diff options
Diffstat (limited to 'arch/arm/mach-ebsa110/io.c')
| -rw-r--r-- | arch/arm/mach-ebsa110/io.c | 439 |
1 files changed, 439 insertions, 0 deletions
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c new file mode 100644 index 000000000..b57980b43 --- /dev/null +++ b/arch/arm/mach-ebsa110/io.c @@ -0,0 +1,439 @@ +/* + * linux/arch/arm/mach-ebsa110/isamem.c + * + * Copyright (C) 2001 Russell King + * + * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities" + * in the way it handles accesses to odd IO ports on 16-bit devices. These + * devices have their D0-D15 lines connected to the processors D0-D15 lines. + * Since they expect all byte IO operations to be performed on D0-D7, and the + * StrongARM expects to transfer the byte to these odd addresses on D8-D15, + * we must use a trick to get the required behaviour. + * + * The trick employed here is to use long word stores to odd address -1. The + * glue logic picks this up as a "trick" access, and asserts the LSB of the + * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the + * StrongARM transfers its data on D0-D7 as expected. + * + * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller + * wiring was screwed in such a way that it had limited memory space access. + * Luckily, the work-around for this is not too horrible. See + * __isamem_convert_addr for the details. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/page.h> + +static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr) +{ + u32 ret, a = (u32 __force) addr; + + /* + * The PCMCIA controller is wired up as follows: + * +---------+---------+---------+---------+---------+---------+ + * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | | + * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 | + * +---------+---------+---------+---------+---------+---------+ + * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | | + * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x | + * +---------+---------+---------+---------+---------+---------+ + * + * This means that we can access PCMCIA regions as follows: + * 0x*10000 -> 0x*1ffff + * 0x*70000 -> 0x*7ffff + * 0x*90000 -> 0x*9ffff + * 0x*f0000 -> 0x*fffff + */ + ret = (a & 0xf803fe) << 1; + ret |= (a & 0x03fc00) << 2; + + ret += 0xe8000000; + + if ((a & 0x20000) == (a & 0x40000) >> 1) + return (void __iomem *)ret; + + BUG(); + return NULL; +} + +/* + * read[bwl] and write[bwl] + */ +u8 __readb(const volatile void __iomem *addr) +{ + void __iomem *a = __isamem_convert_addr(addr); + u32 ret; + + if ((unsigned long)addr & 1) + ret = __raw_readl(a); + else + ret = __raw_readb(a); + return ret; +} + +u16 __readw(const volatile void __iomem *addr) +{ + void __iomem *a = __isamem_convert_addr(addr); + + if ((unsigned long)addr & 1) + BUG(); + + return __raw_readw(a); +} + +u32 __readl(const volatile void __iomem *addr) +{ + void __iomem *a = __isamem_convert_addr(addr); + u32 ret; + + if ((unsigned long)addr & 3) + BUG(); + + ret = __raw_readw(a); + ret |= __raw_readw(a + 4) << 16; + return ret; +} + +EXPORT_SYMBOL(__readb); +EXPORT_SYMBOL(__readw); +EXPORT_SYMBOL(__readl); + +void readsw(const volatile void __iomem *addr, void *data, int len) +{ + void __iomem *a = __isamem_convert_addr(addr); + + BUG_ON((unsigned long)addr & 1); + + __raw_readsw(a, data, len); +} +EXPORT_SYMBOL(readsw); + +void readsl(const volatile void __iomem *addr, void *data, int len) +{ + void __iomem *a = __isamem_convert_addr(addr); + + BUG_ON((unsigned long)addr & 3); + + __raw_readsl(a, data, len); +} +EXPORT_SYMBOL(readsl); + +void __writeb(u8 val, volatile void __iomem *addr) +{ + void __iomem *a = __isamem_convert_addr(addr); + + if ((unsigned long)addr & 1) + __raw_writel(val, a); + else + __raw_writeb(val, a); +} + +void __writew(u16 val, volatile void __iomem *addr) +{ + void __iomem *a = __isamem_convert_addr(addr); + + if ((unsigned long)addr & 1) + BUG(); + + __raw_writew(val, a); +} + +void __writel(u32 val, volatile void __iomem *addr) +{ + void __iomem *a = __isamem_convert_addr(addr); + + if ((unsigned long)addr & 3) + BUG(); + + __raw_writew(val, a); + __raw_writew(val >> 16, a + 4); +} + +EXPORT_SYMBOL(__writeb); +EXPORT_SYMBOL(__writew); +EXPORT_SYMBOL(__writel); + +void writesw(volatile void __iomem *addr, const void *data, int len) +{ + void __iomem *a = __isamem_convert_addr(addr); + + BUG_ON((unsigned long)addr & 1); + + __raw_writesw(a, data, len); +} +EXPORT_SYMBOL(writesw); + +void writesl(volatile void __iomem *addr, const void *data, int len) +{ + void __iomem *a = __isamem_convert_addr(addr); + + BUG_ON((unsigned long)addr & 3); + + __raw_writesl(a, data, len); +} +EXPORT_SYMBOL(writesl); + +/* + * The EBSA110 has a weird "ISA IO" region: + * + * Region 0 (addr = 0xf0000000 + io << 2) + * -------------------------------------------------------- + * Physical region IO region + * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 + * f0000e60 - f0000e64 398 - 399 + * f0000de0 - f0000dfc 378 - 37f lp0 + * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 + * + * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) + * -------------------------------------------------------- + * Physical region IO region + * f00014f1 a79 pnp write data + * f00007c0 - f00007c1 3e0 - 3e1 pcmcia + * f00004f1 279 pnp address + * f0000440 - f000046c 220 - 236 eth0 + * f0000405 203 pnp read data + */ +#define SUPERIO_PORT(p) \ + (((p) >> 3) == (0x3f8 >> 3) || \ + ((p) >> 3) == (0x2f8 >> 3) || \ + ((p) >> 3) == (0x378 >> 3)) + +/* + * We're addressing an 8 or 16-bit peripheral which tranfers + * odd addresses on the low ISA byte lane. + */ +u8 __inb8(unsigned int port) +{ + u32 ret; + + /* + * The SuperIO registers use sane addressing techniques... + */ + if (SUPERIO_PORT(port)) + ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2)); + else { + void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); + + /* + * Shame nothing else does + */ + if (port & 1) + ret = __raw_readl(a); + else + ret = __raw_readb(a); + } + return ret; +} + +/* + * We're addressing a 16-bit peripheral which transfers odd + * addresses on the high ISA byte lane. + */ +u8 __inb16(unsigned int port) +{ + unsigned int offset; + + /* + * The SuperIO registers use sane addressing techniques... + */ + if (SUPERIO_PORT(port)) + offset = port << 2; + else + offset = (port & ~1) << 1 | (port & 1); + + return __raw_readb((void __iomem *)ISAIO_BASE + offset); +} + +u16 __inw(unsigned int port) +{ + unsigned int offset; + + /* + * The SuperIO registers use sane addressing techniques... + */ + if (SUPERIO_PORT(port)) + offset = port << 2; + else { + offset = port << 1; + BUG_ON(port & 1); + } + return __raw_readw((void __iomem *)ISAIO_BASE + offset); +} + +/* + * Fake a 32-bit read with two 16-bit reads. Needed for 3c589. + */ +u32 __inl(unsigned int port) +{ + void __iomem *a; + + if (SUPERIO_PORT(port) || port & 3) + BUG(); + + a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); + + return __raw_readw(a) | __raw_readw(a + 4) << 16; +} + +EXPORT_SYMBOL(__inb8); +EXPORT_SYMBOL(__inb16); +EXPORT_SYMBOL(__inw); +EXPORT_SYMBOL(__inl); + +void __outb8(u8 val, unsigned int port) +{ + /* + * The SuperIO registers use sane addressing techniques... + */ + if (SUPERIO_PORT(port)) + __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2)); + else { + void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); + + /* + * Shame nothing else does + */ + if (port & 1) + __raw_writel(val, a); + else + __raw_writeb(val, a); + } +} + +void __outb16(u8 val, unsigned int port) +{ + unsigned int offset; + + /* + * The SuperIO registers use sane addressing techniques... + */ + if (SUPERIO_PORT(port)) + offset = port << 2; + else + offset = (port & ~1) << 1 | (port & 1); + + __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset); +} + +void __outw(u16 val, unsigned int port) +{ + unsigned int offset; + + /* + * The SuperIO registers use sane addressing techniques... + */ + if (SUPERIO_PORT(port)) + offset = port << 2; + else { + offset = port << 1; + BUG_ON(port & 1); + } + __raw_writew(val, (void __iomem *)ISAIO_BASE + offset); +} + +void __outl(u32 val, unsigned int port) +{ + BUG(); +} + +EXPORT_SYMBOL(__outb8); +EXPORT_SYMBOL(__outb16); +EXPORT_SYMBOL(__outw); +EXPORT_SYMBOL(__outl); + +void outsb(unsigned int port, const void *from, int len) +{ + u32 off; + + if (SUPERIO_PORT(port)) + off = port << 2; + else { + off = (port & ~1) << 1; + if (port & 1) + BUG(); + } + + __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len); +} + +void insb(unsigned int port, void *from, int len) +{ + u32 off; + + if (SUPERIO_PORT(port)) + off = port << 2; + else { + off = (port & ~1) << 1; + if (port & 1) + BUG(); + } + + __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len); +} + +EXPORT_SYMBOL(outsb); +EXPORT_SYMBOL(insb); + +void outsw(unsigned int port, const void *from, int len) +{ + u32 off; + + if (SUPERIO_PORT(port)) + off = port << 2; + else { + off = (port & ~1) << 1; + if (port & 1) + BUG(); + } + + __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len); +} + +void insw(unsigned int port, void *from, int len) +{ + u32 off; + + if (SUPERIO_PORT(port)) + off = port << 2; + else { + off = (port & ~1) << 1; + if (port & 1) + BUG(); + } + + __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len); +} + +EXPORT_SYMBOL(outsw); +EXPORT_SYMBOL(insw); + +/* + * We implement these as 16-bit insw/outsw, mainly for + * 3c589 cards. + */ +void outsl(unsigned int port, const void *from, int len) +{ + u32 off = port << 1; + + if (SUPERIO_PORT(port) || port & 3) + BUG(); + + __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1); +} + +void insl(unsigned int port, void *from, int len) +{ + u32 off = port << 1; + + if (SUPERIO_PORT(port) || port & 3) + BUG(); + + __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1); +} + +EXPORT_SYMBOL(outsl); +EXPORT_SYMBOL(insl); |