diff options
Diffstat (limited to 'arch/arm/mach-davinci/sleep.S')
| -rw-r--r-- | arch/arm/mach-davinci/sleep.S | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S new file mode 100644 index 000000000..a5336a5e2 --- /dev/null +++ b/arch/arm/mach-davinci/sleep.S @@ -0,0 +1,228 @@ +/* + * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* replicated define because linux/bitops.h cannot be included in assembly */ +#define BIT(nr) (1 << (nr)) + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/psc.h> +#include <mach/ddr2.h> + +#include "clock.h" + +/* Arbitrary, hardware currently does not update PHYRDY correctly */ +#define PHYRDY_CYCLES 0x1000 + +/* Assume 25 MHz speed for the cycle conversions since PLLs are bypassed */ +#define PLL_BYPASS_CYCLES (PLL_BYPASS_TIME * 25) +#define PLL_RESET_CYCLES (PLL_RESET_TIME * 25) +#define PLL_LOCK_CYCLES (PLL_LOCK_TIME * 25) + +#define DEEPSLEEP_SLEEPENABLE_BIT BIT(31) + + .text +/* + * Move DaVinci into deep sleep state + * + * Note: This code is copied to internal SRAM by PM code. When the DaVinci + * wakes up it continues execution at the point it went to sleep. + * Register Usage: + * r0: contains virtual base for DDR2 controller + * r1: contains virtual base for DDR2 Power and Sleep controller (PSC) + * r2: contains PSC number for DDR2 + * r3: contains virtual base DDR2 PLL controller + * r4: contains virtual address of the DEEPSLEEP register + */ +ENTRY(davinci_cpu_suspend) + stmfd sp!, {r0-r12, lr} @ save registers on stack + + ldr ip, CACHE_FLUSH + blx ip + + ldmia r0, {r0-r4} + + /* + * Switch DDR to self-refresh mode. + */ + + /* calculate SDRCR address */ + ldr ip, [r0, #DDR2_SDRCR_OFFSET] + bic ip, ip, #DDR2_SRPD_BIT + orr ip, ip, #DDR2_LPMODEN_BIT + str ip, [r0, #DDR2_SDRCR_OFFSET] + + ldr ip, [r0, #DDR2_SDRCR_OFFSET] + orr ip, ip, #DDR2_MCLKSTOPEN_BIT + str ip, [r0, #DDR2_SDRCR_OFFSET] + + mov ip, #PHYRDY_CYCLES +1: subs ip, ip, #0x1 + bne 1b + + /* Disable DDR2 LPSC */ + mov r7, r0 + mov r0, #0x2 + bl davinci_ddr_psc_config + mov r0, r7 + + /* Disable clock to DDR PHY */ + ldr ip, [r3, #PLLDIV1] + bic ip, ip, #PLLDIV_EN + str ip, [r3, #PLLDIV1] + + /* Put the DDR PLL in bypass and power down */ + ldr ip, [r3, #PLLCTL] + bic ip, ip, #PLLCTL_PLLENSRC + bic ip, ip, #PLLCTL_PLLEN + str ip, [r3, #PLLCTL] + + /* Wait for PLL to switch to bypass */ + mov ip, #PLL_BYPASS_CYCLES +2: subs ip, ip, #0x1 + bne 2b + + /* Power down the PLL */ + ldr ip, [r3, #PLLCTL] + orr ip, ip, #PLLCTL_PLLPWRDN + str ip, [r3, #PLLCTL] + + /* Go to deep sleep */ + ldr ip, [r4] + orr ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT + /* System goes to sleep beyond after this instruction */ + str ip, [r4] + + /* Wake up from sleep */ + + /* Clear sleep enable */ + ldr ip, [r4] + bic ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT + str ip, [r4] + + /* initialize the DDR PLL controller */ + + /* Put PLL in reset */ + ldr ip, [r3, #PLLCTL] + bic ip, ip, #PLLCTL_PLLRST + str ip, [r3, #PLLCTL] + + /* Clear PLL power down */ + ldr ip, [r3, #PLLCTL] + bic ip, ip, #PLLCTL_PLLPWRDN + str ip, [r3, #PLLCTL] + + mov ip, #PLL_RESET_CYCLES +3: subs ip, ip, #0x1 + bne 3b + + /* Bring PLL out of reset */ + ldr ip, [r3, #PLLCTL] + orr ip, ip, #PLLCTL_PLLRST + str ip, [r3, #PLLCTL] + + /* Wait for PLL to lock (assume prediv = 1, 25MHz OSCIN) */ + mov ip, #PLL_LOCK_CYCLES +4: subs ip, ip, #0x1 + bne 4b + + /* Remove PLL from bypass mode */ + ldr ip, [r3, #PLLCTL] + bic ip, ip, #PLLCTL_PLLENSRC + orr ip, ip, #PLLCTL_PLLEN + str ip, [r3, #PLLCTL] + + /* Start 2x clock to DDR2 */ + + ldr ip, [r3, #PLLDIV1] + orr ip, ip, #PLLDIV_EN + str ip, [r3, #PLLDIV1] + + /* Enable VCLK */ + + /* Enable DDR2 LPSC */ + mov r7, r0 + mov r0, #0x3 + bl davinci_ddr_psc_config + mov r0, r7 + + /* clear MCLKSTOPEN */ + + ldr ip, [r0, #DDR2_SDRCR_OFFSET] + bic ip, ip, #DDR2_MCLKSTOPEN_BIT + str ip, [r0, #DDR2_SDRCR_OFFSET] + + ldr ip, [r0, #DDR2_SDRCR_OFFSET] + bic ip, ip, #DDR2_LPMODEN_BIT + str ip, [r0, #DDR2_SDRCR_OFFSET] + + /* Restore registers and return */ + ldmfd sp!, {r0-r12, pc} + +ENDPROC(davinci_cpu_suspend) + +/* + * Disables or Enables DDR2 LPSC + * Register Usage: + * r0: Enable or Disable LPSC r0 = 0x3 => Enable, r0 = 0x2 => Disable LPSC + * r1: contains virtual base for DDR2 Power and Sleep controller (PSC) + * r2: contains PSC number for DDR2 + */ +ENTRY(davinci_ddr_psc_config) + /* Set next state in mdctl for DDR2 */ + mov r6, #MDCTL + add r6, r6, r2, lsl #2 + ldr ip, [r1, r6] + bic ip, ip, #MDSTAT_STATE_MASK + orr ip, ip, r0 + str ip, [r1, r6] + + /* Enable the Power Domain Transition Command */ + ldr ip, [r1, #PTCMD] + orr ip, ip, #0x1 + str ip, [r1, #PTCMD] + + /* Check for Transition Complete (PTSTAT) */ +ptstat_done: + ldr ip, [r1, #PTSTAT] + and ip, ip, #0x1 + cmp ip, #0x0 + bne ptstat_done + + /* Check for DDR2 clock disable completion; */ + mov r6, #MDSTAT + add r6, r6, r2, lsl #2 +ddr2clk_stop_done: + ldr ip, [r1, r6] + and ip, ip, #MDSTAT_STATE_MASK + cmp ip, r0 + bne ddr2clk_stop_done + + ret lr +ENDPROC(davinci_ddr_psc_config) + +CACHE_FLUSH: +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif + +ENTRY(davinci_cpu_suspend_sz) + .word . - davinci_cpu_suspend +ENDPROC(davinci_cpu_suspend_sz) |