str tmp1, [pmc, #AT91_PMC_SCDR]
+
+ dsb
+
+ wfi @ Wait For Interrupt
+#else
+ mcr p15, 0, tmp1, c7, c0, 4
+#endif
+
+ .endm
+
+ .text
+
+ .arm
+
+/*
+ * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
+ * void __iomem *ramc1, int memctrl)
+ * @input param:
+ * @r0: base address of AT91_PMC
+ * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+ * @r2: base address of second SDRAM Controller or 0 if not present
+ * @r3: pm information
+ */
+ENTRY(at91_pm_suspend_in_sram)
+ /* Save registers on stack */
+ stmfd sp!, {r4 - r12, lr}
+
+ /* Drain write buffer */
+ mov tmp1, #0
+ mcr p15, 0, tmp1, c7, c10, 4
+
+ str r0, .pmc_base
+ str r1, .sramc_base
+ str r2, .sramc1_base
+
+ and r0, r3, #AT91_PM_MEMTYPE_MASK
+ str r0, .memtype
+
+ lsr r0, r3, #AT91_PM_MODE_OFFSET
+ and r0, r0, #AT91_PM_MODE_MASK
+ str r0, .pm_mode
+
+ /* Active the self-refresh mode */
+ mov r0, #SRAMC_SELF_FRESH_ACTIVE
+ bl at91_sramc_self_refresh
+
+ ldr r0, .pm_mode
+ tst r0, #AT91_PM_SLOW_CLOCK
+ beq skip_disable_main_clock
+
+ ldr pmc, .pmc_base
+
+ /* Save Master clock setting */
+ ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, .saved_mckr
+
+ /*
+ * Set the Master clock source to slow clock
+ */
+ bic tmp1, tmp1, #AT91_PMC_CSS
+ str tmp1, [pmc, #AT91_PMC_MCKR]
+
+ wait_mckrdy
+
+ /* Save PLLA setting and disable it */
+ ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
+ str tmp1, .saved_pllar
+
+ mov tmp1, #AT91_PMC_PLLCOUNT
+ orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
+ str tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+ /* Turn off the main oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ bic tmp1, tmp1, #AT91_PMC_MOSCEN
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+skip_disable_main_clock:
+ ldr pmc, .pmc_base
+
+ /* Wait for interrupt */
+ at91_cpu_idle
+
+ ldr r0, .pm_mode
+ tst r0, #AT91_PM_SLOW_CLOCK
+ beq skip_enable_main_clock
+
+ ldr pmc, .pmc_base
+
+ /* Turn on the main oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ orr tmp1, tmp1, #AT91_PMC_MOSCEN
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ wait_moscrdy
+
+ /* Restore PLLA setting */
+ ldr tmp1, .saved_pllar
+ str tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+ tst tmp1, #(AT91_PMC_MUL & 0xff0000)
+ bne 3f
+ tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
+ beq 4f
+3:
+ wait_pllalock
+4:
+
+ /*
+ * Restore master clock setting
+ */
+ ldr tmp1, .saved_mckr
+ str tmp1, [pmc, #AT91_PMC_MCKR]
+
+ wait_mckrdy
+
+skip_enable_main_clock:
+ /* Exit the self-refresh mode */
+ mov r0, #SRAMC_SELF_FRESH_EXIT
+ bl at91_sramc_self_refresh
+
+ /* Restore registers, and return */
+ ldmfd sp!, {r4 - r12, pc}
+ENDPROC(at91_pm_suspend_in_sram)
+
+/*
+ * void at91_sramc_self_refresh(unsigned int is_active)
+ *
+ * @input param:
+ * @r0: 1 - active self-refresh mode
+ * 0 - exit self-refresh mode
+ * register usage:
+ * @r1: memory type
+ * @r2: base address of the sram controller
+ */
+
+ENTRY(at91_sramc_self_refresh)
+ ldr r1, .memtype
+ ldr r2, .sramc_base
+
+ cmp r1, #AT91_MEMCTRL_MC
+ bne ddrc_sf
+
+ /*
+ * at91rm9200 Memory controller
+ */
+
+ /*
+ * For exiting the self-refresh mode, do nothing,
+ * automatically exit the self-refresh mode.
+ */
+ tst r0, #SRAMC_SELF_FRESH_ACTIVE
+ beq exit_sramc_sf
+
+ /* Active SDRAM self-refresh mode */
+ mov r3, #1
+ str r3, [r2, #AT91RM9200_SDRAMC_SRR]
+ b exit_sramc_sf
+
+ddrc_sf:
+ cmp r1, #AT91_MEMCTRL_DDRSDR
+ bne sdramc_sf
+
+ /*
+ * DDR Memory controller
+ */
+ tst r0, #SRAMC_SELF_FRESH_ACTIVE
+ beq ddrc_exit_sf
+
+ /* LPDDR1 --> force DDR2 mode during self-refresh */
+ ldr r3, [r2, #AT91_DDRSDRC_MDR]
+ str r3, .saved_sam9_mdr
+ bic r3, r3, #~AT91_DDRSDRC_MD
+ cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+ ldreq r3, [r2, #AT91_DDRSDRC_MDR]
+ biceq r3, r3, #AT91_DDRSDRC_MD
+ orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
+ streq r3, [r2, #AT91_DDRSDRC_MDR]
+
+ /* Active DDRC self-refresh mode */
+ ldr r3, [r2, #AT91_DDRSDRC_LPR]
+ str r3, .saved_sam9_lpr
+ bic r3, r3, #AT91_DDRSDRC_LPCB
+ orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+ /* If using the 2nd ddr controller */
+ ldr r2, .sramc1_base
+ cmp r2, #0
+ beq no_2nd_ddrc
+
+ ldr r3, [r2, #AT91_DDRSDRC_MDR]
+ str r3, .saved_sam9_mdr1
+ bic r3, r3, #~AT91_DDRSDRC_MD
+ cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+ ldreq r3, [r2, #AT91_DDRSDRC_MDR]
+ biceq r3, r3, #AT91_DDRSDRC_MD
+ orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
+ streq r3, [r2, #AT91_DDRSDRC_MDR]
+
+ /* Active DDRC self-refresh mode */
+ ldr r3, [r2, #AT91_DDRSDRC_LPR]
+ str r3, .saved_sam9_lpr1
+ bic r3, r3, #AT91_DDRSDRC_LPCB
+ orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+no_2nd_ddrc:
+ b exit_sramc_sf
+
+ddrc_exit_sf:
+ /* Restore MDR in case of LPDDR1 */
+ ldr r3, .saved_sam9_mdr
+ str r3, [r2, #AT91_DDRSDRC_MDR]
+ /* Restore LPR on AT91 with DDRAM */
+ ldr r3, .saved_sam9_lpr
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+ /* If using the 2nd ddr controller */
+ ldr r2, .sramc1_base
+ cmp r2, #0
+ ldrne r3, .saved_sam9_mdr1
+ strne r3, [r2, #AT91_DDRSDRC_MDR]
+ ldrne r3, .saved_sam9_lpr1
+ strne r3, [r2, #AT91_DDRSDRC_LPR]
+
+ b exit_sramc_sf
+
+ /*
+ * SDRAMC Memory controller
+ */
+sdramc_sf:
+ tst r0, #SRAMC_SELF_FRESH_ACTIVE
+ beq sdramc_exit_sf
+
+ /* Active SDRAMC self-refresh mode */
+ ldr r3, [r2, #AT91_SDRAMC_LPR]
+ str r3, .saved_sam9_lpr
+ bic r3, r3, #AT91_SDRAMC_LPCB
+ orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_SDRAMC_LPR]
+
+sdramc_exit_sf:
+ ldr r3, .saved_sam9_lpr
+ str r3, [r2, #AT91_SDRAMC_LPR]
+
+exit_sramc_sf:
+ mov pc, lr
+ENDPROC(at91_sramc_self_refresh)
+
+.pmc_base:
+ .word 0
+.sramc_base:
+ .word 0
+.sramc1_base:
+ .word 0
+.memtype:
+ .word 0
+.pm_mode:
+ .word 0
+.saved_mckr:
+ .word 0
+.saved_pllar:
+ .word 0
+.saved_sam9_lpr:
+ .word 0
+.saved_sam9_lpr1:
+ .word 0
+.saved_sam9_mdr:
+ .word 0
+.saved_sam9_mdr1:
+ .word 0
+
+ENTRY(at91_pm_suspend_in_sram_sz)
+ .word .-at91_pm_suspend_in_sram
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
new file mode 100644
index 000000000..826315af6
--- /dev/null
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -0,0 +1,136 @@
+/*
+ * linux/arch/arm/mach-at91/sam9_smc.c
+ *
+ * Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+
+
+#define AT91_SMC_CS(id, n) (smc_base_addr[id] + ((n) * 0x10))
+
+static void __iomem *smc_base_addr[2];
+
+static void sam9_smc_cs_write_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ __raw_writel(config->mode
+ | AT91_SMC_TDF_(config->tdf_cycles),
+ base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
+
+static void sam9_smc_cs_configure(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+
+ /* Setup register */
+ __raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
+ | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
+ | AT91_SMC_NRDSETUP_(config->nrd_setup)
+ | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
+ base + AT91_SMC_SETUP);
+
+ /* Pulse register */
+ __raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
+ | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
+ | AT91_SMC_NRDPULSE_(config->nrd_pulse)
+ | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
+ base + AT91_SMC_PULSE);
+
+ /* Cycle register */
+ __raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
+ | AT91_SMC_NRDCYCLE_(config->read_cycle),
+ base + AT91_SMC_CYCLE);
+
+ /* Mode register */
+ sam9_smc_cs_write_mode(base, config);
+}
+
+void sam9_smc_configure(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
+}
+EXPORT_SYMBOL_GPL(sam9_smc_configure);
+
+static void sam9_smc_cs_read_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+ config->mode = (val & ~AT91_SMC_NWECYCLE);
+ config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
+
+static void sam9_smc_cs_read(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val;
+
+ /* Setup register */
+ val = __raw_readl(base + AT91_SMC_SETUP);
+
+ config->nwe_setup = val & AT91_SMC_NWESETUP;
+ config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+ config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+ config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+ /* Pulse register */
+ val = __raw_readl(base + AT91_SMC_PULSE);
+
+ config->nwe_pulse = val & AT91_SMC_NWEPULSE;
+ config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+ config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+ config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+ /* Cycle register */
+ val = __raw_readl(base + AT91_SMC_CYCLE);
+
+ config->write_cycle = val & AT91_SMC_NWECYCLE;
+ config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+ /* Mode register */
+ sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
+void __init at91sam9_ioremap_smc(int id, u32 addr)
+{
+ if (id > 1) {
+ pr_warn("%s: id > 2\n", __func__);
+ return;
+ }
+ smc_base_addr[id] = ioremap(addr, 512);
+ if (!smc_base_addr[id])
+ pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
+}
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
new file mode 100644
index 000000000..3e52dcd4a
--- /dev/null
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -0,0 +1,11 @@
+/*
+ * linux/arch/arm/mach-at91/sam9_smc.
+ *
+ * Copyright (C) 2008 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
new file mode 100644
index 000000000..41d829d8e
--- /dev/null
+++ b/arch/arm/mach-at91/sama5.c
@@ -0,0 +1,76 @@
+/*
+ * Setup code for SAMA5
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+#include "soc.h"
+
+static const struct at91_soc sama5_socs[] = {
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
+ "sama5d31", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
+ "sama5d33", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
+ "sama5d34", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
+ "sama5d35", "sama5d3"),
+ AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
+ "sama5d36", "sama5d3"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
+ "sama5d41", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
+ "sama5d42", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
+ "sama5d43", "sama5d4"),
+ AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
+ "sama5d44", "sama5d4"),
+ { /* sentinel */ },
+};
+
+static void __init sama5_dt_device_init(void)
+{
+ struct soc_device *soc;
+ struct device *soc_dev = NULL;
+
+ soc = at91_soc_init(sama5_socs);
+ if (soc != NULL)
+ soc_dev = soc_device_to_device(soc);
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+ at91sam9x5_pm_init();
+}
+
+static const char *sama5_dt_board_compat[] __initconst = {
+ "atmel,sama5",
+ NULL
+};
+
+DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
+ /* Maintainer: Atmel */
+ .init_machine = sama5_dt_device_init,
+ .dt_compat = sama5_dt_board_compat,
+MACHINE_END
+
+static const char *sama5_alt_dt_board_compat[] __initconst = {
+ "atmel,sama5d4",
+ NULL
+};
+
+DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
+ /* Maintainer: Atmel */
+ .init_machine = sama5_dt_device_init,
+ .dt_compat = sama5_alt_dt_board_compat,
+ .l2c_aux_mask = ~0UL,
+MACHINE_END
diff --git a/arch/arm/mach-at91/soc.c b/arch/arm/mach-at91/soc.c
new file mode 100644
index 000000000..54343ffa3
--- /dev/null
+++ b/arch/arm/mach-at91/soc.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#define pr_fmt(fmt) "AT91: " fmt
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include "soc.h"
+
+#define AT91_DBGU_CIDR 0x40
+#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f)
+#define AT91_DBGU_CIDR_EXT BIT(31)
+#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0
+#define AT91_DBGU_EXID 0x44
+
+struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ const struct at91_soc *soc;
+ struct soc_device *soc_dev;
+ struct device_node *np;
+ void __iomem *regs;
+ u32 cidr, exid;
+
+ np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
+ if (!np)
+ np = of_find_compatible_node(NULL, NULL,
+ "atmel,at91sam9260-dbgu");
+
+ if (!np) {
+ pr_warn("Could not find DBGU node");
+ return NULL;
+ }
+
+ regs = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!regs) {
+ pr_warn("Could not map DBGU iomem range");
+ return NULL;
+ }
+
+ cidr = readl(regs + AT91_DBGU_CIDR);
+ exid = readl(regs + AT91_DBGU_EXID);
+
+ iounmap(regs);
+
+ for (soc = socs; soc->name; soc++) {
+ if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
+ continue;
+
+ if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
+ break;
+ }
+
+ if (!soc->name) {
+ pr_warn("Could not find matching SoC description\n");
+ return NULL;
+ }
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return NULL;
+
+ soc_dev_attr->family = soc->family;
+ soc_dev_attr->soc_id = soc->name;
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
+ AT91_DBGU_CIDR_VERSION(cidr));
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ pr_warn("Could not register SoC device\n");
+ return NULL;
+ }
+
+ if (soc->family)
+ pr_info("Detected SoC family: %s\n", soc->family);
+ pr_info("Detected SoC: %s, revision %X\n", soc->name,
+ AT91_DBGU_CIDR_VERSION(cidr));
+
+ return soc_dev;
+}
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
new file mode 100644
index 000000000..be23c4005
--- /dev/null
+++ b/arch/arm/mach-at91/soc.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#ifndef __AT91_SOC_H
+#define __AT91_SOC_H
+
+#include <linux/sys_soc.h>
+
+struct at91_soc {
+ u32 cidr_match;
+ u32 exid_match;
+ const char *name;
+ const char *family;
+};
+
+#define AT91_SOC(__cidr, __exid, __name, __family) \
+ { \
+ .cidr_match = (__cidr), \
+ .exid_match = (__exid), \
+ .name = (__name), \
+ .family = (__family), \
+ }
+
+struct soc_device * __init
+at91_soc_init(const struct at91_soc *socs);
+
+#define AT91RM9200_CIDR_MATCH 0x09290780
+
+#define AT91SAM9260_CIDR_MATCH 0x019803a0
+#define AT91SAM9261_CIDR_MATCH 0x019703a0
+#define AT91SAM9263_CIDR_MATCH 0x019607a0
+#define AT91SAM9G20_CIDR_MATCH 0x019905a0
+#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0
+#define AT91SAM9G45_CIDR_MATCH 0x019b05a0
+#define AT91SAM9X5_CIDR_MATCH 0x019a05a0
+#define AT91SAM9N12_CIDR_MATCH 0x019a07a0
+
+#define AT91SAM9M11_EXID_MATCH 0x00000001
+#define AT91SAM9M10_EXID_MATCH 0x00000002
+#define AT91SAM9G46_EXID_MATCH 0x00000003
+#define AT91SAM9G45_EXID_MATCH 0x00000004
+
+#define AT91SAM9G15_EXID_MATCH 0x00000000
+#define AT91SAM9G35_EXID_MATCH 0x00000001
+#define AT91SAM9X35_EXID_MATCH 0x00000002
+#define AT91SAM9G25_EXID_MATCH 0x00000003
+#define AT91SAM9X25_EXID_MATCH 0x00000004
+
+#define AT91SAM9CN12_EXID_MATCH 0x00000005
+#define AT91SAM9N12_EXID_MATCH 0x00000006
+#define AT91SAM9CN11_EXID_MATCH 0x00000009
+
+#define AT91SAM9XE128_CIDR_MATCH 0x329973a0
+#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0
+#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0
+
+#define SAMA5D3_CIDR_MATCH 0x0a5c07c0
+#define SAMA5D31_EXID_MATCH 0x00444300
+#define SAMA5D33_EXID_MATCH 0x00414300
+#define SAMA5D34_EXID_MATCH 0x00414301
+#define SAMA5D35_EXID_MATCH 0x00584300
+#define SAMA5D36_EXID_MATCH 0x00004301
+
+#define SAMA5D4_CIDR_MATCH 0x0a5c07c0
+#define SAMA5D41_EXID_MATCH 0x00000001
+#define SAMA5D42_EXID_MATCH 0x00000002
+#define SAMA5D43_EXID_MATCH 0x00000003
+#define SAMA5D44_EXID_MATCH 0x00000004
+
+#endif /* __AT91_SOC_H */