summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci/Kconfig')
-rw-r--r--arch/arm/mach-davinci/Kconfig260
1 files changed, 260 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
new file mode 100644
index 000000000..dd8f5312b
--- /dev/null
+++ b/arch/arm/mach-davinci/Kconfig
@@ -0,0 +1,260 @@
+if ARCH_DAVINCI
+
+config AINTC
+ bool
+
+config CP_INTC
+ bool
+ select IRQ_DOMAIN
+
+config ARCH_DAVINCI_DMx
+ bool
+ select CPU_ARM926T
+
+menu "TI DaVinci Implementations"
+
+comment "DaVinci Core Type"
+
+config ARCH_DAVINCI_DM644x
+ bool "DaVinci 644x based system"
+ select AINTC
+ select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DM355
+ bool "DaVinci 355 based system"
+ select AINTC
+ select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DM646x
+ bool "DaVinci 646x based system"
+ select AINTC
+ select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DA830
+ bool "DA830/OMAP-L137/AM17x based system"
+ depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+ select ARCH_DAVINCI_DA8XX
+ select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+ select CP_INTC
+
+config ARCH_DAVINCI_DA850
+ bool "DA850/OMAP-L138/AM18x based system"
+ depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+ select ARCH_DAVINCI_DA8XX
+ select CP_INTC
+
+config ARCH_DAVINCI_DA8XX
+ bool
+ select CPU_ARM926T
+
+config ARCH_DAVINCI_DM365
+ bool "DaVinci 365 based system"
+ select AINTC
+ select ARCH_DAVINCI_DMx
+
+comment "DaVinci Board Type"
+
+config MACH_DA8XX_DT
+ bool "Support DA8XX platforms using device tree"
+ default y
+ depends on ARCH_DAVINCI_DA8XX
+ select PINCTRL
+ help
+ Say y here to include support for TI DaVinci DA850 based using
+ Flattened Device Tree. More information at Documentation/devicetree
+
+config MACH_DAVINCI_EVM
+ bool "TI DM644x EVM"
+ default ARCH_DAVINCI_DM644x
+ depends on ARCH_DAVINCI_DM644x
+ select EEPROM_AT24
+ select I2C
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM644x EVM
+
+config MACH_SFFSDR
+ bool "Lyrtech SFFSDR"
+ depends on ARCH_DAVINCI_DM644x
+ select EEPROM_AT24
+ select I2C
+ help
+ Say Y here to select the Lyrtech Small Form Factor
+ Software Defined Radio (SFFSDR) board.
+
+config MACH_NEUROS_OSD2
+ bool "Neuros OSD2 Open Television Set Top Box"
+ depends on ARCH_DAVINCI_DM644x
+ help
+ Configure this option to specify the whether the board used
+ for development is a Neuros OSD2 Open Set Top Box.
+
+config MACH_DAVINCI_DM355_EVM
+ bool "TI DM355 EVM"
+ default ARCH_DAVINCI_DM355
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+ bool "DM355 Leopard board"
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+ bool "TI DM6467 EVM"
+ default ARCH_DAVINCI_DM646x
+ depends on ARCH_DAVINCI_DM646x
+ select EEPROM_AT24
+ select I2C
+ select MACH_DAVINCI_DM6467TEVM
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM6467 EVM
+
+config MACH_DAVINCI_DM6467TEVM
+ bool
+
+config MACH_DAVINCI_DM365_EVM
+ bool "TI DM365 EVM"
+ default ARCH_DAVINCI_DM365
+ depends on ARCH_DAVINCI_DM365
+ select EEPROM_AT24
+ select I2C
+ help
+ Configure this option to specify whether the board used
+ for development is a DM365 EVM
+
+config MACH_DAVINCI_DA830_EVM
+ bool "TI DA830/OMAP-L137/AM17x Reference Platform"
+ default ARCH_DAVINCI_DA830
+ depends on ARCH_DAVINCI_DA830
+ select EEPROM_AT24
+ select GPIO_PCF857X
+ select I2C
+ help
+ Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
+
+choice
+ prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
+ depends on MACH_DAVINCI_DA830_EVM
+ help
+ The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
+ detected automatically based on successful probe of the I2C
+ based GPIO expander on that board. This option selected in this
+ menu has an effect only in case of a successful UI card detection.
+
+config DA830_UI_LCD
+ bool "LCD"
+ help
+ Say Y here to use the LCD as a framebuffer or simple character
+ display.
+
+config DA830_UI_NAND
+ bool "NAND flash"
+ help
+ Say Y here to use the NAND flash. Do not forget to setup
+ the switch correctly.
+endchoice
+
+config MACH_DAVINCI_DA850_EVM
+ bool "TI DA850/OMAP-L138/AM18x Reference Platform"
+ default ARCH_DAVINCI_DA850
+ depends on ARCH_DAVINCI_DA850
+ help
+ Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
+
+choice
+ prompt "Select peripherals connected to expander on UI board"
+ depends on MACH_DAVINCI_DA850_EVM
+ help
+ The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
+ EVM is detected automatically based on successful probe of the I2C
+ based GPIO expander on that card. This option selected in this
+ menu has an effect only in case of a successful UI card detection.
+
+config DA850_UI_NONE
+ bool "No peripheral is enabled"
+ help
+ Say Y if you do not want to enable any of the peripherals connected
+ to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
+
+config DA850_UI_RMII
+ bool "RMII Ethernet PHY"
+ help
+ Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
+ EVM. This PHY is found on the UI daughter card that is supplied with
+ the EVM.
+ NOTE: Please take care while choosing this option, MII PHY will
+ not be functional if RMII mode is selected.
+
+config DA850_UI_SD_VIDEO_PORT
+ bool "Video Port Interface"
+ help
+ Say Y if you want to use Video Port Interface (VPIF) on the
+ DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
+ UI daughter card that is supplied with the EVM.
+
+endchoice
+
+config MACH_MITYOMAPL138
+ bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
+ depends on ARCH_DAVINCI_DA850
+ select EEPROM_AT24
+ select I2C
+ help
+ Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
+ System on Module. Information on this SoM may be found at
+ http://www.mitydsp.com
+
+config MACH_OMAPL138_HAWKBOARD
+ bool "TI AM1808 / OMAPL-138 Hawkboard platform"
+ depends on ARCH_DAVINCI_DA850
+ help
+ Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
+ Information of this board may be found at
+ http://www.hawkboard.org/
+
+config DAVINCI_MUX
+ bool "DAVINCI multiplexing support"
+ depends on ARCH_DAVINCI
+ default y
+ help
+ Pin multiplexing support for DAVINCI boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config DAVINCI_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on DAVINCI_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on DAVINCI_MUX
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_DAVINCI
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
+
+endmenu
+
+endif