summaryrefslogtreecommitdiff
path: root/arch/arm/mach-iop32x/n2100.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-iop32x/n2100.c')
-rw-r--r--arch/arm/mach-iop32x/n2100.c370
1 files changed, 370 insertions, 0 deletions
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
new file mode 100644
index 000000000..c1cd80ecc
--- /dev/null
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -0,0 +1,370 @@
+/*
+ * arch/arm/mach-iop32x/n2100.c
+ *
+ * Board support code for the Thecus N2100 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/f75375s.h>
+#include <linux/leds-pca9532.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+#include "gpio-iop32x.h"
+
+/*
+ * N2100 timer tick configuration.
+ */
+static void __init n2100_timer_init(void)
+{
+ /* 33.000 MHz crystal. */
+ iop_init_time(198000000);
+}
+
+
+/*
+ * N2100 I/O.
+ */
+static struct map_desc n2100_io_desc[] __initdata = {
+ { /* on-board devices */
+ .virtual = N2100_UART,
+ .pfn = __phys_to_pfn(N2100_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init n2100_map_io(void)
+{
+ iop3xx_map_io();
+ iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
+}
+
+
+/*
+ * N2100 PCI.
+ */
+static int __init
+n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (PCI_SLOT(dev->devfn) == 1) {
+ /* RTL8110SB #1 */
+ irq = IRQ_IOP32X_XINT0;
+ } else if (PCI_SLOT(dev->devfn) == 2) {
+ /* RTL8110SB #2 */
+ irq = IRQ_IOP32X_XINT3;
+ } else if (PCI_SLOT(dev->devfn) == 3) {
+ /* Sil3512 */
+ irq = IRQ_IOP32X_XINT2;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
+ /* VT6212 INTA */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
+ /* VT6212 INTB */
+ irq = IRQ_IOP32X_XINT0;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
+ /* VT6212 INTC */
+ irq = IRQ_IOP32X_XINT2;
+ } else if (PCI_SLOT(dev->devfn) == 5) {
+ /* Mini-PCI slot */
+ irq = IRQ_IOP32X_XINT3;
+ } else {
+ printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci n2100_pci __initdata = {
+ .nr_controllers = 1,
+ .ops = &iop3xx_ops,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .map_irq = n2100_pci_map_irq,
+};
+
+/*
+ * Both r8169 chips on the n2100 exhibit PCI parity problems. Set
+ * the ->broken_parity_status flag for both ports so that the r8169
+ * driver knows it should ignore error interrupts.
+ */
+static void n2100_fixup_r8169(struct pci_dev *dev)
+{
+ if (dev->bus->number == 0 &&
+ (dev->devfn == PCI_DEVFN(1, 0) ||
+ dev->devfn == PCI_DEVFN(2, 0)))
+ dev->broken_parity_status = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
+
+static int __init n2100_pci_init(void)
+{
+ if (machine_is_n2100())
+ pci_common_init(&n2100_pci);
+
+ return 0;
+}
+
+subsys_initcall(n2100_pci_init);
+
+
+/*
+ * N2100 machine initialisation.
+ */
+static struct physmap_flash_data n2100_flash_data = {
+ .width = 2,
+};
+
+static struct resource n2100_flash_resource = {
+ .start = 0xf0000000,
+ .end = 0xf0ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &n2100_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &n2100_flash_resource,
+};
+
+
+static struct plat_serial8250_port n2100_serial_port[] = {
+ {
+ .mapbase = N2100_UART,
+ .membase = (char *)N2100_UART,
+ .irq = 0,
+ .flags = UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 1843200,
+ },
+ { },
+};
+
+static struct resource n2100_uart_resource = {
+ .start = N2100_UART,
+ .end = N2100_UART + 7,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = n2100_serial_port,
+ },
+ .num_resources = 1,
+ .resource = &n2100_uart_resource,
+};
+
+static struct f75375s_platform_data n2100_f75375s = {
+ .pwm = { 255, 255 },
+ .pwm_enable = { 0, 0 },
+};
+
+static struct pca9532_platform_data n2100_leds = {
+ .leds = {
+ { .name = "n2100:red:satafail0",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .name = "n2100:red:satafail1",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .name = "n2100:blue:usb",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .type = PCA9532_TYPE_NONE },
+
+ { .type = PCA9532_TYPE_NONE },
+ { .type = PCA9532_TYPE_NONE },
+ { .type = PCA9532_TYPE_NONE },
+ { .name = "n2100:red:usb",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+
+ { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */
+ { .type = PCA9532_TYPE_NONE }, /* reset gpio */
+ { .type = PCA9532_TYPE_NONE },
+ { .type = PCA9532_TYPE_NONE },
+
+ { .type = PCA9532_TYPE_NONE },
+ { .name = "n2100:orange:system",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .name = "n2100:red:system",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .name = "N2100 beeper" ,
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_N2100_BEEP,
+ },
+ },
+ .psc = { 0, 0 },
+ .pwm = { 0, 0 },
+};
+
+static struct i2c_board_info __initdata n2100_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rs5c372b", 0x32),
+ },
+ {
+ I2C_BOARD_INFO("f75375", 0x2e),
+ .platform_data = &n2100_f75375s,
+ },
+ {
+ I2C_BOARD_INFO("pca9532", 0x60),
+ .platform_data = &n2100_leds,
+ },
+};
+
+/*
+ * Pull PCA9532 GPIO #8 low to power off the machine.
+ */
+static void n2100_power_off(void)
+{
+ local_irq_disable();
+
+ /* Start condition, I2C address of PCA9532, write transaction. */
+ *IOP3XX_IDBR0 = 0xc0;
+ *IOP3XX_ICR0 = 0xe9;
+ mdelay(1);
+
+ /* Write address 0x08. */
+ *IOP3XX_IDBR0 = 0x08;
+ *IOP3XX_ICR0 = 0xe8;
+ mdelay(1);
+
+ /* Write data 0x01, stop condition. */
+ *IOP3XX_IDBR0 = 0x01;
+ *IOP3XX_ICR0 = 0xea;
+
+ while (1)
+ ;
+}
+
+static void n2100_restart(enum reboot_mode mode, const char *cmd)
+{
+ int ret;
+
+ ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
+ if (ret) {
+ pr_crit("could not drive reset GPIO low\n");
+ return;
+ }
+ /* Wait for reset to happen */
+ while (1)
+ ;
+}
+
+
+static struct timer_list power_button_poll_timer;
+
+static void power_button_poll(unsigned long dummy)
+{
+ if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
+ ctrl_alt_del();
+ return;
+ }
+
+ power_button_poll_timer.expires = jiffies + (HZ / 10);
+ add_timer(&power_button_poll_timer);
+}
+
+static int __init n2100_request_gpios(void)
+{
+ int ret;
+
+ if (!machine_is_n2100())
+ return 0;
+
+ ret = gpio_request(N2100_HARDWARE_RESET, "reset");
+ if (ret)
+ pr_err("could not request reset GPIO\n");
+
+ ret = gpio_request(N2100_POWER_BUTTON, "power");
+ if (ret)
+ pr_err("could not request power GPIO\n");
+ else {
+ ret = gpio_direction_input(N2100_POWER_BUTTON);
+ if (ret)
+ pr_err("could not set power GPIO as input\n");
+ }
+ /* Set up power button poll timer */
+ init_timer(&power_button_poll_timer);
+ power_button_poll_timer.function = power_button_poll;
+ power_button_poll_timer.expires = jiffies + (HZ / 10);
+ add_timer(&power_button_poll_timer);
+ return 0;
+}
+device_initcall(n2100_request_gpios);
+
+static void __init n2100_init_machine(void)
+{
+ register_iop32x_gpio();
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&n2100_flash_device);
+ platform_device_register(&n2100_serial_device);
+ platform_device_register(&iop3xx_dma_0_channel);
+ platform_device_register(&iop3xx_dma_1_channel);
+
+ i2c_register_board_info(0, n2100_i2c_devices,
+ ARRAY_SIZE(n2100_i2c_devices));
+
+ pm_power_off = n2100_power_off;
+}
+
+MACHINE_START(N2100, "Thecus N2100")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .atag_offset = 0x100,
+ .map_io = n2100_map_io,
+ .init_irq = iop32x_init_irq,
+ .init_time = n2100_timer_init,
+ .init_machine = n2100_init_machine,
+ .restart = n2100_restart,
+MACHINE_END