diff options
Diffstat (limited to 'arch/arm/mach-ep93xx/Kconfig')
| -rw-r--r-- | arch/arm/mach-ep93xx/Kconfig | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig new file mode 100644 index 000000000..bec570ae6 --- /dev/null +++ b/arch/arm/mach-ep93xx/Kconfig @@ -0,0 +1,200 @@ +if ARCH_EP93XX + +menu "Cirrus EP93xx Implementation Options" + +config EP93XX_SOC_COMMON + bool + default y + select SOC_BUS + select LEDS_GPIO_REGISTER + +config CRUNCH + bool "Support for MaverickCrunch" + help + Enable kernel support for MaverickCrunch. + +comment "EP93xx Platforms" + +choice + prompt "EP93xx first SDRAM bank selection" + default EP93XX_SDCE3_SYNC_PHYS_OFFSET + +config EP93XX_SDCE3_SYNC_PHYS_OFFSET + bool "0x00000000 - SDCE3/SyncBoot" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0x00000000. + +config EP93XX_SDCE0_PHYS_OFFSET + bool "0xc0000000 - SDCEO" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xc0000000. + +config EP93XX_SDCE1_PHYS_OFFSET + bool "0xd0000000 - SDCE1" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xd0000000. + +config EP93XX_SDCE2_PHYS_OFFSET + bool "0xe0000000 - SDCE2" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xe0000000. + +config EP93XX_SDCE3_ASYNC_PHYS_OFFSET + bool "0xf0000000 - SDCE3/AsyncBoot" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xf0000000. + +endchoice + +config MACH_ADSSPHERE + bool "Support ADS Sphere" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the ADS + Sphere board. + +config MACH_EDB93XX + bool + +config MACH_EDB9301 + bool "Support Cirrus Logic EDB9301" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9301 Evaluation Board. + +config MACH_EDB9302 + bool "Support Cirrus Logic EDB9302" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9302 Evaluation Board. + +config MACH_EDB9302A + bool "Support Cirrus Logic EDB9302A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9302A Evaluation Board. + +config MACH_EDB9307 + bool "Support Cirrus Logic EDB9307" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9307 Evaluation Board. + +config MACH_EDB9307A + bool "Support Cirrus Logic EDB9307A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9307A Evaluation Board. + +config MACH_EDB9312 + bool "Support Cirrus Logic EDB9312" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9312 Evaluation Board. + +config MACH_EDB9315 + bool "Support Cirrus Logic EDB9315" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9315 Evaluation Board. + +config MACH_EDB9315A + bool "Support Cirrus Logic EDB9315A" + depends on EP93XX_SDCE0_PHYS_OFFSET + select MACH_EDB93XX + help + Say 'Y' here if you want your kernel to support the Cirrus + Logic EDB9315A Evaluation Board. + +config MACH_GESBC9312 + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + bool "Support Glomation GESBC-9312-sx" + help + Say 'Y' here if you want your kernel to support the Glomation + GESBC-9312-sx board. + +config MACH_MICRO9 + bool + +config MACH_MICRO9H + bool "Support Contec Micro9-High" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Micro9-High board. + +config MACH_MICRO9M + bool "Support Contec Micro9-Mid" + depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Micro9-Mid board. + +config MACH_MICRO9L + bool "Support Contec Micro9-Lite" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Micro9-Lite board. + +config MACH_MICRO9S + bool "Support Contec Micro9-Slim" + depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Micro9-Slim board. + +config MACH_SIM_ONE + bool "Support Simplemachines Sim.One board" + depends on EP93XX_SDCE0_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the + Simplemachines Sim.One board. + +config MACH_SNAPPER_CL15 + bool "Support Bluewater Systems Snapper CL15 Module" + depends on EP93XX_SDCE0_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the Bluewater + Systems Snapper CL15 Module. + +config MACH_TS72XX + bool "Support Technologic Systems TS-72xx SBC" + depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the + Technologic Systems TS-72xx board. + +config MACH_VISION_EP9307 + bool "Support Vision Engraving Systems EP9307 SoM" + depends on EP93XX_SDCE0_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the + Vision Engraving Systems EP9307 SoM. + +endmenu + +endif |