summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1/board-innovator.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/board-innovator.c')
-rw-r--r--arch/arm/mach-omap1/board-innovator.c463
1 files changed, 463 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
new file mode 100644
index 000000000..c49ce83cc
--- /dev/null
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -0,0 +1,463 @@
+/*
+ * linux/arch/arm/mach-omap1/board-innovator.c
+ *
+ * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/smc91x.h>
+#include <linux/omapfb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mux.h>
+#include <mach/flash.h>
+#include <mach/tc.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "mmc.h"
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START 0x04000300
+
+static const unsigned int innovator_keymap[] = {
+ KEY(0, 0, KEY_F1),
+ KEY(3, 0, KEY_DOWN),
+ KEY(1, 1, KEY_F2),
+ KEY(2, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_F3),
+ KEY(1, 2, KEY_F4),
+ KEY(2, 2, KEY_UP),
+ KEY(2, 3, KEY_ENTER),
+ KEY(3, 3, KEY_LEFT),
+};
+
+static struct mtd_partition innovator_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* rest of flash1 is a file system */
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_16M - SZ_2M - 2 * SZ_128K,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data innovator_flash_data = {
+ .width = 2,
+ .set_vpp = omap1_set_vpp,
+ .parts = innovator_partitions,
+ .nr_parts = ARRAY_SIZE(innovator_partitions),
+};
+
+static struct resource innovator_flash_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device innovator_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &innovator_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &innovator_flash_resource,
+};
+
+static struct resource innovator_kp_resources[] = {
+ [0] = {
+ .start = INT_KEYBOARD,
+ .end = INT_KEYBOARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct matrix_keymap_data innovator_keymap_data = {
+ .keymap = innovator_keymap,
+ .keymap_size = ARRAY_SIZE(innovator_keymap),
+};
+
+static struct omap_kp_platform_data innovator_kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap_data = &innovator_keymap_data,
+ .delay = 4,
+};
+
+static struct platform_device innovator_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &innovator_kp_data,
+ },
+ .num_resources = ARRAY_SIZE(innovator_kp_resources),
+ .resource = innovator_kp_resources,
+};
+
+static struct smc91x_platdata innovator_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
+#ifdef CONFIG_ARCH_OMAP15XX
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc innovator1510_io_desc[] __initdata = {
+ {
+ .virtual = OMAP1510_FPGA_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_FPGA_START),
+ .length = OMAP1510_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static struct resource innovator1510_smc91x_resources[] = {
+ [0] = {
+ .start = OMAP1510_FPGA_ETHR_START, /* Physical */
+ .end = OMAP1510_FPGA_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP1510_INT_ETHER,
+ .end = OMAP1510_INT_ETHER,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device innovator1510_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .platform_data = &innovator_smc91x_info,
+ },
+ .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources),
+ .resource = innovator1510_smc91x_resources,
+};
+
+static struct platform_device innovator1510_lcd_device = {
+ .name = "lcd_inn1510",
+ .id = -1,
+};
+
+static struct platform_device innovator1510_spi_device = {
+ .name = "spi_inn1510",
+ .id = -1,
+};
+
+static struct platform_device *innovator1510_devices[] __initdata = {
+ &innovator_flash_device,
+ &innovator1510_smc91x_device,
+ &innovator_kp_device,
+ &innovator1510_lcd_device,
+ &innovator1510_spi_device,
+};
+
+static int innovator_get_pendown_state(void)
+{
+ return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+}
+
+static const struct ads7846_platform_data innovator1510_ts_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = innovator_get_pendown_state,
+};
+
+static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
+ /* FPGA (bus "10") CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &innovator1510_ts_info,
+ .irq = OMAP1510_INT_FPGA_TS,
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 10,
+ .chip_select = 0,
+} };
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#ifdef CONFIG_ARCH_OMAP16XX
+
+static struct resource innovator1610_smc91x_resources[] = {
+ [0] = {
+ .start = INNOVATOR1610_ETHR_START, /* Physical */
+ .end = INNOVATOR1610_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device innovator1610_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .platform_data = &innovator_smc91x_info,
+ },
+ .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources),
+ .resource = innovator1610_smc91x_resources,
+};
+
+static struct platform_device innovator1610_lcd_device = {
+ .name = "inn1610_lcd",
+ .id = -1,
+};
+
+static struct platform_device *innovator1610_devices[] __initdata = {
+ &innovator_flash_device,
+ &innovator1610_smc91x_device,
+ &innovator_kp_device,
+ &innovator1610_lcd_device,
+};
+
+#endif /* CONFIG_ARCH_OMAP16XX */
+
+static void __init innovator_init_smc91x(void)
+{
+ if (cpu_is_omap1510()) {
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
+ OMAP1510_FPGA_RST);
+ udelay(750);
+ } else {
+ if (gpio_request(0, "SMC91x irq") < 0) {
+ printk("Error requesting gpio 0 for smc91x irq\n");
+ return;
+ }
+ }
+}
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct omap_usb_config innovator1510_usb_config __initdata = {
+ /* for bundled non-standard host and peripheral cables */
+ .hmc_mode = 4,
+
+ .register_host = 1,
+ .pins[1] = 6,
+ .pins[2] = 6, /* Conflicts with UART2 */
+
+ .register_dev = 1,
+ .pins[0] = 2,
+};
+
+static struct omap_lcd_config innovator1510_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_usb_config h2_usb_config __initdata = {
+ /* usb1 has a Mini-AB port and external isp1301 transceiver */
+ .otg = 2,
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+ .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
+ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
+#endif
+
+ .pins[1] = 3,
+};
+
+static struct omap_lcd_config innovator1610_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+#endif
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static int mmc_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ if (power_on)
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
+ OMAP1510_FPGA_POWER);
+ else
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
+ OMAP1510_FPGA_POWER);
+
+ return 0;
+}
+
+/*
+ * Innovator could use the following functions tested:
+ * - mmc_get_wp that uses OMAP_MPUIO(3)
+ * - mmc_get_cover_state that uses FPGA F4 UIO43
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+ .nr_slots = 1,
+ .slots[0] = {
+ .set_power = mmc_set_power,
+ .wires = 4,
+ .name = "mmcblk",
+ },
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
+static void __init innovator_mmc_init(void)
+{
+ mmc_data[0] = &mmc1_data;
+ omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
+}
+
+#else
+static inline void innovator_mmc_init(void)
+{
+}
+#endif
+
+static void __init innovator_init(void)
+{
+ if (cpu_is_omap1510())
+ omap1510_fpga_init_irq();
+ innovator_init_smc91x();
+
+#ifdef CONFIG_ARCH_OMAP15XX
+ if (cpu_is_omap1510()) {
+ unsigned char reg;
+
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM1_EN;
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM2_EN;
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+
+ platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+ spi_register_board_info(innovator1510_boardinfo,
+ ARRAY_SIZE(innovator1510_boardinfo));
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+ if (!cpu_is_omap1510()) {
+ innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
+ innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
+ platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
+ }
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+ if (cpu_is_omap1510()) {
+ omap1_usb_init(&innovator1510_usb_config);
+ omapfb_set_lcd_config(&innovator1510_lcd_config);
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+ if (cpu_is_omap1610()) {
+ omap1_usb_init(&h2_usb_config);
+ omapfb_set_lcd_config(&innovator1610_lcd_config);
+ }
+#endif
+ omap_serial_init();
+ omap_register_i2c_bus(1, 100, NULL, 0);
+ innovator_mmc_init();
+}
+
+/*
+ * REVISIT: Assume 15xx for now, we don't want to do revision check
+ * until later on. The right way to fix this is to set up a different
+ * machine_id for 16xx Innovator, or use device tree.
+ */
+static void __init innovator_map_io(void)
+{
+#ifdef CONFIG_ARCH_OMAP15XX
+ omap15xx_map_io();
+
+ iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+ udelay(10); /* Delay needed for FPGA */
+
+ /* Dump the Innovator FPGA rev early - useful info for support. */
+ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
+ __raw_readb(OMAP1510_FPGA_REV_HIGH),
+ __raw_readb(OMAP1510_FPGA_REV_LOW),
+ __raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
+}
+
+MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
+ /* Maintainer: MontaVista Software, Inc. */
+ .atag_offset = 0x100,
+ .map_io = innovator_map_io,
+ .init_early = omap1_init_early,
+ .init_irq = omap1_init_irq,
+ .init_machine = innovator_init,
+ .init_late = omap1_init_late,
+ .init_time = omap1_timer_init,
+ .restart = omap1_restart,
+MACHINE_END