summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/prm2xxx_3xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/prm2xxx_3xxx.c')
-rw-r--r--arch/arm/mach-omap2/prm2xxx_3xxx.c240
1 files changed, 240 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
new file mode 100644
index 000000000..cc3341f26
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -0,0 +1,240 @@
+/*
+ * OMAP2/3 PRM module functions
+ *
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * BenoƮt Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "powerdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "prm-regbits-24xx.h"
+#include "clockdomain.h"
+
+/**
+ * omap2_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @shift: register bit shift corresponding to the reset line to check
+ * @part: PRM partition, ignored for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @offset: register offset, ignored for OMAP2
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL if called while running on a non-OMAP2/3 chip.
+ */
+int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+ return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
+ (1 << shift));
+}
+
+/**
+ * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @shift: register bit shift corresponding to the reset line to assert
+ * @part: PRM partition, ignored for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @offset: register offset, ignored for OMAP2
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * place the submodule into reset. Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+ u32 mask;
+
+ mask = 1 << shift;
+ omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
+
+ return 0;
+}
+
+/**
+ * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @rst_shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: register bit shift for the status of the deasserted submodule
+ * @part: PRM partition, not used for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @rst_offset: reset register offset, not used for OMAP2
+ * @st_offset: reset status register offset, not used for OMAP2
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning. Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
+ s16 prm_mod, u16 rst_offset, u16 st_offset)
+{
+ u32 rst, st;
+ int c;
+
+ rst = 1 << rst_shift;
+ st = 1 << st_shift;
+
+ /* Check the current status to avoid de-asserting the line twice */
+ if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, rst) == 0)
+ return -EEXIST;
+
+ /* Clear the reset status by writing 1 to the status bit */
+ omap2_prm_rmw_mod_reg_bits(0xffffffff, st, prm_mod, OMAP2_RM_RSTST);
+ /* de-assert the reset control line */
+ omap2_prm_rmw_mod_reg_bits(rst, 0, prm_mod, OMAP2_RM_RSTCTRL);
+ /* wait the status to be set */
+ omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
+ st),
+ MAX_MODULE_HARDRESET_WAIT, c);
+
+ return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+
+
+/* Powerdomain low-level functions */
+
+/* Common functions across OMAP2 and OMAP3 */
+int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+ omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
+}
+
+int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
+}
+
+int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
+
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
+ m);
+}
+
+int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL, m);
+}
+
+int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 v;
+
+ v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK);
+ omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
+}
+
+int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
+ OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ return 0;
+}
+
+int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ return 0;
+}
+
+int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+ PM_WKDEP, (1 << clkdm2->dep_bit));
+}
+
+/* XXX Caller must hold the clkdm's powerdomain lock */
+int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ /* PRM accesses are slow, so minimize them */
+ mask |= 1 << cd->clkdm->dep_bit;
+ cd->wkdep_usecount = 0;
+ }
+
+ omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+ PM_WKDEP);
+ return 0;
+}
+